Military Engineer Services-MES has published Tender For Repair/ Maintenance Of Fire Hydrant System/ Fire Alarm System And Other Certain E/M Items And Repair/Maintenance Of Certain Water Supply Pipe Lines Of Various Sizes And Valves At Af Station Suratgarh. Submission Date for this Tender is 19-09-2023. Fire Alarm Systems Tenders in suratgarh Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 28-Aug-2023 | REVISED BOQ | BOQ | 12-09-2023 |
2 | 12-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-09-2023 |
Sl. No. | Item Description |
1 | BOQ (REPAIR/ MAINT OF FIRE HYDRANT SYSTEM/ FIRE ALARM SYSTEM AND OTHER CERTAIN E/M ITEMS ANDREPAIR/MAINT OF CERTAIN WATER SUPPLY PIPE LINES OF VARIOUS SIZES AND VALVES AT AF STN SURATGARH) |
2 | Disconnecting, dismantling and taking out the defective centrifugal pump set of capacity 75 HP Motor of Make “KIRLOSKAR" from foundation by opening of coupling, foundation bolts and spray painting with one coat of existing colour paint and writing SM/MES No with white paint including replacement of parts as per Item No 2 here-in-after and repair of parts as per item No 3 here-in-after including installing, commissioning and testing on full load, complete all as specified and directed by Engineer-in-Charge. Note : Spare parts and repair of parts shall be measured and paid seperately. |
3 | Supply only spare parts as under required in Srl item No.1.00 here-in-before complete all as specified and directed by Engr-in-charge:- |
4 | Supply only Centre ring. |
5 | Supply only ball bearing existing size. Make : NBC/ SKF/ ABL |
6 | Supply only pump motor coupling assembly with tyre. |
7 | Supply bearing bowl with ball bearing plate. |
8 | Supply coupling tyre only. |
9 | Repair to parts of pump required in Ser item No-01 above here-in-before, complete all as specified and directed. |
10 | Remetalling, Turningand grinding to pump shaft. |
11 | Repairing to bearing housing. |
12 | Repair to impeller seat. |
13 | Cutting to impeller shaft key way and fixing of lock nut. |
14 | Repair to motor cooling fan shaft. |
15 | Disconnecting, dismantling and taking out the defective centrifugal pump set of capacity 30HP to 40 HP Motor of Make “KIRLOSKAR" from foundation by opening of coupling, foundation bolts and spray painting with one coat of existing colour paint and writing SM/MES No with white paint including replacement of parts as per Item No 5 here-in-after and repair of parts as per item No 6 here-in-after including installing, commissioning and testing on full load, complete all as specified anddirected by Engineer-in-Charge. Note : Spare parts and repair of parts shall be measured and paid seperately. |
16 | Supply only spare parts as under required in Srl item No.4.00 here-in-before complete all as specified and directed by Engr-in-charge:- |
17 | Supply only CI Impeller |
18 | Supply only CI Gland plate. |
19 | Supply only Centre ring. |
20 | Supply only ball bearing existing size. Make : NBC/ SKF/ ABL |
21 | Supply only pump motor coupling assembly with tyre. |
22 | Supply bearing bowl with ball bearing plate. |
23 | Supply coupling tyre only. |
24 | Repair to parts of pump required in Ser item No-04 here-in-before, complete all as specified and directed. |
25 | Remetalling, Turningand grinding to pump shaft. |
26 | Repairing to bearing housing. |
27 | Repair to impeller seat. |
28 | Cutting to impeller shaft key way and fixing of lock nut. |
29 | Repair to motor cooling fan shaft. |
30 | Disconnecting, dismantling and taking out the defective centrifugal pump set of capacity 10/12.5 HP Motor of Make “KIRLOSKAR" from foundation by opening of coupling, foundation bolts and spray painting with one coat of existing colour paint and writing SM/MES No with white paint including replacement of parts as per Item No 8 here-in-after and repair of parts as per item No 9 here-in-after including installing, commissioning and testing on full load, complete all as specified and directed by Engineer-in-Charge. Note : Spare parts and repair of parts shall be measured and paid seperately. |
31 | Supply only spare parts as under required in Srl item No.7 here-in-before complete all as specified and directed by Engr-in-charge:- |
32 | Supply only CI Impeller |
33 | Supply only CI Gland plate. |
34 | Supply only Centre ring. |
35 | Supply only ball bearing (existing size) : NBC/ SKF/ ABL |
36 | Supply only pump motor coupling assembly with tyre. |
37 | Supply bearing bowl with ball bearing plate. |
38 | Supply coupling tyre only. |
39 | Repair to parts of pump required in Ser item No-07 here-in-before, complete all as specified and directetd. |
40 | Remetalling, Turningand grinding to pump shaft. |
41 | Repairing to bearing housing. |
42 | Repair to impeller seat. |
43 | Cutting to impeller shaft key way and fixing of lock nut. |
44 | Repair to motor cooling fan shaft. |
45 | Disconnecting, dismantling and taking out the defective centrifugal pump set of capacity 5/7.5 HP Motor of Make “KIRLOSKAR" from foundation by opening of coupling, foundation bolts and spray painting with one coat of existing colour paint and writing SM/MES No with white paint including replacement of parts as per Item No 11 here-in-after and repair of parts as per item No 12 here-in-after including installing, commissioning and testing on full load, complete all as specified and directed by Engineer-in-Charge. Note : Spare parts and repair of parts shall be measured and paid seperately. |
46 | Supply only spare parts as under required in Srl item No.10 here-in-before complete all as specified and directed by Engr-in-charge:- |
47 | Supply only CI Impeller |
48 | Supply only CI Gland plate. |
49 | Supply only Centre ring. |
50 | Supply only ball bearing (existing size) : NBC/ SKF/ ABL |
51 | Supply only pump motor coupling assembly with tyre. |
52 | Supply bearing bowl with ball bearing plate. |
53 | Supply coupling tyre only. |
54 | Repair to parts of pump required in Ser item No-10 here-in-before, complete all as specified and directetd. |
55 | Remetalling, Turningand grinding to pump shaft. |
56 | Repairing to bearing housing. |
57 | Repair to impeller seat. |
58 | Cutting to impeller shaft key way and fixing of lock nut. |
59 | Repair to motor cooling fan shaft. |
60 | Note : Any other small items required to make functional, such as nut bolts,washers, gaskets etc are deemed to be included in item rate. |
61 | Disconnecting & dismantling the defective single phase/Three phase induction motor squirrel cage of any make and of capacity up to 5 HP/7.5 HP 415 Volts, 50 HZ, 2850 RPM and rewinding the motor with super enamelled copper wire of first quality of existing size/gauge and weight including replacement of all insulation materials, varnish and all other petty items required to make motor functional and re-assembling the motorincluding installation commissioning and testing on full load complete all as specified and directed. Note:- (a)Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against the above items. (b)Cost of nuts, bolts, washers, connection plate, grease/ lubrication to bearing bushes etc, are deemed to be included in this item. (c)Old dismantled winding wire will be contractor property for which credit has been considered under schedule of credit. |
62 | Disconnecting & dismantling the defective single phase/Three phase induction motor squirrel cage of any make and of capacity up to 10 HP 415 Volts, 50 HZ, 2850 RPM and rewinding the motor with super enamelled copper wire of first quality of existing size/gauge and weight including replacement of all insulation materials, varnish and all other petty items required to make motor functional and re-assembling the motorincluding installation commissioning and testing on full load complete all as specified and directed. Note:- (a)Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against the above items. (b)Cost of nuts, bolts, washers, connection plate, grease/ lubrication to bearing bushes etc, are deemed to be included in this item. (c)Old dismantled winding wire will be contractor property for which credit has been considered under schedule of credit. |
63 | Disconnecting & dismantling the defective single phase/Three phase induction motor squirrel cage of any make and of capacity up to 30 HP TO 40 HP 415 Volts, 50 HZ, 2850 RPM and rewinding the motor with super enamelled copper wire of first quality of existing size/gauge and weight including replacement of all insulation materials, varnish and all other petty items required to make motor functional and re-assembling the motorincluding installation commissioning and testing on full load complete all as specified and directed. Note:-(a)Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against the above items. (b)Cost of nuts, bolts, washers, connection plate, grease/ lubrication to bearing bushes etc, are deemed to be included in this item. (c)Old dismantled winding wire will be contractor property for which credit has been considered under schedule of credit. |
64 | Disconnecting & dismantling the defective single phase/Three phase induction motor squirrel cage of any make and of capacity up to 75 HP 415 Volts, 50 HZ, 2850 RPM and rewinding the motor with super enamelled copper wire of first quality of existing size/gauge and weight including replacement of all insulation materials, varnish and all other petty items required to make motor functional and re-assembling the motorincluding installation commissioning and testing on full load complete all as specified and directed. Note:-(a)Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against the above items. (b)Cost of nuts, bolts, washers, connection plate, grease/ lubrication to bearing bushes etc, are deemed to be included in this item. (c)Old dismantled winding wire will be contractor property for which credit has been considered under schedule of credit. |
65 | Supply, Laying and testing MS pipes heavy grades (ERW/ Flanged steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 350 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road and footpath and making surface good as previous complete all as specified and directed. |
66 | Supply, Laying and testing MS pipes heavy grades (ERW/ Flanged steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 300 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road and footpath and making surface good as previouscomplete all as specified and directed. |
67 | Supply, Laying and testing MS pipes heavy grades (ERW/ Flanged steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 250 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road and footpath and making surface good as previouscomplete all as specified and directed. |
68 | Supply, Laying and testing MS pipes heavy grades (ERW/ Flanged steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 200 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road and footpath and making surface good as previouscomplete all as specified and directed. |
69 | Supply, Laying and testing MS pipes heavy grades (ERW/ Flanged steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 150 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road and footpath and making surface good as previouscomplete all as specified and directed. |
70 | Supply, Laying and testing MS pipes heavy grades (ERW/ Flanged steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 100 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road and footpath and making surface good as previouscomplete all as specified and directed. |
71 | Supply, Laying and testing MS pipes heavy grades (ERW/ Flanged steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 80 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road and footpath and making surface good as previousall as specified and directed. |
72 | Supply and fixing offire hydrant landing valve type A (single head outlet) gunmetalof 80 mm dialanding valve with 63 mm dia female outlet complete and 80 mm inlet with rubber blank cap and chain as per IS 5290-1983 ,suitable for brigade hose of 63 mm with couplings conforming to IS 903 complete all as specified and directed by Engr-in-charge. Yard Hydrant |
73 | Supply and fixing of fire hydrant landing valve type A (double head outlet) gunmetalof 80 mm dialanding valve with 63 mm dia female outlet complete and 80 mm inlet with rubber blank cap and chain as per IS 5290-1983 ,suitable for brigade hose of 63 mm with couplings conforming to IS 903 complete all as specified and directed by Engr-in-charge. Yard Hydrant |
74 | Taking outleaking hydrant valve of any size from any position,cleaning the same thoroughly and carrying out necessary repair like changing of leather,nuts, bolts,rubber packing etc with all fittings complete all as specified and as directed. |
75 | Taking down old unserviceable water tank of any capacity and Supply & fix Rotational moulded polyethylene water storage tanks of 5000 Ltr Capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engineer In charge. |
76 | M&L for complete servicing of 85 BHP, 1800 RPM diesel engine driven fire pump, removing all accessories required for repair/replacement, cleaning, washing of all the parts and reassembling after repair/replacement and commissioning testing on full load including complete replacement of engine oil, coolant and replacement of the following items:- |
77 | M&L for replacement of Air filter. M&L for replacement of luberication oil filters. M&L for replacement fuel filters. M&L for replacement of self starter assembly. M&L for replacement of 12V 130AH battery. M&L for replacement of complete wiring. M&L for replacement of battery charger. M&L for cleaning of fuel tank thoroughly M&L for cleaning of radiator assembly thoroughly Note: Any other item needed to make the diesel engine driven pump functional shall deemed to be included in quoted rate, so contractor is advised to make a visit to above said pump before quoting the rate. |
78 | Taking down old unserviceable mono block pump set of any size/capacity and supply, fixing, commissioning and testing of three phase monoblock pump set of capacity 5HP (50mmx65mm) as per site requirement complete all as specified and all as directed Make Kirloskar model No.KDS-538+ or Equivalent. |
79 | Taking down old unserviceable butter fly valve and material and labour for butter fly valvewith rubber packing of size 150 mm complete all as specified and directed. |
80 | Taking down old unserviceable butter fly valve and material and labour for butter fly valvewith rubber packing of size 100 mm complete all as specified and directed. |
81 | Taking down old unserviceable butter fly valve and material and labour for butter fly valve ofsize 80 mm complete all as specified and directed. |
82 | Taking up CI/DI/GI water mains 80 mm/100 mm dia from trenches (including all fittings), with spigot and socket ends and lead/tyton/flanged joints including burning out joints and recovering lead complete all as specified and directed. |
83 | S&F ductile Iron pipes of 100mm bore with spigot and socketed ends, Class “K-7”, suitable for and including rubber tyton joints complete all as specified and directed. Note:- Earthwork and excavation required shall be measured and paid under respective items. Existing GI connections are to be done in newly laid pipe including required clamp, ferrules etc, cost for the same shall be included in quoted rate. |
84 | Taking up existing DI pipe line of size 100 mm removing old unserviceable Tyton joint (push-on-joint) and supply , fixing and testing of new Tyton joint (push-on-joint) and relaying the pipe line complete all as specified and as directed. Note : 1.Excavation and eathwork shall be paid separately. 2.Incase existing DI pipe line damaged during taking up the same shall be replaced with new DI pipe of existing size. Rate shall be included in quoted rate. |
85 | Taking up existing DI pipe line of size 150 mm removing old unserviceable Tyton joint (push-on-joint) and supply , fixing and testing of new Tyton joint(push-on-joint) and relaying the pipe line complete all as specified and as directed. Note : 1.Excavation and eathwork shall be paid separately. 2.Incase existing DI pipe line damaged during taking up the same shall be replaced with new DI pipe of existing size. Rate shall be included in quoted rate. |
86 | Material and labour for DI specials such as tees, bends of any sizeand radius, tapers, collars, tail pieces, caps and plugs etc complete all as specified and directed. |
87 | Excavation in trenches not .exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundations, laying water mains, pipes, cables, etc getting out in soft/lose soil and forming bottom surface to required gradient complete all as specified and directed. |
88 | Returning filling in including spreading levelling, watering and well ramming in layer not less than 25 cm thick each layer complete all as specified and directed. |
89 | Removing excavated material to a distance not exc 50M anddepositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
90 | Dismantiling of pavers blocks/tiles of anydescription or thickness in floors aprons etc.laid dry or laid dry or pointed complete all as directed |
91 | M&L for 100mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
92 | M&L for 25 mm thick river sand layer spread uniformly over sub base complete all as specified and directed. |
93 | Fixing only retrived machine pressed precast concrete inter locking tiles/paver block any shape and size with grey cement and no pigment including filling the joints upto full depth with fine sand complete all as specifed and directed by Engr in charge. |
94 | Material and labour for cutting of road ,cutting chases pining in making good to facing where required to edges of landing road,hard standing,etc,and cutting chases for concealed water tubing making good exc 20 cm but not exc 60 cm width and digging of excavation40 cm but not exc 1m depth in bituminous road /concrete surface and making good as existing surface by using 0.63 mm hard core as required including premixed high performance cold mix patching material ideal for instant as require high quality repairs to bituminous as well as concrete surface all as directed by Engineer in Charge |
95 | Supply installation , testing and commissioning of adressable manual call point resettable typewith base complete all as specified and directed. |
96 | Supply , fixing and testing PVC insulated FRLS copper conductor cable twin core 1.5 Sqmm armoured 1100 Volts complete all as specified and directed. |
97 | Material and labour for rigid non metallic PVC concealed conduit 25 mm dia inclusive of all tees bends elbows reducer bell mounth tube ends and fixing accessories complete all as specified and directed. |
98 | Supply,Installation,Testing & Commissioning of remote response indicator complete as required as per technical specification.(NBG-12Lx) complete all as specified and directed. |
99 | Supply, fixing, testing and commissioning of Addressable type multisensor detector with heat and smoke combination Complying with and type certified to EN - 45 Addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed. |
100 | Taking up or down 20mm bore steel water tubing and connections laid in trenches/road/ nallah or fixed along walls complete all as specified and directed. |
101 | Taking up or down 25mm bore steel water tubing and connections laid in trenches/road/ nallah or fixed along walls complete all as specified and directed. |
102 | Taking up or down 40mm and 50mm bore steel water tubing and connections laid in trenches/road/ nallah or fixed along walls complete all as specified and directed. |
103 | Taking up or down 80mm bore steel water tubing and connections laid in trenches/road/ nallah or fixed along walls complete all as specified and directed. |
104 | Refixing of old steel tubing and connections of Galvanised Tube 20mm bore, with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc,complete all as specified and directed by Engineer-in-Charge. |
105 | Refixing of old steel tubing and connections of Galvanised Tube 25mm bore, with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc,complete all as specified and directed by Engineer-in-Charge. |
106 | S&F galvanised steel tubing 20 mm bore, "Medium grade",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc,complete all as specified and directed by Engineer-in-Charge. Note: Excavation and earthwork shall be measured and paid separately. |
107 | S&F galvanised steel tubing 25 mm bore, "Medium grade",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc, complete all as specified and directed by Engineer-in-Charge. Note: Excavation and earthwork shall be measured and paid separately. |
108 | S&F galvanised Tube 40 mm bore, "Medium grade",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc,complete all as specified and directed by Engineer-in-Charge. Note: Excavation and earthwork shall be measured and paid separately. |
109 | S&F galvanised Tube 50 mm bore, "Medium grade",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc, complete all as specified and directed by Engineer-in-Charge. Note: Excavation and earthwork shall be measured and paid separately. |
110 | S&F galvanised Tube 80 mm bore, "Medium grade",ISI marked as per IS 1239 part-I with all fittings ISI marked including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line in trenches/road/ nallah & fixed along walls/polls including mild steel clamps, screws etc,complete all as specified and directed by Engineer-in-Charge. Note: Excavation and earthwork shall be measured and paid separately. |
111 | Supply and fixing ofGun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 20 mm bore pipe, including taking down old unserviceable complete all as specified and directed by Engineer-in-Charge. |
112 | Supply and fixing of Gun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 25 mm bore pipe, including taking down old unserviceable complete all as specified and directed by Engineer-in-Charge. |
113 | Supply and fixing of Gun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 40 mm bore pipe, including taking down old unserviceable complete all as specified and directed by Engineer-in-Charge. |
114 | Supply and fixing of Gun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 50 mm bore pipe, including taking down old unserviceable complete all as specified and directed by Engineer-in-Charge. |
115 | Bacteriological Examination of waterfrom the institute as approved by GE including collection of water sample and submitting the same with institute/lab complete all as specified and directed by Engineer-in-Charge Note: The water testing parameter will be given by the AGE E/M |
116 | Chemical Examination of waterfrom the institute as approved by GE including collection of water sample and submitting the same with institute/lab complete all as specifiedand directed by Engineer-in-Charge Note: The water testing parameter will be given by the AGE E/M |
117 | Dismantiling of cast iron work of any description complete all as specifiedand directed by Engineer-in-Charge. |
118 | Supply and fixing joist channel angle or tee sections fixed independentely with out connecting plate etc of Fe-410 W Gde E-250 quality B complete all as specifiedand directed by Engineer-in-Charge. |
119 | Supply and fixing of plain or chequered channels squre cut or notched ordinary and counter sunk forming holes with riveted ,bolted or welded attachment FE-410W-( Gde-E 250 ) quality A for using pit cover, tank cover etc. complete all as specified and directed |
120 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quions arches pillars etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed |
121 | M&L for brickwork with subclass B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
122 | Preparation of old painted surface of MS/CI pipes such as rising main, distribution mains, washout and over flow pipes,MS covers of valve pit and canal drains and painting with one coat of synthetic enamel paint, as per colour code given by the deptt , complete all as specified and as directed by Engineer-in-Charge. |
123 | Preparation of new or previously untreated surface of MS/CI pipes such as rising main, distribution mains, washout and over flow pipes,MS covers of valve pit and canal drains and painting with one coat of synthetic enamel paint, as per colour code given by the deptt , complete all as specified and as directed by Engineer-in-Charge. (Note :- The rates includes for writing and marking description of pipes with white enamel paint) |
124 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces with 1:4cm complete all as specified and directed |
125 | Supply, fixing, testing and commissioning of CPVC Ball valveunion type of size 20mm including using elbow,union,tee,etc as per site requirement including removing old unserviceable valves complete all as specified and as directed. |
126 | Supply, fixing, testing and commissioning of CPVC pipes of size 20mm including using elbow,union,tee,etc as per site requirement including removing old unserviceable pipes complete all as specified and as directed. |
127 | Supply & fixing of CPVC fittings like elbow, union, Tee etc of size 20mm as per site requirement including removing old unserviceable fitting, complete all as specified and as directed. |
128 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail