Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-09-2023 | Date Corrigendum | Date | 22-09-2023 |
| 2 | 12-09-2023 | BOQ AMENDMENT | BOQ | 19-09-2023 |
| 3 | 05-09-2023 | Date corrigendum | Date | 19-09-2023 |
| Sl. No. | Item Description |
| 1 | Taking down complete existing roof /parapet treatment any thickness including plastering, leaping plaster of any thickness cuting & up rooting tree roots/Vegitable growth & removing the debris from the premises upto 500 m from the MOD land including cleaning/ washing down and keeping surfaces cleancomplete all as specified and as directed. |
| 2 | M & L for brushing neat cement slurry (@ 3 Kg of cement per Sqm) mixed with water proofing compound in the proportion ,water proofing compound, water and cement (1:4:7) or as per manufacturer\"s instructions for bonding of old concrete surface to new concrete, complete all as specified and as directed.(Note:Water proofing compound shall be measured and paid seprerately under respective item of \"BoQ\") |
| 3 | M & L for plain cement concrete 1:2:4 ,type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement as in padding, benching, sunken portion etc., on roof surface for correcting/making proper slope on roof, etc.,complete all as specified and directed. |
| 4 | M & L for cutting 75 mm wide and 65 deep in brick wall/PCC block/RCC surface any location shaping horizontal face groove filled with PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) with and including chemical compound mixed in proportion 200 mili litre per 50 Kg of cement or as per manufacturer\"s instructions laid when concrete is still green, complete all as specified and as directed.Note:Water proofing compound will be measured and paid seprerately under respective item of \"BoQ\". |
| 5 | M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound@ 200 ml/50 Kg per Bag of cement , finished, even and smoothwithout using extra cement over roof / sunken slab /wall complete all as specified and directed.Note:Water proofing compound will be measured and paid seprerately under respective item of \"BoQ\". |
| 6 | M & L for application of water proofing treatment using APP modified roof membrane over non accessible/non approachable RCC roof slab /chajjah/canopy /parapet wall( horizontal /vertical surface) to be executed through approved applicator of the membrane manufacturer/authorized applicatorof the manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly.(b) Applying approved bituminousbased primer( conforming to IS: 3384-1995) @ 0.30 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface &hot blown grade bitumen 85/25softning point 115 degree C @ 1.2 Kg/Sqm over primer .(c) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :-(i) Membrane weight not less than 3.00 Kg/Sqm. (ii)Non woven polyester weight not less than 160 gms/Sqm.(iii)Softening point of membrane not less than 150degree Celsius. (iv)Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N& transverse not less than 250N.(vi)Elongation of reinforcement not less than 30%.(vii) Impermeability under water pressure not less than 3 Kg/Sqcm.(d) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e) Applying two coat of bituminiousbased Aluminium Paint @ 0.3 Kg /Sqm over APP Membrane. |
| 7 | Supply only liquid water proofing compound ISI marked. complete all as specified and directed. |
| 8 | M& L for applying evenlya tack coat of industrial hot blown grade bitumen 85/25 @ 1.2 Kg/Sqm including cleaning of surface complete all as specified & directed. |
| 9 | S & F 50 mm bore GI tube, light grade as in spout pipe, complete with all fittings laid as in floor etc., complete all as specified and as directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the allrubbish off from the premises complete all as specified and directed. |
| 11 | M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed. |
| 12 | M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm/450 mmx 300 mm x7 mm thick,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tilesover & including 10 mm thickrendering in cement plaster in CM (1:4) complete all as specified and directed. |
| 13 | Dismantling of stone slabs of any description or thickness in floors, aprons etc laid,bedded & pointed in any mortarcomplete all as specified and directed. |
| 14 | M&L for machine cut kota stone slab flooring 20mm -25 mm thick of size not less than 575 mm X 575 mm, over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed. |
| 15 | M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 20 mm to 25 mm thicklaid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed. |
| 16 | M&L for machine cut 16-18mm thickwhite Marble stone flooring as in border,etc at kota stone flooring , laid over 20mmthick screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding grinding, rubbing & polishingcomplete all as specifed & directed. |
| 17 | M & L for rounding of edges of Kota/Cuddapah stone slab one edge, such as in steps, cooking platform and other similar work, complete all as specified and as directed. |
| 18 | Cutting chases, pinning in to in brick wall ,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girthcomplete all as specified and directed. |
| 19 | M&L for machine cut cudappah stone slab 20-25mm thick , including grinding, rubbing, polishing ,rounding to edges of stone slabs one edge, such as in Shelves, steps, cooking platform, and other similar situations complete all as specifed & directed. |
| 20 | Dismantling old Asbestos cement (plain ,corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified & directed. |
| 21 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed |
| 22 | Taking down chowkhats or frameswith shutter(without taking off shutter from the frames) of any description not exceeding 1.5 Sqm each, complete all as specified and directed by Engineer-in-Charge . |
| 23 | Taking down chowkhats or frameswith shutter(without taking off shutter from the frames) of anydescription exceeding 1.5 Sqmbut not exceeding4.0 Sqm each, complete all as specified and directed by Engineer-in-Charge . |
| 24 | Taking down shutters of any description exceeding 1.00 Sqm butnotexceeding 2.0 Sq m eachand refixing of shutter of any description in same opening, complete all as specified and as directed. |
| 25 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge. |
| 26 | S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all asfixing in the frame at site as per specification and drawing including 3 Nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed. |
| 27 | S&F for 1.25 mm thick pressed steel door frames of size 165mm x 60 mm for single or double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc with & including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed.Note: The quoted unit rate under this item shall deemed to be included one shop coat of primer. |
| 28 | S & F 35 mm thick, factory made, IInd class hard wood plain framed panelled door shutters (two panel) with lock rail and panel of 12 mm BWP commercial ply on both faces . The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed . |
| 29 | S & F 35 mm thick, factory made, IInd class hard wood glazed and skeleton shutters,open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members),beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etccomplete all as specified and directed . Note:- (i)Glass / wire cloth shall be measured & paid separately. (ii) Sample of shutter in sample room of GE office.) |
| 30 | S&F steel window with sidehung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or weldedwith four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx) & two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed |
| 31 | S&F steel window with sidehung shutters including projecting type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or weldedwith four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx)& two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed |
| 32 | S & F for steel windows or ventilators, fixed type, with glazing bars complete including prepartion ofnew or previously untreated steelsurface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 33 | M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165& for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed |
| 34 | M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors, window & similar work etc.including necessary form work complete all as specified and directed |
| 35 | S & F 100mm sizebutt hinges medium weight cold rolled stainless steel (SS) complete all as specified and directed |
| 36 | S & F 75 mm sizebutt hinges medium weight cold rolled stainless steel (SS) complete all as specified and directed |
| 37 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed. |
| 38 | S&F 125 mmaluminium alloy handles of extruted section type, anodisedcomplete all as specified& directed. |
| 39 | S & F aluminium sliding door bolts250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engineer-in-Charge . |
| 40 | S & F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 41 | S & F in repair for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 42 | Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames, glazed with oil putty or fixed with beads complete all as specified and directed |
| 43 | M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge . |
| 44 | S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangularnot exceeding 0.5 Sqm ineach pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beadingcomplete etc all as specified & directed. |
| 45 | S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hinge block shape door, window stops and the like including all necessary labours articles not exceeding200 cu.cm each complete etc all as specified & directed. |
| 46 | S&F mild steel 200 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed |
| 47 | S&F in repair18 mm / 19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws & favicol & other side balancing white laminationfor cupboard shutter, shelf, etc&where required as in cubical desk and cabinets including making holes with decorative covers for wires where ever required fixed to aluminum partition complete all as specified and directed. |
| 48 | S & F 35 mm width of flaps(when open) continuous piano hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 49 | M&L Chowkhat 2nd class hard wood andframes wrought , framed rebated on the solid rounded or chamfered , put together with glue pinned at joints complete all as specified and directed. |
| 50 | S&F mild steel cupboard shutter with frame as Godrej pattern ,made out of 22 gauge mild steel sheet including chromium plated mild steel handle with proper locking arrangement (brass mortice lock vertical type size 65mm ,4 livers with escutcheon plates & two keys )with and including two coats of spray painting with synthethic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolts 150mm long grouted in brick wall /concrete including makng good the disturbed surface as original complete all as specified and directed by Engineer-in-Charge. |
| 51 | M & L for preparation of new wooden surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 52 | M&L for prepartion ofnew or previously untreated steelsurface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 53 | S&F in repair Harrison rails curtain rod , anodised aluminium alloy with bracket etc.,complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc & removal of rubbish out offfrom site etc complete all as specified and directed. |
| 55 | Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out offfrom site etc complete all as specified and directed. |
| 56 | M&L for Brick work with sub class bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed. |
| 57 | M&L for rendering 15 mm thick on brick masonry/concrete surface etc incement mortar(1:6) surface finished even & smooth without using extra cement complete all as specified and directed. |
| 58 | M&L for rendering 15 mm thick on brick masonry/concrete surface etc in CM (1:4) ,mixed with water proofing compound , trowelled to fair finished even & smooth without using extra cement complete all as specified and directed.(Note:Water proofing compound shall be measured and paid seprerately under respective item of \"BoQ\") |
| 59 | M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as in ceiling , finished even and fair complete all as specified and directed. |
| 60 | M & L for preparation of newly plastered surfaces of wall& applying two coat of oil bound distemper (OBD) on wall surface over a coat of alkali resistant primer complete all as specified and as directed. |
| 61 | M&L for preparation of newely plastered surfaces of ceiling and applying three coat of white wash on new ceiling surface complete all as specified& directed. |
| 62 | M&L for preparation of newely plastered surfaces of wall and applying three coat of white wash on new wall surface complete all as specified& directed. |
| 63 | M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed. |
| 64 | Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engineer-in-Charge. |
| 65 | Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving exceeding 15cm thickness (below or above ground level) and removal of rubbish off from sitecomplete all as directed by Engineer-in-Charge. |
| 66 | M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushedstone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 gradeand sand in the ratio 1:3 including necessary form work , complete all as specified and directed. |
| 67 | M & L for cement concrete (1:5:10), type E-2 (using 40 mm graded brick aggregate) as in filling in sunken portion, sub-base, etc.,complete all as specified and as directed. |
| 68 | M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in kerb/benching/copings/window cill etc. including weathering,slightly rounded or chamfered angle and throating including use & waste of necessary form worketc complete all as specified and directed |
| 69 | Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from sitecomplete all as directed by Engineer-in-Charge. |
| 70 | M&L for precastreinforced cement concrete 1:2:4 ,type B-1 (using20 mm gradedcrushedstoneaggregate)as in kitchen platform, shelves , cover slab, etc. including necessary formwork complete all as specified and directed.Note : Reinforcementwill be measured & paid seperately under respective item of BOQ. |
| 71 | M&L for mild steelTMT bars 10 mm dia and over grade Fe -500 , asin reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed. |
| 72 | M&L for 18 to20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs,pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rubbing and rounding edges of slab etc.,over & including 15 mm thick rendering in cement mortar(1:4)etc including dismantling of exsting slab complete all as specifed and as directed. |
| 73 | S&F rotational moulded polythene water storage tank of capacity2000 ltrs (Cylindrical/ vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 25 mm bore GI nipple and20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)including taking down of existing tank complete all as specified and directed. |
| 74 | Disconnecting existing water tanks of capacity exceeding 500 Ltr but not exceeding 1000 Ltr, setting aside (or lowering, if required) for repairs, cleaning, etc.,and hoisting, if required for reconnecting and re-fixing in position complete all as specified and directed. |
| 75 | Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. |
| 76 | Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. |
| 77 | Taking up or down steel tubing and connections of 25 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. |
| 78 | S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed. |
| 79 | S&F for GI water tubing mediumgrade, ISI marked,galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chasees for brick wallsand making good the surfacein cement mortar 1:3 complete all as specified & directed. |
| 80 | S&F for GI water tubing mediumgrade, ISI marked,galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chasees for brick wallsand making good the surfacein cement mortar 1:3 complete all as specified & directed. |
| 81 | Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed. |
| 82 | Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed. |
| 83 | Refixing for 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed. |
| 84 | S & F in repair 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 85 | S & F in repair20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 86 | S & F in repair 15mm, concussive push button taps cast copper allow screwed down for iron pipe and fixed,complete all as specified and as directed. |
| 87 | S & F in repair angle cock of 15mm bore, chromium platedwith long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrulecomplete all as specified and directed. |
| 88 | S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered \"Hot\" or \"Cold\" with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed. |
| 89 | S & Fin repairs stop valve 15mm bore chromium plated fancy type,cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall with CP wall cap etc complete all as specified and directed. |
| 90 | S & Fin repairs brass chromium plated shower rose with swivel joints, 125 mm size in square with chromium platedlong shank arm including fixing to steel pipe or union complete all as specifed & as directed. |
| 91 | S & Fin repairslooking mirror of selected quality glass mounted on 6 mm thick ply wood & fixed and fixed to wooden plugs with CP brass screw and cup washers complete all as specified and directed. |
| 92 | S&F vitreous China WC squatting pan \" Orissa Pattern\" of size 580 mm X 440 mm white with integral foot rest including cast iron \"P\" or \"S\" trap, front or back inlet and making connection to trap & to flushing cistern completeincluding taking down existing pan & making good disturbed surfacecomplete all as specified &directed |
| 93 | S&Fin repair vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat coverincluding connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete all as specified and directed. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items. |
| 94 | Supply only plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 95 | S&F in repairvitreous China half stalltype (back to corner ) urinals with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)(back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe etc.complete all as specified and as directed |
| 96 | S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 450 mmcomplete all as specified and directed. |
| 97 | S&F in repair towel railbrass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flangesfixed with and including chromium platedbrass screw & wooden /plastic cleats complete set all as specified and directed. |
| 98 | S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed. |
| 99 | S & F in repairvitreous China wash basin, star white oval type size 560 mm X 410mmfixed on RCC slab including 32 mm brass chromium platedwaste coupling ,PVC 32 mm bore waste pipe, chromium plated Grating& making good disturbed surface with CM 1:3 complete all as specified and directed. |
| 100 | S & Fin repairshelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms), complete all as specified and as directed. |
| 101 | Cutting chases, pinning in to in brick wall ,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girthcomplete all as specified and directed. |
| 102 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces withpreparation ofplastered surfaces and apply two coats of distemper oil emulsion (OBD)over a coat of primer and a layer of putty (not less than 1.5 mm thick )complete all as specifiedand directed. |
| 103 | M & L for preparation of old decorated surfaces of ceilingincluding brooming down or steel wire brushing, scrapping down smokes sootmoulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of oil bound distemper on ceiling surface,complete all as specified and as directed. |
| 104 | M & L for preparation of old decorated surfaces of wall including brooming down or steel wire brushing, scrapping down smokes sootmoulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of oil bound distemper on oldwallsurface, complete all as specified and as directed. |
| 105 | M & L for preparation of old decorated surfaces of ceilingincluding brooming down or steel wire brushing, scrapping down smokes sootmoulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of white wash on ceiling surface,complete all as specified and as directed. |
| 106 | M & L for one coat of synthetic enamel paint to wooden surfacenot otherwise described over 10cm width or girthincluding preparation of old painted wooden surfaces complete all as specified and directed. |
| 107 | M & L for preparation of old treated surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint on steel surface complete all as specified and directed. |
| 108 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces withpreparation ofplastered surfaces and apply two coats of cement base paintover a coat of cementprimer complete all as specifiedand directed. |
| 109 | S & F in repair110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches ,floor complete all as specified and directed. |
| 110 | S & F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed |
| 111 | S & F in repair75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches ,floor complete all as specified and directed. |
| 112 | S & F in repair 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed |
| 113 | S&F in repair 75 mm PVC(SWR) bendsany radius complete all as specified and directed. |
| 114 | S&F in repair110 mm PVC(SWR) bendsany radius complete all as specified and directed. |
| 115 | S&F in repair 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 116 | S&F in repair 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 117 | S&F in repair 110 mmPVC (SWR) vent cowl complete all as specified and directed. |
| 118 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementwithchromium platedgratingwith or without hole complete all as specified and directed. |
| 119 | S & F 110 mm dia PVC(SWR) WC connector with lip ring, complete all as directed and as specified. |
| 120 | Taking down carefully unserveciable/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power includingunscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets ,light fittings etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed. |
| 121 | M&L forfollowing point wiringcontrolled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutralandincluding non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steelsheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminatedcover make sheet for housing/ fixingswitches etc.,including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etccomplete all as specified and directed.Note: Proper colour coding to be adopted. |
| 122 | (a) One light pointcontrolled by oneone way switch |
| 123 | (b) One fanpointcontrolled by oneone way switch |
| 124 | (c) One 3/5 pin socket outlet5 amp on same board with other switches |
| 125 | (d) One 3/5 pin,5 amp socket outleton independent board |
| 126 | M&L for point wiring FRLSH cable PVC for the 15 amp 3/5 pin socket power point controlled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 2.5 Sq.mm nominal cross sectional area for phase & neutralandincluding non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 2.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steelsheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminatedcover make sheet for housing/ fixingswitches etc.,including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etccomplete all as specified and directed. Note: Proper colour coding to be adopted. |
| 127 | M & L Sub main wiring with two runs ofsingle core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 SqmmPVC insulated unsheathedFRLSH multi stranded copper conductor cablefor earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia/appropriate dia with accessories & fittings complete and making good disturbed surface wall including taking down existing sub main wiring complete all as specified and as directed. Note : - Tworuns of 6.0 Sqmm cable andone run of earth wire 6.0 sqmm& conduit shall be measured as one unit length and extra length of cable required for connection to MCBs shall be deemed to be include in unit rate quoted by bidder. |
| 128 | S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed. |
| 129 | S & F socket outlet 2 in 1, 3 pin, 5Amp/6 Amp, flush type, universal, complete all as specified. |
| 130 | S & F ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified & as directed |
| 131 | S & F fan regulator electronic, step type hum free, socket type, suitable for ceiling fans of any capacity, pre wired 230 volts AC 50 HZ supply 100/120 Watt complete all as specified & as directed |
| 132 | S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified. |
| 133 | S&F in replacement 15 watt LED bulb PAG series B-22 base (ISI mark) ,three star rated lamp with all accessories complete all as specified and as directed. |
| 134 | S & F socket outlet 2 in 1, 3 pin, 5Amp/15 Amp, flush type, universal complete all as specified and as directed. |
| 135 | S & F switch piano flush button single pole one way 15 Amp/16 Amp,240 voltcomplete all as specified and as directed. |
| 136 | S & F LED tube light fitting 1 x 20watt , 220 V, AC, decorative box typewith driver ,holder includingLED tube lightsurface and wall mounted LED battenPVC housing with polycarbonatediffuserand integrated electronic driver complete with all accessories ,driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fittingcomplete all as specified and as directed. |
| 137 | S & F in repair LED mirror typelight fittings 1 x 9/10 watts integral slim LEDbatten with high out put diffuser 2 feet long,220 volt ,AC decorative type with driver holder & LED lamp & all other accessories duly pre wired and making connection with and including three core copper flexible wire from connectorto ceiling rose not less than 1 mtr fixed on wall with plastic gutties complete all as specified & directed. |
| 138 | S&F for distribution board (DB) made out of steel sheet metal enclosure (CRCA sheet) dust and vermin proof Triple pole and neutral(TPN) 6 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar 415volts ,flush to wall including taking down carefully existing unserveciable /old main switches, DBS along with MCBs complete all as specified and directed. |
| 139 | S& F 415V 10KA \"B\" curve miniature circuit breaker (MCB) of TPN/FP 40 amp to 100 amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 140 | S & F in replacement of double door SPN distribution boards steel sheet powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 415 Volts 200 amps rated busbar 8 way complete all as specified and directed. |
| 141 | S & F in replacement of double door SPN distribution boards steel sheet powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 415 Volts 200 amps rated busbar 4 way complete all as specified and directed. |
| 142 | S & F miniature circuit breaker (MCB) SP 6 to 32 Amps (\"B\" Series) having current rating 10 KA,240 Volt in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 143 | S & F miniature circuit breaker (MCB) double pole40 Amps (\"B\" Series)ISI marked having current rating 10 KA,240 Volt in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 144 | M&L for Earthing complete for poles/DBs with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in theground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below normal ground level connected to galvanized iron wire 4mm diaas earth leadby means of bolts, nuts and washers of GIup to test point,GI tubing20mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel & wire mesh,charcoal dust and common salt 15cm in layers all round the earth plate, 40 mm thick pre-cast RCC cover (1:2:4) type B-1(using 20 mm graded crushed stone aggregate )reinforced with 8mm dia TMT bar @ 75mm c/c both way with mild steelhandle 20mm dia round bar , plastering 15mm thick with CM (1:6:) internally and upto 150mm below ground level externally and chamber of (size of pit 300 mm x 300 mm x 300mm internal diamentions) PCC (1:3:6) type C-1(using 20 mm graded crushed stone aggregate ) (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m & returning filling) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I includingtaking down old/ unserveciable existing earthing& making good disturbed surface of wall ,floors etc.complete all as directed. Notes: -(i)Earth lead & protection pipes length upto & including 7.50 metre.(ii)Earth filling shall be done by vegetable soil.(iii)Soil should be free from stone, boulders, aggregate, gravels etc. |
| 145 | Supply, laying , jointing & testing LT under ground cableXLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured, electric power cable ( heavy duty) with standard aluminium conductor , 1100 Voltsgrade of cross sectional area25 Sqmm 3.5 coreincluding taking down of existing unserveciable/old cable complete all as specified and directed. |
| 146 | S & F in repair 40 mm bore GI tube, light grade with all fitting for cable protection including clamp ,nut,bolts & washer etc complete all as specified and as directed. |
| 147 | Excavation in trenches in any type ofsoil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient forlaying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed. |
| 148 | Returning, filling in including spreading, leveling, watering and well ramming in layers ofnot exceeding 25 cm thickafter the cables & pipes etc. are laid, jointed & testedand foundations complete all as specified and directed by Engineer-in-Charge. |
| 149 | Removal of surplus excavated soilnot exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 150 | Supply and spreading clean, dry, fine river sand for under groundelectric cable in two layers (8cm thick before laying of cable & 15cm thick after laying cable to a total of 23cm) including gentle punning the sand upto 18cm (total thickness)and consolidated around cable for protection of UG cable complete all as specified and directed.NOTE:- For measurement purpose punned thickness shall beconsidered as per clause 19.75 of SSR Part-I. |
| 151 | Supplying & Laying factory made un-reinforced pre-cast flat concrete cable protection cover of class LV , type- I, size 250 mm x 150mm x 40mm,complete all as specified and directed by the Engineer-in-Charge. |
| 152 | S & F building security lights with new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaries with high power LEDs as light source & exclusively designed polycarbonate cover along with electronic drivertype street light fitting 35/36 watt capacity LED and including allnecessary accessories duly pre-wired, fixing on bracket with nut, bolts & washers as required at site for fixing of street light on LT pole/ wall complete including taking down old / unserveciable security lights fitting any type and description complete all as specified and directed. |
| 153 | S & F in repair bracket made out of 40 mm dia GI pipe light grade 1.20 mtr long bend to shape as per site requirement fixed to pole /wall with40mm x 5 mm size flat iron clamp -02 Nos,nuts &bolt of 12 mm dia 100 mm long with washer etc duly paintedapplying two coats of synthetic enamel paint over a coat of red oxide primeron mild steelexposed surfaceincluding prepartion ofnew or previously untreated steelsurface of any description,not otherwise described over 10 cm in width or girth complete all as specified & directed. |
| 154 | S & F in repair 1X9 W/1X10 Wwatt LED Bulkhead fitting with IP 65 environmental frendly, ultra modern, energy saving mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LED 230 Volts AC circuit connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engr-in-Charge. |
| 155 | Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/M Ramgarh complete all as specified and as directed. |
| 156 | Refixing ceiling fan after rewinding of ceiling fans of various makes of size 1200 mm /1400 mm sweep from working on 230/250 volt single phase AC supply and re-winding with supper enamelled new copper wire of appropriate gauge including varnishing with good quality varnish\" baking up, reassembling the fan, testing including replacement of connector and repair/ replacement of bearing, flexible wire of size 23/0.0040 three core up to one metre complete all as specified and as directed. Note : Cutting of winding coil of exhaust fans shall only be done in presence of Engineer-in-charge. |
| 157 | Refixing ceiling fan aftergreasing of bearing , reassembling the fan, testing including replacement of connector, and repair of Bearing, flexible wire of size 23/0.0040 three core up to one metre complete all as specified and as directed. |
| 158 | Taking down exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan for repair and cutting of existing winding of exhaust fans of 300 mm /450 mm sweep and rewinding with same/suitable size super enamelled copper winding wire and including insulating the same with super enamelled varnish,bush/bearing and painting one coat ofsynthetic enamelled paint after preparation of old surface and testing complete all as specified & directed by Engineer-in-charge. Note : Cutting of winding coil of exhaust fans shall only be done in presence of Engineer-in-charge. |
| 159 | Boring ofhole under road, pavement, hard standing without disturbing existing surface by trenchless technology using ultra sound technique and necessary machine complete all as specified and directed by Engineer-in-Charge.Note : Pipes shall be laid minimum 1.00 mtr below/under existing road surfaces/taxi track / apron /floors etc.complete all as specified and as directed. |
| 160 | S & F in repair for High density polyethylene (HDPE) pipe of 40 mm dia sutable for 6 Kgf / sq.cm working pressure complete all as specified and directed by Engineer-in-Charge. |
| 161 | S & F in repairfor High density polyethylene (HDPE) pipe of 20 mm dia sutable for 6 Kgf / sq.cm working pressure complete all as specified and directed by Engineer-in-Charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
