Tender For Contract For Renovation Of Dbo, 1St, 2Nd, 3Rd And 4Th Floor Of Gail Corporate Office Building At Bhikaji Cama Place, New Delhi, Delhi-Delhi

TDR : 39532673

Tender Notice
BOQ

Expired

Delhi , Delhi

Tender Brief : Tender For Contract For Renovation Of Dbo, 1St, 2Nd, 3Rd And 4Th Floor Of Gail Corporate Office Building At Bhikaji Cama Place, New Delhi

Document Fees
Refer document

EMD
₹ 2880000.0 /-

Tender Value
Refer document

Submission Date
05-10-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CIVIL
2	BRICK WORK
3	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to any floor level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
4	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to any floor level. Cement mortar 1:4 (1 cement :4 coarse sand)
5	Extra for providing and placing in position 2 Nos 6mm dia. MS. bars at every third course of half brick masonry
6	MARBLE & GRANITE WORKS
7	Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red
8	Area of slab over 0.50 M2( For Counter)
9	Pre Engineered Marble for Kitchen Counter Top
10	Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning etc. complete.
11	Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble /Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.
12	Providing and fixing 10mm thick compact Toughned & Frosted glass urinal partitionsfixed with stainless steel frame 50x50mm . Overall height of 2800mm including 650mm gap from the bottom All types of hardware for fixing shall be inclusive in the quoted rate. shop rawing shall be prepared for approval of EICbefore execution.
13	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per M2, including pointing in white cement mixed with pigment of matching shade complete.
14	Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/M2 including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Granite Stone Cladding etc
15	Providing and fixing following 18mm Italian/Imported Marble stone. The stone to be fixed after putting dabs of neat cement on walls & resting stone on the Stone to be anchored at bottom and at top with \"L\" Shaped MS Cleats as per details. Back of stone to be filled with white cement slurry complete. Size of the stone to be atleast 2100mm height /length x600mm wide. Joints to be minimal and filled with white cement mixed with colour pigment to match colour of stone. The item include polishing the laid stone to give a plain, level and smooth finish complete.For LOBBY and entrance facia with (Botticino Classic ,Grey William, Royal Diana, Statuario Marble, Rosso Verona etc. to be White with minimum base rate of Aprox Rs. 800/Sqft.)
16	Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.
17	WOOD & PVC WORK
18	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
19	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
20	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 150 mm
21	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick
22	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
23	Extra for providing vision panel not exceeding 0.1 M2 in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square.
24	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood. 50x12 mm
25	Providing and fixing MS. grills of required pattern in frames of windows etc. with MS. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
26	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
27	Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm
28	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
29	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
30	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm
31	Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed of required colour and shade, with necessary screws bolts, nut and washers etc. complete.
32	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm
33	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper
34	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineerin-charge.
35	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
36	Providing and fixing approved brand and manufacture of Rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arM Silver finish. As per EN 1154. Approved Make : dormakaba/ Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
37	Providing and fixing approved brand and manufacture of 4012 wall mounted door stop dome with 60mm length with fixing accessories Approved Make : dormakaba/ Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
38	Providing and fixing approved brand and manufacture of Pure 8100 Type 3 Package with Pair of Pure 8100 Design Lever Handle on Roses & escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length oneside thumb turn otherside coin release operation Approved Make : dormakaba/ Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
39	Providing and fixing approved brand and manufacture of Stainless SteelTower bolt 300 mm long with 10 mm dia ( TR 1210SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
40	Providing and fixing approved brand and manufacture of Stainless Steel Tower bolt 150 mm long with 10 mm dia ( TS 610SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
41	Providing and fixing approved brand and manufacture of Stainless Steel Door Buffer wall mounted 22 mm dia,75 mm long (DB (22) along with necessary accessories andscrews etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
42	Providing and fixing approved brand and manufacture of Stainless Steel Handle 125 mm long with necessary accessories andscrews etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
43	Providing and fixing approved brand and manufacture of Stainless Steel Sliding Tower Bolt 300x16 mm long with necessary accessories andscrews etc. complete in all respects as per manufacture ofrs\" specificatios & as directed by Engineer-in-charge.
44	Providing and Fixing approved brand and manufacture of SS 304 Hinge 100x75x3mm Round Ball Bearing Hinge, EN 1935 Certified for 200,000 Cycle,105 min Fire rated, 5 years Functional Warranty SS 304 Hinge 100x75x3mm Round Corner (Hole Pattern: C) complete in all respects as per manufacture specificatios & as directed by Engineer-in-charge.
45	Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5per cent tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 M2)
46	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5per cent tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 M2).
47	Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on EA side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5per cent tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 M2)
48	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows, Doors and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With aluminium Snap beading.
49	Providing and fixing steel roller for uPVC / aluminium sliding window with necessary screws etc. complete.
50	Providing and fixing steel (white power coated) crescent lock for uPVC / aluminium sliding window/ door with necessary screws etc. complete.
51	Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 EA on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
52	Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).
53	Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 M2
54	Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
55	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 150 mm
56	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick.
57	STEEL WORK
58	Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.
59	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
60	Providing and fixing circular/ Hexagonal cast iron or MS. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick MS. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ MS. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia MS. bar bent to shape as per standard drawing.
61	Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 60 mm
62	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
63	FLOORING WORK
64	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) complete. 40mm thick with 20mm nominal size stone aggregate.
65	Extra for pre finished nosing to treads of steps of marble stone for item no. 1
66	Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 M for item no. 1
67	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ M2 including pointing the joints with white cement and matching pigments etc., complete.
68	Providing & Laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption\"s less than 0.08per cent and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete. Size of Tile 600x600 mm
69	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 per cent and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ M2 including grouting the joint with white cement & matching pigments etc. complete.
70	Size of Tile 600x600 mm
71	Size of Tile 600 x 1200 mm
72	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08per cent and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/M2 including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size
73	Size of Tile 600 x 600 mm
74	Size of Tile 800 x 800 mm
75	Size of Tile 600 x 1200 mm
76	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08per cent and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/M2 including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size
77	Size of Tile 600 x 600 mm
78	Size of Tile 600 x 1200 mm
79	Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.
80	Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/M2, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone (Botticino Classic ,Grey William, Royal Diana, Statuario Marble, Rosso Verona etc. to be White with minimum base rate of Aprox Rs. 465/Sqft.)
81	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
82	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
83	Providing and fixing150 mm wide Aluminium Skirting 3.15 mm thick of approved shade and colour with required Hardwares/screws/joints corner profiles etc all complete as per design and detail as per drg.
84	ROOFING
85	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from MS. sheets and galvanized with zinc coating of 120 gms/M2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm ofrequired length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm EA having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board
86	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ M2, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsectionsshall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 per cent) total coated thickness with zinc coating 120 grams per M2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 M or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 per cent) total coated thickness, Zinc coating 120 grams per M2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately). 12.52X 12.51 BCD GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/M2 (both sides inclusive) and 20per cent perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
87	Supply and Installation of 400mm wide customizedAluminium Magnesium Alloy perforated with NWT metal ceilingconsisting of panel 400m wide x 30 mm deep x 0.9 mm thick with bevel edge having panel minimum length of 5mtrs. The ceiling panels coil undergoes through levelling process on advanced CAD/CAM equipment to achieve levelling through arku six hi configuration roller levelling process to ensure the flatness of the coil in the manufacturing process and releves stresses of coil. Coil coated on a continuous paint line, Double baked and roll formed for higher straight and good roll forming characteristics. The panel ends are raised up to 28 mm . The panel about EA other with a narrow V groove. Panel shall be clipped to a backed enamelled aluminum panel carrier of 41.5 mm wide x 62 mm deep x 1.0 mm thick in standard length of 5 mtrs. made of double baked enamelled aluminum magnesium alloy black with cut outs to hold panels module of 400 mm and at distance of 2.4 mtrs. the carrier shall be suspended by means of GI threaded rod 6mm diameterat 1.3 mtrs. distance. The coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and topcoat of approved colour of 15 microns with Antimicrobial powder coating prevents the spread of dangerous micro-organisms and inhibits the growth of microbes on powder coated surface by inhibiting process of cell division. . If any MS Sub structure is required, it shall be provided by client or paid separately in the respective individual iteM The Metal ceiling should be Tested for Seismic Zone V compliance as per IS 1893 part 1-2016. Paint finish : The coils to go through various stages of pre-treatment, oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and top coat of approved colour of 15 microns. Green-pro certification: All ceiling shall be Green pro Certified: For LEED certification by Indian Green Building council (IGBC). Ceiling manufacturer should have local manufacturing unit in India. Manufacturer should have in-house powder coating lab with in house testing lab facility in India & having more than 20 years of existence in India.Mode of Measurements: Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc.Approved Makes - Hunter Douglas, Gorden, SAS,Fameline.
88	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards andbathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) 12 mm thick
89	Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on MS (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: MS (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.The jaali shall be duco polished as per direction of EIC
90	Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from MS. sheets and galvanised with zinc coating of 120 gms/ M2 (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm EA having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointingtapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture\"s specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.
91	One AHPCP-Aluminium High Pressure Composite Panel Providing AHPL Cladding. Providing and fixing Facia High Pressure Composite (AHPCP) of exterior grade with 15 years of warranty for cladding of Alutuff /Decorex / Alucobond approved make for external wall / column /Canopy cladding in combination of solid / Metallic colours/ Wooden Colours, including all necessary frame work and complete weather sealing. The facia panel should consist of 5mm High grade virgin polymer core of High pressure aluminium composite sandwiched between 2 skins of 0.25mm thick high strength aluminium Foil (alloy designation A3105 / H18) making a total panel thickness of 6mM The surface will be furnished with PVDF coating on top sides and service coating on reverse side with anti-water spot and 90 degree bend. Weight should be 7.5 kg/m², Section modulus should be 1.75cm³/m & rigidity 2400 kNcm²/m with elongation 22per cent (DIN EN 485-2). The testing done in shriram lab. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure as suggested by Structural Engineer/Proof Checker. All hardware shall corrosion resistant frame out of anodised aluminium member.
92	Providing and fixing of Baffle false ceiling system comprises 75 mm x 150 mm (75 mm width and 150 mm Height) U Shape panels. Panels shall be made of 0.7 mm thick Aluminium sheet with wooden finish powder coating on the front side with 60 microns powder coating. Length of the panel will be up to 3000 mM Panel shall be high corrosion resistance and good color stability. Panel to panel gap will be 150 mM Panels are fixed on to roll formed carriers 50 mm wide x 20 mm deep out of 0.75 mm G.I sheet powder coated with cutouts to hold the panels in module of 150 mm at maximum 1200 mm c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized thread rod hanger with height adjustment at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and Fasteners. Panels are factory cut in lengths up to maximum 3000 mm to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels. Inner cap and outer cap are used to nut bolt the panel with carrier. These Baffles are light weight and do not add any extra load on ceiling.
93	Wooden ceiling finish with veneer:Providing and fixing IS 71012 mm thickplywood false ceilingas per drawing & instruction of EIC & sample approved (complete with frame work). finish with 4 mm th veneer gurjan base ply Semi glossy malamine finish polish. Plywood shall be fixed with required fabrication work and ply framework with all necessary acessories Rate shall include cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/template where ever requiredThe rate shall be in sq.mt for all floors and at all heights including all costs the shop drawing (or a sample mock of 5 M2 minimum of the frame work and ceiling) shall be approved from EIC. 5mm Groove shall be provided at the junction of the false ceiling & the wall.(considering all levels with require all fabricataion work and fitiing from RCC slab to false ceiling100 to 1000 mm)
94	Open Cell Ceiling System Supply & Installation of Luxalon® Aluminium AA3105 Cell Ceiling 50E manufactured by HDI of approved colour consisting of Main Runner, Cross Runner, Upper Sections, Lower Sections all of U-Shaped Profiles 10mm wide x 50mm deep x 0.5mm thick with inwardly returned edges of 2.5mM Coil coated on a continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy for higher strength and good roll forming characteristics. The ceiling panels coil undergoes through levelling process on advanced CAD/CAM equipment to acheive levelling through ARKU SIX Hi configuration roller levelling process to ensure the flatness of the coil in the manufacturing process and releves stresses of coil. Cell ceiling panels should be manufactured from Roll forming machine to get the high-quality panels with accurate dimensions.Aluminium Alloy (Al.Mg) AA3105 for higher strength and good Roll Forming characteristics. The Main Runner shall be fixed at a distance of 1.2mtrs c/c and shall be suspended by means of G.I. Suspension Rod 4mm diameter and a Galvanized Suspension Spring Clip at a distance of 1.2mtr c/c. The Cross-Runner shall be fixed to the Main Runner at a distance 0.6mtrs c/c., with a self-locking device. The Upper Section and Lower section shall be fixed to the Main Runner and Cross Runner in a form of a Cell Structure of module 100 X 100 mm x 100mm in traingular cell shape with a self-locking device. Paint Finish: The baffle coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5microns and a coat of natural colour of 5microns, exposed surface to have a primer of 5microns, binder of 5microns and topcoat of approved colour of 15 microns. All ceiling shall be Green pro Certified: For LEED certification by Indian Green Building council (IGBC). Ceiling manufacturer should have local manufacturing unit in India. Manufacturer should have Roll-forming machine to produce Baffle panels & in-house testing lab in India & having more than 20 years of existence in India.Approved Makes - Hunter Douglas, Gorden, SAS, Armstrong
95	Providing & Fixing Of ?WPC Louvers Wall Panelling & Ceiling in modules of2900x160x23mm or 2700x200x14mmmade ofWood plastic composite as approved to be installed using special clip system as per the manufacture specification. Scaffolding to be provided by the client. All material should be of approved make & complete as per the drawing, specification and approval of architect.
96	WPC Wall Panelling
97	WPC Louvers False Ceiling
98	FINISHING WORK
99	12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
100	15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
101	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
102	6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)
103	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (EA = per bag of 50 kg cement used in mix)
104	Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
105	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
106	Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 M2) over and including priming coat of exterior primer applied @ 2.20kg/10 M2
107	Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
108	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
109	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
110	Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
111	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
112	Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
113	DISMANTLING AND DEMOLISHING
114	Demolishing cement concrete manually/ by mechanical means ( approx area 5000 sqm of all floors. 1st floor area =1. First Floor= 1184.40 sqm, 2. Second floor = 1412.00 sqm,3. Third Floor = 1030.00 sqm, 4. Fourth Floor- = 965.52 sqm 5. DBO at LG Floor = 300 sqm) including Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix),brick work In cement mortar manually/ by mechanical means, Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, arcTaking out doors, windows and clerestory window shutters (steel or wood) architrave, holdfasts etc. complete of all area and sizes, wood work in frames, trusses, purlins and rafters up to 10 Ms span and 5 Ms height, tile work in floors and roofs laid in cement mortar, wooden boardings in lining of walls and partitions, excluding supporting members, G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means, old plaster or skirting raking out joints and cleaning the surface for plaster, aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling, electrical wiring, fitings, HVAC ducting, data and telecom network, fire equipment and installation, PA system, including all tiling, ceiling, removal of windows, doors, sanitary fixtures, blinds etc including any item herein not mentioned but required for clerance of site including Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, upto any lead including all lifts involved.
115	ALUMINIUM WORK
116	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
117	With float glass panes of 5 mm thickness (weight not less than 12.50 kg/M2)
118	With float glass panes of 8 mm thickness (weight not less than 20 kg/M2)
119	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
120	DGU Glass: Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer high performance heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.1) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in M2 (i) Clear float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 per cent, Light reflection internal 10 to 15per cent, light reflection external 10 to 20 per cent, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc.
121	MISCELLANEOUS ITEMS
122	Providing and fixing certified restroom cubicle system of approved make comprising of green guard certified solid compact laminated water proof board, minimum 18 mm thick made as per IS: 2046 (phenolic core board) and as per BS-476/97 for fire retardant for toilet showers, water closet etc . The board shall be manufactured under high pressure and temperature by impregnating kraft papers and outer decorative papers with thermosetting phenolic/ melamine resins (low VOC). The cubicle system shall be resistant towards water, chemical, scratch, impact and heat and shall be anti bacterial, colour fast and shall haveaccessories like door knob, Gravity/ auto return hinges, privacy thumb turn with occupancy indicator, coat Hook, etc all in SS 304. The hardware and fixings includes anchoring of all fixed front panel to floor with SS 316 L brackets/ base plates with a clearance height upto 110 mm, and covered with SS 316 Shoe box plates, wall and corner joineries (brackets and channels) shall be SS 304 grade, SS 304 screws, rubber noise reduction tape .The cubicle unit shall be installed in approved finish, shades and colours as per specifications and directions of Engineer-In-Charge,including minimum 5 (five) years warranty against any moisture related damages to all intermediate panels, doors, hardqwares etc. Standard dimension of the cubicle system shall be of approx. 2100 mm Height(overall) x 1500mm Depth and 1000 mm Width which includes 600mm door size width.
123	I shaped Cubicle System consisting of front face panel including door and all necessary accessories, fittings and hardware etc.
124	L shaped Cubicle System consisting of front face panel including door, intermediate panel and all necessary accessories, fittings and hardware etc.
125	Providing and fixing Stainless steel 304 Grade H- type pull handle of size min 32 mm dia and 1200mmlong ofapproved make including SS screws, including making holes of required size in shutter etc. complete as per direction of Engineer-in-Charge.
126	Providing and fixing SS Bottom patch Lock with cylinder of approved make including necessary screws etc. all complete.
127	Providing and fixing SS floor mounted half dome door stopper of dia 45mm including necessary screws etc. all complete.
128	Translucent with visibility \"Providing and fixing of Deck make roller blind from Lux Series having sturdy aluminium top tube of 38mm diameter, powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain. The roller blind fabric should possess the below mentioned specifications with fabric made up of 85per cent polyester and 15per cent cationic polyester with openness factor - dimout & color fastness - 5 to 6. Roller blinds with solar protection fabric of high tenacity polyester Yarn & fungi static treatment and should block the light flux & offer elimination of glare and sunlight / heat radiance. Fabric shall have visible light & solar properties. 1st weave of thickness 0.75 mm ±5per cent and weighing 360 gsm ± 5per cent. Flame retardancy as per AS301.3-1999. Fabric protected by teflon fabric protector for water and stain resitance. Harmful substance standard Oeko-tex standard 100. Construction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill). Aluminium profile should have temper WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The tensile strength of profile should be 9.10 Kg/mm square and elongation 18.The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at right hand or left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds. Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-stable compounds available white.Approved make: deck, Hunter Douglas, d decor, Aerolux
129	Ply palmet work: Providing and fixing wooden pelmets of upto 150mm/200 mm x 150 to 300 mm L shape made of 19mm thick ply as per IS 710 and beading of 4mm thick and 25mm wide Ghana Teak wood for curtains/blinds/projection screen of openings. Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, nails, adhesives,necessary scaffolding, fixing at all heights and for all floors as per drawing and approved sample etc finish with veneer semi gloss PU finsh basic rate of veneer 80/-per sqft(Mode of Measurements: Only the palmet length shall be measured & paid for the items in which palmet work is not inclusive in item description)( At all floor)
130	blackout-\"Providing and fixing of roller blind of Deck make from Eco/Tuscany series having sturdy aluminium top tube of 38mm diameter, powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain. The roller blind fabric should possess the mentioned specifications with fabric made up of 85per cent polyester & 15per cent cationic polyester with openness factor - opaque, standard width - 280/300 cm, foam coated & color fastness - 4. Roller blinds with solar protection fabric of high tenacity polyester yarn & fungi static treatment and should block the light flux & offer elimination of glare and sunlight / heat radiance. Fabric shall have visible light & solar properties. 1st weave of thickness 0.76 mm ±5per cent and weighing 380gsm ± 5per cent. Flame retardancy as per AS301.3-1999. Fabric protected by teflon fabric protector for water and stain resitance. Harmful substance standard Oeko-tex standard 100. Constrruction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill). Aluminium profile should have temper WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The tensile strength of profile should be 9.10 Kg/mm square and elongation 18.The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at right hand or left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds. Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-stable compounds available white. Approved make: deck, Hunter Douglas, d decor, Aerolux
131	Providing & fixing of Deck Silent RTS Motor with mentioned specifications: (a) Nominal torque: 6 NM (b) Nominal speed: 28 RPM (c) Maximum length: 512 mm (d) Tube size: 40 mm (e) Rated power: 115 W (f) Rated current: 0.45 A (g) Noise level: < 40 DBA (h) IP Rating : 44 (i) Therminal cutoff: 4 Minutes (j) Motor stop limit: Electronic (k) RF frequency: 433.33 Ghz. Makes deck, Hunter Douglas, d decor, Aerolux
132	Providing & fixing of Deck 5 Channel Remote. The five-channel remote is for rooms with multiple windows. You can move up to five blinds or blinds individually. RF Remote range: 200 Meter in open area. Makes:deck, Hunter Douglas, d decor, Aerolux
133	Room Signages (Stainless Steel with single color/Multi color engravings). Providing and Fixing Room Signages for MD Cabin/ HR & Admin/ Conference room/Meeting Room/Cabin/Stationary/ Store room/Server / ups /electrical room/G.Toilet & Ladies Toilet with symbol/Pantry/Fire exist/rest room or for anyother area as per the direction of EIC.The SS plateshall be 304 grade 2 mm thick glossy matt finish of approved shape as per drawing.single color/Multi color engraved signage Font and letter sizing shall begotaproved by the architect-sampleshall be submitted. Rate shall include all hardware and necessary arrangementfor fixing.
134	BUILT IN /JOINERY & MISCELLANEOUS The dimensions of the furniture as given in the respective items as below are indicative and there shall be no deviation of cost on account of this. However the tolerance limit for such deviations in sizes shall be limited upto 10per cent of any measurment mentioned in the iteM Low height storage Cabinet (Veneer finished)-450mm deep x 750mm high:Storage to be formed of 18mm HDHMR Hard wood board and finished with 4mm thick approved shade of Veneer with adjustableshelves made of 18mm thick prelaminated HDHMR board with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details & architect approval. Shutters of cabinet to be formed of 18mm HDHMR Hard wood board finished with 4mm thk veneer on outer surfaces and 0.8mm thick approved shade of laminate inside. Rear backing of cabinet to be formed with 12mm HDHMR Hard wood board complete in all respect including 100mmhigh veneer finished skirting as per approval/details. Exposed wood veneer surfaces to be finished with spray applied melamine polish.Storage to be complete with hardware installed as per the appoved model/make & as directed to consist of the following: Shutter to have 2 nos of automatic spring loaded hinge of approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. EA set of shutters to be provided with 1no. multi purpose lock as specified, SS handles, auto bolt, etc. (Hettich/Hafele make) Basic price of Veneer @ Rs.685/ M2t+taxes (front area to be measured from bottom i/c height of leg/skirting to top of cabinet)
135	Full Height Storage (Laminate finish)-450 mm Deep: Providing and fixing full height storage cabinetformed of 18mm HDHMR Hard wood board formwork/carcass with adjustable shelves as per details.Shutter of storage cabinet to be formed of 19mm HDHMR Hard wood board finished with 1mm thick laminate of approved shade. All internal surfaces to be post laminated with 0.8mm thick HP laminate to approved shade. All external exposed surfaces to be finished with 1mm thick HP laminate to approved shade and all exposed edges to be finished with 2mm thick PVC edge band (factory finished) as per details. EA set of shutters to be provided with 1 no multi purpose lock as specified, 6mm thickSSD type handles, auto bolt as per details. Exposed wood surfaces to be finished with spray applied melamine polish (front area to be measured and paid for).Hardware: All hardware shall be as per the appoved model/make(Hettich/Hafele make)
136	PANTRY/ VENDING COUNTERCounter withstorage:Providing and fixing of counter with storage cabinet formed of 18mm HDHMR Hard wood board formwork/carcass/adjustable shelves/shutters with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details shown in drawing . Top of cabinet to be formed of 19mm thick HDHMR Hard wood board. The storage also to have drawer pedestals made of 18mm HDHMR Hard wood board with all exposed edges finished with 2mm thick PVC edge band (factory finished)as shown in drawing. Top of cabinet to be formed of 19mm thickHDHMR Hard wood board. Rear backing of cabinet to be formed with 12mm thick HDHMR Hard wood board. Counter top, facia and 200mm high partial splash board to be finished with Prepolished Granite Stone of approved shade & make as per details. All laminate shades to be of approved shade and colour. Cabinet to have concealed dustbin behind flap door formed of stainless steel in hairline finish as approved.All exposed wood surfaces to be finished with spray applied melamine polish.Also to provide skirting in laminate finish as per details. (Front area upto counter top to be measured and paid for). Storage to be complete with hardware installed as directed to consist of the following: Shutter to have 2 nos of automatic spring loaded hinge of approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. EA set of shutters to be provided with 1no. multi purpose lock as specified, SS handles, auto bolt, etc.Hardware: The storage to have all necessary hardware/ Locks/ Handles/ Hinges complete as per details drawing & shall be as per the approved model/make. (Hettich/Hafele make).Counter with storage of size 600mm (D) x 850mm (H)( approximately) with 19mm thick prepolished Granite stone (Basic price of Granite stone @ Rs.1600/ M2t + taxes)
137	Overhead Storage : 450mm(D) x600/800mm (H) or as approved by EIC. Providing and fixing overhead storage cabinetformed of 18mm HDHMR Hard wood board formwork/carcass/adjustable shelves/shutters with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details shown in drawing .Shutter of overhead cabinet to be formed of 18mm HDHMR Hard wood board with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details shown in drawing. Exposed wood surfaces to be finished with spray applied melamine polish. The storage to have all necessary hardware, locks, handle etc. complete as per details. (front area to be measured).Cabinet to have provision for concealedlighting with providing & fixingremovable cover made of 6mm thick milky white acrylic sheet fixed on 12x12x1.2mm Aluminium L-angle as indicated in the drawing and as per details.Storage to be complete with hardware installed as directed to consist of the following: Shutter to have 2 nos of automatic spring loaded hinge of approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. EA set of shutters to be provided with 1no. multi purpose lock as specified, SS handles, auto bolt, etc.Hardware: The storage to have all necessary hardware/ Locks/ Handles/ Hinges complete as per details drawing & shall be as per the approved model/make.
138	D.B.Shutter in laminate finish. Providing & fixing 675 mm deep DB storage with sides out of 19mm HDHMR Hard wood board finished in 1mm thk. laminate and louvers in teak wood with melamine polish as per instructions and designs of architects with all internal surfaces finished in french polish with all necessary hardware such as locks, handles, magnetic ballcatches etc. complete.
139	DIGITAL 2D/3D WALL PAPER : Providing & fixing 2d/3d digital printing printing on approved paper/canvas/fabric media as per suggested graphic work on suggested surface .Contractor shall provide graphic work detail & 5 M2m sample for approval the work shall be done inclusive of all rate with accesesories,tool tackel at allheight compelte.
140	Providing and fixing 100mm thick opaque partition upto ceiling height consisting offrame work in extruded aluminum sections1.6 mm thk , of approx size 50 x50 mm , placed at center to center at notmore than 600mm bothways, joined usingangle 35x35x 3 mm . Securly fixed to wall and , floor and ceiling complete in all respect . The rates shall be inclusive of cutting , punching of holes for drawings conduits and boxes for electrical works etc. Providing and fixing to aluminum frame workpartition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) board conforming to IS: 2095: (part 3) : 1996 (Board with BIS certification marks) fixed both side with fully threaded parallel shank screws at 200 to 300 mm centre to centre , on both sides offramework. Joints staggered on either sides of the partitions to avoid through joints complete . Providing and fixing infill of 50mm thick & min. 60 kg / m3 densityMineral Wool Insulation/Charcoal Soundproofing Foam Sheets.Mineral wool/Charcoal panel packed in polyweave packets inside partition frame work fixed to wall with Clip, screw, rawel plug & washers and held in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.
141	Providing and fixing Single layer of 12mm thick Bison Board as per details on single side of the existing aluminum partitions framework or Existing wall as per drawing details/site requirement shall be provided as per the direction of EIC.
142	Providing and fixing Single layer of 12mm thick MDF Ply as per details on single side of the existing aluminum partitions frameworkor Existing wall as per drawing details/site requirement shall be providedas per the direction of EIC.
143	LAMINATE PANELING. Supply and installation of approved shade laminate paneling over 12mm thk Marine -710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete.
144	VENEER PANELING. Supply and installation of approved shade Veener paneling over 8mm thk Marine -710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete.
145	FABRIC PANELING Supply and installation of 6m thick soft board panels with 6mm thick Marine 710 Ply Board with 6mm thick cross link foam and finished in fabric.The panels to be fitted to posts using galvanized steel brackets, ensuring a quick and simple installation or re configuration on site.
146	LAQUER GLASS PARTITION/PANELLING.Providing & Fixing oflacquer glass as per approval in any color fixed on existing ply/ MDF base with all other acessories as per architectural drawing. The Lacquered glass shall be highly durable, humid resistance, polyurethane lacquer glass. The glass to be manufactured by industrial curtain coating process. It should meet quality standards as per BS EN 1036 1999 & conform to persoz hardness test of at least 220 oscillations. The substrate of the glass should confirm to Standard BS EN 572 1995 parts 1 & 2. Lacquered glass to be manufactured to tight specifications, relating to consistency of color, opacity and homogeneity throughout production campaigns and also to the ageing properties, mechanical resistance, and resistance to humidity and to chemical agents of the lacquer. The color of the lacquer should remain stable when exposed to normal levels of ultra-violet light in interior applications
147	Providing ‘Unistone’ – or equivalent Wall Cladding Clay Tiles in size 230mm X 76mm X 15mm thick in approved natural clay shade or ‘Terracotta’ non-pigmented made from naturalclay. The appearance and shade of tiles should be natural terracotta having subtle variationin shade.The tiles would be made from special clay and firing temperature would be more than 11000Celsius. The allowed should be coated with Silicone and surface water absorption should not exceed 1per cent and byvariance in these tiles should not be more than ± 2.5 mm & top surfaceimmersion method it should be less than 8per cent..
148	Supply, installation testing and commissioning of vertical garden consisting of welded MS Structure, poly propylene green wall module with pots, Drip irrigation system and good-looking outdoor plants to create a natural vertical garden look. The MS structure for vertical garden of height8.00 meter shall be designed by the specialized agency to be enaged for the work of vertical garden. MS structure to be finished with two or more coat of epoxy paint of approved quality and shade over one coat of primer. Poly propylene green wall module of size approx. 170mm x 470mm shall be mounted over MS Structure with the support of fastener/screw /nut bolt etc as required. EA module shall contain three poly propylene pots of size approx 125mm x 125mM Drip Irrigation system consiting of LLDPE Drip tubing 16 mm OD, 3.0 Kg/cm² rating, 2 LPH emitters at approx 150 mm spacing including all fittings and cpvc pipes of suitable sizes for making connection with existing irrigation main line and shall be capable to supply water to individual potted plants. Plantation of different type of outdoor good looking plants to create a natural vertical garden look with light weight. EA pot shall contain soil mixture having cocopit, vermi compost, parlite, vermilite & good earth, suitable for plantation. Vertical garden shall be completed in all respect including temporary staging & bracing and removal of the same after completion of vertical garden and maintenance till the handing over to client, all complete as per direction of Engineer-In-Charge.
149	Fabrication, supply and Installation of New clear line glass railing system by Ozone made of Heavy duty aluminum U Type Hollow walls Base channel ( HWBC) (OZRF-NCLSYS- HWBC-AL) AL-6063 grade with mill finish of size 12.5mm( thick)72( wide)x122 mm( height). Glass Specs. is 16.89mm thk (8mm CT+ .89SGP+8MM CT) to be GRIPPED with fixing kit (OZRF-NCL-ACC-KIT-17MM) made of self-pushing clamps ( SPC) made by hardened aluminum -6063 grade EA at maximum 350mm cc to cc . glass should be lifted from base by Solid Nylon L Block separates at least 3 nos/ meters. HWBC to be fixed with M12 GI stud chemically grouted. Glass should be fixed with completely dry system so that in case of breakage it can be changed without any silicon cutting and very fast as well.. exposed edges of HWBC (if any) to be covered with SS 304 grade end caps. The Top Edge of glass will be covered with SS 304 grade Round slotted tube of Dia42x1.5 mm thk. fixed on the glass edge with EPDM gasket. The Vertical joint of glass will be free from silicon. The total height of the system will be max. 900 mm from ledge top, All top rail joints will be joined by using argon welding only.
150	LOGO (BUILDING) Supply Installation Testing & Commissioning ofLogo made in Acrylic Sheet with backlit strip LED light and including all fixing arrangement on wall approx size shall be 750 x450 as 2 axis of an ellipse. the font shall be approved by EIC and shop drawing for the logo shall be submitted for approval of EIC before execution.
151	GLASS GRAPHICS. Providing and fixing film etching with plotter cutting and application of 3MM/LUMAR/GARWARE make as per approved design on glass surfaces all complete as per instructions and patterns and design of the Architect.
152	Coriantop:-Providing&fixingcladdingwith\"Corian\" finish using Acrylic solid surface of 6 mm thickness on top of tables,faciastorageunits, columns , ledgesetcetc.wheredirected.Therateto includeall rubbing polishing materials,labour,transportation,wastagesetc. complete.
153	Wooden Panelling. PLY WALL PANELING FINISH WITHVENEER FINISH : Providing & fixing 12mm thickIS 710 ply fixed on frame work. Theframework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally. Theframe work shall be made from Aluminium section make JINDAL/HINDALCO conforming to IS specificationIn paneling, (intermediate, perimeter ) &(at vertical orhorizontaljoint of ply& at turning point )shall befixed to the wall/floor & ceilingwith Sheet metalscrews/Nylon grip screws of Corro-shield /Fischer and shall be supported by fillingrequired sizewedges/washers/ MS wall connectorsor packingsof teak wood/MSwashers to ensure right angles and plumblevel. All ply/wooden frameworks shall be treated with anti-termite treatment & hiddenThe framework shall be covered with approved makeplywood(IS 710- 12 mm ply),adhesive ,tape, headless nails etc ,finishedwithVeneer ( veneer base 4 mm thick Gurjan ply)with semiglossy. PU polish& in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as directed by EIC/Architect. The rate shall be in Sq.mt of actual paneling workfor all floors, at all heights, all shapes .Rate shallinclusive ofall material ,labor scaffolding, tools, tackles, for all heights and for all levels,Rates shallalso beinclusive ofcost ofmaking cut outs/ openingsforelectrical fixtures, tube lights /air-conditioners,grills, diffusers etc& providing additional sectionsfor strengthening around the openings/cutouts, makinggrooves between wall & board or as per drawing /instruction of EIC.andno extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation areashall be measured andpaid.
154	PRE LAMINATED HIGH GLOSS PANELING. Supply and installation of approved shade Pre Laminated High Gloss Sheet Paneling over 12mm thk Marine -710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete.
155	LEATHERITE PANELING. Supply and installation of approved shade Leather paneling over 12mm thk Marine -710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete.
156	Acoustical Wall Panels. Providing & fixing in position wall panelling at all heights of thickness 25 mm with Fiber Glass Acoustical Wall Panels of size 600X600 /600x1200 mm creda, resin bonded square edges having NRC of 0.9 minimuM The panels should be manufactured from high density bio-soluble resin bonded glass wool absorber having density of 96 Kgs/m3 and wrapped on the front side with an acoustically transparent fabric having option of colours and fabric options like jute etc. as per approved by architect/engineer-in-charge, plain tissue backer and fabric wrapped hardened edges. Panels should have humidity resistance up to 90 per cent, thermal conductivity = 0.03 (m² k / w) thermal resistance = 0.9 (m² k / w) & moisture rate = 1per cent (JC/T670 – 2005). The panel should be fully recycled and fire retardant as per Class A. The installation comprises surface impalers having projecting elements called spikes shall be fixed on the plain surface at 1200 mm center to center horizontally and 600 mm center to center vertically or as per approved by engineer-in-charge, using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Wall Panels shall be pierced through the spikes of the impalers ensuring line & level of panel are maintained. The panels should be mounted on the impalers horizontally or vertically as per the approved design or as per the directions of the engineer-in-charge.
157	Wooden sound slate Panelling. Providing and fixing in position wall paneling of grooved wood panels ESTO width 192mm, thickness of 16mm and length 2440 mm made up of high density fibre board with minimum density of 800 Kg/m3 substrate with a laminated facing as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 3 mm grooves at 21mm pitch. The panels shall be highly moisture resistant and have fire resistance of Class I,BS 476 part 7.The edges of the panels shall be “tongued-and-grooved” to receive special clips for installation. The back of the perforated panels shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick rock wool layer as directed by the Engineer-in-Charge. The panels shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install G.I stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall using screws at spacing of 600mm centre-to-centre. Screw the aluminum channel (keel) on channeled G.I stud 600mm centre to centre. Install the first set of wooden panels by inserting the clips. For border channel insert the groove of the panel in to the projecting flange of the clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channel into the next aluminum channel (keel) and simultaneously fill the gap between wall & panel with 50mm thick rock wool having density of 48 kg/m3. Continue the process till the actual height is achieved. Use clips for border channel to finish off the installation, finish the edges and joints using wood molding of matching color (to be provided by others) as approved by Engineer-in- Charge. The installed panels should give an NRC of 0.9.
158	Sub Head- Kitchen Accessories. Providing and fixing Utensil Kit of Godrej Make of size 600mm in 304 SS grade i/c a set of soft closing baskets 2 PlainSS wire baskets 150 mm with required SS screw for fixing above component of godrej make or quivalent,complete as per drawing in the exisitng space, sample prepared in sample flat at site and direction of Engineer-in-charge.
159	CONCRETE CLADDING. Providing and fixing CONCRETE CLADDING - DORIC SERIES 2700X900mm ROUGH FINISH using Litheoz concrete which is a fibre reinforced concrete technology and cast in panels using wet cladding using adhesiveof various sizes as directed, cleaning, finishing, curing etc complete as directed by Engineer In Charge. The compressive strenght to be between 100 to 120 Mpa and Flexural strenght to be between 12 to 15 MPa, The back of the panels should be primed with a priming liquid polymer before cladding. Apply the tile adhesive onto the wall and the panel and press the panel firmly onto the wall, he spacer gaps should be filled with superior quality tile grout / sealant. The tile edges needs to be masked by filling the space gaps. including necessasry hardware, scaffolding, finishing and cleaning etc.
160	Frosted sparkling glass film : Providing and fixing 3M Scotchcal Frosted Crystal or equivalent approved Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by manufacturer. Rate shall be inclusive plotter cutting design as per architect suggestion. Contractor shall provide shop drawing for approval of Architect.work complete incuding all type of tools, tackles, scaffolding etc complete as per suggestion of Architect/ EIC. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractorshall do a sample mock of 5 M2 minimum of glass film) ,shall be approved from EIC.( At all floor)
161	ACOUSTICAL SOUNDSCAPE PANEL. Providing and Fixing SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panelswith Humidity ResistanceRH 90per cent & Recycled Content of minimum 30per cent, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90per cent or in the color specified by the Architect / Engineer in charge (Ivory / Pale Green / Pastel Blue / Traffic Grey / Pale Brown). or in the color specified by the Architect / Engineer in charge . The size and sound absorption details are as :2.12 metric sabin.Shape- Circle ,Nominal Size- circular- of different diameters as below. The back of EA panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels.The panels to be suspended individually using the SoundScapes Deck hanging kit. EA kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable adjusters of 8.9mm outer diameter.EA panel to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket systeMThe height & level of the panels can be adjusted using the bottom end cable adjusters. Make : HunterDouglas, Amstrong, Dexune : 600 mm Haxagon Panel
162	Providing and fixing Golden Brass strips 0.5 to 12mm in joints of Floor & Wall Panelling Rate shall be inclusive fixing as per design and architect suggestion. Contractor shall provide shop drawing for approval of Architect.work complete incuding all type of tools, tackles, scaffolding etc complete
163	Vinyl Soft Board : Providing and fixing on wall 12mm thick approved quality Vinyl soft board printing of approved make and shade on 12mm thick IS 710ply with 19mm x 25 mm thick Ghana teakwood beading all around including semi glossy PU polish, as approved sample and as directed by Architect.The work shall be measured & paid in M2 for all floors, all level and at all heights including all costs (basic rateof Vinyl Soft Board shall be Rs. 260 per sqft.
164	3D PVC Wall Paneling : Providing & fixing 6 to 10mm thick 3D PVC Panel on fixed wall with suitable adhesive of approved Size & design as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge.
165	Supply Installation testing commisioning ofSleek System for Glass Partition(Fixed Glass Partition)-Demountable type. Supply & Insallation of aluminium profile with Clip- on / U-Section of size 30mm x 21mm (or as per standard manufacturers sizes as per list of makes) having section thickness of 2.5 mm in matt black/ natural Alu finish with suitable gaskets for insertion with 10mm thick clear toughened glass. Itconsists oftwo way Polycarbonate I profiles,90 Degree L Junction and T Junction profiles. Transparent profile to be applied on the glass shim for glass wall systems Supplied with double sided adhesive tape. Profile to be inserted in the joint instead of sealing to give continuity glas effect and suitable fasteners for fixing profiles. only the area below false ceiling shall be measured for purpose of payment.
166	Supply & Installation of Patch Fitting Door withGlass Door Package - With Lock SS, Glass dooralong withfloor spring complaint with ANSI A156.4includingBottom Patch,Top Patch,Corner lock andTop Pivot, with Pull Handle of size 300x22mm SS304 material with 10mmtoughened glass, Patch Fitting Glass Door size-900 MM x2400 MM
167	Supply & Installation of Patch Fitting Door withGlass Door Package - With Lock SS, Glass dooralong withfloor spring complaint with ANSI A156.4includingBottom Patch,Top Patch,Corner lock andTop Pivot, with Pull Handle of size 300x22mm SS304 material with 10mmtoughened glass, Patch Fitting Glass Door size-1050 MM x2400 MM
168	Providing and applying acrylicMicronised cement aggregate texturedextrerior / interior micronised cementish wall finish, walls with high qualitydecorative & resurfacing polymeric cement crushed aggregates texture of Microcem of Ultratech textures of equivalent as per sample approved by Engineer-in-charge on the exterior walls of the building. 1.The first coat shall be of low VOCAcrylicprimer mixed with water( Ratio 1:1)at the rate of 1.08- 1.20 ltr per 10 M22. Second basecoat or intermdiate coat of micronised cement texture : base [email protected] kg per 10 M2 asapproved shadeapplied with trowel& sanding with sandpaper of 100 & 150 no . 3. The finaltexture materialtop coat of Micronised cement exterior shall be applied at the rate of average 2.69- 2.89 kg / 10sq mt4. Final coat ofprotection coatofacrylicmaterial formulatedas proection for water base exterior texturesurface@ .72 lt/10 m2on top coat afte 48 hours of earlier application .Final average 600--700microns thickness on the exterior walls. Any Flaking,Gypsum or other absorbent material surfaces should be brushed and removed.All undulations, broken edges, irregularities should be rectified before application of the textured layer. The textured layer shall be applied in two layers, first with SS trowel and the second coat with also stainless steel trowel to achieve a uniform texture & Finishing walls with a clear coat that incorporate hitech-flurocarbon resin which act as protective shield against ultra violet rays , it will further enhance & protect allsurface coatingas recommended by the manufacturer and as per the direction of Engineer-in-charge. as per the approved sample complete to the satisfaction of Engineer-In-Charge upto all floor height levels as per drawings.
169	Supplying and applying Anticorrosive bituminous paint (black) on the existing RCC ceiling/wall surface at .24 litre/M2 The surface shall be preparedplain and smooth and then applying primer as per the standard application procedure. Scaffolding shall be deemed to inclusive in the quoted rate at any height and nothing extra shall be payable on this aacount.
170	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/M2 mixed with water proofing cement compound @ 0.253 kg/ M2 This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/M2 mixed with water proofing cement compound @ 0.126 kg/M2 This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
171	P/F 4mm thick Mirror glass mounted on wooden base mounted onMS hollow sections of 50X50MM SIZE with intermediate memebers running 600x600 grid network. The marine ply of 18mm thickness shall be mounted and fixed with necessary arrangement. All provisions shall be made for backlit light/cove light to be provided in the framework/borad/ply.
172	P/F feature wall consisting of panelling cut to shape out of MDF/WPC Board as per design attached herewith. panelling shall be done on a partition erected out of MS/Aluminum sections with intermediate support section(600x600mm) to achieve the desired thickness. The overall thickness shall be 300mm thick to include the provision of light at EA cutting step as per design and the base of EA shall be closed with a demountable acylic sheet of 8mm thickness. the surfaces shall be duly duco polished from all sides as per approved shade.
173	P/F feature wall consisting of panelling cut to shape out of MDF/WPC Board as per design attached herewith. panelling shall be done on a partition erected out of MS/Aluminum sections with intermediate support section(600x600mm) to achieve the desired thickness. the existing panelling shall be finished with engineered sandstone on one side and other side shall be duco polished toachieve the desired design as per drwing. The overall thickness shall be 150mm thick to include the provision of light at top and bottom to highlight the feature wall and shall be provided with LED Focus/strip light.
174	PLUMBING
175	ROOFING
176	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes160 mm diameter
177	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A,includingjointingwithsealringconformingtoIS: 5382, leaving 10 mm gap for thermal expansion. Single Push Fit Coupler 160 mm dia
178	Single tee without door 160x160x160 mm
179	Shoe (Plain) 160 mm dia
180	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 160 mm dia
181	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
182	SANITARY INSTALLATIONS
183	Providing and fixing white vitreouschina extended wall mountedwater closetof approved shape including providing and fixingof metropole flush valve dual flow 32mm size (concealed body) with exposed shut off provision & round flange (3.0/6.0 lts. per flushing),including sheet cover , and cistern fittings, nut bolt gasket,chair etc complete. ( MAKE-1: CERA, Cat. No. S1044150)
184	Providing and fixing white vitreous china sensor operated urinal having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. ( MAKE-1: CERA, Cat. No. A4010101)
185	Providing and fixing white vitreous china Oval shaped wash basin for top/under counter mounting with15 mm C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required. ( MAKE-1: CERA, CAT NO.S2020145 WASH BASIN : 480 x 400 x 150 mm & BASIN MIXER :F1012451 & WASTE COUPLING : F8050101. ) White Vitreous China Oval shaped Wash basin size 545 x 545 x 180mm with 15mm CP Brass single hole basin mixer
186	Providing , Fixing , Deck mounted sensor tap for tabletop washbasins with tap hole with flow volume of 3.8 l/min approx. with mains operation complete with all accessories as required and making good the walls wherever required. ( MAKE-1: CERA,MODEL NO. F6010103 )
187	Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting offittings and brackets,cuttingandmakinggoodthe walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
188	Providing and fixing hand shower (Health faucet)with 1.2mtr long Easy Flex Tube in chrome finish and wall hook.
189	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
190	Providing & fixing PVC waste pipe for sink including PVC waste fitting CompleteSemi rigid pipe 40mm Dia
191	Flexible Pipe 40mm Dia
192	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
193	Providing & fixing toilet paper holder C.P. brass
194	Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on EA side of the pipe.
195	Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)
196	Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)
197	Total bracket length 1040 mm of approved shape and design (for three 100 mm dia pipes)
198	Providing & fixing Nickel Chromium Platedliquid soap container/dispenser with metallic bottle of 51 mm dia & 122 mm height (Total height 162mm) of approved brand & make112 mm distance from wall of standard shape with bracket (Nickel chromium plating should pass Salt Spray Test for 200 hours) of the same materials with snap fittings of approved quality and colour, complete as per direction of Engineer in Charge. ( MAKE-1 : JAQUAR, MODEL NO. - ACN-CHR-1137N. MAKE-2 : PARRYWARE, MODEL NO. - T6706A1OR EQUIVALENT.
199	Providing, Fixing of SS 304 Towel Ring with fixing SS 304 screws complete as required. ( MAKE-1: CERA, MODEL NO. TOWEL RING : F5013115RG. )
200	Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted Coat hookon door complete.
201	Providingand fixing CP brass Angular stop cock with wall flange 15mm diafor health feset points.
202	Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of McAlpine, UK with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector.
203	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete as required.
204	Providing & fixing 100mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe.
205	Providing and fixing cast brass Floor cleanout plug with suitable insert keys for opening in brass cap, male threaded joint/reducer with G.I. socket caulked to Pipe/fittings of CI pipe including cost of lead joints etc. complete in all respect.100 mm dia
206	Providing and fixing GI inlet fitting with maximum 3 inlets 32,40 or 50 mm size fabricated from 100 dia GI pipes andsockets,fixed to C.I. trap with Drip Seal joint and set in cement concrete as per standard drawing complete as directed by Engineer-incharge.
207	Providing and fixing SS Grating of 125 mm dia of approved quality and colour complete as per direction of engineer in charge.Circular Type 125 mm nominal dia with 25 mm waste hole
208	WATER SUPPLY
209	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL
210	15 mm nominal outer dia Pipes
211	20 mm nominal outer dia Pipes
212	25 mm nominal outer dia Pipes
213	32 mm nominal outer dia Pipes
214	40 mm nominal outer dia Pipes
215	50 mm nominal outer dia Pipes
216	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
217	15 mm nominal outer dia Pipes
218	20 mm nominal outer dia Pipes
219	25 mm nominal outer dia Pipes
220	32 mm nominal outer dia Pipes
221	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on Wall
222	15 mm nominal bore
223	20 mm nominal bore
224	25 mm nominal bore
225	32 mm nominal bore
226	40 mm nominal bore
227	50 mm nominal bore
228	65 mm nominal bore
229	80 mm nominal bore
230	100 mm nominal bore
231	150 mm nominal bore
232	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
233	20 mm nominal bore
234	25mm nominal bore
235	Providing and fixing C.P. brass Short body bib cock of approved quality conforming to IS:8931 : 15mm nominal bore
236	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
237	Providingand fixingCP brass angle valve for basin mixture and geyser points of approvedqualityconfirming to IS: 8931.
238	Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 : Up to 300 mm dia
239	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
240	Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
241	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). 100 mm nominal bore
242	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 15mm nominal bore
243	Butterfly valve (manual) with C.I bodySS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore
244	80 mm dia.
245	100 mm dia.
246	Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.
247	65mm dia.
248	80 mm dia.
249	100 mm dia.
250	Providing & fixing CI `Y\" Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required.
251	65mm nominal bore
252	80mm nominal bore
253	Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 6 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box (upto 6 mt qty approx.) etc., complete.
254	25 mm dia
255	32 mm dia
256	40 mm dia
257	DRAINAGE
258	Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings(door or plain) viz elbolws, bends, tees, junctions, shoe bends, couplers, offsets, cowel etc. complete including jointing with solvent cement including GI supports,cutting and making good the walls wherever required. Nothing extra will be paid for supports.(Vertical Soil, waste, balcony waste & rain water pipes)
259	160 OD
260	110 OD
261	75 OD
262	Providing and Installing Grease Separator EasyClean ground Standard NS 2 Based on Euro-Norm EN 1825-1 Manufactured from Polyethylene. For underground installation, installation depth 550 - 950 mm, with integrated sludge trap, polymer upper section, vertically adjustable, rotatable and tiltable up to 5°, cast iron cover in load class B based on EN 124, odor tight. Ø 110 in- and outlet according to DIN 19534 Sludge trap capacity: 200 l Total separator capacity: 370 l Fat storage: 120 l Certification: Z-54.1-440 Weight: 120 kg Dimension: 1470 x 1300 mm Inspection chambers may be installed in a maximum of 500 mm groundwater.
263	FIRE FIGHTING WORKS
264	Supplying,installation,testingandcommissioningof Electric driven Main Fire Pump suitablefor automatic operationandconsistingoffollowing,completeinall respects, as required : (i) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (ii) Suitable HP Squirrel cage induction motor, TEFC, synchronousspeed1500RPM,suitableforoperation on415volts,3phase50Hz,ACsupplywithIP55 protectionforenclosure,horizontalfootmountedtype with Class-\"F\" insulation, conforming to IS-325. (iii) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (iv) Suitablecementconcretefoundationdulyplastered with anti vibration pads. Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. Make (PUMP)- Kirloskar/ Mather & Platt, Make (Motor)- ABB/ Kirloskar/ Siemens/ Crompton
265	2280 lpm at 100 m Head (For Hydrant Pump)
266	2280 lpm at 100 m Head (For Spinkler Pump)
267	Supplying,installation,testingandcommissioningof diesel engine driven main fire pump suitable for automatic operation and consistingof following, completeinallrespects including batteries and it\"s charger,asrequired:(DieselDriven Pump) (i) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (ii) SuitableHP,1500RPMwatercooledwithradiator, diesel engine conforming to relevant IS standard completewithautostartingmechanism,12/24volts electricstartingequipment,dieseltank,exhaustpipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (iii) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. (iv) Suitablecementconcretefoundationdulyplastered and with anti vibration pads. Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. Make (PUMP)- Kirloskar/ Mather & Platt Make (Engine)- Cummins 2280 lpm at 100m Head
268	Supplying,installation,testingandcommissioningof electricdrivenpressurisationpumpsuitablefor automaticoperationandconsistingoffollowing, complete in all respects, as required : (Jockey Pump) (i) Horizontaltype,multistage,centrifugalpumpofcast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. (ii) SuitableHPsquirellcageinductionmotorTEFCtype suitableforoperationon415volts,3phase 50Hz AC supply with IP 55 class of protection for enclosure, horizontalfootmountedtypewithClass-\"F\"insulation, conforming to IS : 325. (iii) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (iv) Suitablecementconcretefoundationdulyplastered and with anti vibration pads.Make (PUMP)- Kirloskar/ Mather & Platt, Make (Motor)- ABB/ Kirloskar/ Siemens/ Crompton180 lpm at 100 m Head
269	CONTROL PANELS Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,compartmentalisedwithhingedlockabledoors, dustandverminproof,powdercoatedofapproved shade after 7 tank treatment process, cable alley, inter-connectionwithsuitablesizecopperconductor cable/solidcopper strip, havingswitchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitableformainfirepump,pressurisationpump& dieselpumpsetcompleteasperCPWDspecification withfollowingincomingandOutgoings,suitablefor operationon415V,3phase,50HzAcSupplywith enclosure protection class IP 42 as required : (A) Incomings (i) 800A, 50kA4 Pole MCCB (ii) Ics=100% Icu Rating (iii) Digital Voltmeter 0-500V with selector switch (iv) Ammeter (0-630 A) with selector swtich & CTs etc.(v) LEDtypeRYBphaseindicatinglamps,ON,OFF,trip indicating lamps (vi) Set of CopperBus Bar 800Amps (B) Outgoings ( Note:Alloutgoingfeedersforpumpsshouldhave digital Ammeter with selector switches,and LED type ON, OFF, trip indicating lamps) (C) Main Fire Pump (i) 200Amp,50kATPNMCCB,Ics=100%Icu,withfully automaticStar/Deltastartersuitablefor100hppump withoverloadprotection,currentsensingtypesingle phasepreventorcompletewithallacceessoriesand internalwiringrequiredforautomaticoperation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets (D) Jockey Pump (i) 100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventorcompletewithallacceessoriesandinternal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.- 2 sets (E) DIESEL ENGINE CONTROL Control for diesel engine comprising - (i) Automatic/Manualselctorswitch&3attemptsstarting device,timersandrelaysasrequired,pushbuttons, start/stop in manual mode (ii) Indicatinglampforhigh/LowLub.Oilpressure,High Water Temp and Engine on indication (iii) Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter (iv) All standard relays and accessories for automatic operation of diesel engine. (F) System Controller (i) Designing,Supply,Installation,Testingand commissioning of system controllertocontrol operation ofmainelectricfirepump,dieselpump,Pressurization pump,Terracepumpinsequenceasperspecification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
270	Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
271	Providing and fixing angle SS (approx. 40mmx40mmx5mm) door frame and SS Grade-304 (approx 2mm thick) cum glass shutter of size approx. 1200mmx900mmx2100mm with approx. 25mmx25mmx3mm angle frame all around and stiffened in between i/c hinges(SS), handle, locking arrangement from outside and latches inside, Glass shall be properly fixed with good quality rubber biddingwithsign writing on glass at internal hydrant including providing & fixing S.S. sheet 2mm thick on remaining portion above door to close opening i/c painting etc. as required. Glass shall be 6 mm thick.
272	Providing and fixing stainless steel standard fireman\"s axe with heavy insulated rubber handle tested to 20000 volts with ISI mark as per IS : 926 complete.
273	PIPES & VALVES Providinglaying,testing&commissioningof\"C\"class heavydutyMSPipeconformingtoIS1239/3589i/c fittingslikeelbows,tees,flanges,tapers,nutsbolts, gasketsetc.ingroundincludingwelding,excavation& providingcementconcreteblocksassupports, anticorrosivetreatmentwithcoaltar/asphalttapeasper IS10221,refillingthetrenchetc.offollowingsizes complete as required. 150 mm. Dia
274	Supply, installation, testing & commissioning of Mild Steel pipe (IS:1239 Part-I) heavy class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanised MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work.Note :Pipes upto and 50 mm dia shall be threaded joints with UL FM approved Ductile Iron Threaded fittings, Make in India, above 50mm shall be Grooved fittings Ductile Iron, FM/ UL Approved, Make In India
275	150 mm dia.
276	100 mm dia.
277	80 mm dia.
278	65 mm dia.
279	50mmdia.
280	40 mm dia.
281	32 mm dia.
282	25 mm dia.
283	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI markedcompletewithnuts,bolts,washers,gaskets conforming to IS 13095 of following sizes as required :
284	150mm dia.
285	100mm dia.
286	80mm dia.
287	Providing,installation,testingandcommissioningof non-returnvalveoffollowingsizesconfirmingtoIS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
288	150 mm dia.
289	100 mm dia.
290	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
291	Providing,installation,testingandcommissioningof stainlesssteelY-strainerfabricatedoutof1.6mm thickstainlesssteel,Grade304,sheetwith3mmdia holes with stainless steel flange. 150 mm dia.
292	Providing & fixing of 25mm dia. gunmetal air release valve with all fittings and forged ball valve on header complete as required and as per enclosed specification.
293	Providing and fixing following size Pressure gauge (0-15 Kg/Cm2) complete with shut off valve duly calibrated before installation complete as required & as per enclosed specification. 150mm dia.
294	Providing, fixing, testing & commissioning of installationcontrolvalveofcastironbody, brass/bronzeworking partscomprisingofwater motor alarm,bronzeseatclapper,clapperarmand hydraulicallydrivenmechanicalgongbelltosound continuousalarmwhenthewetriser/sprinklersystem activates,pressuregauges,emergencyreleases, strainer,pressureswitch,cockvalvecompletewith drainvalveandbypass,testcontrolbox,ballvalves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150 mm dia.
295	Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valveontopandflangedconnectiontoriser,drain arrangementwith25mmdiagunmetalwheelvalve withrequiredaccessories,pressuregaugeand paintingwith synthetic enamel paint of approved shade as required.
296	Providing and fixing reinforced neoprene rubber vibration eliminators / expansion joints (to provide relief from stresses at pipe flanges) suitable for upto 20 kg/cm2 pressure, complete as perspecification. 150mm dia.
297	Providing, fixing, testing & commissioning of MS air cushion tank on top of EA riser fabricated from 6mm thick MS plate, 200 mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MSplate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and conforming to IS 4736-1968. (i) Recommended dia : 450 mm (ii) Height of shell : 2000mm (iii) Working pressure : 9 Kg/Sq.cm (iv) Test Pressure : 14 Kg/Sq.cm
298	Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
299	150 mm dia
300	100 mm dia
301	AUTOMATIC SPRINKLER SYSTEM Providing, fixing, testing & commissioning of 15mm dia quartzoidbulbtypesprinklersofrating68degree centigrade with required accessories :
302	Concealed head Sprinkler
303	Upright Sprinkler
304	Supplying, installation, testing & commissioning of sprinklerflexiblepipe(ULListed)ofstainlesssteel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875PSI(Burst)withbranchline(Inlet)25mmNPT malethreadtosprinklerhead(Outlet)15mmNPT femalethreadwithreducer,nipple,2sidebrackets, center bracket, stockbar of following sizes complete as required. 1000mm
305	Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
306	ELECTRICAL
307	DISTRIBUTION BOARD
308	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 12 way, Double door
309	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
310	8 way Double door
311	12 way Double door
312	Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
313	Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps
314	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
315	Supplying and fixing following rating, double pole, single phase and neutral, 240 volts, residual current circuit breaker ( RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc as required. 63 amps
316	INTERNAL WIRING
317	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group – C
318	Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the pointwith 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group – C
319	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
320	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
321	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
322	2 X 10 sq. mm + 1 X 6 sq. mm earth wire
323	2 X 16 sq. mm + 1 X 6 sq. mm earth wire
324	4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
325	4 x 10 sq.mm + 2 x 6sq.mm. earth wire
326	4 x 16 sq.mm + 2 x 6sq.mm. earth wire
327	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in residential buildings).
328	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
329	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton
330	Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton
331	Supplying and fixing of call bell / buzzer suitable for single phase,230 volt completeas required.
332	FANS & LIGHT FIXTURES:
333	SITC of recessedCOB down light with system power [12W ± 5per cent], should be available in 3000K/4000K/6000K color temperature, minimum dimesnion of module Ø85 x 104mm, Luminaire made of die-cast aluminium body and heat sink for better thermal management: Precision engineered high quality optics & electro plated reflector. operationalvoltage range should be of 90-265V, power factor > 0.9, THD < 10per cent, Inbuilt surge protection of 3 KV, Luminaire has Ingress protection of IP20, Dark light technology UGR <16, Adjustable upto 30° / Rotatable 355°,Easy maintenance without removing the frame from false ceiling, The luminaire should have minimum lumen outputof 950 lumens CRI of >80 . The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70B10 with SDCM<=3 binning Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5,IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drivers.
334	SITC of IP-40 rated 12W LED ceiling recessed back-lit panel light - Indoor luminaire with soft uniform Light distribution. Luminaire should be made of die-cast aluminium for better thermal management. High efficiency diffuser for glare free, uniform light distribution. CRI (Ra) : >80, SDCM= 3 to avoid color deviation , Led life should be atleast L70B10 50,000hrsHigh lumen output (Delivered) of at least 100lm/w.High PF constant current LED driver with surge and thermal protection with follwoing ratings Power Supply : Integrated Power Factor : >0.90 THD : <20per cent Surge Protection : 2.5KV Efficiency : >83per cent.Suitable for operation on 240V, 50Hz single phase ac supply, Operating Voltage : 90-265Vac Operating Temperature : -15°~+50°C.CE,BIS.
335	SITC of IP-40 rated 18W LED ceiling recessed back-lit panel light - Indoor luminaire with soft uniform Light distribution. Luminaire should be made of die-cast aluminium for better thermal management. High efficiency diffuser for glare free, uniform light distribution. CRI (Ra) : >80, SDCM= 3 to avoid color deviation , Led life should be atleast L70B10 50,000hrsHigh lumen output (Delivered) of at least 100lm/w.High PF constant current LED driver with surge and thermal protection with follwoing ratings Power Supply : Integrated Power Factor : >0.90 THD : <20per cent Surge Protection : 2.5KV Efficiency : >83per cent.Suitable for operation on 240V, 50Hz single phase ac supply, Operating Voltage : 90-265Vac Operating Temperature : -15°~+50°C.CE,BIS.
336	SITC of 4ft Linear Traiangular shaped up and down Suspended diffused LED luminaire with system power 40W & 10Wdimension should not be more than 1200 x 60 x 56 mm should be available in 3000K/4000K/6000K color temperature operational voltage range of 90-265V, power factor > 0.9, THD < 10per cent, Inbuilt surge protection of 3 KV, Luminaire has Ingress protection of IP20 The luminaire should have minimum lumen outputof 3500 lumens , CRI of >80 . The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70B10 with SDCM<=3 binning Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5,IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drivers
337	SITC of 6ft Linear Traiangular shaped up and down Suspended diffused LED luminaire with system power 50W & 15Wdimension should not be more than 1800 x 60 x 56 mm should be available in 3000K/4000K/6000K color temperature operational voltage range of 90-265V, power factor > 0.9, THD < 10per cent, Inbuilt surge protection of 3 KV, Luminaire has Ingress protection of IP20 The luminaire should have minimum lumen outputof 4800 lumens , CRI of >80 . The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70B10 with SDCM<=3 binning Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5,IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drivers
338	SITC of 8ft Linear Traiangular shaped up and down Suspended diffused LED luminaire with system power 60W & 20Wdimension should not be more than 2400 x 60 x 56 mm should be available in 3000K/4000K/6000K color temperature operational voltage range of 90-265V, power factor > 0.9, THD < 10per cent, Inbuilt surge protection of 3 KV, Luminaire has Ingress protection of IP20 The luminaire should have minimum lumen outputof 6000 lumens , CRI of >80 . The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70B10 with SDCM<=3 binning Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5,IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drivers
339	SITC of IP-40 rated 16W LED ceiling square surface mounted back-lit Indoor luminaire with soft uniform Light distribution. Luminaire should be made of die-cast aluminium for better thermal management. High efficiency diffuser for glare free, uniform light distribution. CRI (Ra) : >80, SDCM= 3 to avoid color deviation , Led life should be atleast L70B10 50,000hrsHigh lumen output (Delivered) of at least 90lm/w.High PF constant current LED driver with surge and thermal protection with follwoing ratings Power Supply : Integrated Power Factor : >0.90 THD : <10per cent Surge Protection : 2.5KV Efficiency : >83per cent.Suitable for operation on 240V, 50Hz single phase ac supply, Operating Voltage : 90-265Vac Operating Temperature : -15°~+50°C CE,BIS.
340	SITC of Wall Maounted LED fixture with system power [12W± 5per cent] should be available in 3000K/4000K/6000K color temperature, minimum dimesnion 226 x 94 x 108mm,should be made up Luminaire made of extruded aluminium with fabricated aluminium frame, Extruded aluminium housing profile designed to throw upward and downward lighting, UGR<19, operational voltage range of 90-265V, power factor > 0.9, THD < 10per cent, Inbuilt surge protection of 3 KV, Luminaire has Ingress protection of IP20. The luminaire should have minimum lumen outputof 1000 lumens , CRI of >80 .The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70B10 with SDCM<=3 binning Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drivers.
341	Supply, Installation, assembling, connection, testing & commissioningof LED fixture with system power [6W± 5per cent] should be available in 3000K surface mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 5W to 7W at steady state full intensity luminaire should have minimum luminous flux of 900 Lm. Color rendering index CRI = 80 and power factor of complete luminaire = 0.90, at white colour.Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI)>80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, C3050Hz single phase ac supply. Luminaire dimension : 113mm length x 73 mm Dia x 330mm height.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10per cent-90per cent. THD should be less than 10per cent.. TLuminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5,IES, LM 79, LM 80, & TTC certificates should be provided from in house/ 3rd party NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS.
342	Supply, Installation, Testing and Commissioningof IP-65 rated 12W bulk head, Luminaire should be made of die cast aluminium with non corrosive SS fasteners.IK-08 Non yellowing UV stabilized translucent polycarbonate diffuser for glare free, uniform light distribution.Silicone gasket. Integral constant current power supply.CRI (Ra) : >80.Power Supply : Integral Power Factor : >0.95 THD : <10per cent Surge Protection : 2.5KV Efficiency : >85per cent. Frequency : 50-60Hz, Operating Voltage : 100-277Vac, Opaerating Temperature : -15°C~+50°C. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5,IES, LM 79, LM 80, & TTC certificates will be provided from in house NABL accredited lab. Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drivers
343	SITC ofround SuspendedLED luminaire should bemade of spun aluminium with system power 36W, Diffuser placed into the provision formed on the pheriphery of the bottom cover, dimension should not be more thanØ420 x 80 mm should be available in 3000K/4000K/6000K color temperature operational voltage range of 90-265V, power factor > 0.9, THD < 10per cent, Inbuilt surge protection of 4 KV, Luminaire has Ingress protection of IP50 The luminaire should have minimum lumen outputof 3000 lumens , CRI of >80 . The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70B10 with SDCM<=3 binning Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5,IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Operating Temperature : -15°C~+50°C, Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drivers.
344	SITC Fresh air exaust fan 300 mm
345	SITC of 60w wall fan
346	Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
347	Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor with day light dimming(lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high preformance, regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
348	ELECTRICAL PANEL
349	FLOOR PANEL: INCOMER. 1 No. 160amps 4P MCCB(16KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge suppression device suitable for 3 phases as per specifications. METERING & INDICATION for EA Incomer 1 set of R,Y,B phase indicating lamps. Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order & per centTHD) with RS-485 Port. Sets of 160/5A, CL-1, 15VA CTs for measuring. Sets of phase indicating lamp with 2A control MCBs. BUS-BAR. 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS: 23 Nos. 63 Amp TPN MCB, 4 Nos. 40 Amp DP MCB. Building panel as described above
350	LIGHTNING PROTECTION SYSTEM
351	Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, copper tube, having single prong at top, with 85mm dia 6 mm thick copper base plate including holes etc. complete as required.
352	Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
353	Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required. (for horizontal run).
354	Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required. (For vertical run.)
355	Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long with 4 Nos. of G.I. bolts, nuts, check nuts and spring washers etc. complete as required.
356	Providing and laying G.I. tape, 32mm x 6mm thick, from earth electrode directly in ground as required.
357	CABLE & END TERMINATIONS
358	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
359	Upto 35 sq. mm
360	Above 35 sq. mm and upto 95 sq. mm
361	Above 95 sq. mm and upto 185 sq. mm
362	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
363	Upto 35 sq. mm
364	Above 35 sq. mm and upto 95 sq. mm
365	Above 95 sq. mm and upto 185 sq. mm
366	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
367	Upto 35 sq. mm
368	Above 35 sq. mm and upto 95 sq. mm
369	Above 95 sq. mm and upto 185 sq. mm
370	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
371	Upto 35 sq. mm (clamped with 1mm thick saddle)
372	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
373	Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
374	Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
375	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
376	3½ X 50 sq. mm (35mm)
377	3½ X 150 sq. mm (50mm)
378	4 X 10 sq. mm (25mm)
379	4 X 16 sq. mm (28mm)
380	4 X 25 sq. mm (28mm)
381	Supply of MV cable: Supply,following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor power/ multicore control armoured cable of 1.1 KV grade.
382	3 ½ C - 150 sq mm Aluminium
383	3 ½ C - 50 sq mm Aluminium
384	4C- 25 sq mm copper
385	4C- 16 sq mm copper
386	4C- 10 sq mm copper
387	2C- 6 sq mm copper
388	EARTHING
389	Earthing with G.I. earth pipe 4.5 M long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
390	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 M long etc. with charcoal/ coke and salt as required.
391	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 M long etc. with charcoal/ coke and salt as required.
392	Supplying and laying 6 SWG G.I. wire at 0.50 M below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
393	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe FRLSom earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
394	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
395	Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
396	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
397	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
398	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
399	RACEWAYS AND CABLE TRAY
400	Metal Raceways : Floors Supply and fixing in position of following size of under floor GI raceways [consists of body & cover] for distributing cabling in screed floor installations. Raceway should be made up of Pre galvanized sheet conforming to IS 277with thickness of 1.6mm consists of Body and Openable cover with 275 GSM coating. Raceway should be supplied with required accessories such as fixing brackets and coupling plates as required. Raceway should be confirmed with the standard EN 60-670 and EN 50085-2-2, IP 20 & IK08 in recess / on surface including chasing the wall/floor complete as required of following configurations:
401	300 x 38 mm Raceway with 3 compartments.
402	225 x 38 mm Raceway with 3 compartments.
403	150 x 38 mm Raceway with 1 compartments
404	100 x 38 mm Raceway with 1 compartments.
405	75 x 38 mm Raceway with 1 compartments
406	Metal Junction Box : Floors Supply and fixing in position height adjustable under floor crossover Junction box for Raceways for direct access to cables at the intersection of Raceways supplied completely with base and cover plate [lid]. Junction box should be made of Pre galvanized sheet consist of body and cover. Height of the junction box should be adjustable from minimum 65mm. Junction box should be supplied with the metal cover for protecting the junction box during constructions at site. It should be confirmed with the standard EN 50085-2-2 including all accessories complete as required of following sizes:
407	Sizes: Box : 400 x 400 x 65-90mm [1mm base & 3mm lid]Cover Plate : 400 x 400mm
408	Sizes: Box : 300 x 300 x 65-90mm [1mm base & 3mm lid]Cover Plate : 300 x 300mm
409	Sizes: Box : 225 x 225 x 65-90mm [1mm base & 3mm lid]Cover Plate : 225 x 225mm
410	Sizes: Box : 150 x 150 x 65-90mm [1mm base & 3mm lid] Cover Plate : 150 x 150mm
411	Cable Tray: Supplying and installing following size of perforated pre-painted M.S cable trays with perforation not more than 17.5per cent, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts&nuts, painting suspenders etc as required.
412	100 mm width X 50 mm depth X 1.6mm thickness
413	150 mm width X 50 mm depth X 1.6mm thickness
414	300 mm width X 50 mm depth X 1.6mm thickness
415	450 mm width X 50 mm depth X 2.0 mm thickness
416	Supplying and installing following size of perforated pre-painted M.S cable trays bends with perforation not more than 17.5per cent, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts&nuts, painting suspenders etc as required.
417	100 mm width X 50 mm depth X 1.6mm thickness
418	150 mm width X 50 mm depth X 1.6mm thickness
419	300 mm width X 50 mm depth X 1.6mm thickness
420	450 mm width X 50 mm depth X 2.0 mm thickness
421	Supplying and installing following size of perforated pre-painted M.S cable trays reducers with perforation not more than 17.5per cent, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts&nuts, painting suspenders etc as required.
422	100 mm width X 50 mm depth X 1.6mm thickness
423	150 mm width X 50 mm depth X 1.6mm thickness
424	300 mm width X 50 mm depth X 1.6mm thickness
425	450 mm width X 50 mm depth X 2.0 mm thickness
426	Supplying and installing following size of perforated pre-painted M.S cable trays Tee\"s with perforation not more than 17.5per cent, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts&nuts, painting suspenders etc as required.
427	100 mm width X 50 mm depth X 1.6mm thickness
428	150 mm width X 50 mm depth X 1.6mm thickness
429	300 mm width X 50 mm depth X 1.6mm thickness
430	450 mm width X 50 mm depth X 2.0 mm thickness
431	Supplying and installing following size of perforated pre-painted M.S cable trays Cross members with perforation not more than 17.5per cent, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts&nuts, painting suspenders etc as required.
432	100 mm width X 50 mm depth X 1.6mm thickness
433	150 mm width X 50 mm depth X 1.6mm thickness
434	300 mm width X 50 mm depth X 1.6mm thickness
435	450 mm width X 50 mm depth X 2.0 mm thickness
436	LOW VOLTAGE
437	CCTV
438	Supplying, Installation, Testing & Commissioning of 8port 10/100/1000 BASE-T PoE/PoE+ports and two 1GbE SFP uplink ports layer3 and layer2 from day1 having static & RIP , should support at least 8 switches stack, should support redundant power supply and fan , 3 Year OEM On site NBD warranty. Please refer tender for detailed Tech Specifications.Make: Juniper/ Cisco/ Netgear
439	WIFI
440	Supply, installation, testing & commissioning of dual band 802.11abgn/ac Wireless Access Point, must include radios for 2.4 GHz and 5 GHz with 802.11ac Wave 2 and WiFi6., 2x2:2 streams, 1 ports, 802.3af PoE support.Does not include power adapter or PoE injector.should Includes Limited Lifetime Warranty and Mounting Kit complete in all respect. Make-Cisco/Ruckus/Cambium
441	Supply, installation, testing & commissioning of Wi-Fi Controllerwith 4 Gig Ports, with 100 APs license, Power Supply and HA mode alongwith 3 year support. Make-Cisco/Ruckus/Cambium
442	AV FOR ED ROOM
443	Supply, Installation, testing and commissioning of of Cable cubby Managerwith 1 no. multiregion AC Power socket, 1x USB power, Black anodised /brushed aluminium finish,Tilt up lid/pullup cable with pass through holes for 1HDMI,1VGAwithaudio,1x LAN complete etc. as required.Make-Crestron/Satellier/RG Spectrum/Kramer
444	CONFERENCE ROOM
445	Supply, Installation, testing and commissioning of of Cable cubby Managerwith 1 no. multiregion AC Power socket, 1x USB power, Black anodised /brushedaluminiumfinish,Tilt up lid/pull up cable with pass through holes for 1HDMI,1VGAwithaudio,1x LANcomplete etc. as required.Make-Crestron/Satellier/RG Spectrum
446	Supply Installation Testing & Commissioning of Wireless presentation device which supports video resolution upto 1080p (Full HD},with lxHDMI I DVI/ DP output, PoE enabledEthernet port,lxUSB port for datasharing,SupportsWindows laptopsandMAC as well as iOS systems, Windows end Androidmobile operating systems display minimum 2 users screen simultaneously on a singledisplay throughhardwaredongle/software app. Supports DHCP,Audioout.zupport 40 or more concurrent users. Support FullHDvideo of1080p @ 30fps or more etc as required at site. Makes:- AMX/ BARCO/ Crestron/Kramer
447	DATA AND TELECOM
448	Supply, Installation, testing and commissioning of Cat6A RJ45 keystone Information outlet for Data & Voice. Cat6 with a 180 termination design, wiring diagram and conductor protection cap. RJ45 Information outlet with insertion cycle (in & out) should be = 750 times (I/O) . 200 Termination cycle for the IDC Life. The Information Outlet connector shall 0.35 mm Phosphor bronze gold over nickel plating .The connectors shall be UL Listed,ETL 04-Connector Channel Verified and RoHS 3 compliant. Make-3C3/Siemon/Panduit/Legrand/Belden
449	SITC of Single port shuttered Face Plate : High Impact Polycarbonate ,Built-in Dust Covers. The face plate should be compatible for Cat5e, Cat6/6A range of RJ45 and AV connectors.The face plate Size should be of minimum 86x86mm. UL 94V-0 and RoHS 3 Compliant Make-3C3/Siemon/Panduit/Legrand/Belden
450	SITC of Dual port shuttered Face Plate : High Impact Polycarbonate ,Built-in Dust Covers. The face plate should be compatible for Cat5e, Cat6/6A range of RJ45 and AV connectors.The face plate Size should be of minimum 86x86mm. UL 94V-0 and RoHS 3 Compliant Make-3C3/Siemon/Panduit/Legrand/Belden
451	Supply, Installation, testing and commissioning of 24 port Cat 6A 19\" Modular Staggered Patch Panel (loaded) enable all possible combinations of the various types of cable. mounted on the same panel by using various toolless connector blocks/modules. Have a metal structure enabling them to be durably fixed to the uprights of the 19” chassis and assuring automatic grounding between toolless RJ-45 connectors, the panel, and the 19” uprights of the enclosure. Include rear cable support with plastic cable guides to hold cable without need for cable ties. Include quick mounting system to mount the panel into the 19” rails Cat6 RJ45 keystone Information outlet for Data & Voice. Cat6 with a 180 termination design, wiring diagram and conductor protection cap. RJ45 Information outlet with insertion cycle (in & out) should be = 750 times (I/O) . 200 Termination cycle for the IDC Life. The Information Outlet connector shall 0.35 mm Phosphor bronze gold over nickel plating.The panel shall be UL Listed, ETL 04-Connector Channel Verified, RoHS 3 compliant and compliant as per ASTM B117: 2019. Make-3C3/Siemon/Panduit/Legrand
452	Supply and drawing of 4 pair 23 AWG CAT 6A U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required conforming to the following standards like ANSI/TIA 568.2-D, IEC 60332-1, IEC 60754-1. Cable Dia 5.9 ± 0.3 mm with beneding radius - 4 X Cable Diameter Operates at tested upto a frequency of 635 or above Mhz. The cable shall be UL Listed, 04-Connector ETL Verified and RoHS 3 compliant. Make-3C3/Siemon/Panduit/Legrand
453	Supply, Installation, testing and commissioning of CAT 6A U/UTP 24 AWG Patch Cord - 1 mtr, Manufactured from high quality stranded wires for longer flex-life having a soft latch-cover design for easy depression,Minimum length of 1m, and maximum length of 5mConforming to the following standards like ANSI/TIA 568.2-D & ISO/IEC 11801, IEC 60332-1, IEC 61156-6 and IEC 61034 . The cable shall be UL Listed, ETL 04-Connector Channel Verified and RoHS 3 compliant. Make-3C3/Siemon/Panduit/Legrand/Belden
454	Supply, Installation, testing and commissioning of CAT 6A U/UTP 24 AWG Patch Cord - 2 mtr, Manufactured from high quality stranded wires for longer flex-life having a soft latch-cover design for easy depression,Minimum length of 1m, and maximum length of 5mConforming to the following standards like ANSI/TIA 568.2-D & ISO/IEC 11801, IEC 60332-1, IEC 61156-6 and IEC 61034 . The cable shall be UL Listed, ETL 04-Connector Channel Verified and RoHS 3 compliant.Make-3C3/Siemon/Panduit/Legrand/Belden
455	Supplying & Fixing of Fiber Panel Sliding 2-Cutout Type, Loaded with 01 Nos. of 6LC Duplex (OM3) Adapter Plate Loaded and 01 Nos of Blank Plate, 12 Nos of LCU Pigtails (OM3) should comply to G.657.A1, Splice Tray & Fiber Management Kit, 1Uwith all accessories complete in all respect. Make-3C3/Siemon/Panduit/Legrand/Belden
456	Supplying & Fixing of Fiber Optic Patch Cable (LC-LC), 3 Mtrs. Long, ISO/IEC-11801-OM3 50µ Duplex, LSZH,All patch cords shall conform to ANSI/TIA-568.3-D and ISO/IEC-11801,Shall have a protective layer of spiral belt is adopted, which has excellent side pressure resistance, flexibility and bending performance. Shall be Duplex Multi Mode Fiber Optic Patch Cords OM3 50µ, Tensile load should be 600 Newton or higher and crush resistance should be 3000 Newton or higherand a Durability of = 0.2 db (1000 Mating) , Shallsupport network line speeds up to 10 Gbps.Shall have LC-LC Connector connectors atthe ends complete in all respect. Make-3C3/Siemon/Panduit/Legrand/Belden
457	Supply & Fixing of OM3 50/125µ Type Pigtails of ISO/IEC-11801-OM3 Pigtails with LC Type Connectors,pigtails for terminating fibers on the FOPP complete in all respect. Make-3C3/Siemon/Panduit/Legrand
458	Supplying, Installation, Testing & Commissioning of50µ, 6-core Multi mode OM3ECCS Tape armored, Fiber cable as per ANSI/TIA 568.3-D, Telecordia GR-20 and ISO/IEC-11801, Shall be able to meet Gigabit & 10 Gigabit Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) & IEEE 802.3ae (10G Base-X) Tensile load should be 3000 Newton or higher and crush resistance should be 3000 Newton or higher ,The attenuation @ 850 nm should be = 2.5 (Max) db/Km and @ 1300 nm should be = 0.8 (Max) dB/Km, the fiber construction can be unitube or multitube, but tensile and crush resistance parameters should be matched, the jacket shall be LSZH complete in all respect. Make-3C3/Siemon/Panduit/Legrand/Belden
459	Supplying Installation testing and Commissioning of Small Form Factor Pluggable 10 Gigabit Ethernet (SFP+) SR Optics. Make: Juniper/Cisco/Netgear
460	Supplying Installation testing and Commissioning of Small Form Factor Pluggable 1 Gigabit Ethernet (SFP) SR Optics. Make: Juniper/Cisco/Netgear
461	Supplying, Installation, Testing & Commissioning of 48port 10/100/1000 BASE-T PoE/PoE+ports and four GbE/10GbE SFP/SFP+ uplink ports layer3 and layer 3 from day1 having static & RIP , should support stacking port, should support redundant power supply and fan , 3 Year OEM On site NBD warranty. Please refer tender for detailed Tech Specifications.Make: Juniper/Cisco/Netgear
462	Supplying, Installation, Testing & Commissioning of 48port 10/100/1000 BASE-T PoE/PoE+ports and four GbE/10GbE SFP/SFP+ uplink ports layer3 and layer 2 from day1 having static & RIP , should support with stacking port, should support redundant power supply and fan , 3 Year OEM On site NBD warranty. Please refer tender for detailed Tech Specifications.Make: Juniper/Cisco/Netgear
463	Supplying Installation testing and Commissioning of 24 Port Fiber Switch10/100/1000BASE-T ports, Switch should support stacking bandwidth of minimum 160gbps, Modular operating system, 20 1 Gig SFP port with additional 4 no. of 10g SFP+ PORT, power supply, layer3 switch, EA switch should be provided with stacking port/cable complete in all respect. Make: Juniper/Cisco/Netgear
464	Supplying & Fixing of 42U / 800w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 24U/800d Front MS Door perforated honeycomb 24U/600w Rear MS Door (Fully Perforated - Mesh) 24U/600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 24U complete in all respect. Make:- APC/APW/ VALRACK
465	Supplying & Fixing of Floor StandingNetwork/Server Rack - 42U / 800w / 800d,with Heavy Duty Extruded Aluminium Frame for rigidity.Top cover with FHU provision. Top & Bottom cover withcable entry gland plates.Two pairs of 19” mountingangles with ‘U’ marking. Depth support channels - 3 pairs.With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 42U/800dFront MS Door Perforated honeycomb 42U/800wRear MS Door Split Perforated honeycomb 42U/800wFan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Vertical Cable manager 80mmW 42UShelf, Stationery 700mm N/WPDU 12Sockets 5/15Amps with MCB Mounting Hardware (Pkt. Of 20) earthing Kit 150mmH Cable manager 1U MS with Loops complete in all respect. Make:- APC/APW/ VALRACK
466	ACCESS CONTROL SYSTEM
467	Supply, Installation, testing and commissioning of Surface mounted Networkable multiprocessor controlled 4 reader controller capable of controlling multiple readers (IN/OUT) alongwith TCP/IP connectivity complete as per specifications. Control panel housed in MS Powder Coated Cabinet with Tamper Switch, Complete with power supply unitfor Controllers & Magnetic Locks as per specification Make-DDS/SoftwareHouse/Continuum/tyco
468	Supply, installation, testing and commissioning of UL Listed Smart Card Reader with compatible support of weigand output, 13.56 MHz technology platform and complies with the ISO 15693 / 14443A standard for contact less smart card technology. Card reader must be configurable to read encrypted ISO14443A sectors using standard or custom read keys for Sign OUT Terminal. should be compatible with HID format cards. Make-HID
469	Supply, testing and commissioning of Exit Push Butto Make:-Bel/Ncom/Algatech
470	Supply, installation, testing and commissioning of Double Leaf Electro Magnetic Lock of Suitable Capacity(Min 1200 lbs). Make-Bel/Ncom/Algatech
471	Supply and Fixing of\"\"U/L\"\" Bracket with Accessories.Make-Bel/Ncom/Algatech
472	Supply and Fixing ofDoor Positioning sensor with Accessories.Make-Bel/Algatech/Honeywell
473	Supply, Fixing and Layingof8 Coremulti strand, copper, unarmouredCable (between the everyreaders & the access controllers). Make-Vimco/Finolex/Polycab
474	Supply, Fixing and Laying of 2 Core x 1.5 Sq mm, multi strand, copper, unarmoured cable (between the controller and EM Lock/Request to exit button). Make-Vimco/Finolex/Polycab
475	FIRE ALARM AND PUBLIC ACCESS SYSTEM
476	Supply,Installation,Testing&CommissioningofEN-54Compliant,Vds&FMapproved, Intelligent Analog Addressable multisensor Detectorand integral response indicator with 360 degree viewing angle. Detector shall communicate 3 danger levels for differentiated alarm activation and high tolerance to dust,dirt, temperature fluctuations and air currents. Detector should have unique address for communication and assigned through panel with Mounting Base as required with the protection category of IP40. Make:- Honeywell/ Siemens/ Eaton Cooper/ Schneider/Notifier
477	Supply, Installation, Testing and Commissioning of Intelligent Addressable Manual call point with inbuilt turbo Isolator suitable for flush or surface mounting, call point shall include test key feature without removing the glass. Also should have protection category of IP44and extra acceesories as required, duly approved by EN54,LPCB,VDS & FM Make:- Honeywell/ Siemens/ Eaton Cooper/ Schneider/Notifier
478	Supply,Installation,Testing&CommissioningofEN-54Compliant,Vds&FMapproved, addressable Control Module with inbuilt Turbo Isolator. The module shall have LED indication for Normal, Fault, Test & Alarm activation. The Module shall be quoted with required junction box and mounting accessories. The module shall have IP40 protection. Make:- Honeywell/ Siemens/ Eaton Cooper/ Schneider/Notifier
479	Supply,Installation,Testing&CommissioningofEN-54Compliant,Vds&FMapproved, Addressable, Loop Powered, Sounder cum Strobe . The Sounder cum Strobe shall have 11 selectable tones, 3 Volume Settings selectable from the Control Panel.TheSounder&Strobeshallbeindependentlyprogrammable.TheSoundercum Strobe shall be quoted with required junction box and mounting accessories. Make:- Honeywell/ Siemens/ Eaton Cooper/ Schneider/Notifier
480	Supply,Installation,Testing&CommissioningofEN-54Compliant,Vds&FMapproved, Intelligent Analog Addressable Duct Detectorand integral response indicator with 360 degree viewing angle. Detector shall communicate 3 danger levels for differentiated alarm activation and high tolerance to dust,dirt, temperature fluctuations and air currents. Detector should have unque address for communication and assigned through panel with Mounting Base as required with the protection category of IP40.Make:- Honeywell/ Siemens/ Eaton Cooper/ Schneider/Notifier
481	Supply,Installation,Testing&CommissioningofEN-54Compliant,Vds&FMapproved, addressable Relay Module The module shall have LED indication for Normal, Fault, Test & Alarm activation. The Module shall be quoted with required junction box and mounting accessories. The module shall have IP40 protection. Make:- Honeywell/ Siemens/ Eaton Cooper/ Schneider/Notifier
482	SITC of 6W recessed ceiling speaker with feathures: Speaker drive 6\", complete aluminium grill and metal baffle line matching transformer 100x70 V line. Variable wattage tappings of 6/3/1.5, effective frequency range 110/ 15 KHz(BS 6840), SPL @ 1m/1w=91dB, peak spl 97dB. Complete with necessary mounting hardware and accessories. Make-OHM/ British accoustics/JBL/Notifier
483	Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required Make: Polycab/Boton/Rallision/FRTEK 2x 1.5 sq.mm
484	Reinstallation, testing and commissioning ofexisting devices of fire and PA system
485	HVAC
486	HVAC HEAVY MACHINERY
487	INLINE FANS Supply, installation, testing and commissioning of single pahse box type Inline fans with motor, fire retardent double layer canvass connection etc complete in all respect & of following capacities. The casing of inline fans shall be acoustically lined & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller.
488	500 CFM (10mm static pressure, single phase)
489	700 CFM (15mm static pressure, single phase)
490	PROPELLER FANS Supply,installation,testingandcommissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, singlephase AC supply complete with gravity louvers & speed regulator etc. The unit Noise level is not exceed 55 db(A) from 1mtr. of source
491	350 CFM
492	1000 CFM (5mm Total Static Pressure) For Kitchen
493	Duct Mounted UV System For Supply Air Ducting - Supply ofAdvanced Oxidation Pentplasma (AOP) cellscomprising of UVC lamp 254 NM on NANO metallic compound target Alumninum matrix cell duly enclosed by a poly casing tube, with the capability to produce plasma Hydroxyl oxidizers along with anti microbial coating having NANOX Technology. The unit shall have inbuilt multipin ion generator (+-10^6) pins along with ultrasonic radio frequency waves for pest repellancy. The UV-C lamp will be a low-pressure mercury type and of such intensity as to provide minimum performance as listed below. The UV-C lamp will produce only Germicidal UV (by definition this means 99.99% UV-C energy).The cell will have built in LED indication system stating the operation of the 4 technologies the UV lamp (254nm ), Oxidiser, ionizer and pest repellant. The power / control cabling between the Pentagon units and the power source / controls shall be included in the cost .The system shall be capable of reducing microbial bacteria, virus and spores , VoC’, odors and particulates matter. The Manufacturer or Supplier Must have the Virology test with the CCMB Lab. The UVGI system have there UV Lamp Tested with the CSIR and Must have Evaluation Report of the same. The equipment shall conform to TUV, GreenPro, CE and ROHS. Standards certifications shall be submitted along with the technical submital. The Pentagon cells should be selected by considering a load factor calculation for each specific area where the equipment is to be installed. The wattage shall not be less than mentioned.The AOP/ Pentagon Cells Should be complete with Transformers, control cabling and Plug Top & necessary power cable.Vendor to comply all Tender Specifications.
494	For 6000-6500 CFM AHU
495	For 11000 CFM AHU
496	MICRO ELECTROSTATIC JET NEEDLE PM2.5 & PM1 AIR FILTERATION SYSTEM CLEANER FOR AHUs - Supply, Installation, Testing & commissioning of Particulate air purificationsystemwithElectricalTraptechnology&Neutral plate to achieve the IAQ parmaters by reducing harmful pollutants i.e. particulate matter. The unit shall be in a powder coated steel casing and self contained with the Series Two way coard.Itshallbeofthreeworkingprinciples.Unitshallbe suitable for the air quantity similar to AHUs. It shall be suitable for operation on 220±6 % volts, 50 Hz,1 phase AC power supply. Theefficiencyofthesystemis99%forPM 1 micronsized particles equivalent to MERV 14. Pressure drop should be morethan7mmWG.TheNeutralstageoffiltershouldbe washabletypeandshouldhaveminimumlifeof3-4years without any consumables. The filtration and purification system shallhave TUV, CE,RoHS,ISOcertificationalongwithFDA compliance. Technical submittals with supported certifications shall be submitted for approval prior to procurement. Quoted price shall be inclusive of all necessary arrangement as required for fixing of filter section within AHU and control wiring etc. Filter need to be installed in the Exsitng Air Handling Unit. As per Space availibility Maximum acceptable thickness of the filter not more than 80mm. Filter Grid mentioned below is of the Exsiting AHU.
497	1st Floor (AHU No. 7 , 8, 9)6000 CFM each (Existing Filter Installed 6 Nos.)
498	1st Floor (AHU No. 10)11000 CFM (Existing Filter Installed 6 Nos.)
499	2nd Floor (AHU No. 11 , 12, 13)6500 CFM each (Existing Filter Installed 8 Nos.)
500	2nd Floor (AHU No. 14)11000 CFM (Existing Filter Installed 6 Nos.)

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Contract For Renovation Of Dbo, 1St, 2Nd, 3Rd And 4Th Floor Of Gail Corporate Office Building At Bhikaji Cama Place, New Delhi, Delhi-Delhi

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Contract For Renovation Of Dbo, 1St, 2Nd, 3Rd And 4Th Floor Of Gail Corporate Office Building At Bhikaji Cama Place, New Delhi, Delhi-Delhi

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us