Health And Family Welfare Department has published Tender For Renovation And Development Of Ina Martyrs Memorial Complex Under The Commemoration Of 125Th Birth Anniversary Of Netaji Subash Chandra Bose Sh Civil Works. Submission Date for this Tender is 19-09-2023. Building Work Tenders in Imphal West Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Vertical Extention of I.N.A. War Museum Building |
| 2 | R.C.C. Work |
| 3 | Reinforced cement concrete work in beams, suspended floors,roofs having stope upto 15o 9 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement |
| 5 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforcementfor RCC work including straightening, cutting, bending, placing in position and binding all complete. |
| 7 | a)Thermo-Mechanically Treated bars |
| 8 | BRICK WORKS: |
| 9 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) insuperstructure. |
| 10 | Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 11 | FORM WORK |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 13 | Suspended floors, roofs, landings, balconies and access |
| 14 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 15 | Lintels, beams, plinth beams, girders, bressumers ands cantilevers. |
| 16 | Steel work in built up tubular (round, square or rectangular tubes etc.)trusses etc., including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, includingwelding and bolted including special shaped washers etc.complete |
| 17 | Electric resistance or induction but welded tubes |
| 18 | Structural steel work riveted, bolted or welded in built up sections, kg 93.53 trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 19 | Providing and fixing M.S. fan clamp typo I or Il of 16 mm dia M.S.bar bent to Shapo with hooked ends in R.C,C, slabs, beams duringlaying Including painting tho oxposed portion 01 loop, all as por standard dosign complete. |
| 20 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). |
| 21 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size |
| 22 | WOOD WORKS |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately |
| 24 | a) Local best quality Teak Wood |
| 25 | Providing and fixing panellod or panollod and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.. |
| 26 | a) Local best quality Teak Wood |
| 27 | 35 mm thick shutters |
| 28 | Providing 40x5 mm flat iron hold fast 40 cm tong including fixingto frame with 1 Omm diameter bolts, nuts and wooden plugs and embedding in cement concrete block x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 29 | Providing and fixing bright finished brass 100 mm mortice latch withone dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approvedquality). |
| 30 | Providing and fixing bright finished brass towerbolts (barrel type) with necessary screws etc. complete |
| 31 | 250x10 mm |
| 32 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc, complete |
| 33 | 125x65x2.12 mm |
| 34 | FLOORING |
| 35 | Providing and laying Vitrified tiles in floor in diffe rent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.080/0 and conforming to 19.15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will bo done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubbermallet for placing the tiles gently and easily. |
| 36 | Sizes of Tiles 600x600 mm (Double charged) |
| 37 | Providing and laying vitrified tiles in different sizes (thickness to be specefied by manufacture), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement motar 1:3 (1cement:3c/sand), jonting with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 38 | sizes of tile 500x500 mm |
| 39 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerincharge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using selt drilling Iself tapping screws ot size (5.5x 55 mm) with EPDM seal,comptete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with |
| 40 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 41 | Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts andnuts and or C.I. seam bolts and nuts, G.l. plain and bitumen washers complete |
| 42 | Ridges plain (500 - 600mm) |
| 43 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 44 | 12 mmcement plaster of mix : |
| 45 | 1:3 ( 1 cement : 3 C/s ) |
| 46 | 15 mm cement plaster on rough side of single or half brick wall of mix |
| 47 | 1:4 (1 cement: 4 coarse sand) |
| 48 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 49 | 75 mm |
| 50 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.], rain water pipes embedded in and including cement concrete blocks 10x10x IOcm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. |
| 51 | 100 mm diameter |
| 52 | Applying one coat of cement primer of approved quality on wall surface. |
| 53 | water thinnable cement primer |
| 54 | finishing walls with Acrylic smooth exterior paint of required shade : |
| 55 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm). |
| 56 | Providing and applying white cement based putty of average thickness Imm,of approved brand and manufacturer, over the plasterod wall surface to prepare thesurface even and smooth complete |
| 57 | Applying priming coat : |
| 58 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 59 | Painting with oil type wood preservative of approved brand and manufacture. |
| 60 | New work( Two or more coats) |
| 61 | Painting steel work with Delux Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltrs/10sqm of approved brand and manufacture |
| 62 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 63 | New work (two or more coats) over and including priming coat with cement primer:- |
| 64 | S.H: Providing Water Supply and Sanitary Installation. |
| 65 | EARTH WORKS: |
| 66 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 67 | All Kinds of Soil |
| 68 | Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 69 | CEMENT CONCRETE WORKS: |
| 70 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 71 | 1:3:6 ( 1 Cement.: 3 coarse sand 6 graded stone aggregate 40 mm nominal size) |
| 72 | 1:4:8 ( 1 Cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size) |
| 73 | FORM WORKS: |
| 74 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 75 | Foundations, footings, bases of columns, etc. for mass concrete |
| 76 | Suspended floors, roofs, landings, balconies and access |
| 77 | RCC WORKS: |
| 78 | Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 79 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 80 | Thermo-Mechanically Treated bars |
| 81 | PRE-CAST: |
| 82 | Providing, hoisting and fixing upto floor five lovol procast reinforced comont concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the tike including tho cost 01 required contoring, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3graded stone aggregate 20mm nominal size). |
| 83 | BRICK WORKS: |
| 84 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: cum |
| 85 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 86 | Half brick masonry 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 87 | Cement mortar 1: 3 ( 1 cement: 3 coarse sand ) |
| 88 | Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand) |
| 89 | FLOORING: |
| 90 | 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement . 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume ,hardcning compound is mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete |
| 91 | Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement |
| 92 | 18 mm thick |
| 93 | SANITARY INSTALLATION |
| 94 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap. 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handlo lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 95 | White Vitreous china Orissa pattern W.C. pan of size 580 x 440mm with integral type foot rests |
| 96 | Providing and fixing white vitreous china flat back or wall corner type lipped Iront urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with utomatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete. including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 97 | Range of four urinal basins with 10 litre while P.V.C automatic flushing cistern |
| 98 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 99 | White Vitreous China Wash basin size 630x450 mm with a pair of each15 mm C.P,brass pillar taps |
| 100 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete. |
| 101 | Providing and fixing PTMT liquid soap container 109 mm wide, 125each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 102 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 103 | Providing and fixing PTMT urinal cock of approved quality and colour. |
| 104 | 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. |
| 105 | MRS 2022 Additional items |
| 106 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge. |
| 107 | 75 mm dia |
| 108 | 110 mm dia |
| 109 | WATER SUPPLY: |
| 110 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc. |
| 111 | 15 mm diameter |
| 112 | 20 mm diameter |
| 113 | 25 mm diameter |
| 114 | Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. External work |
| 115 | 32 mm diameter |
| 116 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 117 | 15 mm diameter |
| 118 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confcrming to 1S.8931. |
| 119 | 15 mm diameter |
| 120 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 121 | 25 mm diameter |
| 122 | Providing and fixing gun metal non-return valve of approved quality (screwed end) |
| 123 | 32 mm diameter |
| 124 | horizontal |
| 125 | Providing and placing on terrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 126 | RO UNIT |
| 127 | Supply ,Testing andCommissioning ofwallMounted seconday R.O. Plant of 50 LPH capable to deliver Output water at TDS150 PPMFor LABS. System to include all valves , switches, sockets, pipes, reject water management,connections and accessoriesto make the system complete and functioning. |
| 128 | SH: Providing of Internal ElectrificationInstallation. |
| 129 | SUB HEAD-1: WIRING IN STEEL CONDUIT |
| 130 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recesed steel conduit with modular type switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 131 | Group A |
| 132 | Group B |
| 133 | Group C |
| 134 | Power Plug wiring in steel conduit (2x4mm2) |
| 135 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed stel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 136 | Circuit/Sub-Main wiring in steel conduit |
| 137 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 138 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 139 | 2X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 140 | 2 X 10 sq. mm + 1 X 10 sq. mm earth wire |
| 141 | SWITCHES AND ACCESSORIES |
| 142 | 5/6 Amp switch |
| 143 | 15/16 amps switch |
| 144 | 3 pin 5/6 amp socket outlet |
| 145 | 6 pin 15/16 amps socket outlet |
| 146 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 147 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 148 | S/F MODULAR BOXES BASE AND COVER PLATE |
| 149 | 1 or 2 Module (75mm X 75 mm) |
| 150 | 4 Module (125mm X 75mm) |
| 151 | 12 Module ( 200mm X 150mm) |
| 152 | S/F SP MCB DB |
| 153 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 154 | 12 way double door |
| 155 | S/F MCB Isolator |
| 156 | S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as reqd. |
| 157 | 43 amp |
| 158 | 63 amp |
| 159 | S/F "B" series SP MCB |
| 160 | Supplying and fixing 5 amp to 32 amp rating 230 V "B" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc as reqd |
| 161 | Single pole |
| 162 | S/F RCCB in cubical panel board |
| 163 | P/F (following rating) RCCB in existing cubical panel board i/c drilling holes in cubical panel making connectiobn etc as reqd |
| 164 | 40 amp Two pole RCCB 100 mA/300mA |
| 165 | EARTHING |
| 166 | Earthing with copper earth plate 600mm X 600mm X6mm thick i/c accessories and providing masonry enclosure with ver plate having locking arrangement and watering pipe etc. (ut w/o charcoal or coke and salt) as reqd. |
| 167 | BUS BAR CHAMBER |
| 168 | S/F Bus bar chamber with 4 strips copper bus bar of length 900mm suitable for 400 amp capacities complete with all accessories i/c connection earthing the body etc as reqd. |
| 169 | Laying of 1 No.PVC insulated PVC sheathed power cable of 1.1KV grade of size not less than 25 sqmm drect in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc as reqd |
| 170 | FIXTURES/FITTINGS |
| 171 | S/F 48"" sweep (1200mm) A.C.Ceiling fan complete with down rod canopy 3 (three) blades but without regulator etc as reqd.(Make Bajaj/Usha or similar) |
| 172 | S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd. |
| 173 | S/F bx type lminaries suitable for surface/pendent mounting FTL 2X36X40W complete with all accessories I connection etc as reqd. |
| 174 | S/F Pre coated electronic box type luminaries with decorative end cas FTL 1X36/40 W lamp complete with accessories i/c connections etc as reqd |
| 175 | S/F surface mounting luminaries FTL 2X36/40 complete with all accessories /i/c conection etc as reqd.(BJSM 02 -236/240) or Equivalent |
| 176 | Providing of Video Display Management System for INA Memorial Museum at Moirang, Bishnupur District, Manipur |
| 177 | Supply, Installation, Testing & Commissioning of 65 inches Non Touch Display DLED back light (IPS), Aspect Ratio 16:9 Contrast Ratio 5000:1,3840x2160 display Resolution 600 cd/m2 or higher Brightness, 8 bit-16 million display colour, HDMI x 3, RGB/VGA x 1, Audio x 1, CVBS(AV) x 1, PC slot x 1, RS 232x1 input ports, HDMI x 1, Audio (Earphone out) x 1, SPDIF x 1, RS232x1 Output ports, USB 2.0 Type A x 4, USB 3.0 Type A x 2, Dedicated USB Based Camera Port, RJ45 x 1 Giga LAN Port for Communication, 2.1 Stereo Sound with in-built 20 Watt x 2 speakers and 15 Watt x 1 Sub-Woofer, Horizontal 178 degrees, Vertical 178 degrees viewing Angle, 4 Way Split Screen content sharing software make clause |
| 178 | Supply, Installation, Testing and Commissioning of Signage software (IT Room Server) ( For same display on 13 screens) Full transparency and layering, simple drag and drop type process, Unlimited free-style zones, Features extensive fule format support and delivers smooth playback, Advance tickers and scrollers, Grouping support for players, Resume Capability of Data transfer-Eliminates the need to transfer files from scratch after network breakdown, One click Emergency Alerts, Multiple format content playback |
| 179 | Supply, Installation, Testing & Commissiong of DellPower Edge 14G (IT-440) Intel Xeon Silver 4110 (11 MB Cache & 2.1 GHz)/ 1x16 GB / 1x600 GB SAS 10K 2.5 " Hard drive / RAID 0,1,5 Controller H 730 p +2MB Cache/ 2x495W RPS in-Built/3 Years Onsite Warranty |
| 180 | Suuply and wiring along with UTP 4 pair CAT-6 Ethernet Cable and 25 mm diameter PVC Conduit Pipe (2mm thickness) (Approximate) |
| 181 | Supply, Installation, Testing & Commissiong of HDMI Splitter 1 in 8 Port Out of Full HD Support 1080 4K & 2K |
| 182 | Supply, Installation, Testing & Commissioning of HDMI Extender, 60m : Port HDMI Extender Over Single UTP CAT5e/CAT 6 cable up to 60m |
| 183 | Supply, Installation, Testing & Commissiong of 4K HDMI Cable 1 Mtr |
| 184 | Fire Alarm System for INA Memorial Museum at Moirang, Bishnupur District, Manipur |
| 185 | Fire Hydrant System |
| 186 | Above Ground Piping, removal obstructions as required Including fixing, fitting, interconnection |
| 187 | a) of pipe with 150 NB MS Pipe |
| 188 | b) -d0- with 100 NB MS Pipe |
| 189 | c) -d0- with 80 NB MS Pipe |
| 190 | Under Ground Piping, including excavation of trenches, removal of obstructions, laying and refilling of earth including interconnection as required with 150 NB MS Pipe |
| 191 | Supply and fixing /fitting of Hydrant Valve |
| 192 | Supply and fixing /fitting of Male female Coupling |
| 193 | Supply and fixing/fitting RRL hose |
| 194 | Supply and fixing/fitting Branch pipe |
| 195 | Supply and fixing/fitting Hydrant Box |
| 196 | Supply and fixing/fitting Hose Reel Drum |
| 197 | Supply and fixing/fitting Ball Valve, 25 NB |
| 198 | Supply and fixing/fitting Butterfly Valve, 100 NB |
| 199 | Supply and fixing/fitting Supply of Butterfly Valve, 80 NB |
| 200 | Providing of MS structural support |
| 201 | Pump House Piping including laying/fixing/fitting, Including interconnection |
| 202 | a) with 150 NB MS Pipe |
| 203 | b) -do- with 100 NB MS Pipe |
| 204 | c) -do- with 80 NB MS Pipe |
| 205 | d) -do- with 25 NB MS Pipe |
| 206 | Supply, Fixing, fitting of Jockey Pump |
| 207 | Supply, Fixing, fitting of Main Pump |
| 208 | Supply, Fixing, fitting of Diesel Pump |
| 209 | Supply, Fixing, fitting of Exhaust Pipe |
| 210 | Supply, Fixing, fitting of Automatic Panel |
| 211 | Wiring in casing capping/conduit |
| 212 | Supply, Fixing, fitting of Butterfuly Valve, 100 NB |
| 213 | Supply, Fixing, fitting of Butterfuly Valve, 80 NB |
| 214 | Supply, Fixing, fitting of Switch Type NRV, 100 NB |
| 215 | Supply, Fixing, fitting of Supply, Fixing, Fitting of Switch Type NRV, 80 NB |
| 216 | Supply, Fixing, fitting of Pressure Switch |
| 217 | Supply, Fixing, Fitting of PressureGauge |
| 218 | Supply, Fixing, Fitting of Y Strainer , 100 NB |
| 219 | Supply, Fixing, Fitting of Y Strainer , 80 NB |
| 220 | Supply, Fixing, Fitting of Foot Valve, 100 NB |
| 221 | Supply, Fixing, Fitting of Foot Valve, 80 NB |
| 222 | Supply, Fixing, Fitting of Sluice Valve, 150 NB |
| 223 | Supply, Fixing, Fitting of Sluice Valve, 100 NB |
| 224 | Supply, Fixing, Fitting of Wafer Type NRV, 100 NB |
| 225 | Supply, Fixing, Fitting of Four way inlet |
| 226 | Supply, Fixing, fitting of Air Vessel |
| 227 | Supply, Fixing, fitting of Air Release Valve |
| 228 | Fire Alarm System |
| 229 | Supply installation testing and commissioningof 1 Loop, networkable, microprocessor basedintellegent Analogue AddressableFire Alarm Control & Indicating Panel, expandable to two loop, each loop can be capable of handling minimum 99 addressable detectors and 99 addressable device with 24 V SMF battery backup, charger circuit and 80 character LCD display module etc. |
| 230 | Supply, Installation, testing and commissioning of Analogue Addressable Photo Electric Smoke Detector with mounting , base, having protocol compatability with Item No.(1) |
| 231 | Supply, Installation, testing and commissioning of Analogue Addressable ManualCall point, having protocol compatability with Item No. (36) |
| 232 | Supply, Installation, testing and commissioning of Analogue Addressable Fire Alarm sounder cum strobe, having protocol compatability with Item No.(36) |
| 233 | Supply, Installation, testing and commissioning of Short Circuit Fault IsolatorModule, having protocol compatability with Item No.(36) |
| 234 | Supply and drawing of 2 C x 1.5 Sq.mm & shieled tinned copper wire |
| 235 | Supplying and laying of 25mm MS Conduit with accessories |
| 236 | Installation of Security System (CCTV) |
| 237 | 16 Channel NVR (Upto 16 Video/Audio Support 4 Sata upto 5MP) |
| 238 | IP Network Camera (8 MP Bullet/Dome 4MM Lens Camera) |
| 239 | IP Network Camera (4 MP Bullet/Dome 4MM Lens Camera) |
| 240 | IP PTZ Network Camera ( 2 MP 30 X 20 X IR PTZ DOME Camera Upto 120 m IR Distance, 1920* 1080 P Full HD ) |
| 241 | POE LAN Switch (4 port/10/100) |
| 242 | HDD (4TB Survellence) |
| 243 | LED TV (40"" Inches Full HD TV) |
| 244 | Cable (CAT-6 LAN Cable) |
| 245 | Installation and Accessories (Laying Cable, Configuration & Camera Setting) Etc. |
| 246 | Metal Detector (Multi Zone Door Frame Metal Detector, 18 Zone) |
| 247 | HandHeld Metal Detector (Super Scanner) |
| 248 | Fire Alarm System (Fire Alarm Set) |
| 249 | Installation |
| 250 | 250 Watts power amplifier( 6 MIC & 2 AUX Input Amplifier) |
| 251 | 10 Watts Power Amplifier (1 AUX INPUT Audio Set with Speaker) |
| 252 | Audio Channel Selector(16 Channel 16 Audio Support) |
| 253 | Wall Speaker( 6 Watts Speaker) |
| 254 | Cable (2Pair Speaker Cable) |
| 255 | Accessories & Laying Cable set |
| 256 | Renovation of INA Auditorium Hall, Moirang, Bishnupur District, Manipur |
| 257 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumps ing ground within 50metres lead. |
| 258 | With cement mortar(1 cement: 4 coarse sand) |
| 259 | Dismenteling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 m leads of |
| 260 | G.S. Sheet |
| 261 | Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 262 | Dismantling cement asbestos or other hard board ceiling or partition sqm 31.98 walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 263 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead |
| 264 | Of area 3 sq. metres and below. |
| 265 | Of area beyond 3.00 sqm |
| 266 | Filling availabte excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layerby ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 267 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping Of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins. rafters and trusses and including cutting to size and shape wherever required. |
| 268 | 0.63 mm thick with zinc coating not less than 275gm/sqm. |
| 269 | Providing ridges or hips of width 60 cm over all width plain G.Sshcot fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I limpot and bitumen washers complete. |
| 270 | 0 63mm thick with zinc coating not less than 275gm/m2. |
| 271 | Providing and fixing 15 mm thick densified tegular edged eco sqm. 2,142.89 friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main"T runner suitably placed at joints to get required length and of size 24 x 33 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross of size 24 x 2B mm made from 0.33 mm thick (minimum) sheet, 1200 mm long spaced between main"T" at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary cross "T" of size 24 x 28mm made from 0.33 mm thick (minimum) sheet to be interlocked at the middle of the 1200 x 600 mm panel to form grid of size 600 x 600 mm, resting on periphery walls, partitions on a Perimeter wall angle pre-coated steel of size (24 x 24 s 3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to with 25mm long dry wall screws @ @230mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including Cutting/ makingopening for services like diffusers, grills.light fittings, fixtures, smoke detectors etc., wherever required. Main runners to be suspended from ceiling using Gil. slotted cleats of size 25 x 35 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mrn G.l. adjustable rods with galvanisod steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main"T, bottom exposed with 24 mm of all T sectiond shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawing and as directed by Engineer-in-Charge |
| 272 | WOOD WORKS |
| 273 | Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately. |
| 274 | a) Local best quality Teak Wood |
| 275 | Providing and fixing panellod or panollod and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 276 | a) Local best quality Teak Wood |
| 277 | 35 mm thick shutters |
| 278 | Providing and fixing paneling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling tor panelled or panelled and glazed shutters 25 mm to 40 mm thick |
| 279 | Local best quality Teak wood |
| 280 | 25 mm thick plank walling (Tothao local best quality) and Tolhao wood beading 62mrn x 12mm i/c fitting and fixing with necessary screws and nails complete (frame work to be paid separately). |
| 281 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete. |
| 282 | 250x10 mm |
| 283 | 150x10 mm |
| 284 | Providing and Fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete |
| 285 | 125 mm |
| 286 | 100 mm |
| 287 | Providing 40x5 mm flat iron hold fast 40 cm tong including fixingto frame with 1 Omm diameter bolts, nuts and wooden plugs and embedding in cement concrete block x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 288 | Applying one coat of cement primer of approved quality on wall surface. |
| 289 | water thinnable cement primer |
| 290 | finishing walls with Acrylic smooth exterior paint of required shade : |
| 291 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm). |
| 292 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. |
| 293 | Polishing on wood work with ready made wax polish of approved brand and manufacture |
| 294 | New work |
| 295 | Providing and applying two coats of fire retardant paint unthinnedon cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. |
| 296 | 1Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 297 | Providing and fixing mirror of superior glass (of approved quality) and of required Shapo and sizo with plastic mouldod framo Of approved mako and shado with 6 mm thick hard board backing |
| 298 | Rectangular Shapo 453x357 mm |
| 299 | SH: Audio Aid System for Audiotorium |
| 300 | Supply, Intallation, testing and commissioning of line array elements with dispersion patter Horizontal :75; Vertical : depending on array length and configuration (Per Box Vertical 15-20), frequency response 55Hz-20 KHz +- 4dB (1 box), power handling 700 W AES/ 1400W continuous, sensitivity of 104db (1w/1m), with a maximum SPL of 137 dB Peak, 12" Neod LF driver, 1x1.4" exit HF compression driver, constructed with 16mm birch plywood or better Acoustically transparent reticulated foam. Make & Model No.: TECNARE ALIS 15 |
| 301 | Line Array sub elements, frequency response 35 Hz-400 Hz (1box) or better, power handling 1200 AES/2400W continuous, sensitivity of 98 dB (1W/1m) witha maximum SPL of 129 dB continuous, 18" Lfdriver with constructed with 18mm birch plywood Make & model No. TECNARE SW 118M |
| 302 | Hanging line array speakers & sub as required make : Custom made |
| 303 | Stage monitor speaker, Two way Coaxial Monitor speake, LF 15|" (190mm ferrite magnet) woofer, 76mm (3 in) voice coil, HF 1.75" Compression driver with 26mm throat, Feq 60 Hz-18KHz +- 3dB, power 500W (AES), Dispression 110 Hx110 V, Sensitivity 95dB, Max S.P..L 127 dB (Peak/1M), Impedence 8 Ohm, 2xNL4MP speakon, Construction 18mm Grade A Multilayer High Density Plywood , Make & Model No : SWITCH AUDIO PRO150 |
| 304 | Audio Digital loudspeaker manager including 2 audio inputs and 6 audio outputs electronically balanced, 24 bits-48 KHz, USB interface and 2 volume remote control ports (0-10 VDC), full DSP, labels edition, password protected, system templates, 20 presets, Fully configurable from PC via control software make & Model No:ECLER ALMA26 |
| 305 | 4 channel power amplifier with a max output power of 4x1670 Watt & 4 ohm; 4x1220 Watt & 8 ohm, with frequency response of <20 Hz to >20 KHz, 4 Ohms, -1dB, with interchannel crosstalk of better than 75 dBr at 1 KHz and -5dBr at 20 KHz, THD <0.5% (20 Hz to 20 KHz), Input voltage rage of 180V to 250V, Protection against short circuits, no-load, on/off muting, RF interference Make & Model No: TECNARE PA 4-1500 |
| 306 | Surround Fill speakers speaker, Dipersion pattern 70"H x 50"V @-6db points. Rotable horn allows swap of horizontal and vertical pattern, frequency response 45 Hz-18KHz ± 4 dB, measured on axys, power handling 350W nominal/700W continuous, sensitivity of 947 dB (1w/1m), with a maximum SPL of 126 dB Peak, 1 x 10" LF driver, 1 x 1" exit HF compression dirver on a rotable exponential horn, constructed with 16mm birch plywood or better Acousticallly transparent reticulated foam Make & Model No: TECNARE IBZA 10 |
| 307 | Front/Down fill speaker : Dipersion pattern 80 H x 80 V @ -6dB point, frequency response 52 Hz - 20 KHz 4 dB, measured on axys, power handling 350 W nominal/700W continuous, sensitivityof 93 dB(1 W/1m), with a maximum SPL of 122 dB peak, 1 x 6.5" LF driver, 1 x 1.25" Tweeter HF driver, constructed with 16mm birch plywood or better Acousticallly transparent reticulated foam. Make & Model No: TECNARE IBZA6 |
| 308 | 2 channel power amplifier with a max output power of 2 x 900 Watt @ 4 ohm/ 2 x 700 watt @ 8 ohm/1 x 1980 watt @ 8 ohm bridge, with frequency response of <20 Hz to 20 KHz, 4 ohms, -1dB, with interchannel crosstalk of better than 75 dBr at 1 KHz and -58dBr at 20 KHz, THD<0.5% (20 Hz to 20 KHz), input voltage rage of 180v to 250V, protection against short circuits, no-load, on/off muting, RF interference. Make & Model No TECNARE PA 900 |
| 309 | 2 channel power amplifier with a max output power of 2 x 450 Watt @ 4 ohm/ 2 x 350 watt @ 8 ohm/1 x 900 watt @ 8 ohm bridge, with frequency response of <20 Hz to 20 KHz, 4 ohms, -1dB, with interchannel crosstalk of better than 75 dBr at 1 KHz and -58dBr at 20 KHz, THD<0.5% (20 Hz to 20 KHz), input voltage rage of 180v to 250V, protection against short circuits, no-load, on/off muting, RF interference. Make & Model No TECNARE PA 2100- |
| 310 | GREEN ROOM & FOLD BACK SPEAKER, Dipersion patter 80H x 89V @ 6dB point, frequency response 90 Hz -20 KHz+- 3dB, measured on axys, power hanling 50 W nominal /100 W continuous, sensitivity of 92.5dB (1w/1m), with a maximum SPL of 113dB Peak, 1x6.5" LF driver, 1" Tweeter HF driver. Made of reinforced ABS, 8 ? and 70/100 v line operating switch, IP54 class outdoor rating, protective front grill with anti-rust treatment. Make & Model No : ECLER AUDEO106 |
| 311 | 2 channel power amplifier with a max output power of 2 x 150 Watt @ 4 ohm with frequency response of <20 Hz to 25 KHz, with interchannel crosstalk of better than 55 dB at 1 KHz , THD<0.5% (1 KHz full power), Input voltage rage of 180v to 250V, protection against short circuits, no-load, on/off muting, RF interference. Make & Model No ECLER EGPA2-150 |
| 312 | 32 channel Analog mixer with built in effects make & Model No. YAMAHA/ALLEN & HEATH/BEHRINGER |
| 313 | UHF handheld Headset Wireless System, System: Simultaneous Channels: up to 10, System: Analog/Digital: Analog, System : Frequency Range: 548-572 MHz, System : Operating Range : Up to 250 ft. Line-of-sight, system: Channel selection : Auto, Microphone : Type : Condenser, Microphone : Polar Pattern : Cardioid, Microphone : Max SPL :150 dB SPL, Microphone : Frequency Response :50 Hz-16 KHz Make & Model No : SENHEISER XSW 1 ME3 |
| 314 | UHF handheld Headset Wireless System, Modulation Widebank FM, Frequency RangeA : 548 to 572 MHz, Switching bandwidth up 24 MHz, Signal to Noise Ratio = 103 dBA, Total Harmonic Distortion = 0.9% Temperature Range Operation : 32 to 104°F ( 0 to + 40° C), TransmitterSynchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) Reciever Principle Double superheterodyne, Diversity Antenna switching diversity via internal antennas, Sensitivity < 3 µvat 52 dBA RMS S/N (at peak diversion), Frequency response 50 Hz to 16 KHz (-dB), Max output voltage at Peak deviation, 1 KHz AF, 1/4" (6.3 mm) jack socket (unbalance) : + dBu XLR socket (balanced) : +12 dBu, Adjustment Range Audio :45 dB, adjustable in 5-dB steps, Squelch Adjustable from 3 dB µV to 28 dBµV ( combined with pilot tone), Line/Mic level 20 dB, switchable, Material of Construction ABS housin make and Model No: SENHEISER XSW XSW 1-825 |
| 315 | Condenser gooseneck microphone, with a perfect profile for message, speech and conferencing applications. Total length = 55 cm / 21.7". With anti-pop wind-screen cover. Polar pattern, Cardioid, frequency response 50 Hz - 16 KHz, Ouput impedence 250? ± 30% (at 1 KHz), Polar pattern : cardioid, Sensitivity -38 dB ± 3dB (0dB = 1V/Pa at 1 KHz), Phantom Power: 18-48V , Desktop connection base with standard XLR connector, it includes ON/OFF switch that enables /disables the microphone signal, Make & Model : ECLER EMCN2 + EMBASE |
| 316 | Handheld Cardioid Dynamic Microphone, Frequency response 50 Hz - 14 KHz, Output impedance 600? ± 30% ( at 1 KHz), Polar pattern cardioid, Sensitivity - 53dB ± 3 dB( 0dB=1V/Pa at 1 KHz), ON/OFF switch Make and Model No: ECLER EMMH1 |
| 317 | 8 channel audio distribution amplifier Make & Model No: BEHRINGER ULTRALINK PRO MX 882v2 |
| 318 | High- Definition 31-Band Stereo Graphic Eqaulizerwith FBQ Feedback Detection System Make & Model No: BEHRINGER ULTRAGRAPH PRO FBQ 200 HD |
| 319 | Closed Equipment Rack with front and rear lockable door, glass/PVC front door, caster wheel, power strip Make : Custom |
| 320 | Supply of Microphone Stand Big Make : GS |
| 321 | Junction boxes with connectors terminal strips, Make Custom |
| 322 | Digital microphone cable for stage for microphone etc. Make: XRYSTAL/SW |
| 323 | 8 pair microphone Snake cable for stage for microphone in existing conduit pipe/cable try etc. Make : XRYSTAL/SW |
| 324 | Supply of Microphone Stand Big Make : GS |
| 325 | Control UTP Cat 6 cable Make Kramer/Extron/Falcon/MOLEX/AMP/DLINK |
| 326 | Power cable 4.0 sq.mm, make : ANY |
| 327 | Various audio connectors Make : Neutrik/MX/Amphenol/ bestnet |
| 328 | Cable Tray/ Raceways/Junction box/PVC conduit / microphone box as per requirement |
| 329 | 10 KVA online UPS with 15-20 Minutes backup complete with SMF batteries Make : NUMERIC |
| 330 | SH: Stage lighting and Cyclorama System for Auditorium |
| 331 | PAR 64, 1000 W sealed Beam, Housing CRC sheet, 3200 K color temperature, CRC sheet metal with matt black colour paint finish, with holder and reflector including clamp for hanging. Make : DLMC/NSC/PLS/BSM |
| 332 | Profile spot 750w HPL Lamp, Four stainless-steel shutter blades assembly, Rugged and grace full die-cast aluminium construction, Power 220v /50Hz, Lamp 220vHPL750w G9.5, Color temperature 3200K, Available-19*26*/36* field angles with 3 core copper wire with 15 amp plug Make : PLS/DLMC/NSC/BSM |
| 333 | Wall washer for Cyclorama, LED : 36x3W High Power RGBW, Control System : DMX 512, Power consumption : 165 watt , Beam Angle: Wide, Operating Voltage : 90-264 V AC/24V, DMX Channel: 4 Channel Dimmer -0-100 percent (smooth fade in) Make : New stage craft/pro-lux,/canra/BSM/NSC |
| 334 | RGBW LED PAR Light with 54 x 3 W high power LED"s (14R, 14G, 14B, 12W), 100-120V and 200-240V AC, 50/60Hz (200W@ 220V), Master/slave synchronization, DMX512 control. Make: PLS/Robe/Chauvet/A-PRO Lighting satan/NSC/BSM |
| 335 | LED strobe Light DMX control Make : PLS/Chauvet/Elation/NSC/BSM |
| 336 | Moving Head sharpy 17R, Voltage :90-250V/50-60Hz, Ballast: Electronic ballast, Lamp :17R, 330W lamp, Colour Temperature :7800+-300K, Average life : 2000 Hours, Color : basic colour wheel with 6 dicronic mirros + white, Gobo:11 rotation gobo+ white, Prism : 3 facet bilteral rotation prism, focus : liner adjustment focus, Dimmer :0-100% linrt adjustment, Beam :4-class beam adjustment, Strobe: Double lens strobe (0.5-14 time/second, Motor: 11pcs mute sound motor, Pan/till"540*/271*, Channel 24CH. Make :PLS/Chauvet/NSC/BSM |
| 337 | Fog machine 3000Watt Make: PLS/Elation/Chauvet/BSM/NSC/ATAR |
| 338 | Wall mount 18 channel electronic three phase dimmer, phase monitoring, control signal monitoring, lamp pre-heat level selector for longer lamp life etc. Make: DL&MC/NSC/MSS |
| 339 | Individual control of up to 36 DMX x 512 units. 48 DMX channels for each unit. 512 DMX configurablechannels for intellegent units and dimmers, 48 program processor with 48 scenes each one (2304 total scenes). 48 Built in editable Effects. 144 Registers with 1 program + 1 Chase + 1 Effect + 1 Preset. 2 Bank of 12 faders to control 144 Dimmer channels. RS-232 for connection with a PC. DMX 512 /1990 standard ouput (5 pole female XLR connector). SD CARD slot for data backup. MIDI IN/TRHU/OUT. Built-in Wireless Wi DMX * transmitter, GRAPHIC white led backlight LCD PANEL. Very easy SETUP with wide LIBRARY, allows the configuration of each unit connected to the Matrix live. Control of the 48 channels by 12 faders for simplest use. Compatible with every DMX 512 unit ( max 48 channels) 8/16 bit PAN and TILT movements controlled by an auto-return joystick. MUSIC function with independent speed. Built-in microphone and 0 dB audio input with auto-level control. Values. 12 faders: to control the functions shown on the display. 1 Grand Master fader : general control of output levels. 6 function keys : to select the functions shown on the display. 1 Menu/OK key : accesses to menu/ok functions. 1 Esc key : to go back. 1 Manual key : to control unit. 1 joy speed key: Activate the moving joystick speed from 1 to 10 fixed or proportional type. 12 Multifunction keys : to select the functions shown on the |
| 340 | Stage dip box made of MS with hinge cover dully matt colour paint finish consistingof 2 nos 15 A plug/socket (Anchor/Havell or eq.) Make : Custom |
| 341 | MS light socket box 4"x4" with 15 Amp multi socket Make : Anchor/Havell or eq. |
| 342 | M.S. Pipe Ladders to be provided on sides of the stage to be fixed on the existing GI pipe or top grid. Made of 50mm x 25mm MS pipe of following Size : 1200x600 mm Make: Customize |
| 343 | DMX Splitter 6 channel Make : Lite Putter/Elation/PLS/BSM/NSC |
| 344 | Conduit cable tray as required for stage lighting |
| 345 | Power Cable 3 x 2.5mm Make : Finolex/Havell/Polycab/Krystal or eq. |
| 346 | Dmx cable : 3 x 2.5mm Make: Accu/PLS/Falcon |
| 347 | Various connector for stage lighting |
| 348 | SH: Acoustic Insulation System for Auditorium |
| 349 | Supply and Installation of high quality wall panelling wood slats, Wall Channeling with Glasswool filing of 50mm and all required accessories. |
| 350 | Supply and installation of Armstrong or Absound mineral wool tile of size 600x600x19mm suspended by using properietary supplied ceiling suspension system to consist of 2 mm or 3mm GI suspension rod/wire with adjustable Butterfly. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
