Tender For Providing And Fixing Steel Shed On Store Wings Near Ascd Lab, roorkee-Uttarakhand

Providing And Fixing Steel Shed On Store Wings Near Ascd Lab Civil Items Works; 1 Earth Work In Excavation By Mechanical / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 Min Widthor 10 Sqm. Onplan ) Includingdressing Sides And Ramming Of Bottoms, Lift Up To 1.5Includinggettingoutthe Excavated Soil As Directed.All Kinds Of Soils 2 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth Side Of Foundation Etc. In Layer Not Exceeding 20Cm. In Depth , Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Up To 1, 5M. 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 4 Providing Unskilled Manpower For Shifting Of Various Old Testing Models And Materials From Construction Site To Specified Space In The Institute As Per Direction Of Engineer-In-Charge 5 Providing Skilled Manpower For Shifting Of Various Items, Furneture, Old Testing Models And Materials From Construction Site To Specified Space In The Institute As Per Direction Of Engineer-In-Charge 6 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes. 7 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :Two Or More Coats On New Work 8 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.

INR 590 /-

INR 3800.0 /-

Refer document