Military Engineer Services-MES has published Tender For Additional/ Alteration To Bldg No T-08 (Cook House) At Tibri Mil Stn Under Ge Gurdaspur.. Submission Date for this Tender is 21-10-2023. Building Work Tenders in gurdaspur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Sep-2023 | Corrigendum No 1 | Date | 11-10-2023 |
| 2 | 05-Oct-2023 | Corrigendum No 2 | Date | 14-10-2023 |
| 3 | 05-Oct-2023 | Corrigendum No 2 | BOQ | 14-10-2023 |
| 4 | 14-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-10-2023 |
| Sl. No. | Item Description |
| 1 | Roughening the surface of old concrete floor picking sweeping cleaning and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqm. |
| 2 | Material & labour Cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate as in roof padding finished even and smooth without using extra cement complete all as specified. |
| 3 | M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 kg /Sqm and applying evenly a tack coat of hot industrial bitumen 85/25 at the rate of 1.6 kg per Sqmcomplete all as specified and directed. |
| 4 | M&L for preparation of new or previously untreated surface of any description APP based polymeric membrane, etc., exceeding 10cm in width or girth and applying two coats of aluminium base paintcomplete all as specified and as directed. |
| 5 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 6 | M&L for 75mm mm thick PCC (1:3:6) Type C2 ( using 40mm graded broken stone aggregate ) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 part of sand (all by weight ) complete all as specified and as directed. |
| 7 | M&L Non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm to 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to matchincluding 15 mm thick screed bed in cm 1:6 including demolition of floor hearth or wall tilling including cement mortar bedding removing rubbish off premises complete all as specified and as directed. |
| 8 | M&L Non skid dark ceramic tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 including demolition of floor hearth or wall tilling including cement mortar bedding removing rubbish off premises complete all as specified and as directed. |
| 9 | M&L for ceramic glazed dark shade coloured tiles of size 350x 250x 7mm/ 450x350x7mm thick joint free on and incl 10mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/dadoincl demolition of floor hearth or wall tilling including cement mortar bedding removing rubbish off premises complete all as specified and as directed. |
| 10 | M&L machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick screed bed or bedding layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing incl demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified & directed. |
| 11 | M&L machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed 10mm thick in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab incl demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar complete all as specified & directed. |
| 12 | M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as spd. |
| 13 | M&L 15mm thick cement plastering in cm 1:6 on fair faces of brick or concrete surfaces, finished the surfaces even and smooth without using extra cement including taking down existing plasterincluding raking out joints, hacking for key, scrubbing down with water etc all as spd & directed. |
| 14 | All as per itemNo 13 above but 5mm thick on ceiling in CM 1:3 |
| 15 | M&L 15mm thick cement plastering on fair faces in cm 1:4 onother than fair faces of brick work, finished the surfaces even and fair including taking down of cement plaster, raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed |
| 16 | M&L for plastering in patches n.exc 3.0 Sqm in each patch including taking down of cement plaster, raking out joints, hacking for key, scrubbing down with water etc. on fair faces of brick walls /concrete surfaces etc and rendering 15mm thick cement plastering in cm 1:6 surfaces finished even and smooth without using extra cement complete all as specified & directed. |
| 17 | M&L for plastering in patches n.exc 3.0 Sqm in each patch including taking down of cement plaster, raking out joints, hacking for key, scrubbing down with water etc. on other than fair faces of brick walls /concrete surfaces etc and rendering 15mm thick cement plastering in cm 1:4, surfacesfinished even and fair complete all as specified & directed. |
| 18 | M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed. |
| 19 | M & L for preparation of newlyplastered surface of ceiling and applying two coats of white wash complete all as specified & directed. |
| 20 | M&L for applying two coats of oil bound distemper (Acrylic) overand including primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 21 | M&L for two coats ofOBD (Acrylic) on old decoratedwall surfaceincluding preparation of surfaces complete all as specified. |
| 22 | M& L for preparation of old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and as directed . |
| 23 | M& L for two coat of cement base paint over old surface including preparation of surfaces all as specified & directed. |
| 24 | M&L for preparation of new or previously untreated wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. |
| 25 | M&L for preparation of new or previously untreated steel surface exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. |
| 26 | Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter from the chowkats as spd |
| 27 | All as per Srl item No 26 above but exc 1.50sqm but n.exc 4.00 Sqm each |
| 28 | SSupply and fix for pressed steel framesof size 125 mm x 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate, including PCC (1:3:6), type C-0, ( using 12.5 mm graded stone aggregate) as in filling of frames including one shop coat of priming and two coats of synthetic enamel paint and preparation of surfaces completeall as specified and as directed. |
| 29 | Supply and fix for pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregate) as in filling of frames including one shop coat of priming and two coats of synthetic enamel paint and preparation of surfaces completeall as specified and as directed. |
| 30 | S&F MS Framed work as in chowkats, doors or gates of angle or other section with gusset plates, rails,braces, etc., and similar work incl primer conforming to Fe-290 Grade-E-165 complete all as specified and directed. |
| 31 | Demolition of cement concrete(unreinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 32 | S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colourPVC sheet to e fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. |
| 33 | S&F35mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed. |
| 34 | S&F flush shutters 35 mm thicksoild core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed. |
| 35 | S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged& glazed, shutter frame of ERW tube P section size50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including one shop coat of priming and two coats of synthetic enamel paint and taking down old existing window complete:- (i)Thickness of the sheet shall be of 18 gauge(ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii)Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv)MS Tower bolt 150mm long-02 Nos per leaf(v)Z section 20mmX25mm,100mm long stopper -01 Nos per leaf(vi)Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii)MS pintol hinges size 75mmx12mm- 2 Nos. per leaf(viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, shall be measured and paid for separately |
| 36 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated)comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including one shop coat of priming and two coats of synthetic enamel paint including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge.(ii)Glass/ wire mesh, shall be measured and paid for separately |
| 37 | S&F Aluminiumanodized barrel tower bolt of extruded section 150mm long |
| 38 | S&F aluminium alloy handle casttype anodized of size 150mm long |
| 39 | S&F aluminium alloy handle casttype anodized of size 100mm long |
| 40 | S&F butt hinges medium weight cold rolled mild steel 100mm size |
| 41 | S&F 150 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 42 | S&F 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate including fixing through welding/ bolts/ screws in metal/ wooden frame complete all as specified and directed. |
| 43 | S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete. |
| 44 | Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed. |
| 45 | S&F GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed |
| 46 | Taking up and down GI pipe 15mm bore including fittings, connection, as specified. |
| 47 | All as per Srl item No 46 above but 20mm bore of pipe |
| 48 | S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittingsISI marked all as spd |
| 49 | All as per Srl item No 48 above but fixing only (old serviceable pipe re-used including cleaning with new fittings) |
| 50 | S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittingsISI marked all as spd |
| 51 | All as per Srl item No 50 above but fixing only (old serviceable pipe reused including cleaning with new fittings) |
| 52 | S&F rotational moulded water storage tank of 1000 ltr capacity(cylinderical vertical with closed top) white, ISI marked, hoisted and fixed in position including dismantling of old unsv PVC water storage tank complete all as specified and as directed. |
| 53 | S&F in repair bib taps 15mm dia cast copper alloy, chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule all as specified and directed. |
| 54 | S&F in repair for 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed. |
| 55 | S&F in repairfor 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 56 | S&F in repair tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and as directed. |
| 57 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed . |
| 58 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified. |
| 59 | Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches, if required. |
| 60 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC `P’ or `S’ trap, integral foot rest including connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 using 40mm graded stone aggregate complete all as specified.Note:- Flush pipe and flushing cistern to be measured and paid separately. |
| 61 | S&F in repairs 08 to 10 litres capacityPVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle, 32mm dia PVC flush pipe and connections, jointsto pipes, making good the disturbed surfaces complete all as specified and as directed. |
| 62 | S&F in repair Flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level cistern. |
| 63 | M&L Green marble work (table rubbed and polished) 16mm to 18mm thick in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 and dismantling of existing stone slab/tiles of any description or thickness in floors, aprons etc laid in CM and screed complete all as specified and directed. |
| 64 | Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as directed. |
| 65 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in shelves and the like complete all as specified and directed. |
| 66 | Use and waste of form work to soffits of suspended slabs, floor slabs, landing and similar work; shelves including supports, overhangs, etc.and similar items including edges, rough finished surfaces of concrete complete all as specified and directed. |
| 67 | S&F in repair Vitreous china wash basin, white flat back, size 630x450mm excluding taps,waste,chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets, 32mm dia. brass CP waste coupling & waste pipe all as directed & specified. |
| 68 | S&F in repair Pillar taps, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 69 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm |
| 70 | S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms |
| 71 | S&F in repair PVC waste pipe 32mm dia 600 to 750mm long fixed to wash fitting of wash basin/ urinal all as specified and directed. |
| 72 | S&F 600mmx450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 73 | S&Fin repair PVC (SWR ) bends 110 mm bore any radius |
| 74 | S&Fin repair PVC (SWR ) bends 75 mm bore any radius |
| 75 | M&Lin repair PVC (SWR ) floor trap 100/75 mm plain with grating including jointing with solvent cement. |
| 76 | S&F Stack clamps for 100 mm pipe, made out of 20 mm by 1.5 mm galvanised flat iron and stays, including bolts and nuts and securing ends of stays to wall or roof. |
| 77 | All as per Srl item No 76 above but 75 mm bore complete all as specified and as directed. |
| 78 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed. |
| 79 | M&L for brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as spd. |
| 80 | Supply and fixing cutrain rod 20mm dia of anodised aluminium alloy with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed. |
| 81 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. n.exc 10 sq m on plan and n exc1.5 m in depth including taking out brick protection and getting out,all as specified & directed. |
| 82 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified & directed. |
| 83 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified & directed. |
| 84 | Demolition and breaking up old unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete)150 mm bore at any depth set in cement mortar including PCC bed complete all as specified & directed. |
| 85 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested;complete all as specified & directed. |
| 86 | Supplying, laying in trenches, jointing and testing Reinforced concrete pipes, class NP3, laid and jointed complete with collars at any depth on concrete bed complete all as specified. |
| 87 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone agg in fdn, filling and mass concretecomplete all as specified and directed. |
| 88 | M&L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, apex stone, bed plate, kneelers complete all as specified. |
| 89 | M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab for manholes and similar work etc complete all as specified. |
| 90 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 91 | M&L vitrified designer, heavy duty tile of size 400mm x 400mm, 12mm thick, coloured, outdoor, set, jointed and pointed in neat cement slurrywith white cement and pigment as in path/ floor, pattern of tile as approved by GE over and including 15mm thick screed bed in CM 1:6including demolition of existing trile and screed complete all as specified and directed. Make: Somany Durastone, Kajaria Duratech, Johnson Endura or equivalent of makes as per Appx "B" as approved by GE. |
| 92 | M&L for 60mm thick M-35 grade pre castMachine pressed concrete interlocking paver block any shape and size confirming to IS 15658-2006 with grey cement and no pigment over and including 75 mm PCC 1:4:8 type D2 (using 40mm graded stone aggregate) all as specified and as directed. |
| 93 | M&L for sand filling under floors or in foundation including watering and consolidation all as specified and as directed. |
| 94 | Taking down cement Plaster /deteriorated concrete from bottom of RCC chajjas /RCC facia /RCC beam/RCC slab/brickwork including racking out joints, hacking for key, scrubbing down with water (at a bldg height upto 4.50 m) and removing rubbish to a distance exceeding 50m but not exceeding 100m away and M&L for 15 mm thick plaster in CM 1:3 finished even and smooth without using extra cement on bottom of RCC chajja & RCC facia complete all as specified and directed by Engineer -in-Charge |
| 95 | M&L for Cement concrete Type B2 1:2:4 (40mm graded stone aggregate ) in surface channels and drains complete all as specified and as directed. |
| 96 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed. |
| 97 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/ loose soil complete all as specified and as directed. |
| 98 | M&L for cement concrete Type C2 1:3:6 (40mm graded stone aggregate) in post hole foundation complete all as specified and as directed. |
| 99 | S&F for roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing, column posts (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc usingFe 410 -W(GdeE- 250) qualityAcomplete all as specified and directed. |
| 100 | S&F in repairpre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as specified. |
| 101 | M&L 0.90mm thick decorative laminate type 1 of surface finish (Sunmica), colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instruction complete all as specified and directed. |
| 102 | M&L for 12 mm thick plywood grade BWR, Type BB as in cubboard shutter /shelf/ partition complete all as specified and as directed. |
| 103 | S&F in repair beads, straight ( any size ) of second class hard wood for glazed or gauzed joinery, renewed, including mitres etc complete all as specifed and as directed. |
| 104 | E/M PORTIONTaking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches, ceiling roses, pendents, regulator socket etc completeat site and making good disturbed surfaces of walls, floors etc. as per existing. |
| 105 | Point wiringwith PVC insulated and PVC sheathed single core multistrandedFRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings andmaking good to the disturbed surfaces with continuous earth wire of PVC insulated and PVC sheathed single core multistrandedFRLS copper conductor cable of size 1.5 Sqmm to commonearth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to and including CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light point/ Fan/ bell point controlled by one way switch |
| 106 | All as per Srl item No 105 above but one 5 pin socket outlet 5 amps on same board. |
| 107 | All as per Srl item No 105 above but 5 amps socket outlet on independent board. |
| 108 | All as per serial item No.105 here-in-before but with PVC insulated and PVC sheathed single core multistrandedFRLS copper conductor cable of size 2.5 Sqmm (nominal area), using approved colour coding, 1100 Volt grade ISI marked including PVC insulated and PVC sheathed single core multistrandedFRLS copper conductor cable of size 2.5 Sqmm (nominal area) 1100 Volt grade ISI marked as earth continuity conductor and connecting to the common earth dolly for 3 pin 15/16 Amps socket outlet on independent board. |
| 109 | M&L for sub main wiring with two single core multi stranded PVC insulated, unsheathed copper conductorof grade 1100 Volt , FRLS cableof size 6 sqmm (red for phase and black for neutral)and including electrical grade PVC conduitsof desired colour not less than 1.2 mm thick and 25 mm dia. & 6 sqmm FRLS multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth duly complete and taking down old unserviceable one. Note :- (a) Cost of making good the disturbed surface plastering/ filling putty and matching with the existing finishes is deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run. |
| 110 | S&F switch piano flush typesingle pole one way5 amps. |
| 111 | S&F socket outlet 3 pin 5 amps flush type. |
| 112 | S&F switch flush type 15 amps single pole type one way |
| 113 | S&F socket outlet 3 pin 15 amps flush type |
| 114 | S&F switch piano 2 way 5A all as specified and directed. |
| 115 | S&F in replacement surface mounting universal batten husing made of powder coated CRCA sheet suitabe for and upto 1 x 18/20W LED tube rodsingle sided and taking down old unserviceable housing complete all as specified and directed. |
| 116 | S&F in replacement LED tube light 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting into tube light batten fitting completeall asas specifiedand directed. Note :- The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporating the items in work. |
| 117 | Taking down carefully ceiling fan complete fittings at site removing fans, depositing to MES store yard and taking back to site for hanging only all as directed. . |
| 118 | Hanging only ceiling fanand connecting up including provision of cable from ceiling rose to connector of fan all as specified and directed. |
| 119 | S&F in replacement of fan regulator electronic type 5 step 100 watt, 240 volt and connecting complete all as specified and directed. |
| 120 | S&F Bell, AC, 230 Volts, single pole complete all as specified and directed. |
| 121 | S&F bell push flush type 6 Amp complete all as specified and directed. |
| 122 | S&F lamp holder, angle type PVC/ polycarbonate type with back plate, suitable for lamp holder base of and including 9 watt LED retrofit lamp complete all as specified and as directed. |
| 123 | M&L ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body |
| 124 | S&F GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 40mm x 5mm thick and drilling of hole for and including nuts, bolts and washers including painting MS clamps with two coats of synthetic enemal paint over a coat of red oxide primer including taking down the existing GI pipe bracket complete all as specified and directed. |
| 125 | S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact andcorrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 126 | Supply andfix in repair sheet metalenclosure forDB’s when MCB’s to beused, 240 volt 8 way SPN with bus bar and double door complete all asspecified anddirected.Note :- All the connection of incoming and out going wire in MCB will be made with thimble with suitable size as directed |
| 127 | S&F in repair MCBsinglepole 6amps to 32 amps, "C" series complete all asspecified anddirected. |
| 128 | S&F in repair MCB single pole and neutral 32 amps"C" series complete all as specified and directed. |
| 129 | Material and labour in replacement of distribution board made out of CRCA sheetDB vertical type double door TPN 4 Way MS sheetincluding fixing in the wall, cutting chases, grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing thefolowings:-(a)MCCB 4 Pole 63 Amps 16 KA breaking capacity with thermal release:01 No(In coming). (b)Bus bar made out of Aluminium duly insulated with wire adhesive tape RYB & black :4 Nos. (c) MCB SPN 40 Amp: 4 Nos, MCB SP 40 Amp: 04 Nos (Out going).(d)Connection from MCCB to bus bar will be made with Aluminium Strip of suitable capacity as directed. |
| 130 | M&L Earthing complete with galvanised steel earth plate electrode 60cm ×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision ofconcrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge. |
| 131 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core including taking down/ out unserviceable LT cables.Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately. |
| 132 | Supply and lay brick common burnt sub class "B" old size for protection of cable laid in trenches for under ground cable all as specified. |
| 133 | M&L sand cushioning in trenches using fine sand to under ground cable, laid in two layers before laying the cable & after laying the cable complete all as specified. |
| 134 | A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender.The Schedule of Credit is pre-priced by MES.The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
