Food Corporation Of India-FCI has published Tender For Replacement Of Old Ac Gi Sheet Of Godown No 8,10 And 11 With Profile Sheet And Other Minor Repair Works At Fsd Harduaganj. Submission Date for this Tender is 11-09-2023. Godown Tenders in Aligarh Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Aug-2023 | Non applicability of undertaking related to MSEs as for 2012 for the Tender Notice No. CE/02/2023-24 dated 25.08.2023 | Other | 11-09-2023 |
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Taking out old wind ties from roof including cutting out rusted bolts nuts etc and removing materials to any distance within compound and stacking. |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of : AC Sheet. |
| 4 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of : G.S. Sheet |
| 5 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 7 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 8 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) |
| 9 | Fixing old wind tie with new fittings including painting two or more coats with anticorrosive bituminastic paint of approved brand and manufacturee over and including priming coat of ready mixed zinc chromate yellow yellow primer of approved brand |
| 10 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. |
| 11 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep without chase cutting |
| 12 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase |
| 13 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 16 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 17 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) |
| 18 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) |
| 19 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. |
| 20 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick |
| 21 | White washing with lime to give an even shade : Old work (two or more coats) |
| 22 | Replacement of damaged AC sheets with old AC sheets in roofing including dismantling broken AC sheet up to any pitch and with polymer coated "J" or "L" hooks bolts and nuts 8mm dia G.I. plain and bitumen washers etc. complete (excluding the cost of rafters, purlins and trusses) including cutting sheets to size and shape wherever required.(AC sheets will be provided free of cost by FCI) |
| 23 | Fixing old ridges and hips in asbestos cement sheets roofing - Close fitting adjustable ridges.(Ridges will be provided free of cost by FCI) |
| 24 | Supplying Roof leakage arresting materials as per IS Specifications to Food Corporation of India FSDs including loading, unloading, transportation etc. complete as directed by the Engineer-in-charge.Bitumen hot sealing compound : grade A |
| 25 | Supplying Roof leakage arresting materials as per IS Specifications to Food Corporation of India FSDs including loading, unloading, transportation etc. complete as directed by the Engineer-in-charge.Shalibond CS |
| 26 | Supplying Roof leakage arresting materials as per IS Specifications to Food Corporation of India FSDs including loading, unloading, transportation etc. complete as directed by the Engineer-in-charge.Bitumen felt :Type 3 grade 1 |
| 27 | Labour charges for tightening of G, I, J or L hooks in AC sheet/ GI sheet roofing including removal of clotted bitumastic compound wherever necessary arresting roof leakage by applying bitumastic compound over J bolts including providing safety measures for the labourers to work at higher elevation viz., ropes etc., insurance coverage for labourers and hiring of required T&P complete (bitumastic compound, mising J bolt, bitumen/ GI washers etc., required for the work will be supplied by the department at free of cost). |
| 28 | Labour charges for laying tarfelt/ plastic felt sheet with shalibond over AC sheet roofing wherever necessary including providing necessary safety measures for the labourers to work at higher elevation, ropes etc., insurance coverage for labourers and hiring of requiring T&P complete (Tarfelt, shalibond required for the work will be supplied by the department at free of cost). |
| 29 | Repairing and Greasing of rolling shutters at the rate of 500 grams yellow cup grease of good quality each shutter after cleaning with Kerosene oil properly including tensioning of springs/ replacement of spring wherever required including replacement of damaged stripes and side koni complete and making easy push & pull operation and removing the top cover and refixing the same after greasing with all materials and labour etc., complete as directed by Engineer-in-charge. (This excludes the cost of spring and strips but including the cost of side koni). |
| 30 | Opening of rolling shutter and then welding and refixing including oiling, greasing and tightening of springs and cleaning of guide channel, springs etc. as per engg incharge |
| 31 | Supplying of spring of rolling shutter 27.5cm long manufactured from high tensile steel wire or required strength as per direction of Engineer-in-charge |
| 32 | Supplying of MS Pipe shaft for rolling shutters of size : 40mm dia with necessary holes and bolts etc i.e. ready to fix in R/shutter as per direction of Engineer-in-charge |
| 33 | Repair of jali gate including supplying of all required material, labour, tools and equipment ie sliding bolt, pintol, piecese of angle iron, gusset plate, welding etc. |
| 34 | Cleaning septic tank including the removal of sludge and disposal of the waste outside the depot premises at the authorized dumping ground by mechanical means as per direction of Engineer-in-charge. |
| 35 | Cleaning of internal drains including disposal of rubbish with all rubbish with all leads &lifts as per direction of Engineer-in-charge. Size of drain 0.60X0.60m or bigger size |
| 36 | Cleaning of internal drains including disposal of rubbish with all rubbish with all leads &lifts as per direction of Engineer-in-charge.Size of drain 0.30X0.30m (Average size) |
| 37 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared . |
| 38 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 39 | Providing and fixing 75 cm wide, 90 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes: 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 40 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 41 | CREDIT FOR:- Dismantled old G.I sheet ,G.I ridge,J orL hooks,GI washers and MS wind ties s as and where is basis including loading ,unloading and transportation outsideFCI premises Old GI sheets ,GI plain ridges,G.I J orL hooks with nuts,GI washers and wind ties. |
| 42 | CREDIT FOR:- Dismantled old AC Sheet as and where is basis including loading ,unloading and transportation outside FCI premises,AC Sheet |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
