Military Engineer Services-MES has published Tender For Special Repair To Bldg No T-1 Of ( Offers Mess ) , Additional / Alternator To Bldg No T-14 ( Sm Barrack ) & Provn Of Plinth For Establishments For Plastic Dustbin Under Age Br-Ii At Rms.. Submission Date for this Tender is 03-10-2023. Building Work Tenders in SHILLONG Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-10-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering etc complete all as specified and as directed. |
| 2 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed. |
| 3 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and as directed. |
| 4 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed. |
| 5 | M&L for rendering 15 mm thick in CM (1:4) on one side of lathing surface finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 6 | M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 7 | S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and as directed. |
| 8 | M&L for brick work with sub class "B" bricks (old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc complete all as specified and as directed. |
| 9 | M&L for Brick work with sub class B bricks (old size burnt bricks) straight or curved on plan exc 6.00 m mean radious built in CM (1:6) etc complete all as specified and as directed. |
| 10 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 11 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 12 | M&L for second class hardwood as in scantlings clean sawn timberfixed etc complete all as specified and as directed. |
| 13 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) etc complete all as specified and as directed. |
| 14 | All as per itemNo. 13.00 here-in-above but exceeding 1.5 Sqm and not exceeding 4 Sqm each ` |
| 15 | S&F size of frame 125 x 60mm Pressed steel frames (thickness of MS sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 16 | M&L for 30mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed. |
| 17 | M/L 35mm thick factory made 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and as directed. |
| 18 | S & F,Solid PVC Door Frame factory made of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification etc complete all as specified and as directed. |
| 19 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification etc complete all as specified and as directed. |
| 20 | M&L for Powder Coatedaluminium( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 21 | S&F for Powder Coatedaluminium ( minimum thickness of powder coationg 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. |
| 22 | S&F for Powder Coatedaluminium ( minimum thickness of powder coationg 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 23 | M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 24 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 25 | S & F 100 size stainless steel butt hinges etc complete all as specified and as directed. |
| 26 | Supply & Fixing150 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed. |
| 27 | S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixedetc complete all as specified and as directed. |
| 28 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 29 | S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed. |
| 30 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 31 | M&L for rendering 15mm thick in CM (1:6)on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and as directed. |
| 32 | M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 33 | M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat ofprimer etc complete all as specified and as directed. |
| 34 | M&L for applying two coats of oil bound distemper on new plastered surfaces of wallsover a coat of primer including preparation of surface etc complete all as specified and as directed. |
| 35 | M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying two coats of oilbound distemper on walls over a coat of primer etc complete all as specified and as directed. |
| 36 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coats of synthetic enamel paint over a coat of redoxide on new surfaces in any tint etc complete all as specified and as directed. |
| 37 | All as per itemNo. 36.00 here-in-above but applying two coats of synthetic enamel paint over a coat of pink wood primer on new wooden surfaces etc complete all as specified and as directed. |
| 38 | Demolition, Cement concreteof any description and in any position not otherwise specifically provided forincluding removing demolished material off the premises etc complete all as specified and as directed. |
| 39 | M&L for75 mm thick PCC (1:3:6) type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and directed. |
| 40 | M&L for cement concrete type C-2 (1:3:6) (using 40 mm graded stone agg) as in surface channels and drains etc complete all as specified and as directed. |
| 41 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and as directed. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tilesrubbish off the premises etc complete all as specified and as directed. |
| 43 | M&L for Coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc 0.18 sqm but not exc 0.36 sqmin floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including15 mm thick screed bed or bedding layer in cement mortar (1:6) etc complete all as specified and as directed. |
| 44 | M&L for Coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished ,area of each tiles exc 0.18 sqm but notexc 0.36 sqmmatching with floor as in skirting etc and laid over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed. |
| 45 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick CM (1:4) screed bedetc complete all as specified and as directed. |
| 46 | All as per itemNo. 45.00 here-in-above but on vertical surfaces such as skirting , dado risers to stepslaid over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed. |
| 47 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles laid over and including 10mm thick CM (1:4) backing coat etc complete all as specified and as directed. |
| 48 | S&Fin repair 20mm diaHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 49 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed. |
| 50 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc complete all as specified and as directed. |
| 51 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and as directed. |
| 52 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and as directed. |
| 53 | M & L 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boardsetc complete all as specified and as directed. |
| 54 | M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 3 sqcm but not exc 6 sqcm etc complete all as specified and as directed. |
| 55 | M&L for Toughned glass12 mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required incl Handle and connecting fitting etc complete all as specified and as directed. |
| 56 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and as directed. |
| 57 | M&L for TMT bars, 6 to 8mm and over , cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia etc complete all as specified and as directed. |
| 58 | M&L for precast cement concrete type B1 (1:2:4)(Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok etc complete all as specified and as directed. |
| 59 | Taking upor down steel tubing and connections with all fittings for 15 mm bore GI tubing etc complete all as specified and as directed. |
| 60 | Taking upor down steel tubing and connections with all fittings for 20 mm bore GI tubing etc complete all as specified and as directed. |
| 61 | S&FSteel tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and as directed. |
| 62 | S&FSteel tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and as directed. |
| 63 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed. |
| 64 | M&L in repairfor vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor etc complete all as specified and as directed. |
| 65 | M&L in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe incl Urinal spreader etc complete all as specified and as directed. |
| 66 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual flush type complete all as specified(Make Cera, Cat no. F1020106 or equivalent make as in Appx B) etc complete all as specified and as directed. |
| 67 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium platedscrewed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed. |
| 68 | S& F in repairs Pillar taps, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered ‘Hot" or ‘Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and as directed. |
| 69 | S&F in repairs for 15mm dia of pipe stopvalves,fancy type and chromium plated screwed down high pressure screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed. |
| 70 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers etc complete all as specified and as directed. |
| 71 | S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union,etc complete all as specified and as directed. |
| 72 | Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and as directed. |
| 73 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and as directed. |
| 74 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws etc complete all as specified and as directed. |
| 75 | S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc complete all as specified and as directed. |
| 76 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and as directed. |
| 77 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and as directed. |
| 78 | S&F of 110mm bore PVC (SWR) bends etc complete all as specified and as directed. |
| 79 | S&F 75mm PVC(SWR) bends any radius with acess door etc complete all as specified and as directed. |
| 80 | S&F of 75mm bore PVC (SWR) Vent cowl etc complete all as specified and as directed. |
| 81 | S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 82 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc complete all as specified and as directed. |
| 83 | Dismantling water tank of exc 250 ltr and not exc 500ltr Capacity etc complete all as specified and as directed. |
| 84 | S&F rotational moulded polyethylene 500 Ltrs Capacity double layer water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and as directed. |
| 85 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 86 | S&F Rolled sections as in roof truss, purlins including cleatsGDE Fe 410-0-or Fe 310-0 etc complete all as specified and as directed. |
| 87 | S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and as directed. |
| 88 | Surface Excavation not exceeding 30Cm deep in any type of soil etc complete all as specified and as directed. |
| 89 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point etc complete all as specified and as directed. |
| 90 | M&L hard core with broken stone over rammed earthgauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces etc complete all as specified and as directed. |
| 91 | M&L for 100mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregateas in sub base etc complete all as specified and as directed. |
| 92 | M&L for 150mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in hard standingfinished even and smooth without using extra cement etc complete all as specified and as directed. |
| 93 | M & L for forming12mm thick & 150mm deep expansion Joint sfilled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound Grade "B" etc complete all as specified and as directed. |
| 94 | M & L for formingContraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compoundGrade "B" etc complete all as specified and as directed. |
| 95 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface etc complete all as specified and as directed. |
| 96 | Taking down carefully by unscrewing fromfittings any type such as Decorative lights fittings, bulk head fittings, tube light fittings etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) etc complete all as specified and as directed. |
| 97 | M&L for point wiring with1.5 Sqmm (nominal area) pvc insulated and un-sheathed single core FR-LSH copper cable 1100 Volts grade with multistrandedcopper conductor in and includingPVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting modular switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed and including necessary cutting chase of wall and making good to match with existing surface etc complete all as specified and as directed. Make of wire : Richa/RR Kabel/Finolex Make of PVC Conduit: Supreme/ Ori-Plast/ finolex |
| 98 | (a) Onelight/Fan/Exhaust pointcontrolled by one, one way switch . |
| 99 | (b) One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 100 | (c) One 3 pin socket outlet 5 Amps on the Independent board. |
| 101 | All as per item No- 97.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 102 | M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed.Make : Havells/Legrand/Anchor |
| 103 | M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed. Make : Havells/Legrand/Anchor |
| 104 | M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed. Make : Havells/Legrand/Anchor |
| 105 | M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.Make : Havells/Legrand/Anchor |
| 106 | M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed. |
| 107 | M&L forceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Anchor/Legrand/Kinjal |
| 108 | S&F for Metal flush box 3 Module complete all as specified and as directed. |
| 109 | S&F for Metal flush box 4 Module complete all as specified and as directed. |
| 110 | S&F for Metal flush box 6/8 Module complete all as specified and as directed. |
| 111 | S&F for White cover plate with frame3 Module complete all as specified and directed. |
| 112 | S&F for White cover plate with frame 4 Module complete all as specified and directed. |
| 113 | S&F for White cover plate with frame 6/8 Module complete all as specified and directed. |
| 114 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 115 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of6 Sq mm and one run of 6 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 6 Sq mm + one run of 6 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 116 | Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades,hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed. |
| 117 | M&L in replacement for Decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and as directed. Make: Havells/Bajaj/Surya |
| 118 | Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting etc complete all as specified and as directed. |
| 119 | Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and as directed. |
| 120 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and as directed. |
| 121 | M&L for Distribution board double door type (for incoming MCCB 100 Amps 4 Pole & out going MCBs) DPX 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing only incoming MCCB and MCBs of various rating capacity including taking down old unsv DB of any capacitycomplete all as specified and as directed. |
| 122 | M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed. Make : Legrand Cat Part No 507611/ABB/Siemens |
| 123 | Supply and fixingMCCB 3 Pole .415 Volts fixed type, 25 to 100 Amps with breaking capacity 16 KAcomplete with connection testing and commissioningetc complete all as specified and as directed.: Legrand Cat Part No 408618/ABB/Siemens |
| 124 | Supply and fixingMCB SPN 40-63 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed. Make : Legrand Cat Part No 408618/ABB/Siemens |
| 125 | Supply and fixingMCB SP 6-32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.Make:- Legrand Cat No 408587-95 /ABB/Siemens |
| 126 | M&L for metal clad AC socket point single pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. Make: Havells/HPL/Legrand |
| 127 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 50 sq mm, 3.5 core complete all as specified and as directed including taking out old unserviceable cable. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. |
| 128 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed. |
| 129 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 130 | M&L for spreading fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken. |
| 131 | M&L for laying bricks sub class "B" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 132 | Supply & laying tubes "light grade" galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya |
| 133 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
