Indo Tibetan Border Police Force-ITBP has published Tender For Construction Of 40 Men Jawan Barrack At Bameng Bop Of 54Th Bn Itb Police (Sub Head-Remaining Work). Submission Date for this Tender is 18-08-2023. Barrack Tenders in East Kameng Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Makingplinthprotection50mmthickof cement concrete1:3:6 (1 cement:3 coarsesand derived fromnaturalsources:6 gradedstone aggregate 20mmnominalsize derivedfromnatural sources)over75mmthickbedofdrybrick ballast 40 mm nominalsize,wellrammed and consolidated and grouted with fine sand, including necessary excavation, levelling&dressing & finishing the top smooth. |
| 2 | Reinforcedcementconcreteworkinwalls (any thickness), including attached pilasters, buttresses,plinthandstringcourses,fillets, columns, pillars, piers, abutments, posts and strutsetc.aboveplinthleveluptofloorfive level, excluding cost of centering, shuttering, finishing and reinforcement.1:1.5:3(1cement:1.5coarsesand (zone-III) derived from natural sources : 3 gradedstoneaggregate 20 mmnominal size derived from natural sources) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form forLintels,beams,plinthbeams,girders, bressumers and cantilevers |
| 4 | SteelreinforcementforR.C.C.work includingstraightening,cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement:4 coarsesand).Therate includesprovidingandplacinginposition 2 Nos6 mmdiaM.S.barsateverythird course of masonry work. |
| 6 | Providing and fixing 18 mm thick gang saw cut,mirrorpolished,premouldedand prepolished,machinecutforkitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mmthickbasecementmortar1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, mouldingandpolishingtoedgestogivehigh gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm |
| 7 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar locationinmarble/Granite/stonework, including necessary holes for pillar taps etc. includingmoulding,rubbingandpolishing of cut edges etc. complete. |
| 8 | ProvidingandfixingIstqualityceramic glazed wall tiles conforming to IS: 15622 (thicknesstobespecifiedbythe manufacturer),ofapprovedmake,inall colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) andjointingwithgreycementslurry@ 3.3kg per sqm, including pointing in white cementmixedwithpigmentofmatching shade complete. |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wroughtframedandfixedinposition withholdfastlugsorwithdashfastenersof requireddia&length(holdfastlugsordash fastener shall be paid for separately).local available wood |
| 10 | Providing and fixingpanelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screwsshall be paid separately)local available wood 35 mm thick shutters |
| 11 | Providing and fixing panelling or panelling andglazinginpanelledorpanelledand glazed shuttersfor doors, windowsand clerestorywindows (Area ofopeningfor panelinsertsexcluding portion inside grooves orrebatestobemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : local available wood |
| 12 | Providing and fixing glazed shutters for doors, windows and clerestorywindows using4 mmthickfloatglasspanes,including ISI marked M.S. pressed butt hinges bright finishedofrequiredsizewithnecessary screws. local available wood 30 mm thick |
| 13 | Providing and fixing ISI marked flush door shuttersconformingtoIS:2202 (PartI) decorative type, core ofblockboard constructionwithframeof1stclasshard woodandwellmatchedteak3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mmthick(forcupboard)includingISI markednickelplatedbrightfinishedM.S. PianohingesIS:3818 markedwith necessary screws |
| 14 | Providingandfixingwiregaugeshutters usinggalvanizedM.S.wiregaugeofaverage width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windowsandclerestorywindowswith hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size local available wood |
| 15 | ProvidingandfixingnickelplatedM.S.pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type) |
| 16 | Providing and fixing M.S. grills of required patterninframesofwindowsetc.withM.S. flats,squareorroundbarsetc.including priming coat with approved steel primer all complete. Fixedtoopenings /woodenframeswithrawl plugs screws etc. |
| 17 | Providing and fixing ISI marked M.S. pressedbutthingesbrightfinishedwith necessary screws etc. complete : 125x65x2.12 mm |
| 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating notlessthangradeAC10 asperIS:1868), transparentordyedtorequiredcolouror shade, with nuts and screws etc. complete : 250x16 mm |
| 19 | Providing and fixing aluminium tower bolts, ISImarked,anodised(anodiccoatingnot less than grade AC 10 as per IS : 1868 ) transparentordyedtorequiredcolouror shade, with necessary screws etc. complete : 200x10 mm |
| 20 | Providing and fixing aluminium tower bolts, ISImarked,anodised(anodiccoatingnot less than grade AC 10 as per IS : 1868 ) transparentordyedtorequiredcolouror shade, with necessary screws etc. complete : 100x10 mm |
| 21 | Providing and fixing aluminium handles, ISI marked,anodised(anodiccoatingnotless thangradeAC 10 asperIS: 1868) transparentordyedtorequiredcolouror shade, with necessary screws etc. complete : 125 mm |
| 22 | Providing and fixing aluminium handles, ISI marked,anodised(anodiccoatingnotless thangradeAC 10 asperIS: 1868) transparentordyedtorequiredcolouror shade, with necessary screws etc. complete : 75 mm |
| 23 | Providing and fixing aluminium hanging floordoorstopper,ISImarked,anodised (anodiccoatingnotlessthangradeAC10 as perIS:1868)transparentordyedto requiredcolourandshade,withnecessary screws etc. complete. Twin rubber stopper |
| 24 | Providingandfixingfactorymadepanel PVC door shutter consisting of frame made outofM.S.tubesof19 gaugethicknessand sizeof19 mmx19 mmforstylesand15x15 mmfortop&bottomrails.M.S.frameshall have a coat of steel primers of approved make and manufacture. M.S. frame covered with5 mmthickheatmouldedPVC"C" channelofsize30 mmthickness,70 mm widthoutofwhich 50 mmshallbeflatand 20 mm shall be tapered in 45 degree angle onbothsideformingstylesand 5 mmthick, 95 mmwidePVCsheetoutofwhich 75mm shall be flat and 20 mm shall be tapered in 45 degreeontheinnersidetoformtopand bottomrailand115 mmwidePVCsheetout of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheetbeprovidedasgapinsertfortoprail& bottomrail,panelingof5 mmthickboth sidePVCsheettobefittedintheM.S.frame welded/ sealed to the styles & rails with 7 mm(5 mm+2 mm)thickx15 mmwidePVC sheetbeadingoninnerside,andjoined together with solvent cement adhesive.An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc.completeasperdirection ofEngineer - in - charge ,manufacturer"s specification & drawing. 30 mm thick pre laminated PVC door shutters |
| 25 | Steelworkinbuiltuptubular(round,square orrectangularhollowtubesetc.)trussesetc., including cutting, hoisting, fixing in position andapplyingaprimingcoatofapproved steel primer, including weldingandbolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 26 | Cementconcreteflooring 1:2:4 (1 cement:2 coarsesand: 4 gradedstoneaggregate) finishedwithafloatingcoatofneatcement, including cement slurry, but excludingthe cost of nosing of steps etc. complete. 40 mmthickwith 20 mmnominal size stone aggregate |
| 27 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick |
| 28 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make incolourssuchasWhite,Ivory,Grey,Fume RedBrown,laidon20 mmthickcement mortar 1:4 (1 Cement : 4 Coarse sand), Jointingwithgreycementslurry@3.3 kg/sqmincludingpointingthejointswith whitecementandmatchingpigmentetc., complete. |
| 29 | Providingandfixingfalseceilingatall heightincludingprovidingandfixingof frame work made of special sections, power pressedfromM.S.sheetsandgalvanized withzinccoating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed totheceilingwithdashfastener12.5 mmdia x 50mm long with 6mm dia bolts, other flangeofcleatfixedtotheanglehangersof 25x10x0.50 mm of required length with nuts & bolts of required size and other end of anglehangerfixedwithintermediateG.I. channels 45x15x0.9 mm running at the spacingof1200 mmcentretocentre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixedinadirectionperpendiculartoG.I. intermediatechannelwithconnectingclips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,theperimeterofceilingfixedto wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing ofgypsumboardtoceilingsectionand perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointingtapes,finishingwithjointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"sspecificationandalso including the cost of making openings for light fittings, grills, diffusers, cutouts made withframeofperimeterchannelssuitably fixed,allcompleteasperdrawings, specificationanddirectionoftheEngineerin Charge but excluding the cost of painting with : 12.5 mmthicktaperededgegypsumplain boardconformingtoIS:2095-(PartI):2011 (Board with BIS certification marks) |
| 30 | Providingandfixingprecoatedgalvanised iron profile sheets (size, shape and pitch of corrugationasapprove d by Engineer-in-charge) 0.50 mm(+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steelgrade,5-7 micronsepoxyprimeron bothsideofthesheetandpolyestertopcoat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratchesduringtransportationandshould besuppliedinsinglelengthupto12 metreor as desired by Engineer-in-charge. The sheet shallbefixedusingselfdrilling/selftapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ verticalorcurvedsurfaces,excludingthe costofpurlins,raftersandtrussesand includingcuttingtosizeand shape wherever required. |
| 31 | Providingandfixingprecoatedgalvanised steel sheet roofing accessories 0.50 mm (+0.05 %)totalcoatedthickness,Zinc coating120 gramspersqmasperIS:277,in 240 mpa steel grade, 5-7 microns epoxy primeronbothsideofthesheetand polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 32 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 33 | 15 mmcementplasteronroughsideof single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 34 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 35 | Providingandapplyingplasterofparisputty of 2 mm thickness over plastered surface to preparethesurface evenandsmooth complete. |
| 36 | Distemperingwith 1stquality acrylic distemper(readymixed) having VOC content less than 50 gms/litre, ofapproved manufacturer, of required shade and colour complete,as per manufacturer"s specification. Two or more coats on new work |
| 37 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqmoverandincludingpriming coatofexteriorprimerapplied@2.20 kg/10 sqm) |
| 38 | Applying priming coat: With ready mixed pink or Grey primer of approvedbrandandmanufactureonwood work (hard and soft wood) |
| 39 | Paintingwithsyntheticenamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sandcastIronPorStrap,10 litrelowlevel white P.V.C. flushing cistern, including flush pipe,withmanuallycontrolleddevice (handlelever)conformingtoIS:7231,with all fittings and fixtures complete, including cuttingandmakinggoodthewallsandfloors wherever required: WhiteVitreouschinaOrissapatternW.C. pan of size 580x440 mm with integral type foot rests |
| 41 | Providingandfixingwhitevitreouschina pedestaltypewatercloset(Europeantype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handlelever),conformingtoIS:7231,with all fittings and fixtures complete, including cuttingandmakinggoodthewallsandfloors wherever required : W.C.panwithISImarkedwhitesolidplastic seat and lid |
| 42 | Providingandfixingwhitevitreouschina flat back half stall urinalofsize 580x380x350mm with white PVC automatic flushing cistern, with fittings, standardsizeC.P.brassflushpipe,spreaders with unions and clamps (all in C.P. brass) withwastefittingasperIS:2556,C.I.trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cuttingandmakinggoodthewallsandfloors wherever required : Single half stall urinal with5 litre P.V.C. automatic flushing cistern |
| 43 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: WhiteVitreousChinaSurgeontypewash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked |
| 44 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.bracketsandstainlesssteel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 45 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 46 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia |
| 47 | Providingandfixingmirrorofsuperiorglass (of approved quality) and of required shape andsizewithplasticmouldedframeof approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 48 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 49 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe |
| 50 | Providingandfixingbendofrequireddegree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729 |
| 51 | Providing and fixing collor 100 mm Sand cast iron S&S as per IS - 1729 |
| 52 | Providing and fixing trap of self cleansing design with screwed down or hinged grating withorwithoutventarmcomplete,including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 |
| 53 | Cutting chases in brick masonry walls for f o l l o w i n g d i a m e t e r s a n d c a s t iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement:3 coarsesand:6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia |
| 54 | Providing and fixing PTMT towel rail completewithbracketsfixedtowooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 55 | ProvidingandfixingG.I.pipescomplete withG.I.fittingsandclamps,i/ccuttingand making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore |
| 56 | ProvidingandfixingG.I.Pipescomplete withG.I.fittingsandclamps,i/cmaking goodthewallsetc.concealedpipe,including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore |
| 57 | ProvidingandfixingG.I.pipescomplete withG.I.fittingsincludingtrenchingand refilling etc. External work 20 mm dia nominal bore |
| 58 | ProvidingandfixingG.I.pipescomplete withG.I.fittingsincludingtrenchingand refilling etc. External work 25 mm dia nominal bore |
| 59 | Providing and fixing ball valve(brass) of approvedquality,Highorlowpressure,with plastic floats complete : 20 mm nominal bore |
| 60 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal |
| 61 | ProvidingandfixinguplasticisedPVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 62 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 63 | Providing and fixing G.I. Union in existing G.I.pipeline,cuttingandthreadingthepipe andmakinglongscrews,including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore |
| 64 | Providing and fixing G.I. Union in existing G.I.pipeline,cuttingandthreadingthepipe andmakinglongscrews,including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore |
| 65 | Providingandplacingonterrace(atallfloor levels) polyethylene water storage tank, IS : 12701 marked,withcoverandsuitable lockingarrangementandmakingnecessary holesforinlet,outletandoverflowpipesbut withoutfittingsandthebasesupportfor tank. |
| 66 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 67 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to ISstandardsandweighingnotlessthan 690 gms. 15 mm nominal bore |
| 68 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 69 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 70 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia |
| 71 | Providing and fixing PTMT soap Dish Holderhavinglengthof138mm,breadth 102mm,heightof75mmwithconcealed fitting arrangements, weighing not less than 106 gms. |
| 72 | Providing,layingandjointingglazed stoneware pipes class SP-1 with stiff mixture ofcementmortarintheproportionof1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter |
| 73 | Providingandlayingcementconcrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete asper standard design : 200 mm diameter S.W. pipe |
| 74 | Providing and fixing square-mouth S.W. gullytrapclassSP-1 completewithC.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
