|
| 1 | PART A NON BSR |
| 2 | SITC of5 MP Fixed Bullet Network Camera Image Sensor 1/2.7\" Progressive Scan CMOS,Min. Illumination Color: 0.003 Lux @ (F1.4, AGC ON), 0 Lux with IR on,Shutter Speed 1/3 s to 1/100,000 s,Wide Dynamic Range 120 dB,Day & Night IR cut filter,Lens Type Fixed focal lens, 2.8, 4, 6,IR Range Up to 90 m,Max. Resolution 2592 × 1944@25fps,Quad Stream ,Video CompressionH.265/H.264/H.264+/H.265+,Video Bit Rate 32 Kbps to 8 Mbps,Region Of Interest (ROI) 5 fixed regions for main stream and sub-stream,Simultaneous Live View Up to 6 channels,API Open Network Video Interface (PROFILE S, PROFILE G, PROFILE T), Protocols,TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, ARP, SNMP,Security Password protection, complicated password, HTTPS encryption,MicroSD/SDHC/SDXC card (256 GB) local storage, and NAS (NFS, SMB/CIFS), BLC, HLC, 3D DNR,Alarm 2 inputs, 2 outputs,Audio 1 input & 1 output , Face Capture,Unattended baggage detection, object removal detection, scene change detection, audio exception detection, Open Network Video Interface (PROFILE S, PROFILE G, PROFILE T) Power Supply 12 VDC ± 25%, PoE: 802.3at, Startup And Operating Conditions -30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing) Protection IP67 , Certifications :- CE,FCC,UL,BIS |
| 3 | SITC of 2 MP 32X Powered by DarkFighter IR Network PTZ Speed Dome Image Sensor 1/2.8\" progressive scan CMOS Min. Illumination Color: 0.005 Lux @(F1.6, AGC ON),B/W: 0.001Lux @(F1.6, AGC ON),0 Lux with IR ,Shutter Time 1/1 s to 1/30,000 s,Day & Night IR Cut Filter,32× optical zoom,Digital Zoom16× ,Focal Length 4.8 mm to 153 mm,24 programmable privacy masks,120 dB WDR,IR Range 150 m ,Movement Range (Pan) 360° endless,Pan Speed Configurable, from 0.1°/s to 160°/s, ,Preset speed: 240°/s ,Movement Range (Tilt) From -15° to 90° (auto-flip) Tilt Speed Configurable, from 0.1°/s to 120°/s,Preset Speed: 200°/s ,Presets 300 ,Power-Off Memory Support,3D Positioning,Face Detection, Intrusion Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, Object Removal Detection, Unattended Baggage Detection, Audio Exception Detection,Smart Tracking,ANR (Automatic Network Replenishment),HLC/BLC/3D DNR/Defog/EIS/Regional Exposure/Regional Focus,Built-in memory card slot, support Micro SD/SDHC/SDXC, up to 256 GB; NAS (NPS, SMB/ CIPS), Video Compression H.265+/H.265/H.264+/H.264, Alarm Output 1-ch alarm output,Alarm Input 2-ch alarm input Audio Input,1-ch audio input ,Audio Output 1-ch audio output, Network Interface 1 RJ45 10 M/100 M Ethernet, Power 24 VAC and Hi-PoE,Protection Level IP66, IK10,Working Humidity = 90%,Working Temperature -30°C to 65°C (-22°F to 149°F) Certificate CE,FCC,UL,BIS |
| 4 | SITC of NVR 32 channel , Two-way audio input: 1-ch, RCA (2.0 Vp-p, 1kO),Incoming bandwidt:200mbps,Outgoing bandwidth 200 Mbps, 8 sata, resolution 1920 × 1080/60Hz Decoding format-H.264/MPEG4, Capability 2-ch @ 4K, or 8-ch @ 1080p, Power Consumption = 80 W (Make-WD/SEAGATE),Working Temperature -10 ºC ~ +55 ºC (+14 ºF~ + 131 ºF), |
| 5 | SITC of LED Monitorfull HD complying to with following specifications:Resolution : Full HD : 1920 x 1080 or better Backlight : CFL/LED Brightness : 400 NITS min. Contrast : 1200 : 1 or betterPower supply : 230v + / - 10%, 50 Hzinstallationat sitewith connections andalong with all accessoriesof 55 INCHESsizesetc.comp as required |
| 6 | SITC of 3 KVA Online UPS With Internal Battery 12v battaery for min 15 min back up incl. stand etc. Make: BPE/Microtek/Luminious/IPS |
| 7 | Charges ofmaking Jhiri in the wall required for fixing conduit20mm/25 mm, including covering conduit and making good finish the same as before.The repairing of Jhiri &covering of conduit should be done by lime sand plaster & then applying lime kara as per traditional pratice. |
| 8 | Removing & refixing the existing floor stone for laying the cable/wire/conuit and making good the same i/c replacement of broken stone complete etc. as required. |
| 9 | P & F of HDMI cable 1.4 version Make :-Allen, Terabute, Kramer |
| 10 | SITC of 10Tb Surveillance grade HDD Formatted capacity (512 bytes/sector)** 10,000 GB (10TB),SATA interface transfer rate 600 MB/s,Maximum data transfer rate 185 MB/s,Cache buffer 256MB,Voltage tolerance (including noise) 5V ±5% 12V ±10%,Non-Operating (Ambient °C) –40° to 70°,Relative humidity 5% to 90% (operating) 5% to 95% (non-operating) Approved Make :- Seagate/WD |
| 11 | P&F of Point to Point Wireless Radio Link router (PAIR), Superior net throughput – 270-300 Mbps,Best latency – < 3 ms,Configurable channel bandwidth - 3.5-50Mhz, Dynamic Frequency Selection (DFS), AIS (Automatic Interference Sensibility) technology, PPS upto Up to 400,000 Packets Per Second, Power over Ethernet (PoE) - 48 VDC, IP67 operating temprature -5 degree to 55 degree, connector 2x RJ-45, Real time & history - logs and counters of traf c and radio data, 24dBi (integrated). should complete in all respect for mounting, clamp, structure etc. if required. |
| 12 | PART BBSR |
| 13 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 14 | 25 mm |
| 15 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 16 | Supply, Drawing and Testing, of stranded Multimode (50/125 µm) glass optic fiber cable, as per latest ammendments of TIA/EIA 568/ISO/IEC 11801:2011/ IEC 60794-1-2 E1, E3,E11, F1/ EN 50173-1/ EN 187 000/ IEC 60974-2, 2-20, 2-21/ ITU G.652D, construction of LSZH outer sheath cable, cable should be used for LAN and WAN back bones, . With its LSZH sheathing these cables should be ideal for indoor/outdoorinstallations in existing MS/PVC /HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 17 | 6 fiber |
| 18 | Supply, installation, Testing and Commissioning of 1000 base-LX/LH single mode/Multi modefibre to 1000 base-T copper giga bit ,Media Convertorcomplete as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 19 | Fiber Fusion Splicing with OTDR Testing of Fiber Single/ Multi mode (per splice) of glass Fiber Optic Cable including cleaning the cable and making splice as per standard practice complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 20 | Supply, Installation, & Testing of 19\" 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, Singlemode glass Fiber Optic Cable Patch panel/LIU loaded with flangless/screwable duplex adapters for ST/E-2000/SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirment complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 21 | 6 Ports |
| 22 | Supply, Installation, & Testing of Indoor duplex Singlemode patch cord (9/125 µm (OS1/OS2) made of glass fiber optic with LSZH jacket, F8 2.0x4.1 mm, yellow, singlemode G652.D (9/125 µm (OS1, OS2) Mounted on both sides with ST/E-2000/SC/LC/MT-RJ/PC type Duplex connectors in acc. with IEC 61754-20. Zirconia (ceramic) ferrule with a PC polished endface geometry, connectors should be tuned in accordance with IEC 61755-3-1 and qualified in acc. with IEC 61753-1 for category U (uncontrolled environment, duplex clip and white plastic dust cover, should comply to delta IL < 0.2 dB after 500 mating cycles, there should be an optional Visual coding, mechanical coding and lock protection on the patch cords which can be added on later stage. patch cords\"s performance should be acc. to IEC 61753-1 (Table A.12) as per latest ammendments of TIA/EIA 569B.3, as per requirements.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 23 | Single Mode Patch Cord 1 Mtr. |
| 24 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArmouredCoppercable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withelectrolytic gradeCopper made of copper rodsconfirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie)includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 25 | 1.5 Sq. mm |
| 26 | 3 core |
| 27 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 28 | S&F following sizesof ISI marked ( IS:14927 P - II ) virgin materialUPVC trunking along with accessorieslike coupler, inner, outer, elbow, square box, tee, end cap etc. on surfacewithscrews, expansionfastenersas required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 29 | 25 mm x 12 mm |
| 30 | Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as requiredcomplete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 31 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level |
| 32 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 33 | Supply & Installation of IP-20 & IK-08 , UL ListedWall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with \"U\"Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastneretc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 34 | 6 U Rack with Width 600 mm &Depth 400 mm + 100 mm |
| 35 | 9 U Rackwith Width 600 mm & Depth 400 mm + 100 mm |
| 36 | Supply , Installation, Testing and Comissioning ofManaged Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
