Road And Building Department-RBD has published Tender For Renovation, Restoration And Beautification Of Chandaneswar Temple, Bhogarai In The District Of Balasore For The Year 2023-24.. Submission Date for this Tender is 04-09-2023. Temple Tenders in balasore Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the` direction of the Engineer-in-charge. |
2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
3 | Earth work in excavated earth from work side for filling and carriage of earth by mechanical means with averagelead of 5km including loading and uncloading at road alignment including dressing and levelling & approved profile complete as per direction of the Engineer-in-charge |
4 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
5 | Providing G.S.B.Gr-IV materials, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density, as per approved Drawing & Technical Specifications and as per Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
6 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction ofEngineer-In-charge. |
7 | 300mm dia 6.0 mtr long Single Under ream Pile foundation with RCC-M20 using 12mm size black hard granite chips including cost of boring but excluding cost of MS/Tor steel and labour charges for cutting , bending and binding of steel. |
8 | 300mm dia 3.0 mtr long Single Under ream Pile foundation with RCC-M20 using 12mm size black hard granite chips including cost of boring but excluding cost of MS/Tor steel and labour charges for cutting , bending and binding of steel. |
9 | Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres |
10 | Carriage of Dismentaling materials from work site to out side with in 8 km lead and lift including all labour as per direction of the Engineer-in-charge |
11 | Providing & applying Post constrution of Antitermite treatment by drilling 12 mm dia holes at a distance of 30cm@ junction of wall and floor about 300mm apart deep enough to each the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with475 ltr water) pumped these holes to soak the soil @1Ltr solution of each holea as per manufactures specification and the holes should be pluged with filling materials including cost of all materials,labour charges,conveyance and all taxes and hiring charges of machinaries as per direction of Engineer in charges. |
12 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm sizeblack broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. |
13 | Providing and laying cement concrete grade M15 using nominal size coarse granite aggregate conforming to Table 1000-1 infoundation, complete including formwork as per section no. 1000, 1500,2100 of specification for road & bridge works of Ministry Of Road Transport & Highways ( 4th revision ) & direction of Engineer -in-Charge. |
14 | Providing and laying cement concrete grade M20 using 20 mm nominal size coarse granite aggregate conforming to Table 1000-1 infoundation, complete including formwork as per section no. 1000, 1500,2100 of specification for road & bridge works of Ministry Of Road Transport & Highways ( 4th revision ) & direction of Engineer -in-Charge. A) Drain Raft |
15 | B) Drain Wall |
16 | Providing and laying cement concrete grade M20 using 20 mm nominal size coarse granite aggregate conforming to Table 1000-1 infoundation, complete including formwork as per section no. 1000, 1500,2100 of specification for road & bridge works of Ministry Of Road Transport & Highways ( 4th revision ) & direction of Engineer -in-Charge. |
17 | Brick work with K.B. Bricks having crushing strength between 100kg/cm2 to 149kg/cm2 in Cement mortar(1:6) in foundation & plinth. |
18 | First class Fly ash Brick masonry usingbricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
19 | First class Fly ash Brick masonry usingbricks of size 23 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Ground Floor |
20 | Cement concrete (1:2:4) with 12mm hard granite chips(Crusherbroken) per 1 cum for RCC works including hoisting & laying(To be used for minor repair work only.) |
21 | RCC work of M-20 grade with 20mm& down-grade size black hard granite(crusher broken) chips including hoisting&laying.(Data for 15 cum. |
22 | A) Grade Beam |
23 | B) RCC Slab |
24 | C) RCC Column |
25 | D) Statue top Slab |
26 | E) Raft |
27 | F) RCC Wall |
28 | RCC work of M-25 grade with 20mm& down-grade size black hard granite(crusher broken) chips including hoisting&laying.(Data for 15 cum. as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
29 | a) Pile cap |
30 | b) Grade Beam |
31 | c)Column up to Pl |
32 | d) Column up to slab |
33 | e) Lintel |
34 | f) Chajja |
35 | g) RCC Beam |
36 | h) RCC Slab |
37 | Cutting straightening coiled bent up HYSD bars bending , binding , welding and jointing if necessary and tying the grills and placing in position as required for R.C.C work and for providing fan hooks hoisting lowering and tyingincluding cost , conveyance and taxes ofHYSD barsand binding wires 18 to 20 gauge required for the work and bending binding and tying the grills(payment will be made tow wards the weight of binding ware) . complete as perdirection of the Engineer-in-charge. Ground Floor |
38 | 12mm thick Cement plaster (1:4) over brickwork with neat Cement punning for skirting including curing etc. complete. |
39 | 12mm thick Cement plaster (1:6) for brickwork including curing etc. complete including curing etc. complete. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Ground Floor |
40 | 16mm thick Cement plaster (1:6) over brickworkincluding curing etc. completeincluding curing etc. complete. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Ground Floor |
41 | 6mm thick Cement plaster (1:4) finished smooth per 1 Sqm.including curing etc. complete including curing etc. complete. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Ground Floor |
42 | 25 mm thick rubbed Sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. |
43 | Painting 2 coats with any approved paint on new/old work plaster surface including cost of paint & labour. |
44 | Finishing wall surfaces with Acrylic wall putty (Water based) of approved make and finished smooth and even surfaces to receive painting including cost of all materials taxes, labour T&P etc. |
45 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) weather seal coat exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
46 | Wall painting 2-coatswith plastic emulsion paint of approved shade on newwork 1coats to give an even shade excluding cost of paint. |
47 | Painting on concrete surface Providing and applying 2 coats ofwater based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. |
48 | 25 mm thick rubbed Sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. |
49 | Supplying & fixingG.I Grills made out of G.I Angle, Square bars & flatsetc including the cost of materials and labour including grouting of existing column and wall holes etc all complet as per the direction of Engineer in charge. |
50 | Rough stone dry masonry with sand grouted for the walls with hard granite stones as per approved Drawing & Technical Specifications and as per Section -1400 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete |
51 | Gravel backing to revetments as per approved Drawing & Technical Specifications and as per Section 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete. |
52 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm@ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specificationetc all completed. |
53 | Providing Weep holes in guard wallsusing 100 mm dia AC pipe including 40mm agreegate block of size300x300x300mm behind the weep hole complete as per drawing andas per clause no.2706 of specification for road & bridge works of Ministry of Road Transport & Highways ( 4th revision ) & direction of Engineer - in- Charge. |
54 | Supplying and fixing of pre-cast kerb Stone of size 600mmx300mmx150mm of M-30Grade of approved make, design, Colour and size made by Block making machine with proper compaction fixed in required pattern etc Complete in all respact |
55 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. |
56 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). |
57 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) |
58 | Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing 2 nos M.S. sheet rings 50 x 0.5 mm fixed with rivets complete in all respects including painting inside and outside of tree guard with: |
59 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. |
60 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). |
61 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer in charge. (The cost of good earth, earthen pots & manure will be paid separately.) |
62 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge |
63 | Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. |
64 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. |
65 | Providing and wartering of plants through water tanker of Horticulture features i.e. lawn, tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit. capacity with one labour for watering i/c cost of water, filling of tanker, wartering at site with all leads and lifts as per direction of officer-in-charge. |
66 | Anti termite treatment by digging holes 300mm deep and 40 mm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.as per direction of officer-in-charge. |
67 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge. |
68 | Cleaning and Sweeping of Lawn / Garden area and keep it neat and clean by mechanized method / manually, remove litter,debries, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin / designated place, as per direction of officer -in- charge (All T & P, materials / articles shall be provided by the contractor.) |
69 | Providing and displaying of Araucaria cookie plant, having ht. 1.80 m to 1.95 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
70 | Providing and displaying of Areca Palm plant, having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
71 | Providing and displaying of Croton Golden specimen plant, having ht. 90 cm to 1.05 cm with 5 to 6 branches, well developed, fresh and healthy foliage in 30 cm size of Earthen pot/Plastic pot as per direction of the officer-in-charge. |
72 | Providing and displaying of Livistona palm plant, having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot . as per direction of the officer-in-charge. |
73 | Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
74 | Providing and displaying of Seaforthia Palm plant, having ht. 1.50 m to 1.80 m with 12-15 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
75 | Providing and Displaying Chrysanthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot and as per direction of the officer-in-charge. |
76 | Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type plant well developed in 50 cm Cement Pot as per direction of the officer-in-charge. |
77 | Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. |
78 | Providing and Displaying Mimulus multi branching bushy plant in different colour well developed fresh & healthy in full bloom in 20 cm Earthen Pot in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
79 | Providing and Displaying Mesembry anthemum in different colour well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
80 | Providing and Displaying Ranunculus Hybrid variety in different colour specimen 5-6 plants in each Pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand as per direction of the officer-in-charge. |
81 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
82 | Electrical installation Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V modular type switch ISI marked and modular ceiling rose ISI marked mounted on modular MSbox having front modularcover plate of suitable size, modular MSbox with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-as approved by PWD Odisha) Group-AL.P. |
83 | S/F of 6 Amp modular switch and socket on existing board |
84 | S/F of 16 Amp modular switch and socket on separate board |
85 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL etc.as approved by PWD Odisha) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
86 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
87 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
88 | Supply and fixing of following way double pole/ triple pole steel MCB distribution board 240/400 V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-(as approved by PWD Odisha) 12 way double door SP DB |
89 | 63 Amp 100 mA DP RCCB |
90 | 5amp-32 Amp SP mcb B/C series |
91 | S/F of 20 watt LED Tube Light(make- as approved by PWD Odisha) |
92 | S/F of ceiling fan 48" (make- as approved by PWD Odisha) |
93 | S/F of ceiling fan modular regulator (make- as approved by PWD Odisha) |
94 | SUPPLY AND FIXING OF 1no. of cubicle panelof 2mm thick CRCA panel box of follwing dimensuion:-1 m x 1 m(30 cm depth)= 1sqmtrin complete fabrication of metal clad,powder coated,compartmentalised cubicle panel as per CPWD Electrical specification including insulated busbars,supports,interconnections,erection of switchgears and making provisions of incoming/outgoing cables etc.- |
95 | S/F of Ammetter (0 to 500A) with selecter switch including Make- AE all accessories, Make - A.E./L&T/C&S or equivalent |
96 | S/F of Voltmeter(0 to 500A) with selecter switch including all accessories, Make - A.E./L&T/C&S or equivalent |
97 | S/F ofIndicator lamp with toggle switch and fuse. Make- A.E./L&T/C&S or Equivalent |
98 | S/F of C.T. Coll upto 400/5amps including all connection. |
99 | S/F of 250 Amp DU250 36 KA 4 Pole MCCB with adjustable setting thermal range of 200-250 Amp (L&T/C&S/HPL or equivalent) |
100 | S/F of 100 Amp DU100H Type 30 KA 4 PoleMCCB with adjustable setting thermal range of 80-100 Amp. (L&T/C&S/HPL or equivalent) |
101 | Provision for cable glands,lugs, cable marker etc. |
102 | 6 sqmm. 2 core cable |
103 | 10 sqmm. 4 core cable |
104 | 95 sqmm. 3.5 core cable |
105 | Cable laying up to 25 sqmm. Cable in ground with brick, sand and refilling including excavation work etc. complete in all respect. |
106 | Cable laying up to 120 sqmm. Cable in ground with brick, sand and refilling including excavation work etc. complete in all respect. |
107 | 10 sqmm. 4 core cable |
108 | 95 sqmm. 3.5 core cable |
109 | Supply of 6 inch GI Jindal make pipe |
110 | S/L of 3 mtr. Long 40 mm dia G.I. Standard Earthingwith saltand charcoal complete in all respect including cover plate etc. for system earthing |
111 | S/L of 25 mm x 5 mm G.I earth strip in ground |
112 | Supply and installation testing and commissioning of 30 Watt LEDall in one solar street light with 48 Wp ±4 Wp (MONO) 18 V solar panel , 905x365x55 mm dimension, 50000 hrs LED Life with PIR Sensor and IP65, 12.8 Volt 30 Ah battery LiFePO4, MPPT charge controller, Hybrid (AC-DC) , lm/watt 150 lm, 6000K-6500K color temperature, net weight 13.25 kg installation height 6-7 mtr, with all accessories (Make- Bajaj/ Crompton/ Philips/Havells or equivalent make) |
113 | Supply and installation testing and commissioning of3 mtr led 45W post top lantern |
114 | Supply & fixing of loop in loop out junction box with all material (SP MCB 6 Amp 1 no., 4 way bakelite connector01 no., bakelite board - 01 no., 2.5 sqmm PVC insulated single core multistrand copper wire complete in all respect |
115 | Water proof Timer Panel for Street Light Control(3 nos) 2mm thick CRCApannel box 0.6m X 0.75m (30cm depth)= 0.45 sqmtsq. incomplete fabrication of metal clad, powder coated, compartmentalised cubical panel as per CPWD Electrical specifications including insulated bus bars, supports, interconnection, erection of switchgears and making provisions for termination of incoming/outgoing cables/ bis ducting etc. |
116 | S/F of 4 pole 63 amp, 30KA MCCB (make-as approved by PWD Odisha) |
117 | S/F of Rotary Handle Selector Switch (make-as approved by PWD Odisha) |
118 | S/F of 2 Position symmetric head selector switch (make-as approved by PWD Odisha) |
119 | S/F of Push Button (make-as approved by PWD Odisha) |
120 | S/F of 4 pole power contactor, 40 Amp (make-as approved by PWD Odisha) |
121 | S/F of Time switch, 240Volt AC, Base/DIN mounting type (make-as approved by PWD Odisha) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail