Institute Of Medical Sciences-IOMS has published Tender For Providing And Fixing Of False Ceiling And Alluminium Partition At Old Dialysis Block Rims,Imphal. Submission Date for this Tender is 29-09-2023. False Celing Tenders in Imphal West Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under,including cutting the patch in proper shape, rakingout joints and preparing plastering the wall surface with whitecement based polymer modified self curing mortar, includingdisposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 2 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. |
| 3 | in grating, frames, guard bar, railing, brackets, gates and similar works. |
| 4 | Providing and fixing at all height false ceiling including providingand fixing of frame work made of special sections, power pressedfrom M.S. sheet and galvanised with zinc coating of 120 gms/ sqm(both sided inclusive) as per IS : 277 and consisting of angle cleatsof size 25mm wide x 1.6mm thick with flanges of 27mm and37mm, at 1200mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5mm diax50mm long with 6mm diabolts,other flange of cleat fixed to the angle hangers of25x25x0.55mm of required length with nuts and bolts of requiredsize and the other end of the angle hanger fixed with intermediateG.I. channels 45x15x0.9mm running at the spacing of 1200mmcentre to centre, to which the ceiling section 0.5mm thick bottomwedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clipsmade out of 2.64mm diax230mm long G.I. wire at every junction,including fixing perimeter channels 0.5mm thick 27mm high havingflanges of 20mm and 30mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws @ 230mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with thehelp of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing andfinishng to a flush finish of tapered and square edges of the boardwith recommended jointing compound,jointing tapes, finishingwith jointing compund in 3 layers covering upto 150 mm on bothsides of joint and two coats of primer suitable for board,all as permanufacturer"s specification and also including the cost of makingopenings for light fittings, grills, diffusers, cutouts made withframe of perimeter channels suitably fixed, all complete as perdrawings, and specification and direction of the Engineer in Chargebut excluding the cost of painting with : |
| 5 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I |
| 6 | Providing and fixing 9mm heavy duty cement fibre board on walls |
| 7 | Providing and applying white cement based putty of averagethickness 1mm,of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smoothcomplete. |
| 8 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 9 | Wall painting with acrylic emulsion paint, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coatswherever required, to achieve even shade and colour. |
| 10 | Two coat |
| 11 | Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) |
| 12 | For fixed portion. |
| 13 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 14 | 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-1 medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT-I conforming to IS 3087 bonded with BWP type |
| 15 | Cutting out cracks of Wall to V-section, cleaning out, wetting grouting with cement & sand slurry. |
| 16 | Reconstruction of damp proof course old building by SIKA damp proof slurry VPN 25 KG mixed with admixture to provide a water proof and damp proof finished over micro concrete of non shrinkage.The application of the layer shall be of 2mm thickness apply in two layer.The DPC has to be proctected with a levelling screed of ultraefficient concrete finish.During the application,care sholud be taken that the DPC shall not be procure consumption. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
