Mohan Lal Sukhadia University-MLSU has published Tender For Special Repairing Work Of Non-Residential Building.. Submission Date for this Tender is 08-09-2023. Building Work Tenders in Udaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1:4:8 or leaner mix |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.d in cement mortar. |
| 4 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar. |
| 5 | Dismantling door, windows and clearstory windows steel or wood shutter incl. Chowkhats and hold fast etc.complete and stacking within 50 mtr. lead Of area 3 square meter and below. |
| 6 | ---do---- lead of area exceeding 3 sqm. |
| 7 | Dismantling steel work in single sections including dismembering and stacking within 50 mtr. lead in R.S. joists. |
| 8 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. |
| 9 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead for thickness of tiles 10mm to 25mm. |
| 10 | Dismantling stone slab/terrazzo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 mtr. Lead. |
| 11 | Dismantling roofing including ridges, hips, valleys and rafters etc. and stacking the within 50 mtr. lead of G.I. sheet. |
| 12 | Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pies within 50 mtr. lead 15mm to 40mm nominal bore. |
| 13 | ---do--- above 40mm nominal bore. |
| 14 | Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster incl.disposal of rubbish to the dumping ground within 50 mtr.lead. |
| 15 | Renewing glass panes, with putty and nails wherever necessary Float glass panes of thickness 4 mm |
| 16 | ---do--- 5.5mm thick plain glass panes. |
| 17 | Renewing glass panes, with wooden fillets wherever necessary 4mm thick plain glass panes. |
| 18 | Renewing glass panes, with wooden fillets wherever necessary 5.5mm thick plain glass panes. |
| 19 | Labour charges for removing and refixing aluminium partions/door including minor repair and alteration in the same. |
| 20 | Repair to stone masonry in cement sand mortar 1:6 with old and new stone. |
| 21 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 22 | Patch repair to cement concrete floor incld. digging out old floor in regular shape and removal of rubbish curing etc.Complete in all respect. |
| 23 | Labour charges for repair to door/ window without using any material such as applying randha (finishing) tightening of bolts & screw etc. |
| 24 | Repair of rolling shutter with replacement of shutter spring incl. removal of old spring in the existing rolling shutter incld. Cost of new spring. |
| 25 | Repair of rolling shutter with using any material such as bend repair, tightening of spring, bolt and screw etc. complete. |
| 26 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garage doors, compound wall gates etc. by welding drilling complete include Cost of welding rods and hire charge of welding machine and TP etc. complete. |
| 27 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 28 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :Ordinary rock |
| 29 | ......do......Hard rock (requiring blasting) useful material 30% |
| 30 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc in layers not exceeding 20 cm in depth, consolidating each deposited layers by ramming and watering including lead up to 50 mtr. and with all lift. |
| 31 | Cement sand mortar 1:6 (1 cement: 6 sand) |
| 32 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level using crusher broken aggregate M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 33 | ---do--- M-10 grade Nominal mix (with graded stone aggregate 20mm nominal size) |
| 34 | ---do--- 1:5:10 (1 cement: 5 coars sand: 10 graded stone aggregate 40mm nominal size) |
| 35 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 36 | .....do.........M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 37 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 38 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 39 | Add extra for Square or Rectangular Pillars in Superstructre brick work up to five storey Upto 45 cm length and all sides are free |
| 40 | Half brick masonry in foundation & plinth using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 41 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 42 | Brick work in partition in super structure upto five storey 7cm. thick (brick on edges) using bricks of class designation 75 in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 43 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand) |
| 44 | .Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 45 | Add extra for Random Rubble stone masonry with hard stone in Wall upto 30cm. and less thickness |
| 46 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick.. |
| 47 | ...do...... Kota stone 30mm thick. |
| 48 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 up to 15 cm thick. |
| 49 | Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Rajnagar 1st quality/Ageria with light spots.Above 3601 Cm2 Slabs |
| 50 | ...............do.................Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs |
| 51 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishingomplete.South (Red) Above 3601 Cm2 Slabs |
| 52 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble work Full Edge moulding |
| 53 | ..................do.................Granite/Kota Stone Work Full Edge moulding |
| 54 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanit counters and similar location in marble/stone work including necessary holes for pillars taps etc including rubbing and polishing of cut edge etc. complete. |
| 55 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, ralthal, stone kharanja, lime terracing 90mm average thickness (as per JAIPUR PRACTICE ) with ceiling pointing in cement sand mortar 1:3 complete as per specification for span above 2.50 mtr. And up to 3.0 mtr. for first floor. |
| 56 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 57 | Providing and laying brick kharanja on roofs with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound in square pattern 75mm to 100mm thick average |
| 58 | Providing and laying brick kharanja on roofs with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound in square pattern 55 mm to 60 mm thick average. |
| 59 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.75mm thick with 20mm thick nominal size aggregate. |
| 60 | ..........do............40mm thick with 20mm thick nominal size aggregate. |
| 61 | Precast terrazo tiles of approved make 20mmthick with marble chips of size up to 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 30mm thick bed of cement sand mortar 1:4 Dark shade using ordinary cement. |
| 62 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Dark shade using ordinary cement.. |
| 63 | Add extra for chequered coloured plain cement concrete or specially manufactured non-slipping 9-12 mm ironite topping tiles of approved make 20mm thick. |
| 64 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 65 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm |
| 66 | Grinding of existing floor with 60, 80, 120 and 360 No. Carborundum stone including cost of wax polishing complete |
| 67 | Add extra for mirror polishing on existing marble work/ Kota stone flooring work where ever required to give high gloss finish complete. |
| 68 | Add extra for mirror polishing on existing marble work/ Kota stone flooring work where ever required to give high gloss finish complete |
| 69 | Random rubble dry stone kharanja under floor. |
| 70 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished 25 mm thick. |
| 71 | --do-- 20 mm thick. |
| 72 | --do-- 12 mm thick. |
| 73 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished 25 mm thick. |
| 74 | -------do------- 20mm thick. |
| 75 | Finishing with neat cement (punning). |
| 76 | Making grooves as per design in plaster 10mm to 20mm wide. |
| 77 | Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design |
| 78 | 6mm cement plaster to ceiling of mix 1:3 (1 cement:3 fine sand) |
| 79 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) |
| 80 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work |
| 81 | Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement |
| 82 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement:3 sand) raised and cut pointing. |
| 83 | Pointing on stone slab ceiling with cement mortar 1:3 (1 cement: 3 sand) Flush / Ruled/ Struck or weathered pointing. |
| 84 | Making holes in stone masonary wall upto 450mmx450mm size and making good in CM 1:6 |
| 85 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chaukhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead. Door chowkhats |
| 86 | Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 75mm thick. |
| 87 | ---do--- 50mm thick. |
| 88 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure "A" :35 mm thick Decorative teak veneer both side |
| 89 | Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). |
| 90 | P/F Ist quality standard White, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles of ISI marked (IS:13753) of size 200mmx300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillar) |
| 91 | Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles. |
| 92 | Extra for using size above 200x300mm in glazed tiles . |
| 93 | P&F 75mm widen decorative order in different shades and in all colours for glazed tiles. |
| 94 | P&F Motive pieces all colours for glazed tiles laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. size 200x300mm |
| 95 | P/F Ist quality MAT finished ceramic tiles 300x300mm confirming to IS:13753 colour such as white, grey, ivory fume red brown, in walls, floors, steps, pillars etc. laid on a bed on neat cement slurry including nicely finished joints using waterproof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) |
| 96 | Extra for using400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. |
| 97 | Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in MAT finished tiles. |
| 98 | P/F Ist quality Vitrified Porcelain Polished tiles on floor skirting and steps etc. in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make in all colour and shade, laid with 20mm thick C.M. 1:4 including grouting the joints white cement and matching pigment etc. complete size 600mmx600mm |
| 99 | ...................do.......... size 800mmx800mm |
| 100 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).Size 800mm x 1200mm |
| 101 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume redbrown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 600mm x 600mm |
| 102 | P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 1200 mm |
| 103 | P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 1200mm |
| 104 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 1200mm |
| 105 | Add extra for Fixing glazed/ceramic/vitrified tiles with cement based high polymer modified quick set tile adhesive (water based) confirming to IS 15477, using 5 kg. adhesive per sqm of tile area, in average 3mm thickness complete. |
| 106 | Carriageof earth including loading, unloading etc. lead upto 5.0 Km. |
| 107 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or ore coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 108 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 109 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.1.00 mm thick with zinc coating not less than 275 gm/m |
| 110 | Providing ridges or hips of width 600mm overall with plain GI sheet fixed with GI or J or L-hooks bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.63mm thick with zinc coating not less than 275 |
| 111 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated „J? or „L? hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 3.0mm thick (Wt. 3.3 Kg./Mtr. Sq.) |
| 112 | Add extra for corrugated fiber glass sheet as per asbestos cement profile/ steel profile for 3.00 mm thick. |
| 113 | L/C for fixing of GI/AC sheet include, Cutting jhiri and repair, cutting of sheet, fixing of sheet with J or L hook and bitumen washer as per direction of Engineer Incharge. |
| 114 | Repair to damaged RCC slabs, beams and columns etc for strengtheing with cement mortar 1 : 3 in following steps i) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. ii) Applying Epoxy primer on the exposed steel bars. iii) Applying Epoxy hardener and resin mix (as per manufectured"s specification) on concrete and steel bars with brush. iv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. vi) Cure the plastered surface for 15 days |
| 115 | Surfacedressing of the ground including removing vegetation and inequalities not exceeding 15 cm deepand disposal of rubbish lead up to 50 mtr and lift up to 1.5 mtr All kinds of soil |
| 116 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix |
| 117 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix |
| 118 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excludingthe cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 119 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 120 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 121 | ---do---- columns, pillars, posts and struts etc. |
| 122 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ("Original producers" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 123 | 40mm thick marble chips flooring rubbed and polished to granolithic finish under layer 34mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) including fixing of dividing strips (excluding the cost of strips) and top layer 6mm thick with marble chips of approved colour and 1mm to 4mm nominal size laid in cement marble chips mix of 4:7 ( 4 cement : 7 marble chips) by volume including cement slurry etc. complete Light shade pigment with white cement. |
| 124 | Marble chips skirting/dado rubbed and polished to granolithic finish 6mm thick with white marble chips and approved colour and size from smallest to 4mm nominal size laid in cement marble chips mix of 4:7 ( 4 cement : 7 marble chips) by volume including fixing of dividing strips (excluding the cost of strips)18mm thick with under layer of 12mm thick cement plaster 1:3 (1 cement: 3 coarse sand) Light shade pigment with white cement |
| 125 | 25mm thick fine dressed and machine grinded surface stone flooring over 20mm (Av.) thick base in cement in CM 1:6 with joints finished flush with Red sand stone.(Karauli stone) |
| 126 | Providing and Laying 80 mm thick cement concrete blocks of M-40 Grade (Manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. Manufactured with steel moulds(Milled and manufactured in CSI diamond or CSI Nitro process for accuracy) on steel base plate of min 16 mm thick; Having Vibration and pressing action both together with the help ofmultiple synchronised vibrators. Power of hydraulic station should be minimum 50KW for compaction and cured in controlled chambers having humidity control and automated air circulation system) spreading 25mm thick sand underneath and filling joints with sand on existing W.B.M.base, as per IS15658:2006 and all materials shall conform to MoRTH Specification Clause 602. |
| 127 | Kerb Stones of 1200x300x150, 1000x450x150, 1000x600x150, 600x300x150 size (M-30) Providing and Laying cement concrete Kerb Stones of different sizes in M-30 grade (Manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. Manufactured with steel moulds (Milled and manufactured in CSI diamond or CSI Nitro process for accuracy) on steel base plate of min 16 mm thick; Having Vibration and pressing action both together with the help of multiple synchronised vibrators. Power of hydraulic station should be minimum 50KW for compaction and cured in controlled chambers having humidity control and automated air circulation system) in position to the required line, level and curvature jointed with cement mortar 1:3 (1 Cement : 3 Coarse sand) including making of joints, drainage opening wherever required. |
| 128 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 129 | Structural steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. joist/ flats, tees, angles and channels. |
| 130 | Steel work in built up tubular trusses including cutting cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level up to 4.5 mtr. height. Hot finished welded type tubes. |
| 131 | P/F. T-Iron frames for doors, windows and ventilators of mild steel tee sections, joints mitered and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm, of 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 132 | S/F in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. |
| 133 | P&F cow catcher made of R.S. joist angles channels MS round including cutting welding and fabrication with priming coat of red oxide (as per design). |
| 134 | P/F steel gate, grating and grills made of angles, tees, square bars, flats or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide. |
| 135 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 136 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of Tiron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). |
| 137 | P&F 1mm thick M.S. sheet garrage door shutters with frame of 40x40x6mm angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer (Excluding cost of frames.) using M.S. Angles 40x40x6mm for diagonal braces. |
| 138 | S&F rolling shutters of approved make, made of 80x1.25 mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3 cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment.) |
| 139 | Add extra for rolling shutter for providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 Sqm. and upto 16.80 Sqm in the area. |
| 140 | P/F M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitability diagonally braced with 25x3 mm flat iron of above and below lock rail of size 50x5mm beading extra including all fittings as per direction Engg. Incharge but excluding cost of chowkhats including two coats of anticorrosive red oxide primer paint M.S. sheet 18 S.W.G. |
| 141 | ---do—double leaf door shutter |
| 142 | P/F steel glazed doors, windows and ventilators shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3 mm. 10cm long embedded in cement concrete block 15x10x10cm of 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs & screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with copper glazing clip and special metal sash putty of approved make or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fitting except necessary hings of pivots, steel handles, peg stay etc. as required Windows side hung /Ventilators top or centre hung (openable) |
| 143 | ............do............Windows fixed |
| 144 | ---do--- Doors. |
| 145 | Add extra for 5mm thick plain glass instead of 4mm thick plain glass. |
| 146 | S/F fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3 mm with suitable screw at not exceeding 150 mm distance. |
| 147 | P/F square bars or other flat welded to window ventilators etc. |
| 148 | P&F welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, screws, clips etc. complete (excluding frame work ) of size welded mesh Welded mesh 25 mmx 25 mm x 2.1 mm |
| 149 | 180 cm high fencing with angle iron post 55x55x6mm placed at every 3 Mtr. Apart 45cm. in ground embedded in cement concrete 1:3:6 (30x30x60 cm) corner and every tenth post to be strutted with 55x55x6mm angle iron provide with 6 horizontal lines and two diagonal of black barbed wire between two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete. |
| 150 | Add for using galvanized barbed wire instead of black barbed wire. |
| 151 | S/F of chain link fencing with angle iron posts 50x50x6mm placed at every 3 mtr. apart 30 cm in ground embedded in cement concrete 1:3:6 ( 30x30x45 cm) corner and every tenth post to be strutted with (50x50x6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size 50mmx50mmx3.15mm |
| 152 | & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600mm |
| 153 | Supplying & fixing door, window chowkhats and other frames, including antitermite treatment, M.S. flat, holdfasts of size 250x40x3mm fixed with M.S. bolt 5mm dia 50mm long embedded in cement concrete M-15 grade. Sal wood grade –I |
| 154 | __do___ Nigeria teak wood Grade - I. |
| 155 | Supplying and fixing wood work in frames of wall panelling, false ceiling partition wall etc. as per approved design and drawing including antitermite treatment. Hollock wood Grade - I. |
| 156 | P/F fully paneled Double leaf shutter for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure “A” and width of styles & top rails of 100mm and lock rails width of 150 mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12 mm size on both faces complete35 mm thick Nigeria wood grade I |
| 157 | Labour charges for removing and refixing aluminium partitions/door including minor repair and alteration in the same. |
| 158 | Repair of door, window shutters including cost of material and labour for change of damaged: |
| 159 | Style/rail of teak wood30mm thick/ Aluminium section |
| 160 | 4” wide |
| 161 | 6” wide |
| 162 | Panel by |
| 163 | Shuttering ply = 9mm thick (Commercial) |
| 164 | Wire gauge 14 mesh x 24 gauge |
| 165 | Plain Glass Panes 4mm thick |
| 166 | Aldrop of mild steel |
| 167 | 12” long x 12 mm dia. |
| 168 | 8” long x 10 mm dia. |
| 169 | Stopper of Aluminium with |
| 170 | Single Rubber Gutka |
| 171 | Double Rubber Gutka |
| 172 | Door Springs of mild steel |
| 173 | Steel Hinges |
| 174 | For Wooden Chowkhat 3” Size |
| 175 | For Wooden Chowkhat 4” Size |
| 176 | Mild Steel Tower Bolt 6” long |
| 177 | Steel Locking Bolt |
| 178 | Steel Handle 6” size |
| 179 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. |
| 180 | Providing and injection chlopyrifous Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III 1971 as amended from time to time and creating a continuous chemical barrier under and around the column pits wall trenches basement excavation top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (plinth floor area only shall be measured for payment) |
| 181 | Providing and fixing to existing door frames 30mm thick factory made polyvinyl chloride (PVC) door shutter made of stiles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2mm +/- 0.2mm with inbuilt decorative moulding edging on one side. The stiles and rails mitred and joined and the corners by means of M.S.galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0mmand stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x20 mm and 1mm +/- 0.1mm wall thickness. The lock rail made up of „H? section, a uPVC hollow section of size 100x30 mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of lastic/galvanized M.S.tube „U? cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 610mm,having overall thickness of 20mm and 1mm+/- 0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers.complete as per manufacturer?s specification and direction of Engineer-in-charge.(For W.C.and bathroom door shutter) |
| 182 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. |
| 183 | Providing and injecting by hand operated pressure pumps chemical Emulsion timber ground treatment (TCGT)in ration 1:2 as per manufacturers specifications for POST CONSTRUCTIONAL Anti termite treatment (as per IS 6313) part-III 1971 as amended from time to time.Along external wall where apron is not provided using Chemical emulsion @ 7.5 litre/sqm of the vertical surface of the sub structure to a depth of 300 mm including excavation of channel along the wall & rodding etc. complete with chloropyrfos/Lindane EC 20% with 1% concentration. |
| 184 | Providing and laying water proofing treatment in sunken portion of WCs bathroom etc. by applying polymer modified cementous slurry consisting of appearing. (I) First layer of slurry of ement @ 0.448 kg/sqm mixed with polymer @ 0.253 kg/sqm This layer will be allowed to air cure for 4 hours. (II) Second layer of slurry of cement @ .242 kg/sqm mixed with polymer @ 0.126 kg/sqm This layer will be be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints corners, junction with polymer mixed slurry. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
