Assam Agricultural University has published Lumpsum Turnkey Contract On Design Build, Installation And Commissioning Of “Construction Of Shed With Farm Automation ( Donor And Recipent Shed ) With An Maintenance Period Of One Year At Cvsc., Aau, Khanapara Under Project-Implementation Of Ivf Techno. Submission Date for this Tender is 06-10-2023. Shed Construction Tenders in Kamrup Metro Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Sep-2023 | EXTENSION OF | Date | 06-10-2023 |
| Sl. No. | Item Description |
| 1 | CivilInfrastructure shed(S) for Integrated Farm Automation System:Submission of schematic design along with Tender Schematic Design: a) Floor Plans, b) Typical Sections,c) outline Elevations, d) Preliminary site layaout plan, e) Preliminary electrical & plumbing layout & Construction Programme. |
| 2 | Technical specification for 2x3/6 Tandem Type Milking Parlour:Automatic Milking Parlour with Software & Accessories: 1. Automatic Milking Parlour: 2x3 (6 Milking units) Stationary Tandem type Milking Parlour system with calf suckling facility in Parlour as per site, suitable for indigenous/ Cross Bred cow Tandem type stalling suitably integrated with Herd Management Software, containing Vacuum line, Milk line, Wash lines and Automatic Milk Management system for Milk yield recording and Milk Transfer system with Automatic Cleaning system, Pit Ladders with vacuum controlled set of Entry gates. a) Parlour Frame: Should be animal friendly with hot dip galvanized 1.5 /2 inches Pipes b) Vacuum Pump: Vacuum Pump should be direct coupled to save energy and minimize belt losses having minimum Air flow of 800 liter/mm at 50 KPa with 2.2 KW drive motor with 74 DB noise level at 50 Hz c) Milking Control Unit and Clusters: 6 numbers individual milk control units with digital display and milking cluster made with SS shells having claw piece (minimum 300cc volume, non-breakable); minimum 10 L/min. d) Pulsation system: Individually controlled Electronic e) Milk meters: 6 no. ICAR- approved milk meters with digital display.. f) Milk Lines: Stainless steel Milk g) Milk Receiver: 70L capacity, made of SS304, h) Teat Spray: Consisting of 2 numbers of teat Spray i) Programmable Automatic Cleaning System: Milking Parlour should be provided with fully automatic CIP cleaning system. 2. Herd Management Software: The system must be SQL server based enabling data exchange to 3rd party software consisting of Program CD/USB Storage device with suitable system controller for PC. 3. Animal Identification and Activity Monitoring System: The cow identification system should consist of 40 No’s of RFID Ear tags 4. RFC (Remote Farm Connection) : The supplier should be able to provide platform which can connect the software remotely with secure access and support access |
| 3 | Bulk Milk Cooler Open Type 1000 Ltr with Accessories:The Bulk Cooler should be open Type and designed for 38 degrees ambient temperature conditions with rated capacity of 1000 Litres having gross capacity of 1040 Litres with vertical cylindrical shape with agitator and suitable sizer of compressor with R22 refrigerant and supplied with complete accessories along with bulk cooler for proper working and delivery mechanism with Milk pump and other pipelines and Fittings, Starters, Cables, Voltage stabilizer etc. |
| 4 | Cow Resting Cubicle:Resting cubicles from B-class MS 50 mm Pipe having hot dip galvanised to be supplied with Front Rail, Top rail with Suitable clamps and bolted into the concrete. The cubicle must be installed between two animals to accommodate at least 60 Cows. |
| 5 | Cow Rubber Mat:This is designed for softness, comfort and cleanliness, It maximizes the natural resting period and protect knees and hocks during rising/lying and also reduce the risk of teat tramps, lameness and injuries. |
| 6 | Calf Feeding Bottle:Satisfies a calf’s suckling reflex during feeding for new born calf. |
| 7 | Water Trough:SS water Troughs must be supplied. The tip tank provides a large, calm drinking surface from which the animal can drink quickly and without stress. The unit is very easy to clean and to maintain corrosion resistant and robust stainless steel trough construction. Heavy-duty hot dipped galvanized bracket system allows the unit to be either floor or wall mounted. |
| 8 | Water Bowl:Water Bowl should be made of SS designed with flow rate of 10 litres per minute having ½” BSP connection with volumetric capacity of 6 litres and weight of 2.6 kg. The bracket is designed to prevent dirt getting stacked on top of the bowl and polluting the water. |
| 9 | Automatic Swinging Cow Brush for Adult Cows:The swinging cow brush should be able to rotate at an animal-friendly speed swings freely in all directions, smoothly up, over and alongside the animal to provide comfort all around.The brush should have overload protection against overheating and provided with on/off energy saving feature which can enable the brush start/stop automatically. The brush should have 0.14 KW motor and provided with suitable arrangement for easy and flexible installation on walls or posts. The brush should have rotating speed of 26 RPM, 230 V with brush unit of 50 cm diameter with 17 cm long bristles. Technical Data: •Rotating speed 26 rpm 230V, 31 rpm 110V •Two swinging points, one at either end of the curved arm •One single and solid brush unit with 18 cm long bristle •Automatic on/off •Overload protection •Switch for additional safety •Dimensions: 100x50x132 cm •Diameter brush: 50 cm • Width: 60 cm • Weight: 70 kg • Power: 0.14 kW |
| 10 | Dairy Fan:Technical Data: •Propeller Diameter: 1200 - 1280 mm (6 blades) •Voltage / Frequency: 3 x 400 V / 50 Hz (or other according to country setup) •Amperage: 2.0 Amp •Power Consumption: 0.75- 1 kW •Motor Protection Class: IP 55 •Noise Level: 68 dB (A) 5m •Fan Speed: 400 - 450 rpm •Max Capacity at 0 Pa: 34000 m3/h •Specific Efficiency: 39.1 m3/h/W •Weight: 45 – 50 kg |
| 11 | Accessories & Start up Kit:Rubber Liner,Dip Cup,Test Plug for Liner,Non Kick Bar,S- Hook for milking Cluster,CMT Kit, Lactifence,Dipal,Rubber Transparent pipe,Milking Apron,Lubricants etc. |
| 12 | Utilities/Additional Items for supporting the equipmentduring installation/ After Sale Service:The supplier should supply safety protection devices such as Voltage Stabilizer of suitable capacity. Earthing pit for Milking system and all shed Equipment’s with Lighting resisters for the project site.The Supplier should provide all the electrification work of three phase and single phase including all the control panels and necessary cabling up to equipment with safety protections. The Supplier should supply all the plumbing lines along with Water Storage tanks for attaching the equipment in sheds and Parlour with suitable pressure with Hot water generator to heat water up to 80 degrees with suitable capacity required to run the milking parlor and bulk cooler. All civil, architectural and structural and foundation drawings required will be provided by tenderer and suitable product related information and schematic drawings needed to prepare should be provided by the supplier. All the Civil work will be done by tenderer. The supplying firm should have well established service, repair & maintenance network in Assam with service back up. The points of presence with contact details are required to be submitted along with the technical bids. The Standard equipment along with accessories should be guaranteed for period of 1year. A comprehensive after sales services should be provided by the supplier, during and after the guarantee/ warrantee period of the equipment. Water Tank ( 5000Ltr) with staging Clamps, Fittings Piping for Cubicles etc. DG 25 KVA PC for Software & Bus Cable Electrical Work with Panels and Wiring etc Railings, Partition, Gates etc. Tractor with 2 way directional valve for TMR Support and Platform needed for Brush, Manure separator Voltage Stabilizer Plumbing Work and Pipelines with Valves etc. Corrugated, Flexible Piping for Manure Separator Clamp for water bowl C Channel for manure scraper, Jet pump with accessories of 2 HP capacity |
| 13 | Jaquar(Cat No. ALD-563) or Equivalent |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
