|
| 1 | Dismantlingstone slab flooring laid n cement mortar including stackingof serviceable materials and disposal of unserviceable materials with all leads all complete job as per direction of E/I. |
| 2 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Dismantling steel work in built up sections in angles,tees,flats and channels including all gusset plates,bolts,nuts,cutting rivets,welding etc including dismenmbering and stacking within 50 metres lead including all complete job. |
| 5 | Taking down C.A. Of G.C.I. Sheet in roofs with ridges including stacking the serviceable materials within 15M. Lead and disposal of unserviceable materials with all leads as per direction of E/I. |
| 6 | Taking down singly layer naria tiles, carefully stacking properly on ground within 15M. Lead and disposal of debries with all leads complete as per direction of E/I. |
| 7 | Taking down wooden beams, rafters, building frames etc. Of any type of roofing including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 8 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 9 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil itemA) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 10 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 11 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6(1Cement:3coarsesand(zone-III):6gradedstoneaggregate40mm nominal size) |
| 13 | Providing designation 75B brick work inC.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 14 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mmnominal size). |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 18 | providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 19 | (8mm dia )(TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 20 | (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 21 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 22 | Dismantling aluminium/Gypsum partitons,doors,windos,fixed glazing and false ceiling including disposal of unserviceable surplus materials and stacking of serviceable materials within in 50 meters lead as directed by E/I. |
| 23 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at230 mm c/c, including jointing and finishing to a flush finish of tapered andsquare edges of the board with recommended jointing compound , jointingapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum moisture resistant board |
| 24 | Providing and fixing powder coated aluminium work (minimum thicknessof powder coating 50 micron) consisting of tee/ angle sections, of approvedmake conforming to IS : 733 in frames of false ceiling including aluminiumangle cleats with necessary C.P. brass/ stainless steel sunk screws,aluminium perimeter angles fixed to wall with stainless steel rawl plugs@ 450 mm centre to centre and fixing the frame work to G.I. level adjustinghangers 6 mm dia. with necessary cadmium plated machine screws allcomplete as per approved architectural drawings and direction of theEngineer-incharge (level adjusting hangers, ceiling cleats and expansionhold fasteners to be paid for separately). |
| 25 | Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facials and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing moulding and polishing to edgesto give high gloss finish etc. complete at all levelsGranite Stone slab allcolour and texture except black,cherry/Ruby red ,area of slab upto 0.50sqmm. |
| 26 | Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut forplatforms, vanity counters windows sills, facials etc of required size shade colour, texture over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing moulding and polishing to edgesto give high gloss finish etc. complete at all levels. Granite Stone slab allcolour and texture except black,cherry/Ruby red ,area of slab over 0.50sqmm |
| 27 | Providing edge moulding to18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work |
| 28 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm havingwith water absorption less than 0.5% and conforming to IS: 15622 of approvedmake in all colours and shades in for outdoor floors such as footpath, courtyard, multi modals location etc., laid on 20mm thick base of cement mortar1:4 (1cement : 4 coarse sand) in all shapes & patterns including groutingthe joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 of (Thickness to be specifed by the manufacturer) of approved make inall colours shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of c ement mortar 1:3(1cement:3COARSE SAND) AND JOINTING WITH GREY CEMENT SLURRY @ 3.3KG PER SQM INCLUDING POINTING IN WHITE KCEMENT MIXED WITH PIGMENT OF MATCHING KSHADE COMPLETE.job as per direction of E/I |
| 30 | Providing and laying 3mm thickAPP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 -160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete .The vital physical and chemical parameters of the membrane shall be asunder : Joint strength in longitudinal and transverse direction at 23°C as350/300 N/5 cm. Tear strength in longitudinal and transverse direction as60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane |
| 31 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. |
| 32 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 33 | Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l |
| 34 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in roof members as pillers, plates, rafters, purlines. beams and type of beam with cost of nuts and bolts complete with cleats (with wooden check) fitting with screws all complete as per building specification and direction of E/I. |
| 35 | Supplying, fitting and fixing 30mm thick solid core type non-decorative single leaf 1/3rd glazed flush shutter in door and windowswith black board core blended with high qualityphenol formal dehydes synthetic resine both side commercial veneered of standard make with top glazed of size 95X20 CM . or as specified fitted with 3mm thick glass panes of standered make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 36 | Providingand fixing in wall lining flat pressedthree layer (medium density) particle board or graded wood prre laminattedone side decorative klamination and otherside balancing lamination Grade I type II ,IS 12823 marke4d including priming coat on unexposed arrangment and screws etc complete job. |
| 37 | Providing and fixing 4mm thick coir veneer board,ISI marked IS:14842,plain lining with necessary screws,priming coat on unexposed surface etc all complete job. |
| 38 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare thesurface even and smooth complete. E/I. |
| 39 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 40 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) |
| 41 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 42 | Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes |
| 43 | Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/ m² |
| 44 | Providing ridges or hips of width 60cm overall width plain G.S.sheet kfixed with polymer coated J or L hooks,bolts land nuts 8mm dia G.I.limpet and bitumen washers complete.0.80mm thick with sinc coating not less than 275gm/M2 |
| 45 | Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt) |
| 46 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 47 | Providing two coat of coaltarring over wooden surface including preparing the surface after cleaning, removing dirt scales greaseincluding scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 48 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 49 | Providing and Fixing factory made uPVC white coloursliding glzed windowThree track three panels sliding window made of (big series) frame 92x44mm &sash 32x60mm both having wall thickness of 1.9±0.2mmand single galzed bead /double glazing bead of appropriate dimension(Area of window above 1.75sqmm upto 2.50sqm)weather proof siliconsealelnt over backer rod of required size and of approved quality,all completeas per approved drawing & direction of E/I.(single/double galss panes,wire mesh and silicon sealant shall be lpaid separately) Note_For UPVC frame and sash extruded profiles minus 5% tolerance indimension i.e.indepth & width of profile shall be acceptable.Three track three panels sliding windows with fly proof S.S.wire mesh( two nos,glazed & one no wire mesh panels ) made of (big series) frame 116x45mm& sash 46x62mm both having wall thickness of2.3±0.2mm and single glazing bead/double glazing bead of appropriate dimension.(area of window above 1.75sqm) |
| 50 | Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm) |
| 51 | Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts completeGalvansied M.S.wire gauze with 0.63 mm dia wireand 1.4 mm aperture on both sides including all complete job.as per direction of E/I. |
| 52 | Along the external wall below concrete or masonry apron using chemical emulsion @2.25litres per linear meter including drilling and plugging holes etc. Chlorpyriphos E.C.20% with 1% concentration. |
| 53 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole,300mmapartincluding drilling 12mm diameter holes and plugging with cement mortar 1:2(1cement:2 coarse sand) to match the existing floor. With chloroyriphos/Lindane E.C.20% with 1% concentration. |
| 54 | Treatment of existing masonry using chemical emulsion @one litre per hole at 300mm interval including drilling holes at 45 degree and Plugging them with cement mortar 1:2(1cement 2 coarse sand)to the full depth of the hole. Chlorpyriphos E.C.20% with 1% concentration. |
| 55 | Treatment at points of contact of wood work by chemical emulsion chlorpyriphos (in oil or kerosence based solution @ 0.5 litres per hole by drilling 6 mm dia holes at downward angles of 45 degree at 150mm centre to centre and sealing the same. |
| 56 | Supplying chemical emulsion in sealedcontainers including delivery as specified. chlorpyriphos emulsifiable concentrate of 20% |
| 57 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below.1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos2-Applying two coats of sealer with spray gun and allowingsufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polishis applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time) |
| 58 | Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I. |
| 59 | sand lead 8K.M. |
| 60 | chips lead 22K.M. |
| 61 | Stone Metal 20 km lead |
| 62 | Brick lead 8K.M(1K+7P) |
| 63 | Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)@ 3.3kg/sqm including pointing the joints withwhite cement and matching pigments etc.,The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified tiles Matt/Antiskid finishincluding all complete.(size 1200x1800mm) |
| 64 | Providing fitting and fixing royal pattern PVC printed wall paper as per building specification and direction of E/I. |
| 65 | Providing fitting and fixing ACE embossed texture and single suded Uv protection and multi wall and supply,both side U&v protection and specifical treatment and translucent kand opaque on request and double wall and polycarbonate sheet as per building specification and instruction of E/I. |
| 66 | Add 18 % GST (in Basic Rate must fill 12) |
| 67 | Add 1% Labour Cess (in Basic Rate must fill 1) |
