|
| 1 | ITEM NO. : 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means....(INo21-02 , PgNo 153) ( STATE DSR ) Item Spec: (Bd.A.1 Page No. 259) & () |
| 2 | ITEM NO. : 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. Complete. (Lift upto 1.50 m) By Manual Means....(INo21-05 , PgNo 153) ( STATE DSR ) Item Spec: (Bd.A.2 Page No. 259) & () |
| 3 | ITEM NO. : 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed )....(INo24-01 NS, PgNo 175) ( STATE DSR ) Item Spec: (Bd. E. 1 Page No. 287) & (RA NO. : 1) |
| 4 | ITEM NO. : 4 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-11 NS, PgNo 178) ( STATE DSR ) Item Spec: (Bd.F.3 Page No. 298 and B.7, Page No.38) & (RA NO. : 2) |
| 5 | ITEM NO. : 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-31 NS, PgNo 179) ( STATE DSR ) Item Spec: (Bd.F.5 Page No. 300 and B.7, Page.No. 38) & (RA NO. : 3) |
| 6 | ITEM NO. : 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-50 NS, PgNo 181) ( STATE DSR ) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) & (RA NO. : 4) |
| 7 | ITEM NO. : 7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-70 NS, PgNo 182) ( STATE DSR ) Item Spec: (Bd.F.8 Page No. 302 and B.7, Page No.38) & (RA NO. : 5) |
| 8 | ITEM NO. : 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)....(INo26-05 NS, PgNo 184) ( STATE DSR ) Item Spec: (Bd.F.9 Page No. 303 and B.7, Page No.38) & (RA NO. : 6) |
| 9 | ITEM NO. : 9 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....(INo26-33, PgNo 188) ( STATE DSR ) Item Spec: (Bd.F.17, Page No. 306) & (RA NO. : 7) |
| 10 | ITEM NO. : 10 Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.....(INo21-36 , PgNo 157) ( STATE DSR ) Item Spec: (Bd.A.10 Page No. 262) & () |
| 11 | ITEM NO. : 11 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.....(INo21-37, PgNo 157) ( STATE DSR ) Item Spec: (Bd.A.11 Page No. 263) & (RA NO. : 8) |
| 12 | ITEM NO. : 12 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.....(INo21-38, PgNo 157) ( STATE DSR ) Item Spec: (Bd.A. 12 Page No. 264) & (RA NO. : 9) |
| 13 | ITEM NO. : 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.....(INo27-01, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G. 1 Page No. 313) & (RA NO. : 10) |
| 14 | ITEM NO. : 14 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G.5 Page No. 315) & (RA NO. : 11) |
| 15 | ITEM NO. : 15 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.....(INo32-01, PgNo 209) ( STATE DSR ) Item Spec: (Bd.L.1 Page No. 367) & (RA NO. : 12) |
| 16 | ITEM NO. : 16 Providing internal cement plaster 20mm thick in single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curingetc.complete.....(INo32-07, PgNo 209) ( STATE DSR ) Item Spec: (Bd.L.4 Page No. 368) & (RA NO. : 13) |
| 17 | ITEM NO. : 17 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.....(INo32-15 , PgNo 210) ( STATE DSR ) Item Spec: (Bd. L.10, Page No.370) & () |
| 18 | ITEM NO. : 18 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.....(INo32-11, PgNo 209) ( STATE DSR ) Item Spec: (Bd.L.7 Page No. 369) & (RA NO. : 14) |
| 19 | ITEM NO. : 19 Providing and laying chequered tiles of approved qualityof size 30 cm x 30 cm for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete.....(INo33-66, PgNo 220) ( STATE DSR ) Item Spec: (Bd. M-12 page No. 385) & (RA NO. : 15) |
| 20 | ITEM NO. : 20 Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.....(INo33-05, PgNo 213) ( STATE DSR ) Item Spec: (Bd.M.3 Page No. 380) & (RA NO. : 16) |
| 21 | ITEM NO. : 21 Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.....(INo39-49 , PgNo 256) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 22 | ITEM NO. : 22 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.....(INo39-09 , PgNo 246) ( STATE DSR ) Item Spec: (Bd-T-34, Page No. 499) & () |
| 23 | ITEM NO. : 23 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete.....(INo33-48 , PgNo 218) ( STATE DSR ) Item Spec: (Bd. M. 12) & () |
| 24 | ITEM NO. : 24 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box....(INo39-40 , PgNo 252) ( STATE DSR ) Item Spec: (As directed by engineer-in-charge.) & () |
| 25 | ITEM NO. : 25 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.....(INo40-02 , PgNo 264) ( STATE DSR ) Item Spec: (Bd.U.1 Page No. 537) & () |
| 26 | ITEM NO. : 26 Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete....(INo40-06 , PgNo 264) ( STATE DSR ) Item Spec: (As directed by Engineer Incharge) & () |
| 27 | ITEM NO. : 27 Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.....(INo36-11 , PgNo 227) ( STATE DSR ) Item Spec: (Bd.P.5 Page No. 413) & () |
| 28 | ITEM NO. : 28 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.....(INo35-23 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 29 | ITEM NO. : 29 Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.....(INo35-25 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 30 | ITEM NO. : 30 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)....(INo42-87 , PgNo 283) ( STATE DSR ) Item Spec: (As directed by Engineer Incharge) & () |
| 31 | ITEM NO. : 31 Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge....(INo6-36 , PgNo 60) ( STATE DSR ) Item Spec: (MORTH 801) & () |
| 32 | ITEM NO. : 32 Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.....(INo31-10 , PgNo 206) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 33 | ITEM NO. : 1 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).....(INo19-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification ) & () |
| 34 | ITEM NO. : 2 MORTOR Compressive Strength.( Set of 3 Cubes)....(INo27-VQC , PgNo 585) ( STATE DSR ) Item Spec: (As per Standard Specification ) & () |
| 35 | ITEM NO. : 3 BRICKS Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).....(INo13-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification ) & () |
| 36 | ITEM NO. : 1 Royalty Charges for RUBBLE. Rate = Royalty + surcharge (2%) (211.95 + 4.23 = 216.18 Per Cum)....(INo1-J , PgNo 1) ( STATE DSR ) Item Spec: (As Directed By Engineer Incharge) & () |
