|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 2 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed |
| 3 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position. |
| 4 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed |
| 5 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws as complete all as specified and directed |
| 6 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 7 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed |
| 8 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed |
| 9 | M&L for second class hardwood as in scantlings clean sawn timberfixed complete all as specified and directed |
| 10 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified and directed. |
| 11 | M&L for preparation of Newwood and wood based surfaces of any description not otherwise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and directed. |
| 12 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 13 | M & L for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalicsurfaceconduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed,in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting modular switches, socket, bell push, fan regulators etc. as required with modular frame and cover of 1 module to 18 module as required at site all as specified and as directed for the following points :-(a) one light point controlled by one 1-way switch. |
| 14 | (c) one three pin socket out let 5 amps on independent board complete. |
| 15 | (d) one three pin socket out let 5 amps on Same board complete. |
| 16 | (e) one call bellpoint controlled by one bell switch. |
| 17 | Ditto all as above but with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Voltsfor one 3 pin socket out let 15 amps on independent board complete all as specified and directed. |
| 18 | S&F Switch modular type 6A 240 Voltscomplete all as specified and directed. |
| 19 | S&F bell push switch modular type 5 Amps SP complete all as directed |
| 20 | S&F Switch modular type 15A 240 Volts complete all as directed |
| 21 | M & L ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed |
| 22 | S&F Socketoutlet 2 in 1,3 pin, 5/6 amp modular 2 module type with shutters complete. |
| 23 | S&F Socketoutlet 2 in 1,3 pin, 5 and 15 amp modular type 2-module shutters complete all as specified and directed. |
| 24 | Supply and fixing LED luminaire 600 mm x 600 mm, 42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 25 | M & L Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS-H is PVC insulated unsheathed, 1100 Volts grade, single core copper conductor cable, drawing through and including suitable size of steel conduit as required with accessories such as junction boxes, bends, tees etc. on surface/recessed.Rate shall be including for taking down old submain wiring and making good disturbed surfaces of walls/floors etc complete all as specified and directed. for the following.(a) 2x1.5 sq.mm + 1x1.5 sq. mm earth wire |
| 26 | (b) 2x4.0 sq.mm + 1x4.0 sq. mm earth wire |
| 27 | (c) 2x6.0 sq.mm + 1x6.0 sq. mm earth wire |
| 28 | S&F in Replacementsheet metal enclosure powder coated ,MCCBDB,\"G\" frameTPN vertical D/D, 4 way confirming to IP-43 Protecton including one number MCCB, three pole, 100A, 25KA for incoming bus bar, neutral links, blanking plates etc, complete all as specified and directed. |
| 29 | Supply.and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps.Neutral link, Earth bar, double door SPN 8 way 230volts complete all as specified and directed. |
| 30 | S&F MCB Single pole 240 volts 6-32 Amps, 10KA, B-series, complete all as specified and directed. |
| 31 | S&F MCB SPN 240 volts 0- 32 Amps, 10KA, B-series complete all as specified and directed. |
| 32 | MCB TPN 240 volts 25- 100 Amps, 16KA, B-series,complete all as specified and directed. |
