Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation for foundation trenches of walls, retaining wall, fitting of column, steps, septic tank etc. Including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling dressing, watering & ramming etc. and removal of surplus earth with all lead & lifts as directed as specified in following classification of soils including bailing out water where necessary as directed and specified. Up to the depth of 2.00m below existing ground level Ordinary soil(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil |
| 2 | Earth / Sand filling in plinth in layers not more than 150 mm. Thick including carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. |
| 3 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified(b) Other than Guwahati city |
| 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) .(a) In prop 1cement: 3 sand :6 coarse aggregate by volume |
| 5 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. |
| 6 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine(A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 |
| 7 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)(I) Using Mixer Machine(B)In super structure from plinth level up to 1st floor level (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.(N) Without using admixture, plasticiser (b) M20 grade concrete or Prop. 1:1.5:3 |
| 8 | (iii) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band.(N) Without using admixture, plasticiser(b) M20 grade concrete or Prop. 1:1.5:3 |
| 9 | Extra over item Nos 2.2.1-B-(ii), above for each subsequent floor or part thereof above the first floor level.Above 1st floor level |
| 10 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank |
| 11 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank |
| 12 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face |
| 13 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in situ reinforced concrete and plain concrete works.Sides and soffits of beams, beams hunching, cantilever girders, bressumers, lintel and horizontal ties. For depth not exceeding 1.0.mPlinth level to first floor level |
| 14 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in situ reinforced concrete and plain concrete works. Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. |
| 15 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in situ reinforced concrete and plain concrete works. Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. |
| 16 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). |
| 17 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete. (a).Brick on flat soling. |
| 18 | Brick work in cement mortar with 1st class brick including racking out joints and de- watering if necessary and curing complete as directed(I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4. |
| 19 | Brick work in cement mortar with 1st class brick including racking out joints and de- watering if necessary and curing complete as directed(II) In superstructure above plinth level up to 1st floor level. (b) In proportion 1:4. |
| 20 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4.(1 cement:4 sand) |
| 21 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a)112mm thick brick/ R.B.wallabove 1st floor level |
| 22 | Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. (b) Coarse Rubble Masonry |
| 23 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant IS code for RCC works / RB walling including straightening, cleaning, cutting and bending to proper shapes and length as per the details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc complete up to plinth level. (a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars |
| 24 | Extra over item 18.1.1(a) for each subsequent floor or part thereof above first floor levelabove 1st floor level |
| 25 | Providing, fitting, hoisting and fixing of roof trusses fabricated out ofcombination of anytwo or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. (a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 |
| 26 | Steel Railing: Providing and fixing M.S. Tube Hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including, applying priming coat of approved steel primer complete as specified and directed by department. |
| 27 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (v) Size 165mm x 60mm (Double rebate) |
| 28 | Providing Pre Painted Galvanized IronSheetRoofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.)TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iv) 0.55 mm thick |
| 29 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing)at all levels including fitting and fixing self drilling, self tapping screws complete complete.TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iv) 0.55 mm thick |
| 30 | Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre CementBoard as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge.(B) Designer Ceilings of Everest make or equivalent as directed by the departement (ii) Using 6 mm thick FC Board |
| 31 | 15mm thick plaster in single coat on rough side of single or half brick wall for interior plastering including arises, internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.(A) On rough sideb) In cement mortar 1:4 |
| 32 | 65 mm thick cement concrete floor consisting of 53 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 12 mm thick wearing coarse of cement sand plastering in prop. 1:2 laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area)including curing etc. complete as directed. |
| 33 | 40 mm thick red oxide floor with under layer of 30 mm thick cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of size 20 mm and down) and top layer of 10mm thick plaster of cement red-oxide of iron per 50 kg of cement in prop. 1:3 (1 cement red oxide: 3 coarse sand) finished with a floating coat of neat cement red oxide mix of same proportion. |
| 34 | 15 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.(B) On fair side (b) In cement mortar 1:4 |
| 35 | Extra over item no 6.2.1 to 6.2.3 forplastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. |
| 36 | Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. (a) On Single coat plaster |
| 37 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. (a) On Single coat plaster |
| 38 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. (a) On Single coat plaster |
| 39 | Providing and fixing Mineral Fiber Acoustic Ceiling Tiles in 600mm x 600mm of 13mm/15mm thicknessto be placed in E- Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. Main Runner shall be placed along the shorter dimension of the area to be covered. The distance between the two Main Runners to be maintained at 1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm.E-Grid of module size 600mm x 600mm shall be supported by 4/6 mm dia G.I. wire from purlins/soffit Mineral Fiber Acoustic Ceiling Tiles of Everest Industries Limited should be placed in the E-Grid module to form a False Ceiling including the cuttings complete as directed. (A) Everest Designer Ceilings or equivalent as directed by the departement (Primered) (B) Using 15mm thick ceiling tiles |
| 40 | Providing and fixing 50mm/ 75mm thick Non asbestos Everest Solid Wall Panels (Fibre reinforced aerated cement core sandwich panels) made out of light weight fibre reinforced aerated cement/concrete core composed of port land cement, flyash, binders etc., and 4mm thick Non asbestos fibre cement Boards (Everest Wall Boards) as per IS 14862:2000 on either side of the core, having a tongue and groove on longitudinal side of the modules. These Everest Solid Wall Panels are erected / installed using galvanised iron steel tracks of 1mm thick & of size 15x50x25mm as bottom track, 38x50x38mm as top track used for fixing to the floor and top of the wall respectively. Finallygrooves of the panels should be finished with Everest recommended jointing compound.i) Using 75 mm thick SW panel of Everest make or equivalent |
| 41 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (a) Normal rangeSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make(i) Of size 400mmx400mm and above |
| 42 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. VITRIFIED (i) Normal range (Sizes 300 mm x 300mm and above)(b). Deluxe |
| 43 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (b) Executive range Somany/ Orient/Nitco/Asian Make(ii) Of size 250mmx350mm and above |
| 44 | Providing SUN ROCK HIGH CST/DEVI paver/block/ tiles of concrete grade M30 or above of approved quality, size,shape of specified thicknessover a levelling bedding layer of 30mm compact sand over a base course of WMB or PCC (Base course to be paid seperatly) including cutting where necessary finished with spreading, sweeping jointing sand and compacting the pavers using vibrating compactor as specified and directed. SUN ROCK HIGH CTS/Devi Tiles (Pavers)(a) 80 mm thick |
| 45 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.(a) 2 Track sliding window(iv) 5 mm clear glass |
| 46 | Providing, fitting and fixing anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm section of approved brands with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. (i) 6mm clear glass |
| 47 | Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levelsmade of extruded sections in the configuration of \"A\".The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement. |
| 48 | Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levelsmade of extruded sections in the configuration of \"A\".The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement.The lock rail is made of extruded hollow PVC section in the configuratino of \"H\" having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm. |
| 49 | Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ openingwith M.S. flatsat required spacingin frame all round,squre or round M.S.bars with round headed bolts and nuts or screws. I .Plain grill(c) Fixed to Brickwork/P.C.C/R.C.C. |
| 50 | Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) (c) 40 mm thick |
| 51 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) (a) Sliding door bolts (ii) 250mm x 16mm |
| 52 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) (b) Tower bolts (ii) 250mm x 12mm |
| 53 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) (b) Tower boltsiii) 200mm x 12mm |
| 54 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) (c)Door handles (iii) 150mm |
| 55 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )(m) Mortice lock vertical type (ii) 75mm(Godrej with handle(4 lever) |
| 56 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick |
| 57 | Wall painting (two coats) with acrylic emulsion paint approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) |
| 58 | Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 59 | Applying priming coat over newwood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughlycleaningoil, grease, dirt snd other foreign matter , sand papering and knotting.(a). With ready mixed paint , Wood primer (pink) |
| 60 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 61 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. |
| 62 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(i).Surfaces over 100mm in width or girth.b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 63 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. |
| 64 | Providing plinth protection with brick flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in proportion 1:2 with a floating coat of neat cement finish |
| 65 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. |
| 66 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. (a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 67 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. (a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 68 | Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following.(a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not less than 1800mm only duly slotted and bottom torqued with two numbers as stay posts.. (b). Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less than 1800mm only duly slotted and bottom torqued and splayed. (c).Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be measured and paid separately). |
| 69 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are tobe protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessarylocking arrangement on both faces, arrangement for temporary closing the gateand 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). |
| 70 | Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.)(b)Using Grading II material |
| 71 | Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD. |
| 72 | Providingfitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mma) Whiteii) Hindware make |
| 73 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately (B) Hindware make (a) White (v) Water closet SLICK \"P(Cat.No.20011) (inclusive of seat cover) |
| 74 | Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)(ii) Hindware make (a) White(i) Sleek+ PVC cistern |
| 75 | Providingfitting and fixing vitreous china flat back type lippedfront urinal basinwith standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting offittings and brackets, cutting andmaking good the walls& floors wherever required.(B) Hindware Make(a) White(iii) FB 610 x 410 x 380 (Cat. No.60002) |
| 76 | Providing vitreous Chinawash basinwith CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) (B) Hindware Make (a) White (xiii) Studio 550 x 430 (Cat. No.10096/11038) |
| 77 | Providing, fitting and fixing CP Towel railof Jaquar make complete as directed and as specified. Continental 600mm long |
| 78 | Providing, fitting and fixing of Mirror withplastic frame of size 500x400mm complete as directed and as specified. |
| 79 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.(i) Jaquar Make(a) Continental (Cat.No.ACN-1331N) |
| 80 | Providing, fitting and fixing chrome plated (CP) toilet paper holder complete as directed and specified (a) Jaquar make(iii) Queen\"s toilet paper holder(Cat.No.AQN-7751) |
| 81 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches.(i) 160mm dia. |
| 82 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches.(ii) 110 mm dia |
| 83 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iii) 90 mm dia |
| 84 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches.(iv) 75 mm dia |
| 85 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches.(i) 160mm |
| 86 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches.(ii) 110mm |
| 87 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches.(iii) 90mm |
| 88 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches. (iv) 75mm |
| 89 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches. (i) 160mm dia |
| 90 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches.(ii) 110mm dia |
| 91 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches.(ii) 90mm dia |
| 92 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches. (iv) 75mm dia |
| 93 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified a) In exposed surfaces or in trenches. . (i)160mm dia |
| 94 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. . (ii) 110mm dia |
| 95 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. . (ii) 90mm dia |
| 96 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches. . (ii) (iii) 75mm dia |
| 97 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160 mm x 110 mm |
| 98 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches.(ii) 160 mm x 90 mm |
| 99 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 110 x 75mm |
| 100 | Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches.(i) 160mm x 110 mm |
| 101 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110 mm x 90 mm |
| 102 | Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches.(iii) 110 mm x 75mm |
| 103 | Providing fitting and fixing PVC cowel of ISI make completeas directed and specified. (ii) 110mm dia. PVC cowel of ISI make |
| 104 | Providing, fitting and fixing of CP Grating to the floors complete as directed and as specified.(a) 110 mm diameter. |
| 105 | Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified.(ii) Hindware Make (a) White (i) Division Plate 680 x 300 (Cat. No.61001) |
| 106 | Construction of filter bed in Soak Pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. |
| 107 | Construction of Inspection Pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. |
| 108 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.(A) Exposed on wallsa) 50 mm dia (Medium)i) Using Tata make |
| 109 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.(A) Exposed on wallsb) 40 mm dia (Medium) i) Using Tata make |
| 110 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.(A) Exposed on wallsc) 32 mm dia (Medium)i) Using Tata make |
| 111 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.(A) Exposed on wallsd) 25 mm dia (Medium)i) Using Tata make |
| 112 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.(A) Exposed on wallse) 20mm dia (Medium)i) Using Tata make |
| 113 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on wallsf) 15 mm dia (Medium)i) Using Tata make |
| 114 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.(e) 20mm dia (Medium) (i) Using Tata make |
| 115 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary \"R\" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L. as directed and specified. (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. f) 15 mm dia (Medium)i) Using Tata make |
| 116 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)Jaquare make (a) Continental /Clarion(ii) Bibcock long thread |
| 117 | Supplying fitting and fixing chrome plated (C.P.) Stop-Cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately)Jaquar make (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread ) |
| 118 | Supplying and fitting gun metal country pit valve (full way valve)I.S.I. Makeas specified and directed. a) 50mm dia |
| 119 | Supplying and fitting gun metal country pit valve (full way valve)I.S.I. Makeas specified and directed.B) 40 mm dia |
| 120 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (a)Sintex make |
| 121 | Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed.200 Users |
| 122 | Labour for erectingand placing PCVCTankover the stagging of 5.00m up to 8.00m complete as directed. |
| 123 | Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container(container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost). |
| 124 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department, (viii) Bore hole of 250mm diameter |
| 125 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.(II) PVC PIPE,(viii) 200mm diameter |
| 126 | Supplyingfitting and fixing ISI approved PVC filter 3.00 metre long. (vi) 200mm diameter |
| 127 | Supplyingfitting and fixing check valve (non return valve) including thread to pipes. (vii) 100mm diameter |
| 128 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained |
| 129 | Flushing, clearing, washing and watering of the tube well |
| 130 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. (ii) 32mm diameter |
| 131 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed, (iii) 40mm diameter |
| 132 | Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose(Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt.Long point up to 10.00 metre. Length. |
| 133 | Wiring for light/fan/call bell point with 3x1.5sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete. Long point up to 10.00 metre. Length. |
| 134 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mmISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked)with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm.cable to third pin of the plug socket etc. as required complete, when placed elsewhere.Long point up to 10.00 metre. Length. |
| 135 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providingand fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switchboard (I.S.I. marked)with phenolic laminated sheet cover earth continuity with 2.5 sq. mmcableto the 3rd pin of the socketas required complete. Long point up to 10.00 metre. Length. |
| 136 | Extra Long point up to 25.00 metre. Length. |
| 137 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm.in flat 19 mm ISI marked casing \"n\" capping system. |
| 138 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm.cable in flat 19 mm ISI marked casing \"n\" capping system. |
| 139 | With 4 x 4 sq. mm. + earth continuity with 2x2.5 sq. mm. cable in 25 mm. ISI marked casing \"n\" capping system. |
| 140 | With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in flat 32 mm ISI marked casing \"n\" capping system. |
| 141 | With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in flat 32 mm ISI marked casing \"n\" capping system. |
| 142 | With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in flat 32 mm ISI marked casing \"n\" capping system. |
| 143 | Supplying with fitting and fixing sheet steel, phosphatised, powder painteddust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt..(ABB, Schneider MG, legrand, Hagermake)4 way TPN (4+12)double door |
| 144 | (ABB, Schneider MG, legrand, Hagermake) 6 way TPN (8+18)double door |
| 145 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series: 6 Amp to 32 Amp, (Schneider MG, legrand, Hagermake) |
| 146 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series: 6 Amp to 32 Amp, (Schneider MG, legrand, Hagermake) |
| 147 | Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. BSeries: 6 Amp to 32 Amp, (Schneider MG, legrand, Hagermake) |
| 148 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4PRCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 30mA sensitivity 4P RCBO(ABB, Schneider MG, legrand, Hagermake) 25A |
| 149 | 30mA sensitivity 4P RCBO(ABB, Schneider MG, legrand, Hager 32 A |
| 150 | 30mA sensitivity 4P RCBO(ABB, Schneider MG, legrand, Hager 40 A |
| 151 | 300mA sensitivity 4P RCBO(ABB, Schneider MG, legrand, Hager 25 A |
| 152 | 300mA sensitivity 4P RCBO(ABB, Schneider MG, legrand, Hager 40 A |
| 153 | 300mA sensitivity 4P RCBO(ABB, Schneider MG, legrand, Hager 63 A |
| 154 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure)of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB(Schneider, legrand, Siemens, Indo Asianmake)125A |
| 155 | Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 3. D Series (Legrand/ C&S or equivalent as approved by the Deptt.)63A |
| 156 | Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosureof the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 50KA(ABB, Schneider, legrand, L&T, Siemens, C&Smake) 400A |
| 157 | Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB(Schneider, legrand, Siemensmake) 125A |
| 158 | Supplying with fitting and fixing Four Pole 415V Front handle operated open execution On Load Change over switchfitted on the existing cubical panel of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider, legrand, L&Tmake)400 Amp |
| 159 | Supplying, Fabrication, Erection ,Testing commissioning of vermin and dustproof(IP-43 protection)totally enclosed cubical type compartmental floor mounting panel board of size 1450mm x 1000mm x 500mm made of 16 SWG(1.66mthick C.R. sheet and 300mm x 30mmx5mm MS Angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation Complete neatly Wiring done, with the provision for the following Electrical Accessories. Incomer 125A ,4Pole 25KA AC 415VMCCB with D.P. Handle OUTGOINGTPN MCB 5nos0-125A (Digital) Ammeter= 10-500V (Digital) Ammeter =1Ammeter Selector Switch= 1Voltmeter Selector Switch = 1Indicator Lamp (R,Y, B)= 32A Solid Lock fuse =3125/5 CT Coils =3Control Wiring =1 |
| 160 | Supply, installation & testing of Copper Plate earth station with600 mmx600 mmx3 mm copper earth plate withnecessary 40 mm dia. G.I. medium duty watering pipewith G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . |
| 161 | Extra for using salt (5 Kand Charcoal (96 Kin G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt . |
| 162 | Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.)to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 163 | Supplying & laying of25X4size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply ofBrass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. |
| 164 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV GSolid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1)1988 armoured U.G. cableU.G. cable laid in ground/partially in air (as required for termination over groundincluding excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris etto proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY240.00 Sq.mm.3 & 1/2 Core armoured U.G. cable |
| 165 | Supplying including fitting fixing of followingA.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic Ventilator DX 250 mm sweep Louver type (ORIENTmake), Brisk Air 250 mm sweep Louver type/ Trans Air 150 mm sweep (Cromptonmake), Ventil Air DX 150 mm sweep Louver type (Havellsmake) |
| 166 | Supplying including fitting fixing of followingstar rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable,as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make |
| 167 | Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.100 watt electronic modular 4 step speed control2 - module type |
| 168 | Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp |
| 169 | Supplying and fitting of 18/20 Watt CFL/LED lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt. |
| 170 | Supplying with fitting fixing of T 5 luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable,as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. BATTEN LIGHT, VECTOR 28 W TCH 207 with 1x28 W T-5/ LED Fluorescent tube. (Philips make or equivalent) |
| 171 | Supplying,installation,testing and Commission of the following indoor Recessed Mounted LED Luminaires complete with all accessories such as driver etc. In the flase ceiling type Armstronng /Gypsum or similar ceiling mouting with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department Philips lighting luminaire GreenLEDi 2000 Model DN195B LED20S-3000 PSU WH S1 /DN195B LED20S-4000 PSU WH S1 /DN195B LED20S-6500 PSU WH S1 or equivalent as approved by the Deptt. |
| 172 | Supplying, installation, testing and commissioning of the following indoor Decorative recessed mounted LED down lighter luminaries of model no. LESP 01R009XC/ LESP 01R009XN/ LESP 01R009XW/ L00957R000/ L00940R000/ L00930R000/ LD90-111-XXX-65-XX complete with all accessories such as ballast, starter etc. in the false celling type Amstrong / Gypsum or similar celing mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C. copper conductor as required and as directed by the department. (Jaquar/ LT / Wipro make) |
| 173 | Supplying, installation, testing and commissioning of the following indoor Decorative recessed mounted LED down lighter luminaries of model no. DN 393 B LED 12 S-6500 PSU WH/ D01257ROO/ D01240ROO/ D01230ROO/ CRDL 11R017HP57 complete with all accessories such as ballast, starter etc. in the false celling type Amstrong / Gypsum or similar celing mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C. copper conductor as required and as directed by the department. (Jaquar/ LT / Wipro make) |
| 174 | Supplying including installation with Mounting Accessories AC400 Z WH and AC400 CWH – Surface/ AC400B WH – Recess, connection cable,as approved by the Deptt. with 2x2.5 sqmm copper FR CABLE, testing and commissioning of the following HIGH BAY LIGHT on existing pole/ Structure including lamp, driver, ballast as required complete as directed and specified by the deptt. GreenBay Gen II/Maxolid/ Philips lighting luminaire 50 W Model BY400V LED72S CW SK PSU S2 FG WH/ BY325P LED100S CW PSE GR FG WB PB or equivalent as approved by the Deptt.(Flood Light) |
| 175 | Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to bemade to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security)and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure. 250 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change. |
| 176 | Supplying including installation, testing and commissioning of Readymade Panel board conforms to IS : 8623, IEC : 60439 made of Phosphatised powder painted wall mounting type complete with Ana log meter module cable Alley both LHS and RHS, Copper Bus bar, Din Rail, Neutral Bar, Earth Baretc. with Provision for 1 No. 4 pole MCCB as incomer and provision for 8 Nos.TP MCCB out goings as specified and directed by the deptt. and comprising of the following electrical items: |
| 177 | 1. Panel Boardup to 400 A Incomer, O/G TP MCCBs 2. Meter Module- Digital (Provision for Ammeter, Voltmeter, Selector Switch, Control Fuses, Indicating lights, MCBs etc. 3. cable Alley 8 Way for incoming 400A(Incoming and Outgoing MCCB of reqd. rating will be measured and paid separately) |
| 178 | Supplying and erection PSC pole 9.75 metre long, the pole is to be erection in 1:3:6 plain cement concrete foundation of size 1.50 m x 0.45 m x 0.45m having P.C.C base foundation 15 cm x 60 cm x 60cm including edge brick soiling and plastering above G.L. portion (0.30 metrecomplete with excavation of earth, handling of Surplus Soil, debris etc. to the proper place and refilling etc. as specified and as directed by the department. |
| 179 | Supplying and erection of H.T. stay set complete (Galvanizewith 19mm dia x1.8m long stay rod anchor plate of size 30cm x 30cm x6.4 mm thimble stay clamps tube buckle (19mmx 60c 7/3.15 mm dia G.I stay and strain insulation etc. in cement concrete 1:3:6:(1Cement:3Course sand:6graded stone aggregate 40mm nominal sizefoundation including excavation and refilling etc. as required and as directed by the department. |
| 180 | Supplying and fitting fixing of galvanised channel of 75 mm x 40 mm x 65 x 2200 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department. |
| 181 | Supplying and fitting fixing of galvanised Angle of 50 mm x 50 mm x 60 x 5000 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department. |
| 182 | Supplying and fitting fixing of 11 KV T Cross arm complete with clamps ,blots, nuts etc. as required andas directed by the department. |
| 183 | Supplying and fitting fixing of galvanised channel of 100 mm x 50 mm x 65 x 2200 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department. |
| 184 | Supplying and erection of 11 KV Pin insulator (Poly)with G.I.pin, blots and nuts coach screw etc. as required and as directed by the department. |
| 185 | Supplying and erection of 11 KV Disc insulator (Poly)45 KN with hard ware fittings etc. as required and as directed by the department. |
| 186 | Supplying and erection of 30 Amp aerial fuse complete as required and as directed by the department. |
| 187 | Supplying and fixing of 11 KV 400 A Gang operated switch with all accessories complete as required and as directed by the department. |
| 188 | Supplying and fixing of 11 KV 150 A D.O. fuse set complete as required and as directed by the department. |
| 189 | Supplying and fixing of 11 KV 5 KA Lighting arrestor (Poly)set complete as required and as directed by the department. |
| 190 | Supplying and fitting fixing of P.G. clamp for Racoon conductor complete as required and as directed by the department. |
| 191 | Supplying and string up AAAC Racoon conductor in the existing P.S.C./ M.S/ Galvanized pole with binding etc. as required and as directed by the department. Directed by the department. |
| 192 | Supplying including installation of 4\" dia. C.I. earth pipecomplete as required and as directed by the department. |
| 193 | Supplying and fitting fixing of H.T. danger plate complete as required and as directed by the department. |
| 194 | Supplying including installation of 11 KV CT/PT combine metering system complete as required and as directed by the department. (Or as per APDCL) |
| 195 | Supplying including installation, testing and commissioning ofWater Cooled caterpillar Diesel Generator set coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f.(la mounted on a1)M.S. Fabricated base frame.,2)M.S. fuel tank of required capacity.,3)Residual Silencer.,4) EMF/Standard Control Panel.5)Suitable batteries with lead.,5) First fill of lubeoil.,6)Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the following Technical Specification.. (RANGE FROM 200 KVA TO 1010 KV TECHNICAL DATAGENERATOR SET SPECIFICATIONS 1.Model.3306 - DITA GP - 42. Prime Power Rating KVA/KW.250/2003. No. of Phases.3 phase.CATERPILLAR ENGINE SPECIFICATION.1.make).2. Model.3306 - DITA GP - 43. No. of Cylinders.64. Aspiration.Natural5. Cooling.Water Cooled.6. Governor.Mechanical7. Battery Capacity Rating.120 AH 2X12 Volt.ALTERNATOR SPECIFICATION.1.make).2. Voltage Regulation.+/- 1.0%3. Insulation.Class - H.4. Standard Enclosure.IP 235. No. of Phases.3KVA250WITH AMF CONTROL PANEL |
| 196 | Supplying installation, testing, programming and commissioning of Audio equipment, Dual Channel Digital Power Amplifier, 1600 W@ 2 ohm, 1200W @ 4 ohm, 650 W @ 8 ohm per channel |
| 197 | Supplying installation, testing, programming and commissioning of Audio equipment, Dual Channel Digital Power Amplifier, 3000 W@ 2 ohm, 2100W @ 4 ohm, 1200 W @ 8 ohm per channel |
| 198 | Supplying installation, testing, programming and commissioning of Audio equipment, Frequency agile cable less microphone system including SR45 Stationary Receiver, PT45 Pocket Transmitter, SMPS Switched Mode Power Supply (EU/US/UK), C555L Head worn Microphone, 1 AA Battery |
| 199 | Supplying installation, testing, programming and commissioning of Audio equipment, Professional dynamic mic for lead & backing vocals on stage with on off switch |
| 200 | Supplying installation, testing, programming and commissioning of Audio equipment, Reference Dynamic Vocal Microphone, highest audio Performance for stage and studio. |
| 201 | Supplying installation, testing, programming and commissioning of Audio equipment,12\" two-way line-array system with 1 x 2262H Differential Drive® LF; 3 x 2408J Annular Ring Diaphragm HF on Constant Curvature waveguide; dual angle pole socket and integral rigging hardware; passive or bi-amplified operation. Black DuraFlexTM finish. |
| 202 | Supplying installation, testing, programming and commissioning of Audio equipment, Dual 18\", High Power Subwoofer; 2 x 2268H Differential Driver® LF, Rectangular, Bass Reflex Enclosure. |
| 203 | Supplying installation, testing, programming and commissioning of Audio equipment,15\" two-way dedicated floor monitor system with an 800 watt 2265H Differential Drive® LF; 2452H, 4” voice coil compression driver, 50 x 90 waveguide; passive or bi-amplified operation; compact 30o symmetrical wedge enclosure; White DuraFlexTM finish; heavy duty 16 gauge foam backed steel grille. |
| 204 | Supplying installation, testing, programming and commissioning of Audio equipment, Dual 15” Two-way Portable Speaker System, 800 watt Continuous Power Capacity. Two 15” Differential Drive Woofers and a 1.5 ” Annular Polymer Diaphragm Compression Driver, DuraflexTM- Covered 16/18 mm Plywood Enclosure, 16 Gauge Steel Grille, Die-Cast Metal Handles, dual 35mm Pole Mount Socket, Non-Skid Rubber Feet. |
| 205 | Supplying installation, testing, programming and commissioning of Audio equipment, Balanced double shielded digital & analogue audio cable , JACKET - PVC, Ø 6.0mm, purple , Conductor - trended tinned copper cables 7 x 0.25 mm (0.34mm²) |
| 206 | Supplying installation, testing, programming and commissioning of Audio equipment, Single Shielded multipair cable , 8 Core , Jacket - PVC black, ø 0.13 in (number) |
| 207 | Supplying installation, testing, programming and commissioning of Audio equipment, High flexible Speaker cable for power amplifiers up to 4000 watts , Jacket - PVC, ø 0.37 in, black ,Conductor resistance =< 1.42 Ohm /1000 ft , Conductor - Stranded bare copper cables, 25x38 AWG (24AW) |
| 208 | Supplying installation of Microphone Floor Stand , H: 890 -1600 mm, BL: 680 mm, Weight: 1.85 kg |
| 209 | Supplying installation, testing, programming and commissioning of Audio equipment,Mono Inputs- 32 Ch, Stereo Inputs- 4 Ch, Sub Group- 4(paired sends ),Master Outputs- L/R + Mono, Matrix- 11x4 standard, EQ- 2fixed, 2 Swept, Filters- 100Hz HPF,AUX Sends - 8, Mute Group- 4, FX Returns- 4 + 2 stereo inputs. |
| 210 | Supplying with fitting fixing of Trivector meter (3Ph, 4W TVM 240V 10-60A BM) with meter cabinate and supervision charge for power supply paid to APDCL as per specified and directed by the department. |
| 211 | Payment of Load security amount for total Load 180 KW etc will be paid to APDCL for power supply complete as per specified and directed by the department. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
