Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Cleaning of roof terraces of RCC buildings, car sheds, scooter sheds, porticos, balconies etc., at all floors, heights and locations including removing the dried leaves, branches, twigs, dust, deposited sludge, garbage etc., cleaning thoroughly and disposing off the above accumulated materials within a lead of 300 m and for all lifts with cost of labour, scaffolding, tools & plants etc., all complete as per specifications and directions of Engineer-in-Charge. |
| 2 | Roofs and chajjas made of R.C.C., AC/GI/PVC /Particle board sheets (Plain/corrugated).Note: Straight length of corrugated sheet roofs, shall be measured for payment (corrugations will not be measured) |
| 3 | A.C/GI sheet curved roof including gutters. Note:Plan area dimensions including gutters shall be measured for payment (curved length along the curvature will not be considered). Only length and breadth of the roof plan dimensions shall be measured for payment. |
| 4 | Removing the chokages / blockages from manholes, water closets& drainagelines by rodding or PVC hose pipe with water pressure jet including removing the sludge/dust/roots/any other foreign material settled inside the manhole/drain lines and disposing off the removed material within a lead of 200m andcleaning the manholes and drain lines with fresh water, etc.,complete with cost of materials, labour, ladders, tools & plants, safety equipments,all as per specifications and directions of Engineer-in-Charge.Note : Measurement for payment of this item shall be based on Number of manholes only.Drain lines laid between manholes shall be cleaned thoroughly but no separate payment will be made for this.Therefore the quoted rate shall also include the cost of cleaning of drain pipe lines between manholes |
| 5 | Manholes having covers upto 0.25 sqm. in area or open drains with covers(drain each cover shall be measured as on manhole and approx width of drain varies from 300 to 450 mm and depth450 to 600mm ) |
| 6 | Manholes having covers more than0.25 sqm. in areaincluding water closets. |
| 7 | Cleaning manually or by means of deploying mechinery and sterilization with bleaching powder solution of the following underground RCC water tanks/overhead tanks of different capacities at all heights and locations at AMD Office Complex, Lab storesand Divyanushakti Apartments including washing the tanks/sumps with fresh water, cost of cleaning agents, bleaching powder, scaffolding, ladder, brooms, brushes materials, tools & plants and labouretc. all complete as per the specifications and as directed by Engineer-in-Charge. |
| 8 | UG sump |
| 9 | OH tanks |
| 10 | Cutting / pruning of tree branches having a girth between 30 cm and upto 60 cm at all heights and locations with all required safety scaffolding including cutting the branches into small pieces and transporting and stacking within a lead of 200 m etc., complete with cost of labour, tools & plants etc all as per thedirections of Engineer-in-Charge. |
| 11 | Felling or Cutting ofdead/dried tree having a girth between 120 cm and upto 240 cm ( measured at aheight of 1.0m above ground level) at locations with all required safety scaffolding including cutting thetrunk and branches into small pieces, removing the roots , and transporting and stacking within a lead of 200 m etc., complete with cost of labour, tools & plants etc all as per thedirections of Engineer-in-Charge. |
| 12 | Disposing off surplus earth / Incinerator waste / buildings debris/ concrete or stone debrisin contractor’s own lorries at MCHapproved dumping yard at contractor’s risk and cost including transportationloading and unloading, tools & plants etc., beyond 50 m initial lead, for all leads including all lifts involved, all as per specifications and directions of Engineer-in-Charge.Note : The quantity loaded in the truck shall be reduced by 30% for broken asbestos roofing sheets/debris, 20% for earth & Incinerator waste and 50% in case of stones / rubbles towards voids for payment purpose. |
| 13 | Earth work excavation in trenches or drains, foundation in all kinds of soils, other than hard and soft rock not exceeding 1.5m in depth including consolidating the foundation bed, dewatering, shoring etc., and disposing offthe surplus earth within a lead of 150m complete with cost of labour, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 14 | Earth work excavation in trenches or drains, foundation in all kinds of soils, other than hard and soft rock where undergroundelectrical/ tephone cables, water/ sewage pipe lines are existing and refilling of trench after repairsincludingdewatering, shoring etc., and disposing offthe surplus earth within a lead of 150m complete with cost of labour, tools & plants all as per specifications and directions of Engineer-in-Charge.(Trench size approx 600x 600 mm.) |
| 15 | Demolition of the following likebrick masonry walls / brick batcoba / marble stone/Ceramic floorings in toilets constructed in cement mortar,concrete / B.T. road, cement mortar plastering (15mm to 20mm thick) manually with chisels at all floors / locations (upto a height of 25m ) including giving necessary temporary supports and disposing off the debris within a lead of 150m, complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-charge |
| 16 | Demolition of brick masonry walls / brick batcoba / marble stone/Kotastoneslabs,Ceramic floorings in toilets/ in stairs constructed in cement mortar |
| 17 | Demolition of Plain Cement Concrete, IPS flooring |
| 18 | Demolition of R C C including cutting and stacking of reinforcement |
| 19 | Demolition ofB.T. road |
| 20 | Demolition ofWBM road |
| 21 | Demolition of cement mortar plastering (15mm to 20mm thick) |
| 22 | Dismantling doors, windows and clear storey windows (Steel or wood) of area 3 sqm & below including shutters and chowkhats (frames) Architraves, holdfasts, hardware itemsetc complete at all floors and heights and stacking within 150 metres lead all as per specifications and directions of Engineer-in-charge. |
| 23 | Dismantling doors, windows and clear storey windows (Steel or wood) of area beyond 3 sqm including shutters and chowkhats (frames) Architraves, holdfasts, hardware itemsetc complete at all floors and heights and stacking within 150 metres lead all as per specifications and directions of Engineer-in-charge. |
| 24 | Filling of internal / external cracks of more than 1mm width at all floors/ heights and locations (within a height of 30 m) using acrylic latex chaulk crack filling compound / sealant manufactured of approved make including making V shaped grooves along the crack, cleaning, removing all loose matter, dirt, and dust and applying the crack filling compound /sealant using catridge guns as per manufacturer’s instructions / specifications on the wallstogether with cost of scaffolding, all materials, labour, curing, tools & plants etc., all completeas per specifications and directions of Engineer-in-Charge. |
| 25 | Internal cracks |
| 26 | External cracks includingpainting twocoats of exterior grade emulsion paint of existing shade over primer |
| 27 | Brick work in cement mortar 1:6 (1 cement :6 sand ) in foundation and plinth using best quality conventional kiln burnt light weight bricks of class designation 3.5 N/mm 2 including raking out joints, scaffolding, curing etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 28 | Brick work in cement mortar 1:6 (1 cement :6 sand ) in super structure for walls and brick bat coba in C.M 1:6 at all levels, floors and locations (upto a height of 25m )using best quality conventional kiln burnt light weight bricks of class designation 3.5 N/mm 2 including raking out joints, scaffolding, curing etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.. |
| 29 | Half brick work in CM 1:4 in superstructure at all levels, floors and locations (upto a height of 25m )using best quality conventional kiln burnt light weight bricks of class designation 3.5 N/mm 2 including raking out joints, scaffolding, curing etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 30 | 20mm thick cement plastering in two coats consisting of 1st coat of 15mm thick in CM 1:4 and 2nd coat of 5 mm thick in CM 1:4 over the brick/concrete wall surfaces in superstructure upto a height of 25m including raking out joints, scaffolding, curing,etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-charge. |
| 31 | Plain cement concreteusing 20mm size stone aggregate at all floors and locations (upto a height of 25m )including cost of mixing, consolidating, curing and finishing the top surface etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge |
| 32 | P C C 1:3:6 (1cement: 3sand: 6 aggregate)using 20mm size stone aggregate at all levels |
| 33 | P C C 1:2:4 /M15 (1cement: 2 sand: 4 aggregate) using 20mm sizestone aggregate at all levels |
| 34 | Reinforced cement concrete 1:1.5:3/M20 (1cement: 1.5 sand: 3 aggregate 20mm size) for lintels, beams, shelves, slabs. columns, footings, sun shades etc. at all locations including cost of mixing, consolidating, curing and finishing the top surface etc.( but excluding the cost of centering & shuttering ) complete with cost of materials,labour, tools & plants all as per specifications and directions of Engineer-in-Charge at all levels |
| 35 | Providing form work, Centering and shuttering using steel plates, planks including strutting and propping etc. at all floors and removal of the same for in situ reinforced concrete and plain concrete work including close haking of exposed concrete surfaces etc. complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge |
| 36 | Providing, fabricating and fixing reinforcement with high yield strength deformed bars or TMT bars of all dia., grade Fe 415/Fe500 conforming to I.S. 1786 for reinforced concrete works at all levels, floors and heightsincluding supplying, cutting, bending, fixing, and tying in position with 18 gauge soft drawn annealed binding wire etc, all complete with cost of materials, labour, tools & plants, scaffolding all as per specifications and directions of Engineer-in-charge. (Binding wire shall not be measured for payment.) |
| 37 | Fabricating and fixing reinforcement ,which will be supplied in available lengthsand diameters by Department a free of cost, of all diafor reinforced concrete works at all levels floors and heightsincluding shifting to site , cutting, bending, fixing, and tying in position with 18 gauge soft drawn annealed binding wire etc, all complete with cost of materials, labour, tools & plants, scaffolding all as per specifications and directions of Engineer-in-charge. (Binding wire shall not be measured for payment.) |
| 38 | Fixing of Indian/Europeanwater closet at all floors and locations and P trap, Jointing with hemp yarn, cement, white cement complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.Note: WC panwill be supplied by Dept. at Free of cost |
| 39 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 40 | Providing and fixingP/S trap to WC Jointing with hemp yarn, cement, white cement complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 41 | Providing and layingwith1st quality 5mm thick (Min)ceramic tiles for Flooring/dadoing/ skirting) of approved makein lines and levels of approved shade and design in toilets at allfloors (upto a height of 25m ) laid over 20 mm thick bed of cement mortar 1:3 complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 42 | 5mm thick (Min) Non slippery ceramic tiles of 300 x 300 mmsize for Flooring |
| 43 | 5mm thick (Min) ceramic tiles(300 x 300 mm or 450 x 300 mm size) for Dadoing |
| 44 | Supply, fabrication, erection and fixing in position M.S. structural steel work made of MS angles, flats, sheets, tees, channels, pipes etc., at all floors and heights including one coat of primer , cost of labour, scaffolding, tools & plants etc.., all complete as per specifications and directions of Engineer-in-Charge. |
| 45 | Fabricating, welding, errection and fixing in position M.S. structural steel workmade out of Old drill rods,MS Angles, channels, I beams, Box section, flats, sheets etc conforming to IS for doors, platform, purlins,frame works etc. atall floors, heights and locationsincluding cutting to the required size, shape, fixing and welding as per site requirement for frame /brackets and fixing as directed including giving a coat of red oxide primer complete with cost of materials, labour, tools & plants, scaffolding all as per specifications and directions of Engineer-in-charge. (Structural steel in available sizes and lengths wii be supplied by Department at free of cost.) |
| 46 | Applying wall care putty of approved makein two or more coats for areas more than 0.1m2 over a coat of cement primerand finishing the surface smoothin level and even on the existing oil Bound/Acrylic washable Distemper painted surfaces of the walls and ceilings at all floors, levels and locations, including removing the damaged / loose portions of the OBD /Acrylic washable distemper together with lappam /POP/putty base by scratching with lappam putty blade, sand papering, thoroughly washing with water, filling the paint removed portions with putty, preparing the surface by sand papering, removing stains, oil marks, cob webs, etc., scraping, filling cracks, and crevices upto 1 mm width with approved crack filling compound, cost of all the materials, tools and plants, labour, scaffolding, cleaning, floors, removing office furniture / Lab equipment and rearranging back the same etc all complete as per specifications and directions of Engineer-in-charge. |
| 47 | Applying knifing paste filler in two coats over entire surface area of wood surfaces including preparing the surface by sand papering, removing stains, oil marks, cob webs, etc., scraping, filling cracks, and crevices upto 1 mm width with approved crack filling compound, cost of all the materials, tools and plants, labour, scaffolding, cleaning, floors,all complete as per specifications and directions of Engineer-in-charge. |
| 48 | Painting one coat of Cement primer on the existing oil bound / acrylic washable distemper or lappam painted surface ofexternal/internal walls & ceilings and finishing the surface at all levels, floors and locations (upto maximum height of 25 m) including preparing the surface bysand papering, cleaning and removing the dust, dirt, oil marks, cobwebs etc., filling the cracks and crieves upto 1mm width with approved crack filling compound, and applying wall care putty wherever necessary for areas upto a 0.10 m2 (beyond this it shall be measured separately in the respective item) complete with cost of all materials, tools and plants, labour, scaffolding, cleaning floors, removing the office furniture / Lab equipment and rearranging back the same etc all complete as per specifications and directions of Engineer-in-charge. |
| 49 | Painting on internal surface of ceilings and walls at all floors heights and locations(upto maximum height of 25 m) using 1st quality Tractor Acrylic Distemper of of approved make in two or morecoats over the existing painted surface or primer coated surface including preparing the surface by sand paperingcleaning and removing the dust, dirt, loose painting, grease, oil stains, cobweb, fungus etc., and filling up small cracks upto 1mm width using approved crack filling compound and applying wall care puttywherever necessary for areas upto a 0.1 m2 (beyond this it shall be measured separately in the respective item) complete with cleaning floors, removing office furniture / Lab equipment before painting and rearranging back the same etc., all complete with cost of materials, labour, scaffolding, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 50 | Painting on internal surface of ceilings and walls at all floors, heights and locations(upto maximum height of 25 m) using 1st quality Apcolite Premium Interior Emulsion paintofapproved make in two or morecoats over the existing painted surface or primer coated surface including preparing the surface by sand paperingcleaning and removing the dust, dirt, loose painting, grease, oil stains, cobweb, fungus etc., and filling up small cracks upto 1mm width using approved crack filling compound and applying wall care putty wherever necessary for areas upto a 0.1 m2 (beyond this it shall be measured separately in the respective item) complete with cleaning floors, removing office furniture / Lab equipment before painting and rearranging back the same etc., all complete with cost of materials, labour scaffolding, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 51 | Synthetic Enamel painting in two or more coats using 1st quality SE paint- Apcolite Synthetic Enamel ofapproved make and shade over wood/steel /concrete/road kerb stones surfaces of internal areas at all floors heights and locations (upto a max height of 25 m) including filling up small cracks and crevices with approved filling compound, cleaning, washing, removing the dust, dirt, scales, grease, oil marks, loose painting thoroughly, sand papering wire brushing if necessary, completewith cost of materials, labour, scaffolding, tools and plants all as per specifications and directions of Engineer-in-charge. |
| 52 | One coat of wood primer using 1st quality of approved make and shade over wood/steel surfaces of internal areas at all floors heights and locations (upto a max height of 25 m) including filling up small cracks and crevices with approved filling compound, cleaning, washing, removing the dust, dirt, scales, grease, oil marks, loose painting thoroughly, sand papering wire brushing if necessary, completewith cost of materials, labour, scaffolding, tools and plants all as per specifications and directions of Engineer-in-charge. |
| 53 | Polishing in three or more coats over the existing polished pelmets,doors,shutters, windows, wall panelling etc including cleaning the dirt, dust, grease, oil markings, stains etc at all floors heights and locations and sand papering, filling up cracks and crevices with approved compound, complete with cost of materials labour, tools plants, scaffolding etc all as per specifications and direction of Engineer-in-charge. |
| 54 | Painting with first quality exterior emulsion paint of 100% Acrylic based of APEX of approved make and shade with / without a coat of corresponding Exterior emulsion primer of approved shade on the sand face plaster surfaces (new or painted) at allfloors heights and locations (upto a maximum height of30 m) including filling upthe small cracks and crevices, withapproved filling compound, cleaning ,washing, removing the dust, dirt, scales, grease, oil marks,loose painting thoroughlysand papering, wire brushing if necessary, complete with cost of material, labour, scaffolding, tools & plants etc., all as per specifications and directions of Engineer-in-Incharge.Note: A co-efficient of 1.50 shall be applied over the area measured flat on the rough cast surfaces to get equivalent plain area for payment. |
| 55 | Exterior emulsion paint of 100% Acrylic based with Exterior emulsion primer |
| 56 | Exterior emulsion paint of 100% Acrylic basedwith outprimer |
| 57 | Replacement of broken or damaged Asbestos cement corrugated plain /curved sheets or G.I. sheets from the roofs of car shed / scooter shed / stores shed at all heights and locations includingremoving the existing broken/ damaged sheets together with J bolts, nuts, washers and providing andfixing newbelow givenA C or PPGI sheets with new bolts/ nuts/washers/MS stiffener flat pieces, disposal off the debris with in a lead of 150 mts etc all complete with cost of scaffolding, labour,materials,tools & plants etc., all as per specifications and directions of Engineer-in-charge. |
| 58 | Asbestos cement6mm thick corrugated sheets |
| 59 | Pre-painted galvanised iron profile sheets (0.50 to 0.6 mm thick) |
| 60 | Shifting of scrap materials such as MS I beams,channels & other iron sections ,wood ,furniture,dismanteled machineries / equipments etc. material from AMD office complex, Begumpet/ Shyamlal to AMD lab store at ECIL post, NFC compound (distance is 16.0km approx)including gas cutting the MS/iron items or cutting the wood into peices, shifting of materials from different floors/locations to the truck,loading, transportation, unloading, stacking complete with cost of labour, scaffolding,chainpully, tools & plants etc allas per specifications and directions of Engineer-in-Charges.Note: Minimum 4 labourers shall be engaged for loading and un loading each truckload apart from shifting of materials to truck. |
| 61 | With cotractor\"s truck or DCM with200cft/5.0 ton capacity including hire charges |
| 62 | With Departmental truck provided at free of cost |
| 63 | Repairs to the external and internal damaged RCC members such as Fins, drops, beams columns ceilingetc at all heights using double scaffolding by applying polymer modified cement mortar treatment using approved Styrene Butadine Rubber ( SBR Latex) polymer of approved makecomprising of the following operationscomplete with cost of scaffolding, labour, materials, tools & plants etc., all as per specifications and directions of Engineer-in-charge.a) Chipping of loosespoiled and damaged concrete from drops,facia beams,columns very carefully exposing the cracks, crevices etc dressing with chisel the cut open partition to correct shape and level as directed by the Engineer-in -Charge,disposing offdebris at the location shownwith in 150 metre lead b) Cleaning the reinforcement bars throughly from all sides by light tapping, wire brushing, rubbing with emery paper and finally with acetone. c)Applying protective coat to reinforcement bars made out of one part SBRwith one point five parts of cement by volume(1:1.5) or |
| 64 | or as recommendeded by manufacturer.d) Applying bond coat to old concrete surface made out of SBR with 50mm thick in Grade M 25 with cement content not less than 330 kg per cum cement by volume in the ratio of 1 : 1.5or as per manufacturers\" recommendations.e) Reinstate the area with Polymer modified mortar in layers not more than 20mm thick made with following proportion - Cement 1 kg. - sand 2.5 kg(silica sand 0.75 kg +River sand at 1.75kg confirming to IS:383 Zone-II)-SBR 200 ml and water to suit workability. Bond coat shall be applied after each layer.f) Double scaffolding shall be errectd, where ever necessaryfor carrying out above operations.Note:Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer,bond coat but shall exclude cost of reinforcement,, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made onlyafter proper wet curing has been done and surface has beensatisfactorily evaluated by sounding/tapping with a blunt metal instrument). |
| 65 | Paintingblack Bitumastic anti-corrosive paint in two or more coats over the existing painted pipes of old drainage / Sanitary / Storm water vertical down take pipes of follwoing dia, including cleaning the surface, sand papering, washing, removing all scales, dust, dirt , scaffolding, complete with cost of materials, labour, tools & plants, safety equipment etc as per specifications and directions of Engineer-in-charge. |
| 66 | 100 mm diameter pipes metre |
| 67 | 150 mm diameter pipes metre |
| 68 | Shifting of materials, small machinery, ,dameged lab. equipments,, M.S. scrap, scrap etc. about 50cft of matterials or 500 kgwhich ever is more within the complex premises at all the floors, lifts with in a lead of 150mcomplete with cost of material, labour,toolsetc., all as per specifications and directions of Engineer-in-Incharge. |
| 69 | Repair / replacement of hinges forsteel window shutters at all locations, floors includingproviding, fixing /weilding suitable hinges including removing the damaged hinges, setting the window shutter properly complete with cost of material, labour,tools and plants, safety precautionsetc., all as per specifications and directions of Engineer-in-Incharge. |
| 70 | Desludging of septic tanks at AMD complex, Begumplet andand lab stores at NFC premises using mechanicaldesludging tankers ormannually and disposing at municipal approved area complete with cost of machinery, labour,tools and plants, safety precautionsetc., all as per specifications and directions of Engineer-in-Incharge. |
| 71 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 72 | Painting with Aluminium paintin two or more coatsusing 1st qualitypaint of approved make over oldpainted surfaces of street lightsat allheights and locationsincluding necessary scaffolding,filling up small cracks and crevices with approved filling compound, cleaning, washing, removing the dust, dirt, scales, grease, oil marks, loose painting thoroughly, sand papering wire brushing if necessary, completewith cost of materials, labour, scaffolding, tools and plants all as per specifications and directions of Engineer-in-charge. |
| 73 | Street lamp /light post oflength/ height upto approx. 9.0m having dia. 160mm to 70mm and painting S.E . Paint tolight dome |
| 74 | Street lamp /light post oflength/ height upto approx.3.60m having dia. 160mm to 70mm and painting S.E . Paint tolight dome |
| 75 | Providing and fixing APP (Atactic Polypropylene polymer) modified pre fabricated five layer, 3mm thick water proofing membrane, black finished reinforced with non woven polyster matt, finished on thermo fusible film on the underside approved manufacture consisting of coat of bitumen primer for bitumen membrane @0.40litrs per sqm by the same membrane manufacturer of density at 25 deg.C, 0.87 - 0.89kg/ltr and viscosity70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints an overlap of 100 and 75mm on the longitudinal and transverse directions and overlaps should be thermo fused to make the surfaces monolithic and preparing the surface and applying 2 coats of reflective aluminum painting on top of the finished surface complete cost of materials,labour, scaffolding tools & plants all as per specifications and directions of Engineer-in-charge.Note: Payment will be made only for flat areas only. No extra payment will be made for overlaps/joints/tucking inside groove etc.. |
| 76 | Supplying and fixing of 1-phase, 230volts, delivery head 2.5 meters submersible pump of approved makeof suitable capacity for the air cooler. Complete with cost of materials, labour, scaffolding, tools & plants all as per specifications and directions of Engineer-in-Charges. |
| 77 | Supplying and fixing of 37 1/2\"\"x27\"\"x7\"\" G.I. water tank suitable to the air cooler (bottom)complete with cost of materials, labour, scaffolding, tools & plants all as per specifications and directions of Engineer-in-Charges. Note: Contractor is required to make GI water tank of suitable size after taking exact measurements. |
| 78 | Supplying and fixing of CPVC float/ ball valves 20mm dia.PVC flexible connectorcomplete with cost of materials, labour, scaffolding, tools & plants all as per specifications and directions of Engineer-in-Charges. |
| 79 | Dismantling and re- erection of air coolers after attending following repairs/ maintenance.1. Dismantling of room air cooler installed on chajjas(externally) at all floors and levels and bringing down.2.Dusting & cleaning of all parts of the cooler3. Replacing of complete old wood wool with new wood wool of all three panels and tying with plastic thread/rope4.. Re- erection of air cooler at same place and location complete with cost of materials, labour, scaffolding, tools & plants all as per specifications and directions of Engineer-in-Charges. |
| 80 | Dismantling and re- erection of air coolers after attending following repairs/ maintenance.1. Dismantling of room air cooler installed on chajjas(externally) at all floors and levels and bringing down.2.Dusting & cleaning of all parts of the cooler3. Scraping and removing of all old painted surfaces and cleaning thoroughly4. Applying two coats of SE painting over a coat of zinc chromate primer on all painting surfaces5. Replacing of complete old wood wool with new wood wool of all three panels and tying with plastic thread/ropecomplete with cost of materials, labour, scaffolding, tools & plants all as per specifications and directions of Engineer-in-Charges. |
| 81 | Laying of shabad stone slabs for floors, plinth protection etc.finishing/ pointing the joints withC.M. 1:3 including revoval of existing stone slabs preparing the bed, relaying of removed slabs or shabad stones supplied by dept at free of cost in line, level complete with cost ofmaterial, labour,tools and plants,etc., all as per specifications and directions of Engineer-in-Incharge. |
| 82 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid inrequired line, level, curvature, colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all completeas per the direction of Engineer-in-charge. (Old CC paver blocks shall be suppliedby the department free of cost |
| 83 | Painting speed breakers, kerb stones, lines, dashes, arrows etc.in One or more coats on old work withsolvent thinnable acrylicroad marking paint conforming to IS164 manufactured by of approved makeon bituminous/ cement concrete surfaces, including cleaning the surface, removing of all dirt, dust, scales, oil, greeseand other foreign matter, demarcation at site and traffic control complete with cost of material, labour,tools & plants etc., all as per specifications and directions of Engineer-in-C |
| 84 | Water proofing the Sunken Slab surface and wall with acrylic Polymer modified cementatious compound of brush bond RFXof approved manufacturedin two coatsincluding cleaning the surface and finishing the same with protective 15 mm thick plaster in CM 1:4 in neat punning in lines and levels and testing the job with cost of all materials, labour, tools & plants etc., complete as per specifications and as directed by Engineer-in- charge.Note :The work is required to be guaranteed for a period of 10 years from the stipulated date of completion of the work.Such guarantee shallbe executed on stamped paper of appropriate denomination in the prescribed proforma. |
| 85 | Filling in bath, W/C, urinal portion of sunken slab areas with cement concrete 1:2:4 (1 cement,2 coarse river sand, 4 brick aggregate 20mm to 40mm brickbat coba) using light weight bricks mixed with approved water proofing compound conplast 421 IC ofFosroc or equivalent@ 2% by weight of cement and making the surface finished suitable to receive floor finish complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. |
| 86 | Dismantling the brick bat coba and water proofing plaster in sunken slab portion of toilets (about 450 mm deep) at all floors including exposing the original concrete slab/beam surface, removing and disposing off the debris out side etc.,all complete with cost of tools and plants, labour and transportation as per specifications and as directed by Engineer-in- charge. |
| 87 | Providing and fixing 1st quality nano technology, double charged stain free vitrified tile for walls/dado skirting of suitable size and 9/10mm thick with water absorption less than 0.08% and conforming to IS 15622at all floors and locations within a lead of 50m and lift of 25.0m of approved pattern and colour (2 colours) of approvedmanufacturelaid over 20 mm or more thickcement mortar 1:3 (1 cement : 3 sand) bedding / backing and fixing the tiles with cementslurry and pointing the joints with matching colour Tile Grout compound of approved makefinished to line, level, slope, and plumb including cutting of tiles, making cut outs / opening wherever necessary, wastage, final cleaning of surfaces as required, curing etc., completewith cost of materials, labour, tools & plants, scaffolding all as per specifications anddirections of engineer-in-charge. |
| 88 | Note:After dismantling the existing dado together with cement mortar base, the surface shall be washed, remove the dust and dirt and plastering to be done to the required thickness in CM 1:4 to make good dismantled surface to plumb and to receive dado tiles. Nothing extra will be paid for additional thickness of plasterto make good the surface to plumb. The cost towards this plastering is deemed to be added in the aboverate. |
| 89 | Providing and fixing 1st quality nano technology, double charged stain free vitrified tile flooring(size 600mmX600mm , 9/10mm thick) with water absorption less than 0.08% and conforming to IS 15622at all floors and locations within a lead of 50m and lift of 25.0m of approved pattern and colour (2 colours) of approved manufacture make laid over laid over a bed of minimum 20mm thick bed of cement mortar 1:4 (using Crushed sand) including grouting with the joints with white cement based tile groutmatching with the colour of tiles, making openings or cut-out if necessary, wastage and final cleaning of surfaces as required curing etc., completewith cost of materials, labour, tools & plants, all as per specifications anddirections of engineer-in-charge. |
| 90 | Providing, cutting, laying and fixing of machine cut, mirror polished of17mm/18mm thick granite stone slabs of approved shades such asJet Black or any other approved two or more colours and texture for flooring / wall dados fixing in position at all levels, required size and shape as per pattern approved by Engineer-in-charge for kitchen platform/ dado/ horizontal and vertical borders /stair case treads, raiserslaid over 20mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment,epoxy touchups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc.complete with cost of all materials, labour, tools & plants scaffolding, wastage and final polishing etc., all as per specifications and directions of Engineer-in-charge. |
| 91 | Extra for edge moulding of following type to 18mm thick polished granite stone slabs of above shades allfloors and levels including machine polishing to edges of all exposed areas to give high glass finish etc., complete with cost of materials, labour, tools and plants etc., all as per specifications and directions of Engineer-in-charge. |
| 92 | Providing and fixing ISI marked 30 mm flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including all material, tools and plants as directions of EICNote: But Hinges shall be supplied by Dept. and same shall be fixed by the contractor. |
| 93 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) including all material, tools and plants as directions of EIC. |
| 94 | Supplying and fixing of Mosquito proof nettings made from polyester multifilament yarn having mesh: 156 per sq inch,Weight 20 + 5% gms per sq.Mtr.fixed to wooden frame with necessary second class teak wood beading of size 25m x15mmon all sides to the existing wooden Windows, ventilator in toilets at all floors and levelscomplete with cost of Velcro tape, 20mm width, screws, pins, stapleson all sides withcost of all materials, labour, tools and plants as per specifications and direction of Engineer-in-charge. |
| 95 | Providing and fixing vertical blinds with 100 mm width polyster synthetic fabric of best quality of approved make and color with all necessary accessories like web cord, tilting rod, nylon rope etc., including cutting into sizes fixing in position complete with cost of materials, labour, transport and as per manufactures/ recommendation and as directed by the Engineer In Charge. |
| 96 | Supplying, laying and fixing in position 2 mm thick PVC sheet of approved shadeand make to be laid onflooring using rubber based adhesives of approved quality and manufacturerincluding cost of Materials, labour, wastage, taxes etc,. all complete as direction of officer in charge |
| 97 | Dismantling of damaged window/doorglassincluding stacking of serviceable materials and disposal of unserviceable materials within 150 metres lead. |
| 98 | Providing and fixing glazing with With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) inwindow, ventilator shutters and partitions etc. with glass putty all around the glass and mseal at corners of glass etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 99 | Supplying and fixing Cast IronMan hole or Cast Iron Steps cover of approved duty and approved make including removal of damaged coveras directed by the Engineer in charge. |
| 100 | Supplying and fixing of antiskid rubber matts of thickness 12mmas directed by the Engineer in charge. |
| 101 | Providing and fixing MS Peg stay of 300mm (12\") to Steel windows of heavy type including SE Painting and necessary fittings asdirected by the Engineer-in-charge |
| 102 | Providing and fixing M.S.window handles (left/Right Side)with necessary fixtures for Steel windows including SE Painting and necessary fittings asdirected by the Engineer-in-charge |
| 103 | General Notes:1.The rates quoted shall hold good for all heights/depths above/below plinth level or average ground level unless otherwise specified. The rates quoted shall be for fulfillment of all the conditions and no conditional rebate shall be put forth by the tenderer which will attract rejection as indicated.2. The rates quoted shall be valid during contract period of one year and shall be in accordance with the minimum deployment of men, material and machinery including consideration of necessary additional deployment to suit detailed programming and actual conditions at site for completion of work within scheduled period stipulated.3.Any chases/holes in walls and floors of any materials and Reinstating to original condition wherever required are to be arranged by the contractor during the progress of the works. The chases/holes are to be filled as directed by the Engineer-in-charge at no extra costElectrical power and water required shall be supplied and recovered from the bills of contractors as per Schedule -B.4) Contractor shall inspect the site to acquaint with the site conditions as well as security conditions at AMD. |
| 104 | 5)Contractor shall quote rates for all items after considering cost of materials and labour components and all such conditions, elevations, leads, lifts, safety precautions, security restrictions that are necessary for satisfactory completion of work as per drawing/instructions and site conditions. Security regulations shall be followed.6)Police verification of labour engaged shall be produced for issuance of entry passes.7) Contractor shall read item description in conjunction with drawings thoroughly before quoting rates.8)The rates quoted shall include cost of all tools and tackles, manpower including wages, liveries, all wastages and taxes GST, Labour cess, IT, etc., as applicable but exclusive of EPF and ESI are exclusive. EPF and ESI are reimbursable as per relevant clause.9) All the items of works listed in schedule of quantities shall be done at a) AMD Complex, 1-10-153 to 167, Begumpet b) AMD 16 flats near Begumpet Post office c) AMD Labstores, NFC Premises, Moula Ali d) AMD quarters (106 nos), Shyamlal, Begumpet e) Divyanushakti Apartments, Ameerpet |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
