Department Of Local Bodies has published Tender For Chauth Mata Temple Community Building And Renovation Work In Mandi Premises In Municipal Area Anta. Submission Date for this Tender is 20-09-2023. Building Work Tenders in Baran Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Sep-2023 | Date Corrigendum | Date | 11-09-2023 |
| 2 | 11-Sep-2023 | DateCorrigendum | Date | 14-09-2023 |
| 3 | 14-Sep-2023 | DateCorrigendum2 | Date | 20-09-2023 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m |
| 2 | Filling with locally available river sand at all levels including watering ramming consolidating and dressing complete including cost of sand |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 4 | Random rubble dry stone Kharanja (soling) under floor. |
| 5 | Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. |
| 7 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 8 | :Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 9 | Suspended floors, roofs, landings, balconies and access platform. |
| 10 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix) |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (As per design mix) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) |
| 13 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Hot rolled deformed bars |
| 14 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 16 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) |
| 17 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) |
| 18 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 19 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in colour, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 450 mm X 450 mm |
| 20 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. Second class teak wood 35 mm thick |
| 21 | Brass 150 mm floor door stopper (0.357kg) |
| 22 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeBirla/J.K./Nerolac or ISO. As per direction of Engineer in charge. |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shad. New work (two or more coats) over and including priming coat with cement primer. |
| 24 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 25 | Supplying and fixing at site, single piece solid stone element/statue/sculpture/Ornamental pillar etc. including moulding if any, made out by carving work in first class (Superior class) JODHPUR-PINK stone free from cracks, flaws & stains etc. with additional/required carving work (3-dimensional work) on stone element including Planning, developing, making base, carving work, polishing, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape-size & placement of approved drawing , finishing, surface treatment etc. coveringproperly till the date of opening/inauguration of site etc. The stone should be pre/post -treated with suitable chemical polish for maintaining original color and Ceramic surface treatment to be doneto avoid surface staining & effect of external weather condition, pollution & dust etc. Proto type model of element/statue/sculpture (fiber glass or plaster of Paris) may also be required of same shape, size and detailing, for which nothing be paid extra. Preferably, the single piece stone block shall be used for the particular element/statue/sculpture but if not possible, material from the same block/lot of stone, shall only be used for similarity & fine n hair line pasting/jointing shall be done with suitable material in such a way so that joint(s) be not visible from front site. Complete job in all respect including in-lay work if required, as per approved design & drawing under approval of project consultant, appointed for the project & as per directions of Engineer-In-Charge. Note: Payment shall be made as per cubical block size of largest O/O dimension of each finished part/full product in each direction from which the element/statue/sculpture etc. is prepared. Other masonry, concreting, steel reinforcement plastering etc. required shall be paid extra but metallic items such as copper/bronze/gunmetal pipes, nozzles etc of approved make etc., conduiting for water pipe line, electric line etc. or hole of desired shape n size, requiredfor fixing/installation or structurally etc. in any element shall be inclusive in the rate. |
| 26 | Providing and fixing 50 mm dia G.I. steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings including all material, labour. |
| 27 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 28 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet. Sand cast iron S&S as per IS: 3989. |
| 29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. |
| 30 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm |
| 31 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. |
| 32 | P.T.M.T. Soap Dish/Holder 138x102x75mm |
| 33 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. this includes testing of joints complete as per direction of the Engineer in charge. Internal work - Exposed on wall |
| 34 | 2025 (25 mm OD) pipe |
| 35 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. |
| 36 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. |
| 37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 38 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 39 | 25 mm nominal bore |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 41 | Providing and fixing rigid PVC Pipe (IS : 4985 mark) Class II (4 Kg./Cm2) approved quality / makeincluding jointing the pipe with solvent cement rubber ring and lubricant. |
| 42 | 160 mm dia |
| 43 | Providing and fixing rigid PVC Pipe fittings (IS : 4985 mark) of approved quality / makeincluding jointing the pipe with solvent cement rubber ring and lubricant. |
| 44 | Reducer110x75 mm |
| 45 | Plain Tee 110 mm |
| 46 | Door Tee |
| 47 | Bend45* |
| 48 | Bend87.5*110 mm dia |
| 49 | Door Bend (top side) |
| 50 | Door Cap |
| 51 | Pipe Clip |
| 52 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. |
| 53 | P. & F. 1st quality WVC Urinals (IS: 2556 mark) with 25mm dia GI waste pipe, dome couplings, concealed iron brackets or screws etc complete. Flat back(large) or Half stall size 590x375x390 mm |
| 54 | Providing and fixing W.V.C. (IS : 2556 Mark) Squatting Urinal of standard make complete including cutting & making good the floor. Size 600 x 350 mm |
| 55 | P. & F. CP Brass Urinal Flush pipe set complete with flanged brackets of approved make. For 3 Urinals |
| 56 | Construction of Chamber in all types of soil with 300 mm thk masonry in CM 1:6, 100 mm thk CC(1:5:10) in foundation 20 mm thk inside plaster in CM 1:6 finished with neat cement, 50 mm thk M-15 grade CC floor, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 m. Inside size 300x300x500 mm & 5 Kg CI cover with frame. |
| 57 | P & F UPVC SWR pipes Type B for Soil and Waste discharge system (IS:13592-1992 marked) of approved quality/make. 110 mm dia |
| 58 | Wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm FR PVC insulated unsheathed 1.1kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated copper earth conductor (IS:694) of approved make in double lock/ ISI marked single lock pvc casing capping & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers , making connections, testing etc. as required. (Group-1) |
| 59 | Medium point (up to 6 mtr.) |
| 60 | Long point (up to 10 mtr..) |
| 61 | Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed 1.1 kV grade flexible copper conductorand 1.5 sq.mm FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved makedouble lock/ ISI marked single lock pvc casing capping & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required On board |
| 62 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 25 mm (Group-1) |
| 63 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. (Group-1) |
| 64 | Double pole MCB 6 A to 32 A rating |
| 65 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (single phase) 8 Way (Group-1) |
| 66 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.(Group-1) |
| 67 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. (Group-1) |
| 68 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 10.0 Sq.mm 2 core (Group-1) |
| 69 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required(Group-1) |
| 70 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 71 | 25mm x 3mm copper strip |
| 72 | P & F of IP20 LED batten type light fixture made from CRCA sheet stlle housing suitable for mounting LED tube system (integral driver), Power consumption of 18W/36W, 1500/3000 lumens, system lumen efficiency 80 lm/ watt output, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K, 4000° K and 6000° K. 4’ LED Tube shape fixture 18W |
| 73 | P & F energy efficient direct fit (Retrofit) composite compact fluorscent lamp of energy saving labelling not less than 3 star in existing holder/ fixture as required. 18/20 Watt |
| 74 | P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 300 mm sweep(900/1400 RPM) (Group-1) |
| 75 | P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only) 1200 mm sweep |
| 76 | Supply and fixing of power plug point accessories on 18 SWG metal box of size 175×100×60mm on surface or in recessed with suitable size phenol laminated sheet cover including cost of 6 pin 16 amp switch and socket outlet making connection, testing, etc. as required. Group-I |
| 77 | SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering ofriser pipe, G.I./H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. |
| 78 | Providing and laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required 4.0 Sq.mm 3 core flat |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
