|
| 1 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. |
| 3 | Easying and adjusting door and window shutters with chowkhats in old work complete as per specification and direction of E/l. |
| 4 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l. |
| 5 | Taking down chowkhat in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l. |
| 6 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 7 | Making holes in walls for fixing in cement concrete (1:2:4) tees of bed stone etc. Including the cost of fixing the materials and disposal of debris with all leads etc. All complete as per direction of E/I. |
| 8 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars & Sttiffiners etc. |
| 10 | Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 11 | Supplying fitting and fixing glass panes including supplying putty. Beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I. 4mm plain. |
| 12 | Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled \"Z\" and mullion steel sections and size as per IS-1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I. |
| 13 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Finishing wall premium Acrylic smooth exterior paint over new surface complete. |
| 16 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 17 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 18 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 19 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l. |
| 20 | Providing and laying Doublecharge vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622/ISO 13006 of approvedmake, in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.,complete. Size of Tile 600x600 mm. |
| 21 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 22 | Providing and fixing 18 mm thick gang saw cut mirror polsihed premoulded and prepolishe) machine cut for kitchen platforms, vanity counters, window sills to give high gloss finish etc. complete at all levels. |
| 23 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3)all complete as per building specification and direciton of E/l. |
| 24 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick |
| 25 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for ayment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 26 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. |
| 27 | Providing and fixing in position wall panelling at all heights with integraldensified calcium silicate panels/ tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). |
| 28 | Painter -class 1 |
| 29 | Labour |
| 30 | Carriage of Materials |
| 31 | [I] Sand lead 5 km (1k+4p) |
| 32 | [II] Stone chips lead 8 km (1k+7p) |
| 33 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms) with extra socket all compere as per specification and direction of E/I |
| 34 | providing and fixing brass stop cock- 15mm dia |
| 35 | Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. 25 mm dia |
| 36 | providing and fixing N.P./C.P brass /PVC procelain shower rose of 15mm inlet etc all complete as per specification and direction of E/I. Shower Rose - 125mm |
| 37 | providing and fixing 15mm size pillar cock C.I. Body brass spindle pillar cock of approved quality as per specification and direction of E/I |
| 38 | Making holes in walls for laying G.I. / C.P.V.C pipe and restoring the same after pipe laying as per specification and direction of E/I. |
| 39 | 125 mm thick wall |
| 40 | 250 mm thick wall |
| 41 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. |
| 42 | Glass self |
| 43 | Mirror (600 x 450mm) |
| 44 | C.P. Brass tower rail |
| 45 | C.P. brass dish container medium quality with screw and hinges etc. |
| 46 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S brackets 32m C.I brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grms 32mm PVC waste pipe 750mm long with barss coupling at one end and making plu,ber joints ets. all complete as per specification and dirction of E/I. |
| 47 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal Work- Exposed on Wall |
| 50 | 20mm nominal outer dia pipes |
| 51 | 25 mm nominal outer dia Pipes |
| 52 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. |
| 53 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 54 | Wiring for light/point/fan point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/ recessed PVC conduit as required with paiano type switch phenolic laminated sheet M.S Box earthing the point PVC insulated copper with 1.5sq,.mm with taxes all complete as per approved design drawing, building & electrical specification and direction of E/I. Group B |
| 55 | Wiring for light/power piug wiring with 2x4sq.mm F.RPVC insulated copper conductor single core cable in surface/ recessed P.V.C conduit along with 1 No. 4sq.mm FR PVC insulated copper wire for loop earhing etc. as required with taxes, all complete as per approved design, drawing, building & Electrical specification and direction of E/I. |
| 56 | Supplying and fixing following piano type switch/socket on the existing modular plate and switch boxincluding connections but excluding modular plate etc. as required |
| 57 | 5/6 amps one way switch |
| 58 | 3pin 5/6 amps, socket outlet |
| 59 | Wiring for sub-main wiring with following size of PVC insulated, copper conductor, single core cable in surface/recessedPVC conduit etc. as required with taxes, all complete as per approved design, drawing, building & Electrical specification and direction of E/I. |
| 60 | 2x2.5 sq.mm + 2.5sqmm earth wire |
| 61 | 2x6 sq.mm +1x6sqmm earth wire |
| 62 | Supplying and Fixing Piano type Switch/ Socket on existing Switch Box/ Cover including connection etc. as requared. Electronic step fan regulator, mini |
| 63 | S/F metal box of 180x100x60m deep on surface/recessed with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 and 15/16 Amp socket outlet and 15/16 Amp piano type switch connection etc as reqd. |
| 64 | supplying and fixing 2 pin 5amp.ceiling rose on the existing junction box wooden block including conection etc. as required. |
| 65 | Supplying and fixing batten holder / angle holder including connection etc.as required. |
| 66 | S/F/F48\" (1200 mm) ceiling fan of approved mark Usha, Haveils, Orient, Bajaj Etc. as per required |
| 67 | ITC ceiling fan Installation, testing and commissioning of resistance type ceilling fan regulator in existing switch box including conection with 1.5 sq.mm FRPVC insulated copper conductor, single core cable earthing the requlator etc. as required. |
| 68 | Supplying and fixing of following way single pole & neutral, sheet steel, MCB distribution board consumer unit, 240 volts, on surface/recess, complete with tinned copper bushbars, neutral busbar, earth bar, din bar, hinged front Acrylic cover for the MCB knobs detachable gland plate, interconnection, phosphatized and power painted including earthing etc. as required with taxes, all complete as per approved design, drawing, building & electrical specification and direction of E/I. ( with set RCCB/Isoator)- 6 Way.Single door |
| 69 | Supplying and fixing 5amps to 32 amps, rating, 240 volts,\"L\" series miniature circuite breaker of following poles in the existing MCB DB complete with connection, testing the commissioning etc. as required with taxes, all complete as per approved design, drawing, building & electrical specification and direction of E/I. - 6/32 amps single pole,\"B\" series |
| 70 | Supplying and fixingfollowing rating double pole,240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc, as required.-40 amps |
| 71 | Supplying and fixing followingcapacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metal board with rewirecable type fuses, including drilling holes in metal board, making connections, etc as required.- 32 amps, double pole |
| 72 | Bulb Head Fitting 9/10 Watt CFL/LED. |
| 73 | 1x28 Watt TS Tubelight Fitting. |
| 74 | Earthing with G.I earth pipe 4.5mtr long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc as reqired with taxesall complete as per approved desin, drawing building & electrical specification and direction of E/I. |
| 75 | S/F 8SWG copper wire at 0.50 meter below ground level for conductor earth electrode including soldering etc as reqd. |
| 76 | S/F/F 15/16 watt LED Bulb (20/22W) Bajaj, Bentec, Heivels as per required |
| 77 | LED STREET LIGHT (30W) |
| 78 | Add 18 % GST (in Basic Rate must fill 12) |
| 79 | Add 1% Labour Cess (in Basic Rate must fill 1) |
