Water Resources Department-WRD has published Tender For Estimate For Construction Of Ziledari Building And Renovation Of Existing Office Building Of Jalalabad Canal Sub Division Amirkhas. Submission Date for this Tender is 04-09-2023. Building Work Tenders in fazilka Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (CSR Itme No. 6.6) |
| 2 | Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres. (CSR Itme No. 6.8 a (ii) |
| 3 | Cement concrete 1:8:16 with stone ballast 20 mm gauge in foundation and plinth .(CSR Itme No. 10.7b (ii) |
| 4 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. (CSR Itme No. 11.7) |
| 5 | Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. (CSR Itme No. 10.27) |
| 6 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (CSR Itme No. 11.8 (i) |
| 7 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). (CSR Itme No. 9.1) |
| 8 | Centering and shuttering for sides and soffits of beam,beams, launching girders, bressumers, lintels. (CSR Itme No. 9.6) |
| 9 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (CSR Itme No. 9.8) |
| 10 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (CSR Itme No. 10.2) |
| 11 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete. (CSR Itme No. 18.18) |
| 12 | 12.5 mm thick cement plaster 1:4 (CSR Itme No. 15.9) |
| 13 | Cement pointing 1:3 deep variety. (CSR Itme No. 15.6) |
| 14 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. (CSR Itme No. 18.51 C) |
| 15 | Supplying openable steel windows, of standard rolled steel Z sections, joints mitered and Electrically flash-welded, with iron fittings including necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete(Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer. Above one sqm Area. (CSR Itme No. 18.20 b) |
| 16 | Fixing steel window in walls with lugs, embedded in 15cmx12cmx7.5cm of cement concrete block of 1:2:4 mix including cost of cement concrete for lugs. (CSR Itme No. 18.23) |
| 17 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (CSR Itme No. 18.25) |
| 18 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. (CSR Itme No. 18.27) |
| 19 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material. (CSR Itme No. 14.30) |
| 20 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). Size 600x600 mm. (CSR Itme No. 14.113a) |
| 21 | Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm. (CSR Itme No. 14.118a) |
| 22 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing.(CSR Itme No. 13.13(i) |
| 23 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 (CSR Itme No. 13.45) |
| 24 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 (CSR Itme No. 13.51) |
| 25 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified (CSR Itme No. 13.55) |
| 26 | Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item) (CSR Itme No. 13.74) |
| 27 | Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. (CSR Itme No. 13.75) |
| 28 | Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.)punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. (CSR Itme No. 16.69) |
| 29 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. (CSR Itme No. 16.10) |
| 30 | Finishing walls with water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (CSR Itme No. 16.13) |
| 31 | Wire Gauge Imported teak wood door shutter without springs housed in chowkats 35 mm Thick. (CSR Itme No. 17.11(vii) |
| 32 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position. 35mm thick. (CSR Itme No. 17.27 A iv) |
| 33 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). For shutter area above 0.50 sqm. (CSR Itme No. 17.23 (ii) |
| 34 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. (CSR Itme No. 16.15) |
| 35 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. (CSR Itme No. 16.16) |
| 36 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR Itme No. 16.17) |
| 37 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (CSR Itme No. 16.18) |
| 38 | Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc. (Teak Wood) (CSR Itme No. 17.25) |
| 39 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete. I.S.I Designation No. II (size of door 701mm to 850mm) (CSR Itme No. 17.43 (b) |
| 40 | Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket(shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp.switch with indicator (Modular accessories). (CSR Itme No. 34.01x(b) |
| 41 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc.,complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp.combined/ universal Socket (shuttered),6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material,cutting and filling up of chases (with finishing the surface):- Wiring fan point (With fan box) (CSR Itme No. 34.02 i(b) |
| 42 | Wiring light point .(CSR Itme No. 34.02 (ii) |
| 43 | Wiring call-bell point. (CSR Itme No. 34.02 (iii) |
| 44 | Wiring 6Amp. wall socket point. (CSR Itme No. 34.02(iv) |
| 45 | Wiring 16/20Amp. power plug control point. (CSR Itme No. 34.02 (vi) |
| 46 | REPLACEMENT OF WIRES, COVER FRAMES,MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Wiring fan point (Without fan box).(CSR Itme No. 34.08 (i)a |
| 47 | Wiring light point. (CSR Itme No. 34.08 (ii) |
| 48 | Wiring call-bell point.(CSR Itme No. 34.08 (iii) |
| 49 | Wiring 6Amp. wall socket point. (CSR Itme No. 34.08(iv) |
| 50 | Wiring 6Amp. Plug control comprising wall socket point. (CSR Itme No. 34.08(v) |
| 51 | Wiring 16/20Amp. power plug control point. (CSR Itme No. 34.08 (vi) |
| 52 | Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (48/0.20mm), 2Core. (CSR Itme No. 34.09(xii)d |
| 53 | Supply & erection of PVC Conduit Pipes(ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 20mm dia.(Flushed) (CSR Itme No. 34.12(ix) |
| 54 | Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed) (CSR Itme No. 34.12 (x) |
| 55 | Erection of Ceiling fan.(CSR Itme No. 34.28 i(a) |
| 56 | Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture.(CSR Itme No. 34.28 ii(a) |
| 57 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to equired colour or shade with nuts and screws etc. complete :250mm x 16mm. (CSR Itme No. 17.49 b) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
