|
| 1 | Sch \"A\" Part-I B/R work:-Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each(without taking off shutters from the frames) |
| 2 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) |
| 3 | Taking down shutters of any description exc. 1.00 sqm but not exc. 2.00sqm for refixing or removal from site all as directed. |
| 4 | S&F factory made Pressed steel frame of size 105x60x1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete and back filling ofhollow portion of frame includingfixing of hold fast with plain cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate complete all as spd and directed |
| 5 | S&F Factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 6 | S&F in repair Block boards 18/19mm thick, grade 2 quality, interior grade, commercial type, as in cupboard, shelves, shutters, cabinets etc. complete all as specified and directed. |
| 7 | M&L for 125mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 8 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel |
| 9 | S&F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed. |
| 10 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 11 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section |
| 12 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 13 | S&F 150mm long extruded aluminium alloy handles, cast type, anodised |
| 14 | Demolition of existing roof treatment of any description such as worm outtarfelt, mortar of any description & any thickness, shrubs/roots ,vegetation, tree, terracing pcc/brick tiles, concrete bedding etc as directed and Cleaning of all foreign material debris etc by brushing and dusting, washing down with water etc ,surface shall be leveled with a layer of 20 mm thick screed bed in CM 1:4 including mixed with water proofing admixture as per manufacturer\"s instructions and applying roof treatment with 03mm thick APP modified membrane with non-woven polyster reinforcement(center core)with thermal insulation with white mineral gravel finish on upper side of weight not less than 3.5 kg/sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side as per manufacturer\"s instructions over one coat of approvedcold applied bituminous oil based primer (IS-3384) @ 0.30 litre/sqm complete all as specified and directed. (Note:- WPC shall be measured and paid separately) |
| 15 | Demolition of brick or stone/block masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge. |
| 16 | M & L for Fly ash brick work, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 17 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 18 | M&L for Rendering 15 mm thick on other than fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified. |
| 19 | M & L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work, stone, concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and as directed.Note: WPC will be measured and paid separately |
| 20 | Supply only liquid water proofing compound all as specified and as directed. |
| 21 | M&L for preparation of newly plastered surfaces of wall and applying a one coat of wall care putty on the surfaces & making the surface absolutely smooth surface and applying two coat of oil bound distemper complete all as specified and as directed. |
| 22 | M&L for 3 coats of white wash on new plastered surfaces of wall including preparation of surfaces all as specified and as directed. |
| 23 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge .. |
| 24 | S&F in repair 15 mm boreCP Bib taps castcopper alloy fancy type with capstan heads (chromium plated),and with crutch or butterfly handle,screwed down , high pressure for iron pipe complete all as spd & directed. |
| 25 | S&F in repairs Viterous China wash basin, white, flat back, size 550x400mmexcluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed. |
| 26 | S&F in repair 15mm bore dia fancy type long sank and cup, chromium plated angular valves /stop valves, cast copper alloy, screwed down, high pressure ,screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed. |
| 27 | S&F in repair 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 02 nos 20mm dia tank nipple and 01 Nos 32mm dia drain plug complete all as specified in SSR Part I |
| 28 | S&Fin repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic ball screwed for iron pipe & fixed. complete all as specified and directed. |
| 29 | S&Fin repair 15mm bore Steel water tubing \"medium grade\", galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 30 | S&Fin repair 20mm bore Steel water tubing \"medium grade\", galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 31 | S&F in repair 15 mm dia PVC connection of 450mm long including PTMT nuts |
| 32 | S&F in repairs 15 mmdia Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts. |
| 33 | S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 34 | S&F in repair for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed by Engr-in-Charge. |
| 35 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete, including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 36 | S&F in repair 20mm dia Aluminium anodised tubular towel rail 600mm longD type incl a pair brackets fixed to wall complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed. |
| 38 | M&L for 1.25mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for painting and priming, Eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) with two coat of synthetic enamel paint over a coat of red oxide primer. |
| 40 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of 110mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and directed by Engr-in-Charge. |
| 43 | Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge. |
| 44 | Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge |
| 45 | M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 all as specified and directed. |
| 46 | M&L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7-8mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4) |
| 47 | M&L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors |
| 48 | M&L for Cement Concrete , 1:2:4, type B-1 using20mm graded crushed stone aggregate as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates,water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge. |
| 49 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in flooring, PCC path, plinth protection and surface finished even and fair with out using extra cement all as specified and as directed. |
| 50 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade including laid over 50mm thick sand cushion and including 75mm thick sub base of PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate complete al as specified and directed. |
| 51 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement sluary mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge. |
| 52 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement sluary mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick backing coat in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge. |
| 53 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 54 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 55 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, including grills, door, truss, gate, rafters, purlins, etc. |
| 57 | S&F mild steel TMT bars 10 mm dia and over,cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge. |
| 58 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected tocommon rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) qualityA |
| 59 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 60 | M&L for preparation of newly wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat ofpink primer complete all as specified and directed. |
| 61 | M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge .. |
| 62 | M&L for preparing old steel surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out ofsection using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer allas per drg No CEPZ/ TD/032/13 Sheet 1/2 including taking out old windows complete all as specified & directed. |
| 64 | S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified & directed. |
| 65 | S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty in squareexc 0.5 sq. m in each pane complete all as specified & directed. |
| 66 | M&L for repairing to chajjas, roof projection and facias of exposed reinforcement surface or damaged loose RCC surface including cutting down rusted/exposed reinforcement and applying one coat of cement slurry and filling with cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) and including finished with cement mortar 1:3 using coarse sand with mixing of liquid water proofing compound @2% by weight of cement or as per manufacturer instruction. Thickness of RCC member not exc 150 mm including scaffolding up to 8.0m height complete all as specified and as directed .Note : (i) No extra rates of scafffolding will be paid separately against this item. |
| 67 | S&F transparent Acrylic plastic sheet glass 3mm thick, fixed to angle iron frame upto hight 12m, complete all as specified and as directed . |
| 68 | Chipping, removing carefully concrete work by low impact hammer, breakar without damaging the structure and cleaning and disposal of debris outside the permises etc. complete all as specified and as directed. |
| 69 | Clean existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose material, dirt etc. complete and providing, applying two coats of rust remover or alkaline rust converting primer and form a corrosion resistant, insoluble and adherent protective layer, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1hour between the coats use in column, beam and slab. The location will be as approved by Engr-in-Charge. |
| 70 | Providing and applying, brush application, curing to form anticorrosive with high bond strength of anticorrosive polymer modified cementitious coating for corrosion inhibiting protection of reinforcement in two layers of total thickness of 2mm. The second coat shall be applied after 2-3 hours of first coat in column, beam and slab. The location will be as approved by Enger-in-Charge. |
| 71 | Rebuilding the section of damaged RCC elements to its original size or as directed by Engr-in-Charge in thickness exc. 40mm but not exc. 100mm by providing and casting with pre-packed dual shrinkage compensated micro concrete of minimum grade of M-40 and above including providing and fixing of watertight foam faced finish shuttering of minimum 18mm thick with supporting framework, all lead and lift, mixing, placing, deshuttering, levelling the surface by grinding off cementitious slurry of construction joints differences. In any column, beam and slab. The location will be as approved by Engr-in-Charge. |
| 72 | Rebuilding the section of damaged RCC elements to its original size or as directed by Engr-in-Charge in thickness upto 40mm in layers of not exceeding 20mm each by providing and applying ready mixed dual shrinkage compensated thixotropic mortar (PMM) of minimum grade of M40 and above, including providing and fixing of watertight foam faced finish shuttering of minimum 18mm thick with supporting framework, all lead and lift, mixing by addition of water only as per manufacture\"s recommendation, levelling the surface, curing etc complete all as per specified. |
| 73 | Taking down metal rolling shutters of any size self closed or gear type and refixing in the same opening after carrying out necessary repair as :- Oiling and greasing with approved make of lubricant to guide rail gear box etc of rolling shutter if any size including straightening of any strip, hood cover, guide rail and tightening of rolling spring complete, repair to old bevel gear box for any size of opening including replacement of old tension spring with new tension spring in the same position, complete all as per specified and directed by Engineer-in-Charge. |
| 74 | S&F Wire netting of stainless steel wire 1.23mm dia and 25mm mess (aperature) fixed to truss, ceiling, beams etc. including all laps cutting and waste including tying with annealed stainless steel wire not less than 0.9mm dia complete all as per specified and directed by Engineer-in-Charge. |
| 75 | S&F Plain mild steel wire 2.5mm dia, galvanised class 3,included straining and fixing to steel member complete all as per specified and directed by Engineer-in-Charge. |
| 76 | Sch \"A\" Part-II E/M work:-Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 77 | M&L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable withand including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 78 | All as per Srl item No 77here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed. |
| 79 | All as per Srl item No 77 here-in-before but for 5 pin 5 amps socket outlet on the sameboard with other switch complete all as specified and directed. |
| 80 | M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface tomatch with the existingsurface complete all as specified and directed. |
| 81 | S&F in repair switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed. |
| 82 | S&F in repair switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. |
| 83 | S&F in repair socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed. |
| 84 | S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. |
| 85 | S&F in repair lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specifiedand directed. |
| 86 | S&F in repair ceiling rose 65 x 50mm three terminals complete all as specified and directed. |
| 87 | S&F in repair ceiling fan regulator electronic socket type 5 atage speed variation. |
| 88 | S&F in replacement LEDbulb, B22type ,14 watt,complete all as specified and directed. |
| 89 | S&F in replacement sleek LED Battenlight fitting 4 feet long 1x20 W including LED tube 4 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed. |
| 90 | S&F in repair LED Bulkhead fitting 10 watt with PDC aluminium housing and polycarbonate diffuser with IP-66 protection all as specified and directed by Engr-in-charge. |
| 91 | Taking down ceiling fan, by disconnecting electric connection, dismantling blades and removing fan from ceiling complete all as specified and as directed |
| 92 | Re-Hanging only ceiling fan (M.D. supply) and connecting up including provision of pvc insulated seathed copper cable 3 core 0.5sqmm from ceiling rose or connector to fan including minor repairsuch as replacement of locking pin, reel insulator, bolts, nut etc. including Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. |
| 93 | M & L for providing/ cutting the round/ square hole of required size in wall finishing thedistrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller steel bodyAC ventilating fans, Single phase, 230 volts 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. |
| 94 | S&F in repairdistribution boarddouble door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed |
| 95 | S&F in repair MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of \"C\" series in distribution boards all as specified and directed. |
| 96 | S&F in repair MCB SPN 32 Amp 240 volt AC with 10KA breaking capacity of \"C\" series in distribution boards all as specified and directed. |
| 97 | S&F in replacement sub Main Wiring with two Run of single core PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm(green colour)as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete andmaking good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.Note:-Two run of submain wire (phase and neutral) and one run of earth wire including PVC conduit and accessories will be measured as one run. |
| 98 | S&F in replacement DB iron clad vertical DB double with IP-43 protection and mechnical strength as IK-09 suitable for MCCB as incomer and MCB as outgoing 415V 3 phase 50Hz 4 way complete with appropriate size of copper bus bar and netural link complete with one MCCB 3 pole 415V 100 Amps , 16KA with adjustable thermal and sdjustable magnetic release and MCB,s \"C\" curve complete all as specified and directed. |
| 99 | S&F in replacementbldg secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. |
| 100 | M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)withtop edge of the platenot less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precastPCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth workin any type of soil , removal of surplus soil to a distancen.exc 50m and connecting , testing on completion completeall as shown on electricplate No 03 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted). |
| 101 | S&F in replacement High way light fitting 150Watt, energy saving, environmental friendly, long life , exclusive innovative die-cast aluminium IP-65 protection with high power LED\"s as light source, suitable for highlighting architectural features on existing high mast poles/wall/any position or place on existing/new place and making connections with provision of PVC insulated copper conductor multistrand cable of 1.5 sqmm sizecomplete all as required at site or directed. |
| 102 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs34,361.00 and any other reduction if any from quoted amount. |
