|
| 1 | Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton soil, hard red, earth mixed with 50% fair sized boulders and hard gravelly soil and depositing on bank with initialed and lift as per SS 20A inclusive of shoring strutting waling and bailing out water where ever necessary forming protective bunds, coffer dams and including refilling charges around and all other incidental charges etc., complete complying with standard specification for foundation SS. No. 23 SSRB. |
| 2 | Supplying and filling in basement with clean dry river sand including cost and conveyance of sand to work site from approved sources and including labor charges for all lead, sand lift, filling, laying, leveling, watering and compacting including all labor charges etc., complete complying with standard specifications. |
| 3 | Cement Concrete 1:4:8 mix using 40 mm ISSHBG Jelly including cost & conveyance of all material to site and all laborsetc complete. |
| 4 | Brick work in Cement Motor 1:5 using country bricks of size 8 3/4x 41/4x 21/4 including cost and conveyance of all materials to site from approved sources including cost of cement which will be supplied by the contractor own cost of stipulated under special condition, including the conveyance of cement from the departmental saction stores to work site and bandlingcharges for the same at both ends including labour charges for mixing cement mortor including safolding charges extra labour for working in heightsand watering and curing with all leads for good soft potable water and including all other incidental charges etc.complete complying with standard specifications. |
| 5 | Centering for sides and soffiots including necessary supports and strutting as directed by the departmetal officers.Rate for 10m2for the following items (RCC floor slab, Rectangular/ Square, Tee/ Ell beams. Lintels. |
| 6 | plainsurface and roof |
| 7 | Column |
| 8 | Supply and fabrication of steel including cost and conveyance of steel and labour charges for cutting, bending, grilling, tying and fixing in position as per standard specification. |
| 9 | Reinforcement CC 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and favricative charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roofs |
| 10 | Below Basement |
| 11 | Ground floor (Basement+ Ground Floor) |
| 12 | Ceiling Plastering with cement mortor 1:3 mix to 10mm thick for RCC .Items including cost and conveyance of all materials to site and all labour charges etc completed |
| 13 | Plastering with C.M 1:5 12mm thick including cost and conveyance of all materials to site and all labour charges etc., complete. |
| 14 | Manufacturing, supplying and fixing of Steel doors with following specification.MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame.Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18 G CR Sheets of best quality is laid as panel in the shutter frames.18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwitching the CR Sheet for rigidity.Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter.300mm length of hinges 2 Nos, for shtter is provided.6 Nos.of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided.250x16mm size of Two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear sideof the door at an appropriate place and 1 No. of M.S. handle of heavy duty. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing.All members are given one coat of red oxide primer as directed by the departmental officers.The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete. (Single Leaf) |
| 15 | Painting the new iron works, in all floors,two coats of best synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works) over one coat of primer including scrapping and preparation of surface, cost of brushes, high scaffolding charges, neat finishing, complying with standard specification and as directed by the departmental officers |
| 16 | Manufacturing, Supplying and fixing in position of Steel windows with the following specifications.Outer frames of windows made of \"Z\" section F7D of size 33 x 25 x 3mm at 1.419 Kg/m and mullion \"J\" section (F4B) of size 46x25 x 3mm at 2.28 kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419 Kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance.The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames.Horizontal stiffeners using 18x5mm MS flat at 0.70 Kg/m at 3 Nos. of sturdy hinges and Two number of handle-cum-latch of special type made with 18x5mm MS Flats are revetted to the shutters at an appropriate height in window.Suitable opening is left for its easy operation. (Two Leaf) |
| 17 | Painting the walls two coats with approved cement paint over one priming coat etc.,complete complying with standard specifications. |
| 18 | Wiring with 2x1.50 Sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V Grade in suitable PV C rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T.Switch with painting of suitable colourful Open PV C light point. |
| 19 | Wiring with 2x1.50 Sqmm (22/0.3) PVC insulated unsheathed Cu. Conductor of 1100 V Grade in suitable PV C rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking CS Plug with painting of suitable colour with continuous earth wise connection of 14 SWG TO and with TCwire for open PVC Plug Point. |
| 20 | Wiring with 2x1.50 Sqmm (22/0.3) PVC insulated unsheathed Cu. Conductor of 1100 V Grade in suitable PV C rigid pipe on wall and ceiling with PVC accessories and with TW switch box with 5A F.T. Switch inflush with wall covered with hylum sheet of 3mm thick with paiting of suitable colour for open PVC light / fan point ( For electronic regulator) (5 points per coil) |
| 21 | Supply fun off 4 to 6 sq mm ploythene insulator and sheathed (Heavy Duty) service meter Aluminum cable of 1100 grade on bearer wire for service connection main (SI 61) |
