Tender For Special Repair To Bldg No T-04 And P-25 At Lgj Mil Station, Ganganagar-Rajasthan

Tender For Special Repair To Bldg No T-04 And P-25 At Lgj Mil Station; 1 Dismantling Of Brick Tiles Or Terracing Tiles, Single Layer On Roofs Complete All As Specified And As Directed By Engineer-In-Charge. 2 Demolition Mud In Roofs, Any Thickness, Including Plastering And Leeping Complete All As Specified And Directed. 3 Demolition Of Cement Concrete Of Any Description ( Unreinforcement Concrete ) And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And Directed. 4 Demolition Of Brick Work Or Stone / Boulder Masonry, Built In Cement Mortar Including Allquoins, Arches, Pillars, Etc, But Excluding Ashlar Facings, Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed By Engineer-In-Charge. 5 Demolition Of Cement Concrete Of Any Description ( Reinforcement Cut As Required To Facilitate ) Demolitionand In Any Position Not Otherwise Specifically Provided For Complete All As Specified And Directed. 6 Formwork To Chajjas, Troughs And Similar Items Including Edges , For Rough Surface Of Concrete, Complete All As Specified And Directed By Engineer-In-Charge 7 M&L For Reinforced Cement Concrete 1:1.5:3 Type A-1 Using 20Mm Graded Stone Aggregrate In Chajjas; Complete All As Specified And Directed By Engr-In-Charge.Note : Reinforcement Shall Be Measured And Paid Seperately. 8 M&L For 40 Mm Thick Cement Concrete Type B0, 1:2:4 ( 12.5 Mm Graded Stone Aggregate ) As In Roof Padding And Laid In Slope 1:30 Complete All As Specified. 9 M&L Applying Evenly A Tack Coat Of Industrial Bitumen 85 / 25 At The Rate Of 1.2 Kg Per Sqm As In Roof Including Cleaning Surfaces All As Specified And Directed 10 M & L App Based Membrance Minimum Weighing 3 Kg Per Sqm And Minimum 3Mm Thick Reinforced With Polyster Non Woven Fabric ( Wt Not Less Than 150 Gms / Sqm ) Laid On Primed Surface By Torced Application With App Membrane Over10mm Thick Screed Bed In Cm 1:3Mixing Of Wpc In Mortarcomplete All As Specified & Directed. 11 M & L For Cement Concrete Tiles 25Cm X 25Cm X 22Mm Thick, M A C H I N E Pressed; Over Cement Screed Base Laid Over Cement Screed Base Laid Over And Including15 Mm Thick Screed Bed Incement Mortar 1:6, Set And Jointed With Grey Cement Slurry Mixed With Pigment And No Pigmentin Floors / Roof, And Cut And Polished Complete All As Specified And Directed. 12 M&L Pcc 1:2:4 Type B-1, Using ( 20Mm Graded Stone Aggregate ) As In Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges Including Necessary Form Work Etc Complete All As Specified & Directed 13 M&L Forbrick Work With Fly Ash Bricks Straight Or Curved On Plan Exc. 6 Metre Mean Radius Built In Cement Mortar ( 1:6 ) All As Specified & Directed. 14 M&L For Old Size Brick Work With Fly Ash Bricks Straight Or Curved Any Radius Half Brick Thick Walls, Built In Cement Mortar ( 1:4 ) All As Specified & Directed. 15 S&F For Framed Work Such As Grills, Gratings Etc., With Ends Of Bars Shouldered And / Or Riveted, Or Forget Into Spikes, Framed Guard Bars; Barred Iron Doors, Ladders, Framed Balusters, Walk Ways, Railings, Framework Of Water Tanks And Similar Work Conforming To Fe 290-0 Or Grade E- 165 Complete All As Specified And As Directed 16 Taking Down Wooden Chowkhats Or Frames With Shutters ( Without Taking Off Shutters From The Frames ) Area Exceeding 1.50 Sqm But Not Exceeding 4.00 Sqm Each And Removing From Site All As Specified & Directed 17 Taking Down Existing Shutter And Refixing In Same Opening Shutters Of Any Description Exc 1.0 Sqm But Not Exc 2.0 Sqm Each All As Specified And Directed. ( Note:- Refixing Includes Taking Down, Easing And Adjusting And Also Refixing Builders Hardware As Required Including Renewal Of Unserviceable Screws, Etc. ) 18 Taking Down Wooden Chowkhats Or Frames N.Exc 1.5 Sq. M Each With Shutters ( Without Taking Off Shutters From The Frame ) Complete All As Specified And Directed By Engr-In-Charge. 19 Taking Down Shutters Of Any Description Exc 1.00 Sqm But Not 2.00 Sqm Each Including Removing To Store Complete All As Specified And Directed. 20 Supply & Fixing 35Mm Thick 2Nd Class Hard Wood Factory Made Plain Framed Panelled Shutters ( Two Panels ) With Lock Rail And Panel Inserts Of Comercial Veneered Particle Board With Commercial Veneering On Both Faces.The Size Of Rails And Styles As Per Is-1003 ( Part-I ) , Kiln Seasoned And Chemically Pressure Treated All As Specified & Directed 21 Supply And Fixing Of Fibre Glass Reinforced Plastic ( Frp ) Door Frame Of Required Built In Colour In Three Legged Of Cross-Section 90Mm X 45Mm Having Single Ribate Of 32Mm X 15Mm To Recieve Shutter Of 30Mm Thick Includinglaminated Door Frame Moulded With Fire Retardant Grade Unsaturated Polyster Resin And Chopped Strand Mat ( Csm ) Also Door Frame Laminated Shall Be 2Mm Thick And Shall Be Filled With Suitable Wooden Block Of 2Nd Class Hard Wood In All Three Legs Frame Shall Be Covered With Fibreglass From All Sides Ms Stay Flat Iron 25Mm X 3Mm Shall Be Provided At The Bottom To Steady The Frame Complete All As Specifiedand As Directed By Engineer-In- Charge. 22 Supply And Fixing Of 30 Mm Thick Glass Fibre Reinforced Plastic ( Frp ) Paneled Door Shutter Conferming To Is:14856-2000 Of Required Colour Andmade With Fire Retardant Grade Unsaturated Polyster Resin, Moulded To 3Mm Thick Frp Laminated For Forming Hollow Rails And Style With Suitable Second Class Hardwood Timber Block Inside At Required Places For Fixing Of Fittings, Cast Molithically With 5Mm Thick Frp Laminated For Panels Including Fixing To Frames, Complete All As Specified And As Directed By Engineer-In- Charge. 23 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Complete All As Specified And Directed 24 M&L For Rolled Sections As In Main And Cross Beams, Hip And Jack Rafters; Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates And Conforming To Fe 410 -W ( Gde- E- 250 ) Quality- A Complete All As Specified And Directed 25 S & Fframed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces Etc Complete Drilled For Fixing Of Steel Sheeting Of Other Covering, Doors Etc To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Handing Door Fitttings ( Exclusive Or Steel Sheeting Or Other Covering, Running Rails And Guides ) And Hanging Also Fastening And Fixing Confirming To Fe-410 W ( Gde-E-250 ) Complete All As Specified And Directed By Engr-In-Charge. 26 S&F 150Mm Long Aluminium Alloy Handles, Fabricated Type, Anodised Complete All As Specified & Directed By Engr-In-Charge. 27 S&F Aluminium Anodised Barrel Tower Bolt Of Extruded Section 200Mm Longall As Specified & Directed By Engr-In-Charge. 28 S&Ffor 150 Mm Long Floor Door Stopper Of Aluminium Alloy Body And Tongue, Anodised With Hard Drawn Steel Spring All As Directed. 29 S&F Stainless Steel Wire Cloth 0.63 Nominal Dia Of Wire And Average Width Of Aperture1.40 Mm And Fixed With Stainless Steel Wire Staplesall As Directed. 30 S&F For Powder Coated Aluminium Frame / Shutter For Doors, Windows, Ventilators And Aluminium Partition With One Or More Rebates Including Jointing Cleats Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws Etc Complete With Locking Arrangements For Fixing With Powder Coating On Aluminium Sections, Minimum Thickness Of Poweder Coating Shall Be 50 Micron As Per The Specification. The Top And Bottom Horizontal Members And Vertical Members Adjacent To Wall Shall Be Fixed With Floor, Ceiling, Walls And Cills Where Required And Fixed With The Help Of Rawl Plugs And Screws Or With Fixing Clips Or With Expansion Hold Plate Fastners. Aluminium Section Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Whereever Required Complete In All Respect All As Specified & Directed By Engr-In-Charge. Make Of Al Section : Jindal / Hindalco / Nalco 31 S & F Powder Coatedaluminium Door Shutters, Aluminium Section Weighing 0.55 Kg / M Including Necessary Joining Cleats, Glazing Clips, Ruber Neoprene Packing, Handles 03 Nos In Each Door, Hinges, Anodised Aluminum Snap Beading Screws Etc. Complete All As Specified And Directed Note : Minmum Thickness Of Powder Coating Should Be 50 Microns. 32 S&F For Powder Coated Anodised Aluminium Window And Ventilator Shutters, Side Hung Type Without Sash, Aluminium Sections Weighing Exc 0.55 Kg / M ( 1.50 To1.80Mm Th ) Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings Suchas Peg Stays 150 Mm Long ( 01 No ) Hinges Type B-21 100 Mm Long ( 2 Nos ) Suitable Handle ( 01 No ) In Each Window Shutter And Necessary Accessary As Required Complete All As Specified And Directed By Engineer-In-Charge ( Note : Glass Will Measured And Paid Separately ) 33 S & F For Aluminium Anodised ( Powder Coated ) Three Track Sliding Window Frame With Shutters ( Two Glazed And One Gauged Shutter ) Including All Necessary Joining Cleats, Hold Fast, Rubber Gasket, Snap Beading And Locking Arrangements Fixed With Screws To Wall Etc. Complete Andglazing With 5 Mm Thick Tinted Glass To Aluminium Frame Work Using Rubber Gasket And Including Stainless Steel Wire Cloth Of 0.36Mm Dia & Average Width Of Aperture 1.40Mm With Staple Or Suitable Fillets Wire Mesh Fitted With Screws And Washers Etc With The Following Section Of Frame And Shutter ( A ) Sections For Frame ( I ) Top And Verticals 92 X 29.50 X 1.30 Mm Thick ( Ii ) Bottom 92 X 29.50 X 1.20 Mm Thick. ( B ) Sections For Shutter ( I ) A Section 39 X 20 X 1.50 Mm Thick ( Ii ) Interlock Section 39 X 20 X 1.50 Mm Thick ( Iii ) H Section 41 X 20 X 1.10 Mm Thick Make: Jindal Or Equivalent Sections Of Hindalco / Nalco. 34 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) And Rubbish Off The Premises All As Specified And As Directed. 35 M&L For Joint Free Non Skid Ceramic Coloured Tiles 7 To 8 Mm Thick ( Square / Rectengular ) Area Of Each Tile Exc 0.11 Sqm But Not Exc 0.18 Sqm In Floor Over And Including 15 Mm Thick Screed Bedding In Cement Mortar 1:6, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Floorall As Specified And Directed. 36 M&L Glazed Ceramic Coloured Tiles 450 X 300 X 7 Mm Thick Joint Less Tiles As In Skirting, Dado Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tile Laid Over And Including 10Mm Thick Rendering In Cement Mortar ( 1:4 ) Including Necessary Cutting As Per Site Requirement Complete All As Specified And Directed 37 S & F Virified Ceramic Tiles Light Colour 10 Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15 Mm Thick Rendering In Cm 1:6 Complete All As Specified And Directed 38 S & F Virified Ceramic Tiles Light Colour 10 Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm But Not Exceeding 1.25 Sqm, As In Dado / Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed 39 Dismantling Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc And Laided, Bedded And Pointed In Any Mortar Complete All As Specified And Directed. 40 M&L For 20 Mm Thick Granite ( Of Any Type ) Work ( Table Rubbed And Polished ) In Steps, Jambs, Pillars, Window Cills, Cooking Platforms And Like In Cement Mortar ( 1:4 ) Including Pointing In White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Over 20 Mm Thick Screed Bed In Cm 1:6 Completeall As Specified And Directed. 41 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified And Directed 42 Taking Down Cement Plaster On Brick / Terrazoo On Brick / Stone Walls Including Raking Out Joints, Hacking For Key, Scrubbing Down With Waterall As Directed 43 M&L For Rendering 15Mm Thick On Brickwork Or Concrete Surfaces In Cement Mortar 1:6 On Wall And Finished Fair Even And Smooth Without Using Extra Cemnt All As Specified And Directed. 44 M&L For Rendering 15Mm Thick On Brickwork Or Concrete Surfaces In Cement Mortar 1:4 On Wall And Finished Fair Even And Smooth Without Using Extra Cemnt All As Specified And Directed. 45 M & L For Rendering 10 Mm Thick On Concrete Surfaces In Cm 1:4Finished Even And Smooth On Ceilingwithout Using Extra Cementall As Specified And Directed By Engr-In-Charge. 46 M&L For Preparation Of Newceiling Surface And Applyingtwo Coats Of Acrylic Distemperover A Coat Of Primer Complete All As Specified And Directed By Engr-In-Charge. 47 M&L For Complete Removal Of Existing Treatment In Old Ceiling Surfaces And Appying Two Coat Of Acrylicdistemper ( Any Colour / Tint ) On Ceiling Surface Complete All As Specified And Directed By Engr-In-Charge. 48 M&L For Applying Two Coats Of Acrylic Distemper Over A Coat Of Primer Over 3 Mm Thick Wall Care Puttyon Newly Plastered Surfacesof Wallsincluding Preparation Of Surfaces Complete All As Specified And Directed By Engr-In-Charge. 49 M&L For Complete Removal Of Existing Treatment From Walls Andapplying Two Coats Of Acrylic Distemper Over 3 Mm Thick Wall Care Putty Of Wallsincluding Preparation Of Surfaces Complete All As Specified And Directed By Engr-In-Charge. 50 M&L Preparing Newly Plastered Of Wall And Applying Three Coats Of White Wash On Wall Complete All As Specified & Directed By Engr-In-Charge 51 M&L For Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Cement Base Paint All As Specified & Directed By Engr-In-Charge. 52 M&L For Applying Two Coats Of Weather Proof Exterior Emulsion Paint ( Apex Ultima Or Equivalent ) Over A Coat Of Alkali Resistant Primer Over 3Mm Thick Wall Care Putty On Newly Plastered Surfacesof Walls Including Preparation Of Surfaces Complete All As Specified And Directed By Engr-In-Charge. 53 M&L For Preparation Of Old Plastered Wall Surface And Treating With Two Coats Of Weather Proof Exterior Emulsion Paint ( Apex Ultima Or Equivalent ) Over A Coat Of Alkali Resistant Primer Over 3Mm Thick Wall Care Putty Complete All As Specified And Directed By Engineer-In-Charge. 54 M & L For Painting New / Untreated Steel And Iron Surfaces Of Any Discription, Over 10 Cm Width Or Girth, Withtwo Coats Of Synthetic Enamel Paint Over Coat Of Red Oxide Primer Ordinary Tint Includingpreparation Of New Surfaces All As Spefified And Directed 55 M & L For Painting Oldsteel And Iron Surfaces Of Any Discription, Over 10 Cm Width Or Girth, Withtwo Coats Of Synthetic Enamel Paint Ordinary Tint Includingpreparation Of Old Surfaces All As Spefified And Directed 56 M&L Preparation Of New Or Previously Untreated Wooden Based Surface Of Any Description Not Otherwise Described Over 10 Cm Width Or Girth And Apply Two Coats Of Synthetic Enamel Paint Over One Coat Of Pink Primer All As Specified. 57 S & F 4 Mm Thickfigured Glass, Pin Head Oil Putty In Squares N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. 58 Taking Down Pvc Soil, Waste& Rain Water Pipe 100 / 75 Mm Dia Including Fittings Fixed To Walls, Laid In Floor Etccomplete All As Specified And Directed By Engr-In -Charge. 59 S&F 110 Mm Dia Bore Pvc ( Swr ) Pipe, Single Socketed In Any Length With Rubber Ring Joints Fixed With Clamps To Wallsall As Directed. 60 S&F 75 Mm Dia Bore Pvc Swr Pipe, Single Socketed In Any Length With Rubber Ring Joints Fixed With Clamps To Walls And Including Bend As Per Side Requirement, Taking Down Existing Pipe All As Directed. 61 S & F Pvc ( Swr ) Bend 110 Mm Bore All As Specified & Directed By Engr-In - Charge 62 S & F Pvc ( Swr ) Bend 75 Mm Bore With Access Door And Radiusall As Specified & Directed By Engr-In - Charge 63 S & F 110 Mm Bore Pvc ( Swr ) Branch Piece Double ( Single Y ) Equal Or Unequal All As Directed 64 S & F In Repair 100 Bore Of Spun Cast, Cast Iron Soil, Waste And Vent Pipes In Any Length With Or Without Ears, With Cement Joint And Laid In Trenches Or In Floors Cast Ironcomplete All As Specified And Directed. 65 S & F In Repair 75 Mm Bore Of Spun Cast, Cast Iron Soil, Waste And Vent Pipes In Any Length With Or Without Ears, With Cement Joint And Laid In Trenches Or In Floors Cast Ironcomplete All As Specified And Directed. 66 S & F In Repair Cast Iron 100 Mm Bore Branch Pieces, Single ( Equal Or Unequal ) , Ordinary Or Inverted ( Spigot Or Socket Type ) Or With Parallel Branchescomplete All As Specified And Directed. 67 S & F In Repair Cast Iron 75 Mm Bore Branch Pieces, Single ( Equal Or Unequal ) , Ordinary Or Inverted ( Spigot Or Socket Type ) Or With Parallel Branchescomplete All As Specified And Directed. 68 S & F In Repair Cast Iron 100 Mm Bore Bends ( Any Radius ) , Diminishing Pieces Or Tapers ( Larger Bore Measured ) Complete All As Specified And Directed. 69 S & F In Repair Cast Iron 75 Mm Bore Bends ( Any Radius ) , Diminishing Pieces Or Tapers ( Larger Bore Measured ) Complete All As Specified And Directed. 70 M & L In Repairscast Iron Floor Trap Dia Of Out Let 75 Mm, With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete Type B-1, ( 1:2:4 ) Complete All As Specified And Directed By Engineer-In-Charge. 71 M & L Pvc ( Swr ) Gully Trap 125 / 110 Mm, Setting And Jointing With Solvent Cementcomplete All As Specified And Directed By Engineer-In-Charge. 72 Taking Down 15 Mm Dia Steel Gi Tubing Including All Connected Fittings Of Any Dia And In Any Positionall As Directed. 73 All As Per Item No 72 Above But 20 Mm Dia Pipe 74 All As Per Item No 72 Above But 25 Mm Dia Pipe 75 S&F 15 Mm Diagalvanised Steel Tubing Medium Grade Including Necessary Fittings Like Sockets, Tees, Elbows, Reducers, Unions Etcfixed To Walls / Ceiling Complete All As Directed. 76 All As Per Item No 75 Above But Fixing Only 77 All As Per Item No75above But 20 Mm Dia Pipe 78 All As Per Item No 75 Above But 25 Mm Dia Pipe 79 S&F In Repair Bib Tap 15Mm Bore Cast Copper Alloy Chromium Plated Long Body Fancy Type With Capston Head And Cup Screwed Down, Hand Operated, Screwed For Iron Pipe Or For Brass Ferrule All As Specified. 80 S&F In Repair Cp Brass Stop Valve / Angle Valve Fancy Type 15 Mm Bore Cast Copper Alloy Screwed Down High Pressure Fancy Typefixed Complete All As Specified And Directed By Engr-In-Charge. 81 S&F In Repair Cp Brass Stop Valve / Angle Valve Fancy Type 15 Mm Bore Cast Copper Alloy Screwed Down High Pressure Fancy Type With Long Shank And Cup ( Concealed Type ) Fixed Complete All As Specified And Directed By Engr-In-Charge. 82 S & F In Repair Brass Chromium Plated Liquid Soap Dispenser Complete All As Specified And As Directed By Engineer-In-Charge. 83 S&F In Repair Gun Metal Globe Or Gate Valve 25 Mm Bore With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed All As Specified And Directed By Engineer-In-Charge. 84 S&F In Repair Gun Metal Globe Or Gate Valve Of 20 Mm Bore With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixedall As Specified And As Approved By Ge / Engineer-In-Charge. 85 M & L For 19 Mm Thick Plywood Fixed In Repair, Grade Bwr, Type Bb, With Decorative Face Veneers On Both Faces; Handle And Fixed With Screws To Timber Frame Work Complete All As Specified And Directed 86 S & F Continuous ( Piano ) Hinges Mild Steel Bright Finsh Or Electro Galvanised, Width Of Flap When Open 30Mm Complete All As Specified And Directed By Engr-In-Charge. 87 S&F Drapery Stainless Steel Rods, Standarad Quality, Not Less Than 25 / 28 Mm Dia With Heads, Brackets And Boths Ends Stainless Caps , Etc. All As Specified And Direced. 88 S&F In Repairvitreous China Squatting Pan Orissa Pattern Size 580 X 440 Mm White With Integral Foot Rests ( Excl Flushing Cistern ) But Including Ci P Trap Set In Cement Concrete Fixed All As Specified. 89 S & F In Repair Cabinet Mirror Of Size 400Mm X 500 Mm Fixed With Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed By Engineer-In-Charge 90 S&F In Repair Looking Mirror Of Selected Quality On Size600 Mm X 450 Mm Withbevelled Edge Mounted 6 Mm Thick Commercial Plywood And Aluminium Channel Of Required Size Fixed To Pvc Plugs With Chromium Plated Brass Screws And Cup Washers All As Directed. 91 S&Fin Repairtubular Towel Rail Stainless Steel20mm Dia D Type 60Cm Long Between Flanges Complete All As Spd & Dir By Eic. 92 S & F In Repair Corner Glass Shelf 200 Mm With Abs Brackets Complete All As Specified And Directed By Engineer-In -Charge 93 S&F In Repair Chromium Plated Fancy Type Soap Dish Complete All As Specified And Directed 94 S&F In Repair Vitreous China Wash Down Water Closet Pan ( Pedestral Pattern ) , White ( Excluding Fixing Bolts , Flushing Cistern And Flush Pipe ) , Including Connection To Drain ( Or Outgoing Pipe ) And To Flushing Pipe, Antisyphonage Pipe, Etccomplete. 95 S&F In Repair Vitreous China Wash Hand Basin Coloured Counter Flat Back Of Size 550X400mm, Long Screwed Shank Fly Nut Flangeend Including Cutting For And Pinning In Ends Of Brackets In 1:3 Cm Including 32Mm Dia Chromium Plated Waste Coupling / Trap All As Specified . 96 S&F In Repair Vitreous China Wash Hand Basin Coloured Counter Top ( Bowl Type / Oval Shape ) Of Size 560X450mm, Long Screwed Shank Fly Nut Flangeend Including Cutting For And Pinning In Ends Of Brackets In 1:3 Cm Including 32Mm Dia Chromium Plated Waste Coupling / Trap All As Specified . 97 S&F In Repairs Grating Doom Cp 100 Mm Diawith Waste Hole Complete All As Specified And Directed 98 S&F In Repair Stainless Steel Trap With Grating Round Or Square 150Mm Size ( Minimum Weight 100Gms ) Complete All As Specified And As Directed By Engineer-In-Charge. 99 S & F In Repairs 32 Mm Pvc Waste Down Pipe Suitable For Whb And Urinal Complete All As Specified And Directed By Engineer-In-Charge 100 Supply And Fixing In Repair Hot And Cold Whb Mixer Cast Copper Alloy Chromium Plated Quarter Turn Screwed Down For Pipe Of15mm Bore Complete All As Specified And Directed By Engineer In Charge 101 S & F In Repairwall Mixer With L Bend 115 Mm Long Full System Brass ( Cast Copper Alloy ) Chromium Plated, Mixer For Mixing Hot & Cold Water, Screwed Down For Iron Pipe 15 Mm Borecomplete All As Specified And As Directed By Engineer-In -Charge 102 S&F In Repair Health Faucet With Cp Flexible Cord Fixed On Wall Complete All As Specified And Directed By Engneer -In-Charge 103 S&F In Repairs Pvc Valve Less, Syphonic Action Type Flushing Cistern, 10 Ltrs Capacitylow Level, White, With Inlet Ball Valve, Float, Handle, And Connection To Pipesand Flush Pipe Of Polyethylene Of Low Or High Density Or Pvc, 32Mm Dia, For Low Level Cistern All As Directed. 104 S&F In Repair Cp Towel Ring Of Size 150 Mm Decorative Type Fixed With Walls Complete All As Specified And Directed By Engneer -In-Charge 105 S&Fin Repair Pvc Connections 15 Mm Size With Ptmt Nuts Of Length 450 Mm Long All As Directed. 106 S&F In Repair, Shower Rose, 125 Mm Size, Brass Chromium Plated Withsweivel Joint Complete All As Specified And Directed By Engr-In-Charge. 107 M&L For 75 Mm Thick Pcc 1:3:6 Type C-2 Using 40 Mm Graded Mechanically Crushed Stone Aggregate As In Plinth Protection Finished Even And Smooth Without Using Extra Cement With & Including 10 Mm Wide, 30 Mm Deep Joints At The Rate Of 3.00 Mtr Centre To Centre And At Every Turning & Filling The Joints With Bitumen & Sand Mixture Complete All As Directed. 108 Dismantling Water Tank Exc 250 But N. Exc. 500 Litre Capacity Any Type And Remove From Sitecomplete All As Specified And Directed By Engineer-In-Charge. 109 Dismantlingwater Tank Exc 500 But N. Exc. 1000 Litre Capacity Any Typeand Remove From Sitecomplete All As Specified And Directed By Engineer-In-Charge. 110 S&F For Rotational Moulded Polythene Water Storage Tank 500 Ltr Capacity Vertical With Closed Top Hoisted And Fixed In Position All As Specified In Ssr Part-I Complete All As Specified And Directed By Engineer-In-Charge. . 111 S&F For Rotational Moulded Polythene Water Storage Tank 1000 Ltr Capacity Vertical With Closed Top Hoisted And Fixed In Position All As Specified In Ssr Part-I Complete All As Specified And Directed By Engineer-In-Charge. . 112 S&Fin Repairs20 Mm Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High-Density Plastic Bal Screwed For Iron Pipe And Fixed. ( Minimum Weight 15Mm-142 Gms / 20Mm-210 Gms / 25Mm-455Gms ) 113 S&F For Tmt Bars ( Fe-500D ) 10 Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips All As Specified And Directed. 114 Demolition Of Cement Concrete In Ground Floor And Paving N.Exc 15Cm In Thickness ( Below Or Above Ground Level ) All As Specified. 115 M&L For 75 Mm Thick Pcc ( 1:3:6 ) Type C2 Using 40Mm Graded Stone Aggregate As In Sub Base Below Floors All Specified And Directed. 116 M&L Pre Cast Pcc 1:2:4 Type B-1, Using ( 20Mm Graded Stone Aggregate ) As In Kerb Stone Size 300 Mm X 300 Mm X 100 Mm With Plain Fair Face, Including Chamfers, Weathering, Throating Etc Setting In Cm 1:4 Complete All As Specified And Directed. 117 M&L Machined Pressed Precast Concrete Interlocking Paver Block Glossy With Grey Cementand Pigment, Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness M-35 Grade With Over Fazilka Sand Cushion All As Specified And Directed. ( Sand Will Be Measured And Paid Seperatly ) 118 Suply Onlyfine Aggregate ( Sand ) For Cushioning ( Fazilka Sand ) All As Specified And Directed 119 M & L Plain Cement Concrete Type B-2 1:2:4 Using 20 Mm Graded Stone Aggregate As In 40 Mm Thick Flooring Finished Surfaces Even And Smooth Without Using Extra Cement Complete For All As Specified And Directed 120 Dismantling Asbestos Cement ( Corrugated, Semicorrugated, Etc. ) Sheets In Roof Coverings All As Directed. 121 S & F Pre- Painted Galvatume Aluminum Zinc Coating Gi Based Corrugated / Semi Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws As Specified 122 S & F Pre- Painted Galvatume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws As Specified 123 Excavation In Trenches N.Exc. 1.5M Wide And N.Exc 1.50 M In Depth For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N.Exc. 10 Sqm On Plan And N.Exc 1.5 M In Depth And Getting Out In Getting Out In Sof / Loose Soil All As Directed. 124 Removal Of Excavated Surplus Spoil To A Distance N.Exc 50M And Deposting Where Directed At Level Not Exceeding 1.5 M Above The Starting Point Complete All As Specified & Directed By Engineer-In-Chargeq 125 Returning, Filling In, Including Spreading Levelling Including Watering & Well Ramming In Layers N. Exc 25 Cm Any Type Of Soil Complete All As Specified And Directed By Engineer-In-Charge 126 S & F For 2 Mm Thick Fibre Glass Reinforced Translucent Plain Sheeting With 15 Cm Side Lap Fixed With Coach Screw And Washer In Roof, Wall Etc 127 M&L For Pcc 1:2:4 Type B1 Using20mm Graded Aggregates As In Benching / Haunching Ofmanholes Including Forming Channels Including Necessary Formwork Etc. 128 M&L For Pcc 1:2:4 Type B1 Using20mm Graded Aggregates As In Coping And The Like Including Weathering Slightly Rounded Or Chamfered Angles And Throating, As Directed Including Necessary Formwork Etc. 129 M&L Precast Cement Concrete 1:2:4 Type B1 Using 20Mm Graded Stone Aggregate And Set Cement Mortar 1:6 As In Cover Slabs ( For Manholes Etc ) , Chajjas, Shelves And Similar Articles With Plain Faces All As Directed 130 M&L Moorum / Red Bajri Filling In Floors Or Pavings, Laid In Layers N Exc. 15 Cm Thick, Spread, Levelled And Rammed Including Watering Complete All As Specified And Directed By Engr-In-Charge. 131 Supply And Laying Dwcpe ( Sn8 ) 150 ( Id ) Mm Diameter Drain Pipes As Per Is-16098 ( Part-Ii ) , Laid In Trenchesand Including Over 100 Mm Moorumbed To Required Slope, Including All Accessories / Fittings, Jointing And Tested Complete All As Specified And As Directed By Engineer-In-Charge. Note:Dwcpe Pipe Should Be Isi Marked As Approved By Engr-In - Charge. 132 Dismantling Wall And Ceiling Boards ( Fibre, Pulp, Insulation Etc ) Or Insulation Boards / Slabs / Blankets Of Any Thickness Including Cover Fillets Complete All As Specified And Directed. 133 S&F Armstrong Mineral Fiber Accoustical Suspended Ceiling System With Anf ( Micro Look ) Ege Tiles With Arm Strong Silhouette Exposed Grid. The Tiles Should Have Humidity Resistance ( Rh ) Of 90%. Nrc 0.5%. Light Reflectance Shall Be More Than 85% Thermal Conductivity K=0.052-0.057 W / Mk. Colour Shall Be White, Fire Perfomance Class 0 / Class 1 ( Bs 4760 In Module Size Of 600Mmx600mmx15mm With Bioblock Coating On The Face Of Tiles. Suitable For Green Building Application With Recycle Content Of 63% The Tiles Shall Be Laid On Arm Strong Silhouette Profile Grid System With 15Mm With Flanges Incorporating 6Mm Central Revel In White / Black Colour And With A Web Height Of 45Mm And And Load Carrying Capacity Of Minimum 15.68Kg / Sqm.Silhouette , Main Runner And Cross Runner Shall Have Mitred End And Birdsmouth Notches To Provides Mitred Juction. The Tee Section Hace A Galvanised Of 125Gms / Sqm Complate All As Specified And Directed By Engineer-In-Charge. 134 Dismantling Timber Scantling 40 Sq Cm And Over In Section Framed Work, In Any Position 135 S&F For 4.8 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Aluminium Snap Beading Of Any Size Of Glass In Each Pane With Solar Control Film 25 Micron Reflective Type Sticked To Glass Panes As Per Instructions Of Manufactuers Complete All As Specified & Directed. ( Aluminium Snap Beading & Neoprene Gasket / Rubber Packing Not Included In This Items 136 S & F Powder Coated Standard Aluminium Anodised Grill Size Of Mesh 75 Mm X 75 Mm And 8 Mm Thick Section Using U Channel 25 X 12 Mm All As Specified And Directed. 137 S & F 4 Lever Brass Body Mortice Lock, Vertical Type, Size 100 Mm Complete All As Specified And Directed. 138 S & F Door Closer Aluminium ( Die Cast ) Body Hydraulically Regulated Designation No 3 Universal Type, Suitable For Door Shutters Of 851 To 1000 Mm In Width And Of Weight Between 61 To 80 Kg And Fixed 139 E / M Portiontaking Down Carefully Copper / Aluminium Point Wiring ( Light, Socket Or Power ) Complete ( Fittings Such As Switches, Ceiling Roses, Pendants, Regulatos, Sockets Etc To Be Measured Separately ) , And Making Good Disturbed Surfaces Of Walls, Floors Etc To Match With Existing Surfaces. 140 Taking Down Mcb With Sheet Metal Enclosure, Main Switch, Db, Etc And Making Good Disturbed Surfaces To Match With Existing Surfaces. 141 Taking Down Sub Main Wiring Of Any Size / Capacity Complete All As Specified And Making Good Disturbed Surfaces To Match With The Existing Surfaces 142 M&L For Concealed Point Wiringfor One Light Point Controlled By One, Oneway Switch With Single Core Pvc Insulate, Unsheathed Multistranded Copper Conductorcable Of Size 1.5 Sq.Mm ( Frls ) Drawn In And Including Electrical Grade Pvc Conduit20 Mm Dia Concealed On Wall / Ceiling / Floorincluding Pvc Insulated Unsheathed Earth Wire With Multi Stranded Copper Conductor Of Size 1.5 Sq.Mm ( Frls ) Including Ms Shunk Sheet Metal Box With 3 Mm Thick Bakelite Plastic Laminated Sheet Top Cover With Brass Counter Shunk Screws With Washercomplete All As Specified. Note - Quoted Rate Shall Include Making Good To The Disturbed Surfaces Including Plastering Andpaintingto Match With The Existing Colour. 143 , --Ditto--- All As Per Serial Item No 143 Above, But For One Ceiling / Exhaust Fan Point Controlled By One Switch And Regulator Complete All As Specified And Directed By Engr-In-Charge. 144 , --Ditto--- All As Per Serial Item No 143 Above, But For One Bell / Buzzer Point Controlled By One Bell Puch Complete All As Specified And Directed By Engr-In-Charge. 145 , --Ditto--- All As Per Serial Item No 143 Above, But For One 3 Pin 5 Amps Switch Socketon Same Board With Other Switches Complete All As Specified And Directed By Engr-In-Charge. 146 , --Ditto--- All As Per Serial Item No 143 Above, But For One 3 Pin 5 Amps Switch Socket Outlet Point On Independent Board Complete All As Specified And Directed By Engr-In-Charge. 147 , ---Ditto-- All As Per Item No.143Above But Point Wiring With 4 Sqmm Multi Stranded Conductor Cable And 2.5 Sqmm Unsheathedcopper Conductor Earth Wire For Two In One 5 Pin 15 Amp Socket Outlet On Indep Board. 148 Supply And Fix Switch, Piano Type, Single Pole, One Way 5 / 6 Amp Rating 230 / 250 Volts Grade On Top Covers ( Catered In Point Wiring Above ) 149 Supply And Fix Piano Socket 2 In 1, 2 / 3 Pin 6 Amp Flush Type 250 Volts Ac Complet All As Specified And As Directed 150 Supply And Fix Piano Socket 2 In 1, 3 Pin 5 Amp And 15 Amp Flush Type 240 Volts Ac Complet All As Specified And As Directed 151 Supply And Fix Piano Swith 15 Amp Flush Type 240 Volts Ac Complet All As Specified And As Directed 152 S & F Led Light Fitting 1 X 20 W, 230 V Integral Sleek Polycarbonate Led Channel With White Acrylic Cover Incl Making Connection Complete. 153 S & F Led 2 X 2 Flat Panels To Enhance The Delight Of Occupants With Fittings Recess Mounting Complete All As Specified And As Directed. 154 Supply And Fix Lamp Holder Insulated Body With Back Plate For Angle / Batten Fitting With Ledof 09 Watt Complete All As Specified And As Directed. 155 Supply & Fixingbell Push Switch 6A, All As Specified And Directed By Engineer-In- Charge 156 Supply And Fix Bell Ac 230 Vott Single Pole Complete All As Specified And Directed 157 Supply And Fix Ceiling Rose Surface Bakelite Two To Three Terminals / Plate 5 Amps Complete All As Specified And Directed By Engr-In-Charge. 158 Supply And Fix Fan Regulator Electronic Solid State With Steps Suitable For 1200 / 1400Mm Sweep Ceiling Fan Working On 230 Volt Ac Complete All As Specified And Directed 159 Supply And Fix Verticle Mcb Db Tpn 415 Volts 4 Way With 200 Amps Bus Capacity Double Door Incl Fixing On Wooden Board Or Recessed On Wall Complete All As Specified And As Directed 160 Supply And Fix Sheet Metal Enclosure Db Single Pole And Neutral For 240 Volts 8 Way Double Door With 200 Amps Rated Busbarflush / Surface Mounting Double Door Complete All As Specified And Directed 161 Supply And Fix Mcb Sp 240 Volt 5-32 Amp 10Ka Complete All As Specified And As Directed. 162 Supply And Fix Mcb Sp & N240 Volt 5-32 Amp 10Ka Complete All As Specified And As Directed. 163 Supply And Fix Mcb Sp240 Volt 40 Amp 10Ka Complete All As Specified And As Directed. 164 Supply And Fixing Pvc Blanking Plates One Way With Internal Lock Complete All As Specified And As Directed. 165 Material & Labour For Sub Main Wiring With Two Run Single Core 6 Sqmm Pvc Insulated Unsheathed ( Frls ) Cable With Stranded Copper Conductor Drawn In Pvc Conduit & Accessories Suitable Size With And Including 6 Sqmm Copper Green Colour Earth Wire All As Specified And Directed By Engineer-In-Charge.Note-Two Run Of 6 Sq.Mm & One Run Of 4 Sq.Mm & One Run Of Pvc Conduit With Accessories Shall Be Measured As One Length. 166 M&L For Earthing Complete With Galvanised Steel Earth Plate Electrode 60 Cm X 60 Cm X 6Mm Thick Burried Directly In Ground Vertically To A Depth Not Less Than 2.25 Metre Below Ground Level With Top Edge Of Earth Plate At A Depth Of Not Less Than 1.5 Metre Below Ground Level, Earth Plate Surrounded By 15Cm Thick And Packed Layer Of Charcoal Dust And Common Salt, Connected To Earth Lead Ofgi Wire 4 Mm Dia ( 8 Swg ) By Means Of Bolts, Nuts And Washers Of The Earth Wire.Galvanised Iron Or Steel And Thimbles And Other End Of The Earth Wire Connected To Earthing Test Point And Protected By Galvanised Iron Pipe Light Grade 15Mm Dia And Water Pipe 20Mm Dia Gi Light Grade With Funnel And Wire Mesh, Pcc Chamber In Cement Concrete ( 1:2:4 ) Type B-1And Ci Cover With Frame All As Shown In Electrical Plate No. 3 Of Mes Schedule Part-I Of Ssr-2009. Notes :- ( I ) 20 Mm Dia Gi Pipe For Watering To Be Provided With A Socket And Plug And Should Be 10 Cms Above Ground Level. ( Ii ) Outer Edge Of Earth Pit Will Be 1 Metre Away From The Outer Edge Of Pcc Chamber. ( Ii ) Gi Wire Upto Dbs Earth Connection Is Included In This Item. ( Iii ) Water Pipe Shall Be Provided In Slanting Position 167 Supply And Fix Sheet Metal Enclosure Db Single Pole And Neutral For 240 Volts 8 Way With 200 Amps Rated Busbarflush / Surface Mounting Double Door Complete All As Specified And Directed 168 Note:- The Contract Sum Shall Be Calculated By Deducting The Amount Shown In Credit Schedule Attached To This Tender, From Total Amount Of Schedule A / Boq

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	08-Sep-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	15-09-2023

INR 500 /-

INR 46000.0 /-

Refer document

Name of Work : SPL REPAIR TO BLDG NOT-04 & P-25 AT LGJ MIL STN

Sl. No.	Item Description
1	Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by engineer-in-Charge.
2	Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.
3	Demolition of cement concrete of any description (unreinforcement concrete) and in any position not otherwise specifically provided for complete all as specified and directed.
4	Demolition of brick work or stone/boulder masonry, built in cement mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
5	Demolition of cement concrete of any description (reinforcement cut as required to facilitate) demolitionand in any position not otherwise specifically provided for complete all as specified and directed.
6	Formwork to chajjas, troughs and similar items including edges , for rough surface of concrete, complete all as specified and directed by Engineer-in-charge
7	M&L for reinforced cement concrete 1:1.5:3 type A-1 using 20mm graded stone aggregrate in Chajjas; complete all as specified and directed by Engr-in-charge. Note : Reinforcement shall be measured and paid seperately.
8	M&L for 40 mm thick cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) as in roof padding and laid in slope 1:30 complete all as specified.
9	M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm as in roof including cleaning surfaces all as specified and directed
10	M & L APP based membrance minimum weighing 3 KG per sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torced application with APP membrane over10mm thick screed bed in CM 1:3mixing of WPC in mortarcomplete all as specified & directed.
11	M & L for cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; over cement screed base laid over cement screed base laid over and including15 mm thick screed bed incement mortar 1:6, set and jointed with grey cement slurry mixed with pigment and no pigmentin floors/roof, and cut and polished complete all as specified and directed.
12	M&L PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed
13	M&L forbrick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.
14	M&L for old size brick work with fly ash bricks straight or curved any radius half brick thick walls, built in cement mortar (1:4) all as specified & directed.
15	S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors,ladders, framed balusters, walk ways, railings,framework of water tanks and similar work conforming to Fe 290-0 or grade E- 165 complete all as specified and as directed
16	Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed
17	Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- "Refixing" includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)
18	Taking down wooden chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.
19	Taking down shutters of any description exc 1.00 sqm but not 2.00 sqm each including removing to store complete all as specified and directed.
20	Supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (Two panels) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces.The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed
21	Supply and fixing of Fibre glass Reinforced plastic (FRP)door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick includinglaminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specifiedand as directed by Engineer-in- charge.
22	Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour andmade with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
23	Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
24	M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed
25	S & Fframed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting of other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fitttings (exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing confirming to Fe-410 W (Gde-E-250) complete all as specified and directed by Engr-in-charge.
26	S&F 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-charge.
27	S&F aluminium anodised barrel tower bolt of extruded section 200mm longall as specified & directed by Engr-in-charge.
28	S&Ffor 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.
29	S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture1.40 mm and fixed with stainless steel wire staplesall as directed.
30	S&F for powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
31	S & F powder coatedaluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 03 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed Note : Minmum thickness of powder coating should be 50 microns.
32	S&F for powder coated anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing exc 0.55 Kg/m (1.50 to1.80mm th) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings suchas peg stays 150 mm long (01 No) hinges type B-21 100 mm long (2 Nos) suitable handle (01 No) in each window shutter and necessary accessary as required complete all as specified and directed by Engineer-in-charge (Note : Glass will measured and paid separately)
33	S & F for Aluminium anodised (Powder coated) Three track sliding window frame with shutters (two glazed and one gauged shutter)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter(A)Sections for frame (i) Top and verticals 92 x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) "A" section 39 x 20 x 1.50 mm thick (ii) "Interlock" section 39 x 20 x 1.50 mm thick(iii) "H" section 41 x 20 x 1.10 mm thick Make: Jindal or equivalent sections of Hindalco/ Nalco.
34	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.
35	M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floorall as specified and directed.
36	M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed
37	S & F Virified Ceramic tiles light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in CM 1:6 complete all as specified and directed
38	S & F Virified Ceramic tiles light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 1.25 sqm, as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed
39	Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.
40	M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in CM 1:6 completeall as specified and directed.
41	Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed
42	Taking down cement plaster on brick / terrazoo on brick/ stone walls including raking out joints, hacking for key, scrubbing down with waterall as directed
43	M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:6 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
44	M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
45	M & L for Rendering 10 mm thick on concrete surfaces in CM 1:4finished even and smooth on ceilingwithout using extra cementall as specified and directed by Engr-in-charge.
46	M&L for preparation of newceiling surface and applyingtwo coats of acrylic distemperover a coat of primer complete all as specified and directed by Engr-in-Charge.
47	M&L for complete removal of existing treatment in old ceiling surfaces and appying two coat of acrylicdistemper (any colour/tint) on ceiling surface complete all as specified and directed by Engr-in-Charge.
48	M&L for applying two coats of acrylic distemper over a coat of primer over 3 mm thick wall care puttyon newly plastered surfacesof wallsincluding preparation of surfaces complete all as specified and directed by Engr-in-Charge.
49	M&L for complete removal of existing treatment from walls andapplying two coats of acrylic distemper over 3 mm thick wall care putty of wallsincluding preparation of surfaces complete all as specified and directed by Engr-in-Charge.
50	M&L preparing newly plastered of wall and applying three coats of white wash on wall complete all as specified & directed by Engr-in-charge
51	M&L for preparation of new plastered surface of walls and applying two coats of cement base paint all as specified & directed by Engr-in-charge.
52	M&L for applying two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty on newly plastered surfacesof walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
53	M&L for preparation of old plastered wall surface and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.
54	M & L for painting new/untreated steel and iron surfaces of any discription,over 10 cm width or girth, withtwo coats of synthetic enamel paint over coat of red oxide primer ordinary tint includingpreparation of new surfaces all as spefified and directed
55	M & L for painting oldsteel and iron surfaces of any discription,over 10 cm width or girth, withtwo coats of synthetic enamel paint ordinary tint includingpreparation of old surfaces all as spefified and directed
56	M&L preparation of new or previously untreated wooden based surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.
57	S & F 4 mm thickfigured glass, pin head oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
58	Taking down PVC soil, waste& rain water pipe 100/75 mm dia including fittings fixed to walls, laid in floor etccomplete all as specified and directed by Engr-in -Charge.
59	S&F 110 mm dia bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed with clamps to wallsall as directed.
60	S&F 75 mm dia bore PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls and including bend as per side requirement, taking down existing pipe all as directed.
61	S & F PVC (SWR)bend 110 mm bore all as specified & directed by Engr-in - charge
62	S & F PVC (SWR) bend 75 mm bore with access door and radiusall as specified & directed by Engr-in - charge
63	S & F 110 mm bore PVC (SWR) branch piece double (Single Y) equal or unequal all as directed
64	S & F in repair 100 bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast ironcomplete all as specified and directed.
65	S & F in repair 75 mm bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast ironcomplete all as specified and directed.
66	S & F in repair cast iron 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchescomplete all as specified and directed.
67	S & F in repair cast iron 75 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchescomplete all as specified and directed.
68	S & F in repair cast iron 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
69	S & F in repair cast iron 75 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
70	M & L in repairscast iron floor trap dia of out let 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and directed by Engineer-in-Charge.
71	M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and directed by Engineer-in-Charge.
72	Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any positionall as directed.
73	All as per item No 72 above but 20 mm dia pipe
74	All as per item No 72 above but 25 mm dia pipe
75	S&F 15 mm diagalvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etcfixed to walls / ceiling complete all as directed.
76	All as per item No 75 above but fixing only
77	All as per item No75above but 20 mm dia pipe
78	All as per item No 75 above but 25 mm dia pipe
79	S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified.
80	S&F in repair CP brass stop valve/ angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy typefixed complete all as specified and directed by Engr-in-charge.
81	S&F in repair CP brass stop valve/ angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed complete all as specified and directed by Engr-in-charge.
82	S & F in repair brass chromium plated liquid soap dispenser complete all as specified and as directed by Engineer-in-charge.
83	S&F in repair gun metal globe or gate valve 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engineer-in-Charge.
84	S&F in repair gun metal globe or gate valve of 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixedall as specified and as approved by GE/Engineer-in-Charge.
85	M & L for 19 mm thick plywood fixed in repair, grade BWR, type BB, with decorative face veneers on both faces; handle and fixed with screws to timber frame work complete all as specified and directed
86	S & F continuous (Piano) hinges mild steel bright finsh or electro galvanised, width of flap when open 30mm complete all as specified and directed by Engr-in-charge.
87	S&F drapery stainless steel rods, standarad quality, not less than 25/28 mm dia with heads, brackets and boths ends stainless caps , etc. all as specified and direced.
88	S&F in repairvitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI "P" trap set in cement concrete fixed all as specified.
89	S & F in repair cabinet mirror of size 400mm X 500 mm fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge
90	S&F in repair looking mirror of selected quality on size600 mm X 450 mm withbevelled edge mounted 6 mm thick commercial plywood and aluminium channel of required size fixed to PVC plugs with chromium plated brass screws and cup washers all as directed.
91	S&Fin repairtubular towel rail stainless steel20mm dia "D" type 60cm long between flanges complete all as spd & dir by EIC.
92	S & F in repair corner glass shelf 200 mm with Abs brackets complete all as specified and directed by Engineer-in -Charge
93	S&F in repair chromium plated fancy type soap dish complete all as specified and directed
94	S&F in repair vitreous china wash down water closet pan (pedestral pattern), white (excluding fixing bolts ,flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etccomplete.
95	S&F in repair vitreous china wash hand basin coloured counter flat back of size 550x400mm, long screwed shank fly nut flangeend including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
96	S&F in repair vitreous china wash hand basin coloured counter top (bowl type/oval shape) of size 560x450mm, long screwed shank fly nut flangeend including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
97	S&F in repairs grating doom CP 100 mm diawith waste hole complete all as specified and directed
98	S&F in repair stainless steel trap with grating round or square 150mm size (minimum weight 100gms) complete all as specified and as directed by Engineer-in-charge.
99	S & F in repairs 32 mm PVC waste down pipe suitable for WHB and urinal complete all as specified and directed by Engineer-in-charge
100	Supply and fixing in repair hot and cold WHB mixer cast copper alloy chromium plated quarter turn screwed down for pipe of15mm bore complete all as specified and directed by Engineer in Charge
101	S & F in repairwall mixer with "L" bend 115 mm long full system brass ( cast copper alloy) chromium plated, mixer for mixing hot & cold water, screwed down for iron pipe 15 mm borecomplete all as specified and as directed by Engineer-in -charge
102	S&F in repair health faucet with CP flexible cord fixed on wall complete all as specified and directed by Engneer -in-Charge
103	S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacitylow level, white, with inlet ball valve, float, handle, and connection to pipesand flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.
104	S&F in repair CP towel ring of size 150 mm decorative type fixed with walls complete all as specified and directed by Engneer -in-Charge
105	S&Fin repair PVC connections 15 mm size with PTMT nuts of length 450 mm long all as directed.
106	S&F in repair, shower rose, 125 mm size, brass chromium plated withsweivel joint complete all as specified and directed by Engr-in-charge.
107	M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
108	Dismantling water tank exc 250 but n. exc. 500 litre capacity any type and remove from sitecomplete all as specified and directed by Engineer-in-Charge.
109	Dismantlingwater tank exc 500 but n. exc. 1000 litre capacity any typeand remove from sitecomplete all as specified and directed by Engineer-in-Charge.
110	S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed by Engineer-in-Charge. .
111	S&F for Rotational moulded polythene water storage tank 1000 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed by Engineer-in-Charge. .
112	S&Fin repairs20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (minimum weight 15mm-142 gms/20mm-210 gms/25mm-455gms)
113	S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
114	Demolition of cement concrete in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified.
115	M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
116	M&L pre cast PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in kerb stone size 300 mm x 300 mm x 100 mm with plain fair face, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed.
117	M&L Machined pressed precast concrete interlocking paver block glossy with grey cementand pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with over Fazilka sand cushion all as specified and directed. (Sand will be measured and paid seperatly)
118	Suply onlyFine aggregate (sand) for Cushioning (Fazilka sand) all as specified and directed
119	M & L Plain Cement Concrete type B-2 1:2:4 using 20 mm graded stone aggregate as in 40 mm thick flooring finished surfaces even and smooth without using extra cement complete for all as specified and directed
120	Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as directed.
121	S & F pre- painted galvatume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
122	S & F pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
123	Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in sof / loose soil all as directed.
124	Removal of excavated surplus spoil to a distance n.exc 50m and deposting where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-chargeq
125	Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm any type of soil complete all as specified and directed by Engineer-in-Charge
126	S & F for 2 mm thick fibre glass reinforced translucent plain sheeting with 15 cm side lap fixed with coach screw and washer in roof, wall etc
127	M&L for PCC 1:2:4 type B1 using20mm graded aggregates as in benching / haunching ofmanholes including forming channels including necessary formwork etc.
128	M&L for PCC 1:2:4 type B1 using20mm graded aggregates as in coping and the like including weathering slightly rounded or chamfered angles and throating, as directed including necessary formwork etc.
129	M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc), chajjas, shelves and similar articles with plain faces all as directed
130	M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge.
131	Supply and laying DWCPE (SN8) 150 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenchesand including over 100 mm moorumbed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge. Note:DWCPE pipe should be ISI marked as approved by Engr-in - Charge.
132	Dismantling wall and Ceiling boards (Fibre, pulp,insulation etc) or insulation boards/slabs/ blankets of any thickness including cover fillets complete all as specified and directed.
133	S&F armstrong mineral fiber accoustical suspended ceiling system with ANF(Micro look) EGE tiles with arm strong silhouette exposed grid. The tiles should have humidity resistance (RH) of 90%. NRC 0.5%. Light reflectance shall be more than 85% thermal conductivity K=0.052-0.057 w/mk. colour shall be white, fire perfomance class 0/class 1 (BS 4760 in module size of 600mmx600mmx15mm with bioblock coating on the face of tiles. suitable for green building application with recycle content of 63% the tiles shall be laid on arm strong silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white/black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68kg/sqm.silhouette , main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction. the Tee section hace a galvanised of 125gms/sqm complate all as specified and directed by Engineer-in-charge.
134	Dismantling timber scantling 40 Sq cm and over in section framed work, in any position
135	S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactuers complete all as specified & directed. (Aluminium snap beading & neoprene gasket/rubber packing not included in this items
136	S & F powder coated standard aluminium anodised grill size of mesh 75 mm x 75 mm and 8 mm thick section using U channel 25 x 12 mm all as specified and directed.
137	S & F 4 lever brass body mortice lock, vertical type, size 100 mm complete all as specified and directed.
138	S & F Door closer Aluminium (Die cast) body hydraulically regulated designation No 3 Universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
139	E/M Portion Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately),and making good disturbed surfaces of walls, floors etc to match with existing surfaces.
140	Taking down MCB with sheet metal enclosure, main switch, DB, etc and making good disturbed surfaces to match with existing surfaces.
141	Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces
142	M&L for concealed Point wiringfor one light point controlled by one, oneway switch with single core PVC insulate, unsheathed multistranded copper conductorcable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit20 mm dia concealed on wall/ceiling/floorincluding PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washercomplete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering andpaintingto match with the existing colour.
143	,--ditto--- all as per Serial item No 143 above, but for One ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-Charge.
144	,--ditto--- all as per Serial item No 143 above, but for One bell/buzzer point controlled by one bell puch complete all as specified and directed by Engr-in-Charge.
145	,--ditto--- all as per Serial item No 143 above, but for One 3 pin 5 amps switch socketon same board with other switches complete all as specified and directed by Engr-in-Charge.
146	,--ditto--- all as per Serial item No 143 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.
147	,---ditto-- all as per item No.143above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathedcopper conductor earth wire for two in one 5 pin 15 Amp socket outlet on indep board.
148	Supply and fix switch, piano type, Single pole, one way 5/6 Amp rating 230/250 volts grade on top covers (catered in point wiring above)
149	Supply and fix piano socket 2 in 1, 2/3 pin 6 amp flush type 250 volts AC complet all as specified and as directed
150	Supply and fix piano socket 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complet all as specified and as directed
151	Supply and fix piano swith 15 amp flush type 240 Volts AC complet all as specified and as directed
152	S & F LED light fitting 1 x 20 W, 230 V integral sleek polycarbonate LED Channel with white acrylic cover incl making connection complete.
153	S & F LED 2 x 2 flat panels to enhance the delight of occupants with fittings recess mounting complete all as specified and as directed.
154	Supply and fix lamp holder insulated body with back plate for angle/batten fitting with LEDof 09 watt complete all as specified and as directed.
155	Supply & fixingbell push switch 6A,all as specified and directed by Engineer-in- Charge
156	Supply and fix bell AC 230 vott single pole complete all as specified and directed
157	Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
158	Supply and fix fan regulator electronic solid state with steps suitable for 1200/1400mm sweep ceiling fan working on 230 volt AC complete all as specified and directed
159	Supply and fix verticle MCB DB TPN 415 volts 4 way with 200 Amps bus capacity double door incl fixing on wooden board or recessed on wall complete all as specified and as directed
160	Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way double door with 200 Amps rated busbarflush/surface mounting double door complete all as specified and directed
161	Supply and fix MCB SP 240 volt 5-32 amp 10KA complete all as specified and as directed.
162	Supply and fix MCB SP & N240 volt 5-32 amp 10KA complete all as specified and as directed.
163	Supply and fix MCB SP240 volt 40 amp 10KA complete all as specified and as directed.
164	Supply and fixing PVC Blanking Plates one way with internal lock complete all as specified and as directed.
165	Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed(FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories suitable size with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
166	M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead ofGI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item.(iii) Water pipe shall be provided in slanting position
167	Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbarflush/surface mounting double door complete all as specified and directed
168	Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule "A"/BOQ