Carrying Out The Electrification Work Against Packages To Be Sanctioned Under Deposit Head In The Areaof Eudd-Iv, Aligarh, aligarh-Uttar Pradesh

Carrying Out The Electrification Work Against Packages To Be Sanctioned Under Deposit Head In The Areaof Eudd-Iv, Aligarh- 1 Safe Carriage Of 11 Mtrs. S.T Poles / 9 Mtrs. St Poles / 8.5 Mtrs. Pcc Poles From Store Centre, Sarsol To The Respective Site Of Work Including The Work Of Its Loading & Unloading At The Repective Ends. 2 Safe Carriage Of Line Material Viz. Conductor, G.I. Earth Wire, Cross Arm, Angle, Channel, Insulators, Clamps & Other Material From Store Centre, Sarsol To The Respective Site Of Work Including The Work Of Its Loading & Unloading At The Respective Ends. 3 Erection Of Single Support By 11 Mtrs. S.T Poles / 9 Mtrs. St Poles / 8.5 Mtrs. Pcc Pole Including Fixing Complete Ht / Lt Fittings As Per Resspo Munual Including The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. 4 Grouting Of Single Support ( 11 Mtrs. S.T Poles / 9 Mtrs. St Poles / 8.5 Mtrs. Pcc Pole ) As Per Resspo Manual Including Of The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. The Support Shall Be Grouted With Cement, Sand & Brick Ballast In Ratio 1:4:8 Including The Cost Of Arrangement Of Cement, Sand, Brick Ballast Etc. 5 Erection & Grouting Of 11 Mtrs. St Double Pole Including Fixing Complete Ht / Lt Fitting As Per Resspo Manual Including The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. The Support Shall Be Grouted With Cement, Sand & Brick Ballast In Ratio 1:4:8 Including The Cost Of Arrangement Of Cement, Sand, Brick Ballast Etc. 6 Laying, Sagging, Stringing, Binding & Jumpering Of Acsr Weasel Conductor / Dog Conductor On The Newly Erected Pole As Per Respo Manual And As Per Direction Of Supervising Engineer, Including The Cost Of Arrangement Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work. 7 Laying Spreading, Lifting And Final Sagging Of Aerial Bunched Cable ( All Size ) . Including Fixing Of All Accessories As Per Resspo Manual And As Per Direction Of Supervising Engineer, Including The Cost Of Arrangement Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work. : 8 Erection And Grouting Of Stay Set Including The Work Of Nozzling Etc. As Per Respo Manual And Also Including The Cost Of Arrangement Of All Grouting Material, Labour, T&P Etc. Required For Proper Completion Of Work As Per Resspo Manual. 9 Fixing & Connecting Of Earthing Rods As Per Resspo Manual Including The Cost Of Labour, T&P Etc. Required For Proper Completion Of Work. 10 Fixing Of Lt Distribution Box Including Making Connections Of Distribution Box With Lt Mains By Piercing Clamps For Aerial Bunched Cable.The Work Will Also Include The Opening Of The Service Connection Of The Consumer And Its Connecting In Distribution Box. 11 Safe Carriage Of 25 Kva / 63 Kva / 100 Kva Distribution Transformer Fromelectricity Store Centre, Aligarh Or From Any Other Place To The Respective Site Of Work Including Loading & Unloading At The Respective Ends And Mounting On Double Pole / Placement On Plinth Including Proper Jumpering From 11 Kv Line To The Transformer And Also Connecting The Lt Site Cables As Per Resspo Manual. 12 Neutral & Body Earthing At 25 Kva / 63 Kva / 100 Kva Distribution Transformer By Drilling / Boringa Hole Of Size 200 Mm Dia And 3000Mm Long In Depth And Then Inserting The Gel Earthing Electrodes Of Size 50Mm Dia And 3000 Mm Long Inside The Pit Then Mix The Back Fill Compound Nicely With The Soil And Re-Filling The Empty Space Around The Earthing Electrode Including Making Of Chamber At The Top Of The Earthing As Per Direction Of Supervising Engineer. It Includes The Cost Of All Material Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. The Aforesaid Work Shall Be Carried Outas Per Resspo Norms. Max Neutral To Earth Voltage Should Be Less Than 3 Volts And Earth Resistance Should Be Less Than 1 Ohm. 13 Fabrication Of T-Off Channel As Per Resspo Norms. 14 Fabrication Of Top Channel As Per Resspo Norms. 15 Fabrication Of Dropper Channel As Per Resspo Norms. 16 Fabrication Of T / F Base Channel / Angle As Per Resspo Norms. 17 Fabrication Of V-Type Cross Arm As Per Resspo Norms. 18 Providing / Fixing Of Missing Nuts, Bolts & Washer. 19 Providing & Fixing Of All Type Lt Clmaps 20 Safe Carriage Of 11 Kv Xlpe Cable Upto 3X185 Sq.Mm. From Store Centre, Sarsol To The Respective Site Of Work Including The Work Of Its Loading & Unloading At The Respective Ends. 21 Laying Of 11 Kv Xlpe Cable Upto 3X185 Sq.Mm. Including Making Proper Connections At Both Ends. The Work Includes The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. 22 Providing 11 Kv Cable Jointing Kit ( O / D & I / D ) Upto 3X185 Sq.Mm. And Its Filling As Per Resspo Norms. 23 Gurading Of 11 Kv Line By Laying Two Nos. Gi Wire Paraller And Fixing Of Lacings ( Tilli ) At A Distance At 2-3 Mtrs. As Per Respo Norms And Also Including The Cost Of Arrangement Of Labour, T&P Etc Required For Proper Completion Of Work. 24 Safe Carriage Of Ct / Pt Pole Mounting Unit And Its Proper Installation On Double Poole After Fixing Of Channel With M.S. Clamps And Nuts & Bolts For Holding The Channel Angle Etc. The Unit Body Shall Be Earthed By Connecting M.S. Strip Of Size 1 / 8X1 Finally Connected To Earthing Rod Of Size 20Mm.X2540 Mm. 11 Kv Line Shall Be Connected To Unit As Per Instructions Of Sdo / Ae ( M ) . The M.S. Strip & Earth Rod Shall Be Included In The Scope Of Work. 25 Safe Carriage Of 11 Kv Pilfer Proof Metering Cubical 10 / 05 Amp. And Its Proper Installation At Pit Site As Per Resspo Manuals

INR 1180 /-

INR 10000.0 /-

Refer document