Military Engineer Services-MES has published Tender For Certain B&R Repair To Flooring, Joinery, Roof Plumbing, Work To Offr Mess, Jco Mess And Certain Other Bldgs Of Fad Under Age B&R-Ii Under Garrison Engineer (South) Bathinda At Bathinda Military Station. Submission Date for this Tender is 06-09-2023. Building Work Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Aug-2023 | CERTAIN CHANGES IN BOQ | Other | 06-09-2023 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed. |
| 2 | Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) complete all as specified and directed . |
| 3 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156.complete all as specified and as directed. |
| 4 | Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed . |
| 5 | S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed . |
| 6 | S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed . |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frame)exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed. |
| 8 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. |
| 9 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified and directed (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. |
| 10 | S&F 35mm thick panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I). |
| 11 | Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. Note - Wire gauze / glass to be measured and paid separately |
| 12 | Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed. |
| 13 | M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed. |
| 14 | Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and refixing in the same opening etc complete all as specified and directed. |
| 15 | Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfacescomplete all as specified and as directed. |
| 16 | S & FMS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed. |
| 17 | S&F in repairsMild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified |
| 18 | S & F in repair (fixing with screws or welding as per site requirement) 300mmmild steel ordinary rat tail rodsprings (Helical Springs), including roller & roller plate complete all as specified and directed. |
| 19 | Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified |
| 20 | Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified |
| 21 | Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and as directed |
| 22 | Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 23 | Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and as directed . |
| 24 | Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed. |
| 25 | Material and Labour for joint free glazed ceramic coloured (Designer tiles for wall) tiles of approved quality in vertical surfaces ofexc 0.11 sqm but not exc 0.18 Sqm x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed. |
| 26 | Material and labour Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, size of tile 600x 600x10mm thick,on 15mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 27 | Description all as per Ser item No 26 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as direcetd by the Engineer-in-Charge. |
| 28 | Demolition of cement concrete (unreinforced) including tiles of any description etc.not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 29 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps (in single piece), , window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and incl 15mm thick screed bed in in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed. |
| 30 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 31 | M&L for 20 mm thick Kota stone slabs in steps \ landing of staircase, mirror polished laid over 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 32 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 33 | Dismantling boarding, any description, fixed in any position with nails complete all as specified. |
| 34 | S&F anodized aluminium window glazed/gauged shutter/ventilators shutters/Partitionfixed type w/o sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etcin repair complete all as specified.directed by Engineer - in - Charge. |
| 35 | S&F 9 mm prelaminatedparticle board,interior grade,prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge |
| 36 | Material and labour 75mm thick,cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed. |
| 37 | Supply and fixing in repair bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed . |
| 38 | Supply and fixing in repair 15mm bore pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 39 | S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule completeall as specified and directed . |
| 40 | Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed . |
| 41 | S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed. |
| 42 | Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed. |
| 43 | Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed. |
| 44 | Supply and fixing in repair stainless steel, Chromium plated, decorative type, soap dish holder fixed to wall with Chromium plated brass screwes including plastic gutties complete all as specified anddirected . |
| 45 | S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed completeall as specified and directed . |
| 46 | S & F in repair 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood with aluminium beading 15x15mm and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 47 | S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 48 | S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding0.50 Sqm in each pane complete all as specified. |
| 49 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed. |
| 50 | M&L for 20mm dia fancy type PVC coated MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified.Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account. |
| 51 | Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipesand connection including cleaning for refixing or removal complete all as specified and directed. |
| 52 | Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed. |
| 53 | Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed . |
| 54 | Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed . |
| 55 | Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clampscomplete all as specified and directed. |
| 57 | S & F 110 mm bore, PVC (SWR) fittings such as bends, tee,shoe etc;fixed to PVC pipes, complete all as specified and directed. |
| 58 | S&F in repair vitreous china (white) squatting pan "Orissa" pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concretecomplete all as specified and directed. |
| 59 | Supply and fix in repairs; vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed patternincluding bolts, flush pipe of polyethylene of low or high densityPVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed. |
| 60 | S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed. |
| 61 | Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed . |
| 62 | Dismantling and disconnecting of existing CI soil vent pipe 100 mmbore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. |
| 63 | Dismantling and disconnecting of existing CI soil vent pipe 75 mmbore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. |
| 64 | S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed. |
| 65 | S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed. |
| 66 | S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed. |
| 67 | S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed. |
| 68 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed. |
| 69 | Material and labourfor 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed. |
| 70 | Supply only intergral water proofing compound complete all as specified and directed. |
| 71 | Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other thenfair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 72 | Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 73 | M & L for preparation of new plastered surafaces of wallsand applying two coats of oil bounddistemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred. |
| 74 | Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation ofsurfaces, complete all as specified and directed. |
| 75 | Material and labour for applying two coats of cement base paint over a coat ofprimer onnewly plastered wallsurfaces including cornices & pillasters etc as per manufacturer"s specifications & instructions including preparation of surface, complete all as specified and as directed. |
| 76 | Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. |
| 77 | M&L brick work with sub class "B" old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks. |
| 78 | M&L brick work with sub class "B" old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 79 | Dismantling existing broken unserviceable PVC tank of capacity 1000 Ltrs. |
| 80 | Supply and fixing in repair three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed. |
| 81 | Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs. |
| 82 | Supply and fixing in repair three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed. |
| 83 | Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed. |
| 84 | Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed. |
| 85 | Supply and fixing in repair 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed . |
| 86 | Supply and fixing in repair 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed . |
| 87 | S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed. |
| 88 | Dismantling of wall and ceiling boards (fibre, pulp,insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed. |
| 89 | S&F tee Grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting consisting angle cleats of size 25mm wide 1.6m thick with flag fixed to RCC ceiling with door fasterner or wrapping the suspending wire around the existing wooden/steel/purlin/rafter for suspending grid frame work of size 605mm x 605mm c/c on main Tee and fixed to T-grid as per manufacturer"s instructions.The section of main Tee 37mm x 24mm x 0.60mm and perimeter angle 24mm x 24mm x 0.50mm thick shall be fixed to wall with GI screws 40mm long and 450mm c/c along the perimeter of wall all as per manufacturer"s instructions. |
| 90 | M&L 12mm thick perforted particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, fixed in existing ceiling flat or sloping complete all as specified and directed |
| 91 | S&F Hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site etc incl 5mm thick PVC sheet in strips at the edges as per specifications complete all as specified and directed. |
| 92 | Dismantling old asbestos cement, corrugated or semi-corrugated sheets in roof covering complete all as specified and as directed by Engineer-in-Charge. |
| 93 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 94 | S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 95 | Excavating in post holes (or similar holes) each not exc 0.5 Cum in any type of soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface. |
| 96 | M&L for providing PCC 1:4:8type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concretecomplete all as specified and as direcetd by the Engineer-in-Charge. |
| 97 | M&L forRolled mild steel as in roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings & heavy bracket frame (beam, tee, angle channel or flat section) in distance pieces, cleats etc confirming to Fe-410-W(grade-250, quality"A") including one shop coat of zinc chromate primer paint before fixing in position. |
| 98 | M&L for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S. |
| 99 | M&L for MS Screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 22.5 cm but not exc 30 cm and dia of sank 16 to 20 mm. |
| 100 | M&L painting with synthetic enamel paint two coatsincluding redoxide and preparing the newsteel surfaces of any description over 10cm in width or girth. |
| 101 | M & L for greasing and oiling for rolling shutter of any type and size to free moving / openingcomplete all as specified and directed. |
| 102 | Complete removing of old roof treatment from brick/concrete surfacesincluding removal of grass roots, hedges/plant roots complete all as specified and directed. |
| 103 | Cutting groves in brick wall 75 mm wide and 65mm deep and shaping horizontal face of groove and filled (after inserting of felt) in cement mortar 1:3 etc complete all as specifed and as directed by Engineer-in-Charge. |
| 104 | M&L screed bed or bedding layer of mortar 1:4 of 15mm thick as on roof surfaces parapet or vertical beam surface (horizental or vertical) of finish even and smooth witout using extra cement. Note using only course sand (Toka sand) in screed bed/plastering. |
| 105 | Preparation ofRoof / wall concrete/plastered surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.40 Kg/Sam followed by APP modified five layer polymeric membrane 3mm thick, minimum wt 3.50 Kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sam) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufacturers instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and directed. |
| 106 | M&L for cement concrete tiles 25cm x 25cm x 22-25 mm thick, machine pressed as approved, set, jointed and pointed in neat cement slurry as in roof slab etc |
| 107 | M&L for Hardcore of broken bricks gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr-in-charge.. |
| 108 | M&L 25mm Sand filling under floors or in foundations including watering andconsolidation |
| 109 | S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade |
| 110 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 111 | Note:- Net contract sum shall be calculated after deduction of Sch of credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
