|
| 1 | M & L for providing and injecting chemical emulsion for Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors (area of floor shall be measured) complete all as specified. |
| 2 | M & L for providing and injecting chemical emulsion for Treatment of voids in masonary using chemical emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors (area of floor shall be measured) complete all as specified. |
| 3 | M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed. |
| 4 | M&L brick work withsub class\"B\" brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 5 | M&L cutting chases in brick wall, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc. 10 cm girth complete all as specified and directed. |
| 6 | Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified andas directed. |
| 7 | Taking down shutters of any description exc 1.0 Sqm but N exc 2 sqm and refixing in same opening complete all as specified and as directed. |
| 8 | Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 9 | Taking down chowkats or frame but exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 10 | Taking down shutters of any description exc 2.0 Sqm and refixing in same opening complete all as specified and as directed. |
| 11 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.Species of timber :-Gamari (Gnelinaarborea)/ Chickerassy (Chukrasia Tabularis) /Siris (Albizzia procera)/ Kalasiris (Albizzia Odoratissima) |
| 12 | S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.and complete all as specified and directed.Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri |
| 13 | S&F 30 mm thick 2nd class hard woodglazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; size of members of shutter as specified in SSR part-I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Species of timber :-Gamari (Gnelinaarborea)/ Chickerassy (Chukrasia Tabularis) /Siris (Albizzia procera)/ Kalasiris (Albizzia Odoratissima) |
| 14 | S & Ffactory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. |
| 15 | S&F factory made 28 mm thick solid PVC flush door shutter, made from co-extruded three layer rigid PVC foam sheet (single extruded), water proof, termite proof & fire retardant having density 600 kg/cum (minimum), outer layer 0.8-1mm thick of rigid PVC with density 1400 Kg/Cum complete all as specified and as directed.Make:- Rajshri Plastiwood Ltd /M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd |
| 16 | S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE) / M/s Archidply industries ltd |
| 17 | S&F in repairs 18/19 mm thick Plywood, grade BWR, type BB, adhesive type fixed with screws to timber frame work complete all as specified and directed.Make :- M/s Archidply & Industries Ltd / M/s Sylvan Plyboard (India) Pvt. Ltd (Brand : Sylvan Ply) / M/s Jain Wood Industries (Brand Jayna) |
| 18 | S & F 30 mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawinggiven on MES schedule Part – II (2010) complete all as specified and directed. |
| 19 | S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed. Species of timber :-Gamari (Gnelinaarborea)/ Chickerassy (Chukrasia Tabularis) /Siris (Albizzia procera)/ Kalasiris (Albizzia Odoratissima) |
| 20 | S & F of 150 mm long anodised Aluminium barrel tower bolts, of extruded section complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 21 | S&F 100 mm stainless steel butt hinge, medium weight, cold rolled mild steelcomplete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison |
| 22 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolttype and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 23 | S&F 100 mm long Aluminium handles cast type, anodisedand fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 24 | S&F 150 mm long Aluminium handles cast type, anodisedand fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 25 | S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 26 | S&F 100 mm hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.Make :-M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 27 | S&F 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 28 | S & F in repairs galvanized mild steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples including wooden beadscomplete all as specified and directed. |
| 29 | S&F in repairs 20 mm dia harrison rail, mild steel, chromium plated with & includig suitable fixing CP brackets, stops, rollers etc. complete all as specified and directed. |
| 30 | M&L for roof treatment in order of precedence as given below complete all as specified and as directed:-(i) 15 mm thick screed bed in CM 1:4 on surface.(ii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm.(iii) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing.(Contd...) |
| 31 | (iv) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer\"s instruction.Note :- (a) Bituminous primer shall be \"ShaliTex Primer\" manufactured by M/s STP Ltd or equivalent in M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited(b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction.(d) APP based polymeric membrane shall be manufactured by M/s STP Ltd or Berger Paints or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited(e) Water proofing paint shall be by M/s STP Ltd or Berger Paints or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited |
| 32 | Taking down unserviceable steel rolling shutters of any description complete all as specified and directed. |
| 33 | S&Fsteel rolling shutters of 1.00 mm thick lath, without ball bearing and including top cover, anchoring rod, hasp and staple and one shop coat of red oxide or zinc chrome primer erected in position as indicated complete push & pull or manual type complete all as specified and as dirrected.Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Steel Engineers / Sen-Harvic |
| 34 | S&F ball bearing suitable for rolling shutters of 1.25 mm thick lath and push & pull or manual type complete all as specified and as directed. |
| 35 | S&F safety lever locks mild steel with 4 levers for rolling shutters incuding locking plate complete all as specified and as directed. |
| 36 | S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed. |
| 37 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 38 | S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or weldedcomplete all as specified and directed.Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri |
| 39 | S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay without glazing bars dovetailed or weldedcomplete all as specified and directed.Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri |
| 40 | S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed.Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri |
| 41 | S&F 4 mm thick E-board (designer pattern)celing of size 60x60 cm, fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed.Make of boards:- Everest / Visaka Industries / Lafarge / ArmstrongMake of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products |
| 42 | S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and including dismantling complete all as specified anddirected.Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling ProductsMake of PVC Insulation Panel :-Rajshri Plastiwood Ltd /M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd |
| 43 | M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheet and brick wall, thickness of concrete bed exc. 5 cm and not exc. 10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork complete all as specified and directed. |
| 44 | S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed. |
| 45 | M&Lpowder coated Aluminium anodised door,window,Cup board and ventilator shutter and frame any type (Sliding or openable ) with frameand other similar work, fabricated aluminium mesh etc. aluminium heavy section favricated incl all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw incl cost of rubber gasket ,beading roller wheel etc. ,complete all as specified and directed.Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent IndustriesNote: (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measure.(b) Wire mesh shall be measured and paid separately.(c) Aluminium hinges shall be included in the unit rate |
| 46 | Supply and fixing factory made uPVC white colourThree track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drillingof holes for fixing hardware\"s and drainage of wateretc. Contd.. |
| 47 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of equired size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid eparately)Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & widthof profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but noextra payment on this account shall be made. |
| 48 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT(total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd. |
| 49 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm TCT(total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd. |
| 50 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 51 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over andincluding screed bed 15 mm thick in CM 1:6 acomplete all as specified and directed.Make:-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd |
| 52 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over andincluding screed bed 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 53 | M&L coloured glazed ceramic tiles 350x250x7 mm / 450x350x7 mm thickas in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed. Make :-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd |
| 54 | M&L 10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc.0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. Make :-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd |
| 55 | M&L 10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc.0.36 sqm in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. Make :-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd |
| 56 | M&L cement concrete chequered tiles 300x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thickscreed bed in CM 1:4 and pointed in neat cement slurry with grey cement and pigments to match the colour of tile complete all as specified and directed. Make : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn |
| 57 | M&L 60 mm thick machine pressed precast concrete interlockingcoloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 20 mm thick screed bed in CM 1:6 including demolition ,complete all as specified and directed. Make :- Lovely / Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles |
| 58 | M&L 50 mm thick, PCC 1:3:6, type C-2(using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | M&L 75 mm thick, PCC 1:3:6, type C-2(using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed. |
| 60 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 61 | M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth complete all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 62 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement including taking down of old plaster of wall complete all as specified and directed. |
| 63 | M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement including taking down of old plaster of wall complete all as specified and directed.Note:- WPC shall be measured and paid separately. |
| 64 | M&L 5 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement including taking down of old plaster of wall complete all as specified and directed. |
| 65 | M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemperovera coat of primer and over a thin layer of wall care puttyto obtain smooth finish complete all as specified and directed.Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints |
| 66 | M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemperovera coat of primer complete all as specified and directed.Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) |
| 67 | M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of alkali resistant primercomplete all as specified and directed.Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints /Asian Paints (Gutucam) / Crimocem Super Cement paints |
| 68 | M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemperovera coat of primercompleteall as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints |
| 69 | M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of Cement base paint over a coat of primercompleteall as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints |
| 70 | M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed.Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 71 | M&L preparation of New wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying two coat of synthetic enamel paint over one coat of Pink primer complete all as specified and directed.Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 72 | M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 73 | M&L preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed.Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 74 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 75 | S&F 3.00 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty/wooden beads in square n.exc. 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington |
| 76 | S&F 4 mm thick plain sheet glass ordinary quality fixed with aluminium frame work Not exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington |
| 77 | S&F 4.8 mm thick plain sheet glass ordinary quality fixed with aluminium frame work exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington |
| 78 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes of capacity 1000 litre to 2000 litre PVC water storage tank without dismantling the tank and including writing the words \"Tank Cleaning done on ____\" indicating the date, month & year of cleaning on external surface of tank wall with synthetic enamel paint complete all as specified and directed. Make of synthetic Paint:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 79 | S&F in repairs rotational moulded polyethylene water storage tanks of 500 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank including dismantling of old tank complete all as specified and directed.Make of tank:- Sintex / Polycon / PolywellMake of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf |
| 80 | S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tankcomplete all as specified and directed.Make of tank:- Sintex / Polycon / PolywellMake of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf |
| 81 | S&F in repairs 20 mm bore ball valves high pressure of PTMT withepoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 82 | S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor including taking down of old steel tube complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 83 | S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor including taking down of old steel tube complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 84 | S&F in repairs pillar tap 15 mm bore,fancy type, cast copper alloy, with capstan head, chromium plated, screweddown high pressure, with or without lettered “hot\" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No. - SQT-507KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 85 | S&FPVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed.Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 86 | S&F in repairs vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints,etc complete all as specified and directed.Make of Water Closet:- Hindware / Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) |
| 87 | S&F in repairs vitreous china squatting pan, \"Orissa pattern\"white, size 580 x 440 mm with integral foot rest,\"P\" or \"S\" trap and excluding connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware, Cat No. -20042 (Starwhite) or equivalent in Cera (Med Range) / Essco |
| 88 | S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and cutting for pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware, Cat No. -10010 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) |
| 89 | S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Make:- Parryware, Cat No.- E8055 or equivalent in Cera(1st quality) / Hindware / Essco |
| 90 | S & F in repair of 15 mm bore bib tap chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make:- Essco, Cat No. - SQT-511KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 91 | S & F in repair 15mm bore stop valve,Fancy type cast copper alloy, concealed type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including CP nipple and socket complete all as specified and directed.MAKE : M/s Jaquar & Company Pvt Ltd (Essco),Cera (Med Range) / Prayag |
| 92 | S&F in repairs health faucet 15 mm bore, chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. Make:- Prayag, Cat No. - BEA- 86or equivalent inM/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) |
| 93 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 94 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 95 | Demolition of cement concrete (unreinforced) inground floorsand pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 96 | Dismantling ceiling board any thickness including cover fillets fixed in any position with nails or screws complete all as specified and as directed. |
| 97 | Dismantling asbestos cement(corrugated or semicorrugated, etc.) sheets in roofs, walls coverings etc. complete all as specified and directed. |
| 98 | Dismantling boarding, any description, fixed in any position with nails or screws complete all as specified and as directed. |
