|
| 1 | AGE B/R SCHEDULE PART - IDismantling boarding any description fixed in any position with nails complete all as specified and as directed . |
| 2 | Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete all as specified and as directed . |
| 3 | Taking down chowkat or frame with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed . |
| 4 | Taking down chowkats or frames with shuttern. exc 1.50 Sqmeach with shutters (without taking off shutter from the frames) complete all as specified and as directed . |
| 5 | Taking down shutters of any descriptionnexc 1.0 Sqm refixing in same opening complete all as specified and as directed . |
| 6 | Taking down shutters of any descriptionexc 1.0 Sqm and nexc 2 sqm refixing in same openingcomplete all as specified and as directed . |
| 7 | Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as specified and as directed . |
| 8 | Taking down shutters of any description nexc.1.0 Sqm each complete all as directed |
| 9 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed . |
| 10 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 11 | Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed . |
| 12 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed and removing away from site. |
| 13 | Dismantling plain or corrugated steel sheeting , any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed and removing away from site. |
| 14 | Taking up or down steel work tubing and connections15mm bore of pipes complete all as specified and as directed and removing away from site. |
| 15 | Taking up or down steel tubing and disconnection, for 20mm bore of pipesand removing away for site complete all as specified and as directed. |
| 16 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out insoft/loose soil, complete all as specified and as directed. |
| 17 | Returning, filling in soil , including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed. |
| 18 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed. |
| 19 | M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and as directed. |
| 20 | M&L RCC1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in fondation, footing, Plinth beam complete all as specified and as directed. |
| 21 | M&L RCC1:1.5:3 (Nominal mix)using (20mm graded aggregates ) as in columns, pillars etc complete all as specified and as directed. |
| 22 | M& L for TMT bar 10mm dia and over cut to length ,bent to shaperequired including cranking , bending spirally for hooping column hooking ends and binding withmild steel wire (annealed ) not less than 0.9mm dia complete all as specified and as directed. |
| 23 | All as per item No 22 above but 5mm dia and over upto and including 10mm dia in stirrups ,spacers and binders. |
| 24 | Formwork to sides of concrete foundations,footings, bases of columns, plinth beams and similar work with roughfinish surfaces of concrete flat complete all as specified and as directed. |
| 25 | M&L forformwork to sides of pillars, posts,struts,pirs , coloumns and like complete all as specified and directed |
| 26 | M&Lfor wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed |
| 27 | Fixing only wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed |
| 28 | M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified |
| 29 | S&F Steel work in tublar trusses including special shaped washer etc complete all as specified and as directed. using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 |
| 30 | S&F framed work as in doors or gates of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed |
| 31 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 32 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof coveringincluding fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 33 | S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed |
| 34 | M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified |
| 35 | M&L for preparation of old/ new woodensurfacesof any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed. |
| 36 | M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm complete all as specified and as directed. |
| 37 | S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed. |
| 38 | M &L glazed skeleton hardwood shutters open rebatedand prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete all as specified and as directed. |
| 39 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 40 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing |
| 41 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and as directed. |
| 42 | S&F 15/16 mm thick pvc boardsfixed with screws to timber frame complete all as specified and as directed |
| 43 | S&F 12 mm thick pvc boardsfixed with screws to timber frame complete all as specified and as directed |
| 44 | S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified |
| 45 | S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 46 | S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 47 | S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and as directed. |
| 48 | S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and as directed. |
| 49 | S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specified and as directed. |
| 50 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 51 | S&F extruded aluminium alloy handles fabricated type anodisedof size 150 mm complete all as specified and as directed. |
| 52 | S&F butt hinges 100 mm medium weightmild steel cold rolled and fixed complete all as specified and as directed. |
| 53 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 54 | S&F powder coated(powder coating min 50 micron)anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified |
| 55 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed. |
| 56 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 57 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 58 | Prelaminated particle board of 12 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work. |
| 59 | M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 60 | M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed. |
| 61 | M&L for cement concrete 1:3:6 type C2, 75mm thick as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed. |
| 62 | M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains complete all as specified and as directed. |
| 63 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends complete all as specified and as directed. |
| 64 | M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed. |
| 65 | M&L for vitrified tiles light shade (square /rectangular) polished area of each tiles nexc 0.36 sqm sqm in floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed. |
| 66 | All as Per Item no 65 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thick CM 1:3 complete all as specified and as directed. |
| 67 | M&L for non skid ceramic white or coloured tiles7 to 8mm thkarea of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bedin CM 1:6 |
| 68 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 69 | M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4, pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed. |
| 70 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete |
| 71 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 72 | M&L for rendering15mm thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete |
| 73 | Supply only Integral waterproofing compound |
| 74 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete. |
| 75 | M&L for 10 mm thick 3D designer type PVC insulation panels with EPS stuck to 1mm with printed PVC sheet as per specifiecations and drawingcomplete all as specified and as directed. |
| 76 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 77 | M&L 4mm thick E Board 600x600 mmprepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-chargefixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as per manufacturer instruction. |
| 78 | S&F in repairs Brass CP angular stop cock fancy type with Capstan heads complete all as specified and as directed. of make Jaguar/Marc/Parryware |
| 79 | S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap complete all as specified and as directed. |
| 80 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and as directed. |
| 81 | M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 82 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed. |
| 83 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed. |
| 84 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 85 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 86 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof. |
| 87 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 88 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 89 | All as per Item No 88 above , but for 20mm dia (Bore). |
| 90 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. |
| 91 | Supply hoisting and fixingrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) of capacity 1000 ltrs in position incl float valvehigh pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed including dismantling of existing unservicable tank and removing away from tank complete all as specified and as directed. |
| 92 | S&F 15mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 93 | S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 94 | S&F 25mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 95 | M&L for preparation of new wall surafces and applying two coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed. |
| 96 | M&L for preparation of new wall surface and applying twocoats of acrylic emulsion paint , anti fungal , dirt resistance exterior paint of required shade over oneprimer coat complete all as specified and as directed. |
| 97 | Complete removal of existing treatment on wall surfaces and applying twocoat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and as directed. |
| 98 | Complete removal of existing treatment on wall surfaces and applyingtwocoats of oil bound distempering over 1mm of wall care putty complete all as specified and as directed. |
| 99 | M&L for preparation of new steel surfaces exc 10cm width or girth and appyling two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed |
| 100 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware |
| 101 | S&Fin repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware |
| 102 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag |
| 103 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make JaquarCat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag |
| 104 | S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag |
| 105 | S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag |
| 106 | S&Fin repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag |
| 107 | S&Fin repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag |
| 108 | S&F in repairscorner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag |
| 109 | S&Fin repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware |
| 110 | S&Fin repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware |
| 111 | S&FCP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera |
| 112 | S&F in repairsof Venetian blinds of wooden finished material width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge |
| 113 | M&L 12 mm thick toughened sheet clear glass incl edges bevelled /rounded incl grinding / cutting complete with all fittings/ washers/handles andbolts all necessary hardware complete all as specified and directed. |
| 114 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar |
| 115 | M&L for providing and fixing stainless steel (Grade 304 ) railing made of hollow tubes, channels,plates etc, incl welding , grinding , buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with necessary accessories & stainless steel dash fasteners, steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as diretced |
| 116 | M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 117 | M&L for non skid ceremic white tiles7 to 8mm thkarea of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bedin CM 1:6 complete all as specified |
| 118 | M&L for vitrified pavic tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles. |
| 119 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and wastes, incl bedding in cement moartor on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe onerall size990x420 double bowl with size of 410x330x160mm complete all as specified and as directed |
| 120 | S&F 15 mm bore brass CP swinging mixer for mixing hot & cold water screwed down for iron pipe and fixed complete |
| 121 | S&F for stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed by Engr-in-charge |
| 122 | S&F stainless steel single cutlery insert 500mm long complete all as sspecified and as directed by Engr-in-charge |
| 123 | S&F for stainless steel carrousel 650 mm dia complete all as specified and directed by Engr-in-charge |
| 124 | S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed by Engr-in-charge |
| 125 | S&F plain stainless steel cup & saucer basket of size 520x585x100mm complete all as specified and directed by Engr-in-charge |
| 126 | S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed by Engr-in-charge |
| 127 | S&F plain stainless steel grain trolley of size 525x485x350mmcomplete all as specified and directed by Engr-in-charge |
| 128 | S&F ball bearing drawer channel of size 600 mm long complete all as sspecified and as directed by Engr-in-charge |
| 129 | S&F for stainless steel soft spring system complete all as specified and directed by Engr-in-charge |
| 130 | S&F for clip on cabinet hinge full overlay complete all as specified and directed by Engr-in-charge |
| 131 | S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing |
| 132 | S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing |
| 133 | M&L forfor applying two or more coats(over 1 mm thick wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed. |
| 134 | AGE E/M SCHEDULE PART - IITaking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified. |
| 135 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceilingand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light/fan point controlled by one switch. |
| 136 | All as per item No 135 abovebut for socket outlet point 5 Amp on same board. |
| 137 | All as per item No 135 above but for socket outletpoint 5 Amp on Independent board. |
| 138 | All as per item No 135 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 139 | Supply and fixing modular switch 1 way 6Awith cover plate and frame 230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor, Vinay |
| 140 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand. |
| 141 | Supply and fixing modular switch 1 way 16Awith cover plate and frame230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor . |
| 142 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover platecomplete all as specified and directed. |
| 143 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts,50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed.ake:Cona , Plaza, Anchor, Vinay |
| 144 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one . |
| 145 | S & F in replacement of LED wall mounted with lamp1 x 9 watt including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire complete with necessary connection including taking down old unserviceable one (Replace existing wall fitting) |
| 146 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make:Cona , Plaza, Anchor . |
| 147 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m includingmaking all electric connection , cutting of hole on wall and makng good disturbed surface of wallcomplete all as specified and as directed |
| 148 | Supplyand fixing Bldg security light fittings 35 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pipe dia 25mm complete |
| 149 | Supply and fix in repair MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. |
| 150 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed |
| 151 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"s.complete all as specified and directed |
| 152 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium gradeISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. (ii)Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 153 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
| 154 | Material andlabour for point wiring with single core PVC insulated unsheathed cable of size 1.5 Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly completefor one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and directed. |
| 155 | All as per Item No. 154 above but for one 2/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed. |
| 156 | All as per Item No. 154 above but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed. |
| 157 | All as per Item No. 154 above but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulatedunsheathed single core multi-stranded copper cable of size 4 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 158 | Supply and fixing modular sockets 6A 2/3 pin combined 2 with moduler frame and cover complete module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover platecomplete all as specified and directed. |
| 159 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 with moduler frame and cover complete module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 160 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 161 | S&F lamp holder, insulated body, with back plate for batten fittingcomplete. Make- Havells/anchor /Legrand. |
| 162 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. Make Phillips/Bajaj |
| 163 | S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified. |
| 164 | Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, includingtaking down unservicable one.(Note: two run of 4.0 sqmm cable ,one runof earth wire of 4.0 sqmmand one run of PVC casing capping shall be measured as one length). |
| 165 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section in service connections |
