Paschimanchal Vidyut Vitran Nigam Limited has published Completion Of Works Under Full Deposit(Kamil S/O Hanif & Other) (Jhatpat Portal, Nivesh Mitra And Line Shifting Works Under Full Deposit Scheme) Under Edd-Iv, Meerut. Submission Date for this Tender is 08-09-2023. Bolts Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Cartage of following material from store center to site of work including loading & unloading at both ends maximum distance up to 40 Km. :- |
2 | PCC Pole 8.5 Mtr Long (5 Nos)/STP Pole 11 Mtr. Long (12 Nos.). |
3 | Carriage of 100 KVA t/f. |
4 | Line material such as ACSR weasel conductor etc. |
5 | Line material such as LT ABC etc. |
6 | Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, stay set, junction three phase, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc. |
7 | Erection of PCC Pole 8.5 mtr long/STP Pole 11 mtr long after digging of soil and make a pit of size 1.6x1.2x0.6 mtr deep each pole including grouting of pole having (ratio 1:4:8) & back filling of soil and proper ramming after completion of work. |
8 | Fabrication and fixing of all 11 KV HT/LT line Accessories. |
9 | Erection of Double pole on PCC pole 8.5 mtr after digging of soil and make a pit of size 1.6x1.2x0.6 mtr deep each pole including grouting of pole having (ratio 1:4:8) & back filling of soil and proper ramming after completion of work. |
10 | Fabrication and fixing of MS angle and MS channel, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators on D/P Pole. |
11 | Mounting of 100KVA T/F with proper jumpering of HT side and fixing of cable on LT side of T/F. |
12 | Making a section pole to exist pole after fabrication & fixing of T channel fixing of all 11 KV accessories. |
13 | Erection of stay rod complete after digging a pit of size 1.6 mtr deep and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming. |
14 | Laying lifting stringing & proper sagging of ACSR weasel conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly. |
15 | Laying of ACSR Weasel Cable of various size including fixing of all ACSR Weasel on support |
16 | Fixing of Distribution box including fixing the cable from transformar and consumer service cable |
17 | Earthing of each 11 KV line pole & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire. |
18 | Grouting of PCC Poles 8.5 mtr/STP POLE 11 mtr With 106 mtr deep and Grouting of Stay Here with |
19 | Guarding of Line with G.I wire having 2 no. horizontal wire & 3 mtr distance of SWG G.I wire after fabrication of guard cross arms of & fixing the same in supports. |
20 | Providing & fixing MS Nut Bolt, J Hook, Holding Clamp, Danger Board, Dead End Clamp, Percing Clamp, Box Clamp |
21 | Cutting & chopping tree branches near side of line for making the clearance between line and tree. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail