|
| 1 | Taking down GI tubing 15mm dia and connection including removable to store complete all as specified and directed. |
| 2 | Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittingssuch as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall complete all as specified and directed |
| 3 | Refixing only 15mm tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed. |
| 4 | M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete. |
| 5 | S&F in repair CP single lever wall mixer with provision of over hear shower complete with 115 mm long bend pipe connecting legs & wall flange of make Jaguar cat part no OPP-15117PM or equivalent in Parryware/Hindware/Prayag |
| 6 | S&F in repair CP lever sink Mixer with swinging spout on upper side (wall mounted model) with connected legs & wall flanges of make Jaguar cat part No LYR-38165 or equivalent in Parryware/Prayag/Hindware |
| 7 | S & F in repair 15 mm bore CP fancy type 2 in 1 bib tap longbody cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 8 | S&F in repair 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 9 | S & F in repair 15 mm bore CP fancy type bib tap longbody cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 10 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 11 | S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed. |
| 12 | S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 13 | S&Fas in repairs.Vitreous China wash down water down water closet pan (pedestal pattern- P trap), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 14 | S & FVitreous china wash hand basin, white, flat back of size 450 mm x 300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32 mm dia and PVC connection 15mm size 450 mm length with PTMT nuts,complete all as specified and as directed. |
| 15 | S&F in repair Stainless steel sink with draning board, made out of 1.00 mm thick sheet with waste fitting, cast iron cantilever brackets, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160mm complete all as specified and directed by Engineer in Charge.(Make : Bluestar,Nirali or equivalent.) |
| 16 | S&F in repair 600mmx450mm bevelled edge mirror ofselected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 17 | Supplyand fix 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 18 | S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. |
| 19 | S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. |
| 20 | S&F in repairs PVC (SWR) bend with access door of110mm bore complete all as specified. |
| 21 | S&F in repairs PVC (SWR) bend with access door of 75mm bore complete all as specified. |
| 22 | S & F in repair 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 23 | M&L for rendering10 mm thick onconcrete surface in cement mortar (1:6)as backingcoatand 5 mm th in CM 1:4 using finishing the surface even and smoothwithout using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction completeall as specified and as directed on External surface. Note:- WPC will be measured & Paid separately |
| 24 | Supply only for water proofing compound. |
| 25 | M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed. |
| 26 | M & L for rendering 05 mm thick in CM 1:3 on ceiling surfaces of cement concrete and finished the surface even and smooth without using extra cement complete all as specified & directed . |
| 27 | Complete removal existing treatment and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed. |
| 28 | M & L for preparation of new plastered/concrete surfaces of walls and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified. |
| 29 | M & L for preparation of new plastered/concrete surfaces of ceiling, applying three coat of white wash on the surfaces of ceiling completeall as specified and directed by Engr-in-Charge. |
| 30 | M & Lfor preparation of old decorated surfaces(plastered or unplastered) and applying two coat of white wash on the surfaces of ceiling completeall as specified and directed by Engr-in-Charge. |
| 31 | M&L for preparation of new plaster external surface of wall and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer,complete all as specified and directed. |
| 32 | M&L Precast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) including demolition of Precast cement concrete block walling in any position and Including removal of debries out side MoD land complete all as specified and directed. |
| 33 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 34 | Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed. |
| 35 | S&F MS flat iron such as small articles for hold fast and similar work all as specified and as directed by Engineer-In-Charge. |
| 36 | M&L PCC (1:2:4)type B1 (20mm graded Aggregate) for fixing hold fast complete all as specified. |
| 37 | Supply and fixing2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 38 | S&F 35 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed |
| 39 | Supply and fixing2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats. |
| 40 | Supply and fixing 2nd class HW 35mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares(without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 41 | S & F 30mm thick II class HW Glazed and skeleton windows, ventilators, etcare provided with stiles and rails with sash bar complete all as specified in SSR PartI section 8 clause 8.24 (b) complete all as specified and directed. |
| 42 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed |
| 43 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour(colour will be approved by Engineer-In-Charge) PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 44 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 45 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified |
| 46 | M/L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified and directed |
| 47 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frameexc 0.50 sqmcomplete all as specified and directed |
| 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 49 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed |
| 50 | M&L for preparation of new steel surface and applying of two coat of synthetic enamel paint over a one coat of red oxide exc 10cm width or girth all as specified and directed by Engr-in-charge. |
| 51 | Supply and fixing 250mm long MS sliding door bolt, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of siz bolt & nuts four on bolt & two on staple,ISI marked, complete all as specified and directed. |
| 52 | S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 53 | S & Fin repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and as directed. |
| 54 | Supply and fixing 100mm size butt hinges cold rolled medium weight, ISI marked complete all as specified and directed. |
| 55 | Supply and fixing200mm size extruded aluminium tower bolt , fabricated type, anodisedcomplete all as specified and directed. |
| 56 | Supply and fixing 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 57 | Demolition of plain cement concrete (unreinforced) in ground floors or sunken floorsand pavings nexc 15 cm thickness (below or above ground level or sunken floors) complete all as specified and as directed. |
| 58 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection/pathincl finishing even & smooth with using extra cement in, complete all as specified and directed. |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 60 | M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 61 | M&LGlazed ceramiccolour tiles of size 300 x 450 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. |
| 62 | M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 63 | M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, dado , skirting and riser etc, set and jointed in cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed |
| 64 | Non Skid tactile tiles10 to 15 mm thick, coloured (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchbedded over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Eingeer-in-charge. Make Johnson (endura) or equivalent |
| 65 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed ineat cement slurry in floors with grey pigments cement and pigments and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed. |
| 66 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 67 | M/L Cement concrete in foundations filling and mass concrete Type C-2 1:3:6( 40 mm graded aggregates ) |
| 68 | S&F in repairsPVC valveless , syphonic action flushing cistern single piece slim conceled cistern body with installation kit & S type drain pipe connection set for wall hung WC (with flush control panel), low level, with inlet and including conceiling into wall and making good the wall surface and PVC flush pipe (make Jaquar model no JCS-WHT-2400S) complete all as specified. |
| 69 | Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil. |
| 70 | M& L for Machine cut kota stone slabflooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 71 | M& L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10 mm thick baking course in CM 1:4complete all as specified and as directed. |
| 72 | M&L for vitrified tiles light Shade (Square/rectangular)polished area of each tiles exc 0.36 sqm but nexc 0.42 sqm in floors laid over and incl. 15mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles. |
| 73 | All as Per Item No 72 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 |
| 74 | S&F anodised slidingdoor shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 nos in each door, anodised aluminium snap beading screws etc complete all as specified |
| 75 | S&F aluminium guide rail three track having two PVC wheel 50 mm dia for smooth functioning of cupboard/door shutter approx length 1.60 mtr complete all as specified and directed |
| 76 | S&F compacted recessed handle of size 150 mm suitable for sliding door complete all as specified and directed |
| 77 | S&F for push type lock system suitable for sliding doors with all necessary fitings complete all as specified and directed |
| 78 | S&F Aluminium alloy, anodised, sliding door bolt with haspstaple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 79 | Prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete |
| 80 | M&L for solar control film/film with geometric design 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed |
| 81 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed |
| 82 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed |
| 83 | M&L Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 84 | M&L Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
