Urban Development Department-UDD has published Tender For Development Of Parking Near Monal Cafe, Dhalpur Kullu Phase-Iii ( Security Cabin Toilet). Submission Date for this Tender is 23-08-2023. Shed Construction Tenders in kullu Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: Lintels, beams girders bressumers and cantilevers upto floor two level: concrete beams and plinth beams of security cabin |
2 | Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :Column, pillars, posts and struts upto floor two level for security cabin |
3 | Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level Tor Steel |
4 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Floors etc.upto 200mm. In thickness |
5 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Sides and Soffits of beams, beam haunchings, contiliver girders, bressumers and lintels not exceeding 1 Metre in depth: |
6 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Sides and Soffits of beams, beam haunchings, contiliver girders, bressumers and lintels not exceeding 1 Metre in depth:Columns,pillars,posts and struts: Square,rectangular or polygonal in plan |
7 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Columns,pillars,posts and struts:Circular or curved in plan : |
8 | Brick work using common burnt clay building bricks in foundation and plinth in Cement mortar 1:3 ( 1 Cement : 3 Sand) in Super-structure above plinth level upto floor two level (First class bricks) |
9 | 20mm Lime plaster in two coats,backing coat 10mm thick with 1:3 (1 lime:3 surkhi)mortar and finishing coat 10mm thick with 1:2(1 Lime: 2 sand) mortar on fair side of brick/stone masonry/concrete wall for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth |
10 | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement :2 sand) 100 mm dia. |
11 | Making khurras 45x45cm with average minimum thickness of 5 cm. cement concrete 1:2:4 (1 cement :2 sand: 4 stone aggregate of 20 mm nominal size) finished with 12 mm cement plaster 1:3 (1 cement : 3 sand ) and coat of neat cement rounding the outlet complete |
12 | Providing and fixing on wall face C.I.rain water pipes including filling the joints with spun yarn and cement mortar 1:2 (1 cement :2 sand) 100mm |
13 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3 |
14 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. compl 110mm x 90mm |
15 | Providing and fixing stoneware gully trap grade "A" complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg. Square Mouth Traps : 100mm x 100mm size P Type |
16 | Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately Orissa pattren |
17 | Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : Solid Type (a) White plastic seat & cover |
18 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws :-600mm x 20mmm |
19 | Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws Plastic container |
20 | Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:-Flat back630mmx450mm |
21 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.110 mm dia. |
22 | Providing lead caulked joints to sand cast iron cast (sun) iron pipes and fittings including testing of joints 100mm nominal size diameter |
23 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:-15mm nominal bore |
24 | Providing and fixing C.P Brass pillar tap with Capstan head 15 mm dia |
25 | Providing and fixing C.P Brass bib tap with Capstan head 15 mm dia |
26 | Providing & fixing Hindware toilet hand spray complete set including carriage of materials in all leads and lifts. |
27 | Providing and fixing C.P. stop cocks 15mm dia |
28 | Providing & fixing PTMT coloured/ white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) |
29 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors, windows , ventilators, frames & shutters including glazing with glass panes of 5.56 mm thickness( weight not less than 13.75 kg per sqm including aluminium snap beading including carriage of material in all leads & lifts |
30 | Providing and fixing Prelaminated alluminium doors & windows shutters with frames |
31 | Distempering with dry distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth. |
32 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface |
33 | Providing and fixing water tank |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail