|
| 1 | B/R ItemsExcavating in trenches in soft/loose soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out. in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | Excavating inpost holes( or similar holes) each n exc0.50 cum , getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed. |
| 4 | Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 5 | M&L for Sand filling under floors or in foundationincluding watering and consolidatedand compacted with clean dry sand complete all as specified and directed. |
| 6 | Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 7 | M&L for hardcore of gauge n.exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed. |
| 8 | M&L for cement concrete type D2, 1:4:8using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed. |
| 9 | M&L for PCC 1:3:6using 40mm graded stone aggregate, type C2 asin foundation filling & mass concrete complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4using 40mm graded stone aggregate, type B2 asin foundation filling & mass concrete complete all as specified and directed. |
| 11 | M&L for PCC 1:3:6 type C-1 using 20mm graded stoneaggregate as in hold fast andblock fillingof pressed steel chowkat including necessary form work if reqdetc complete all as specified and directed. |
| 12 | M&L for Providing precast ce- ment concrete type B1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 13 | M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate asin foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 14 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate asinSlabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed. |
| 15 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate asin chajja , shelves and like etc.complete all as specified and directed. |
| 16 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate asin beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 17 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate asin Columns,pillars,piers,posts and struts complete all as specified and directed. |
| 18 | Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent) |
| 19 | M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 20 | M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 21 | M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 22 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical to rough finished surface complete all as specified and directed. |
| 23 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished surface flat complete all as specified and directed. |
| 24 | M&L for formworkto chullah hoods, chajjas, troughs and similar items in cluding edgescomplete all as specified and directed. |
| 25 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 26 | M&L for formwork to sides of pillars, posts, struts, piers,columns and stanchions rough finished surfaces of concrete, square, rectangular or polygonal in shape complete all as specified and directed. |
| 27 | S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 28 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatm moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain/decorative colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing. etc complete all as specified and directed. |
| 29 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawingcomplete all as specified Make : Rajshree/Sintex/H2O solution.Note:-The door frame to be fixed to wall using 8 x 100 mm long anchor fasteners. |
| 30 | S&F 150mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 31 | S&F 100mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 32 | S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) andfixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd. |
| 33 | S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixedcomplete all as specified and as directed. |
| 34 | S&F 150mm size aluminium handle cast typecomplete all as specified and directed. |
| 35 | S&F tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed. |
| 36 | M&L for MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165and similar workcomplete all as specified and directed. |
| 37 | M&L for MS framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. |
| 38 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11mm to 15mm complete all as specified anddirected. |
| 39 | M&L forTMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 40 | M&L forTMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 41 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conformingFe-410W(GdeE-250) quality -B complete all as specified and directed. |
| 42 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-B. complete all as specified and directed. |
| 43 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 conforming to Fe 410 -W (Gde E- 250) quality A complete all as specified and directed. |
| 44 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. (each line wire to be measured) |
| 45 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 46 | S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete with glazing bars dovetailed or weldedcomplete all as specified and directed. |
| 47 | S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete without glazing bars dovetailed or weldedcomplete all as specified and directed. |
| 48 | M&L for 1.25mm thickpressed steel door frame of size 165mm x 60mm with one or more rebates including necessary , hinges, lock strike plate, fixing lugsetc complete as specified. |
| 49 | S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 50 | S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 51 | S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 52 | S&F 6mm thick plain non asbestos fiber cementbuilding boards, fixed or laid /inserted totimber /GI /Aluminium frame-work with screws complete all as specified and directed. |
| 53 | M&L for 75mm thick PCC 1:3:6 type C2(Using 40mm graded stone aggregate) as in plinth protectionfinishedeven and smoothusing extra cement.Joints to be given at every 3m interval and corners of buildings and fitted with bituminious mastic or equivalent filler complete all as specified and directed. |
| 54 | M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of hardstanding and ramp complete all as specified and directed. |
| 55 | M&L for 75mm thick PCCtype D2,1:3:6 using 40mm graded stone aggregateas in sub base floorcomplete all as specified and directed. |
| 56 | M&L for 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregates)as in flooring, finished the surface without using extra cement completeall as specified and directed. |
| 57 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6for laying floor finishescomplete all as specified and directed. |
| 58 | M&L for sheet glass, 3mm thick, plain ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each panecomplete all as specified and directed. |
| 59 | M&L for 4mm thick frosted Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panecomplete all as specified and directed. |
| 60 | M&Lfor preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 61 | M&L for two coats of synthetic enamel paint over one coat of red oxideon new steel surfaces of any description over 10cm in width or girthincluding preparation of surfaces complete all as specified and directed. |
| 62 | S&F steel water tubes medium grade galvanised with all fittings laid in trenchesbore of tube 20 mm complete all as specified and directed. |
| 63 | S&F steel water tubes medium grade galvanised with all fittings laid in trenchesboretube 50 mm complete all as specified and directed. |
| 64 | S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 65 | S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 66 | S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed. |
| 67 | S&F stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed. |
| 68 | S&F stop valve cast copper alloy screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 20mm dia complete all as specified and directed. |
| 69 | S&F Gun metal gate valve 20mm bore Cast Copper alloy, screwed down high pressure with Crutch or Butterfly handle screwed both ends for iron pipe complete all as specified and directed. |
| 70 | S&F Gun metal gate valve 50mm bore Cast Copper alloy, screwed down high pressure with Crutch or Butterfly handle screwed both ends for iron pipe complete all as specified and directed. |
| 71 | S&F Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20 mm bore complete all as specified and directed. |
| 72 | S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap, complete all as specified and directed. |
| 73 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 74 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screwsand wooden/plastic cleats (Minimum weight 90gms)complete all as specified and directed. |
| 75 | S&F PVC connectionspipe ,15mm dia size with PTMT nuts of length 450mm complete all as specified and directed. |
| 76 | S&F 100 mm dia Spun pipessoil, waste and vent pipes in any length with or without ears, with cement joints,fixed to wall complete all as specified and directed. |
| 77 | S&F cast iron bend (Spun) of any radius with oval access door including jointing with cement joints for (100 mm bore)complete all as specified and directed. |
| 78 | S&F 110mm PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed. |
| 79 | S&F 110mm PVC (SWR)pipes single socketed in any length with rubber ring joints laid in trenchcomplete all as specified and directed. |
| 80 | S&F 75mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 81 | S&F110mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 82 | S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 83 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 84 | S&F 110mm bore PVC (SWR) `P\"or \"S\" trape complete all as specified and directed. |
| 85 | S&F Salt-glazed stoneware gully traps, square or round mouthed, 150x150mm type \"P\" or \"S\" type etc complete all as specified and directed. |
| 86 | M&L for plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides ofbore pipes 150mm dia pipe after the pipe are laid and testedcomplete all as specified and directed. |
| 87 | M&L for SGSW pipes 150 mm dia grade \"A\" laid in trenches and jointed complete all as specified and directed. |
| 88 | M&L forCutting salt-glazed stoneware drain pipe 150mm diain position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 complete all as specified and directed. |
| 89 | S&F600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 90 | M&L for forming Contraction (Dummy) joints 70mm deep x 10mm wide,filled with sealing compound grade \"A\" complete all as specified and directed. |
| 91 | Demolition of cement concretein ground floorand paving n.exc 15 cm thickness( below or above ground level) complete all as specified and directed. |
| 92 | M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to matchon fair faces of brick work or concrete surface etc complete all as specified andand as directed |
| 93 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. |
| 94 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchetc complete all as specified and directed |
| 95 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchetc complete all as specified and directed. |
| 96 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size nconfirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 25mm thick sand filling layer well rammed and compacted complete all as specified and directed, |
| 97 | M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed |
| 98 | M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 99 | M&L forrendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed.Note:- WPC will be measured and paid separately under respective item of this schedule. |
| 100 | M&L for 15mm thick rendering on other than fair faces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 101 | M&L preparation of new plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed. |
| 102 | M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer over 1mm thick wall care putty complete all as specified and directed. |
| 103 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkai resistant primer complete all as specified and directed. |
| 104 | Cutting existing steel tubing bore of pipe 15mm for alterations or additions (Each cut measured), Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) done in position without taking down complete all as specified and directed. |
| 105 | S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed. |
| 106 | S&F 15 mm bore pillar taps fancy type (long neck) cast copper alloy with hot & cold mixturechromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and as directed. |
| 107 | S&F Toilet paper holderbrass chromium plated fixed with and including chromium plated brass screwswith wooden plugs complete all as specified and directed. |
| 108 | S&FVitreous china urinal, half stall type, white(excluding flushing cistern ,flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing only automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipecomplete all as specified and directed. |
| 109 | S&F white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium platedwaste fitting and PVC waste pipe 610 mm long andMS brackets complete all as specified and as directed. |
| 110 | S&F Vitreous china wash down water closet European type (Semi pedestal pattern) (excluding flushing cistern and flush pipe) including connection to outgoing pipe and seat cover and flushing pipe complete all as specified and directed. |
| 111 | S&FPVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all asspecifiedand as directed. |
| 112 | S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 113 | S&F in repair hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and as directed. |
| 114 | E/M ItemsM&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed. |
| 115 | M&L for sand cushioning for protection of underground cable, consolidatedand compacted with clean dry sand complete all as specified and directed. |
| 116 | M&L well burnt old size sub Class ‘B’ bricks, laid flat,in trenches for cable protection complete all as specified and as directed. |
| 117 | M&L for 40mm dia GI pipe Light grade with all necessary fittings laid in trenches, fixed to wall/pole/under road/floor etc for cable protection complete all as specified and as directed. |
| 118 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed for the followings: - |
| 119 | One light point/ Bell/ one fan point controlled by one switch |
| 120 | One 3 pin socket outlet, 6 Amp on the same board with other switches |
| 121 | One 3 pin socket outlet, 6 Amp independent |
| 122 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed. |
| 123 | S&F Switch piano, flush type single pole, one way 6 Ampcomplete all as per specified and directed. |
| 124 | S&F Socket outlet 2 in 1, 5 pin, 6 Ampcomplete all as per specified and directed. |
| 125 | S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universalcomplete all as per specified and directed. |
| 126 | S&F Switch socket combination 2 in 1, 6 Amp flush typecomplete all as per specified and directed. |
| 127 | S&F Sheet metal enclosure powder coated for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming complete all as specified and directed.Make:- Legrand/havells/L&T/ABB. |
| 128 | S&F Ceiling rose, 3 way PVC insulated body complete all as per specified and directed. |
| 129 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 130 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including cutting of wall complete all as specified and directed. |
| 131 | S&F MCB \"C\" series Single pole and neutral 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:Legrand/havells/L&T/ABB. |
| 132 | S&F MCB \"C\" series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. |
| 133 | Supply and fixing wall mounted fans complete230 V,50Hz, 400 mm sweep copper winding complete all as specified and directed. |
| 134 | Supply and fixingdecorative lamp holder insulated body suitable for & with LED lamp 5 Watt bulb fitting complete all as specified and directed. |
| 135 | S&F indoor luminare decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 18 W incl twin twisted copper conductor flexible wire from ceiling rose to connector complete all as specified and directed. |
| 136 | S&F indoor luminare decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 9W02 feet long incl twin twisted copper conductor flexible wire from ceiling rose to connector complete all as specified and directed. |
| 137 | S & F Building security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 40mm GI pipe bracket medium grade 1.2m long bent to shape including bolt, nut,washer,clamps pair made out of MS flat of size 25X3 mm , 4 Nos Anchor Bolt of suitable size etc complete all as specified and directed. |
| 138 | M&L for earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanised lead lead wire4.0 mm dia by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth strip protected by 40 mm medium grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion all as shown on electrical plate No.5 of SSR Part-I. including taking out unserviceable one and necessary earthwork complete all as specified and directed. |
