|
| 1 | E-Quotation |
| 2 | Providing and installing Multi Purpose Play System of overall size 6.00m X 6.5 m of height 4.0m with square/octagonal deck canopy 2 nos, FRP spiral slide of 2.1m height 1 nos, FRP wave side of 2.1m height 2 nos. and FRP rock climber and peb climber of 2.1m height or roller slide of 2.1m height 1nos. With arch frame wing 2nos, FRP bridge with steel support, step ladder 1nos, talk tube 1nos rope climber 1 nos, including pporting pipe framework should be of virgin galvanised steel confirming IS:1239, FRP should be made up of top quality polyster resin of reputed brand, virgin quality standard glass fibre should be made up of reputed brand only, Top surface of FRP should be finished with NPG UV stabilized gel coat, all nuts and bolts should be electro galvanized/ nickel chorme of reputed make, fabrication work, welded parts to be joined with electric welding and all joints shall be properly grounded and coated with epoxy sealent for rust resistance, all sharp Jedges and corners shall be properly grounded before painting. All sheet metal parts to be galvanized for rust sistance. Painted with PU paints in 2 to 3 coats after proper surface treatment on galvanized surface with table primar for long last and attractive looks of MPS including necessary transportalon with all leads and its, including fixing and installation of the MPS in C.C. M-15 blocks as directed by Engineer in charge. |
| 3 | Providing and installing Tripple Wave Slide FRP of overall size3.0 X4.5 m with platform height 2.1m with chute made up of 4mm thick FRP, slide length of 3.75m, ladder frame of 25mm NB pipe frame of 16 gauge, steps of pressed GI sheets and handrail of 20mm NB pipe, central support of 40mm NB GI pipe with galvanised steel confirming IS:1239 pipes, with all nuts and bolts should be electro galvanized/ nickel chrome of reputed make, fabrication work, welded parts to be joined with electric welding and all joints should be properly grounded and coated with epoxy sealent for rust resistance, all sharp edges and corners should be properlygrounded before painting. All sheet metal parts to be galvanized for rust resistance. Painted with PU paints in 2 to 3 coats after proper surface treatment on galvanized surface with suitable primar for long last and attractive look of equipment including necessary transportation and leads and lifts including fixing and installation of the equipment in CC M 15 blocks as directed by engineer incharge the sample of the equipment shall be approved from the executive Engineer before bringing it to the site. |
| 4 | Providing and installing Double swing of overall size 2.20m X 5.0 m of height 2.2 m with Leg support of 40mm NS GI pipe, Top bar 50mm NB GI pipe, seat made up from 10mm thick nylon reinforced rubber belt, bearing of SP. double ball bearing and with suspension of 6mm dia electro galavanized chain including pporting pipe framework should be of virgin galvanised steel confirming IS:1239, with all nuts and bolts should be electro galvanized/ nickel chorme of reputed make, fabrication work, welded parts to be joined with Jelectric welding and all joints should be properly grounded and coated with epoxy sealent for rust resistance, all sharp edges and comers should be properly grounded before painting. All sheet metal parts to be galvanized rust resistance. Painted with PU paints in 2 to 3 coats after proper surface treatment on galvanized surface with suitable primar for long last and attractive looks of equipment including necessary transportaion with all ads and lifts, including fixing and installation of the equipment in C.C. M-15 blocks as directed by Engineer in charge. The sample of the equipment shall be got approved from the Executive Engineer before bringing it to |
| 5 | Providing and installing Single sea-saw two seater of overall size 1.5 m X 4m with height of 0.60m seat made up from 3mm thick FRP, main frame of 40mm NB GI pipe, column of 50mm NB GI pipe and with Heavy duty Bush bearing with virgin galvanised steel confirming IS:1239 pipes, FRP should be made up of top quality yster resin of reputed brand, virgin quality standard glass fibre should be made up of reputed brand only, op surface of FRP should be finished with NPG UV stabilized gel coat, Bearing should be of reputed make and press fitted for smooth rotation, all nuts and bolts should be electro galvanized/ nickel chorme of reputed make, fabrication work, welded parts to be joined with electric welding and all joints should be properly grounded and coated with epoxy sealent for rust resistance. all sharp edges and corners should be properly grounded before painting. All sheet metal parts to be galvanized for rust resistance. Painted with PU paints in 2 to 3 coats after proper surface treatment on galvanized surface with suitable primar for long last and attractive looks of equipment including necessary transportaion with all leads and lifts, including fixing and installation of the equipment in C.C. M-15 blocks as directed by Engineer in charge. The sample of the equipment shall be got approved from the Executive Engineer before bringing it to the site. |
| 6 | Providing and installing four seater merry go round of overall size 1.60m Diameter with height of 0.60m, made up of 3mm Thick FRP seat, side handle of 15mm NB pipe, main frame of 20mm NB pipe and bearing of reputed ISO standardized manufacturer with virgin galvanised steel confirming IS:1239 pipes, with FRP Seat and FRP should be made up of top quality polyster resin of reputed brand, virgin quality standard glass fibre should be made up of reputed brand only, Top surface of FRP should be finished with NPG UV stabilized gel coat, Bearing of MGR should be of reputed make and press fitted for smooth rotation, all nuts and bolts should be electro galvanized/ nickel chorme of reputed make, fabrication work, welded parts to be joined with electric welding and all joints should be properly grounded and coated with epoxy sealent for rust resistance. all sharp edges and corners should be properly grounded before painting. All sheet metal parts to be galvanized for rust resistance. Painted with PU paints in 2 to 3 coats after proper surface treatment on galvanized surface with suitable primar for long last and attractive looks of equipment including necessary transportaion with all leads and lifts, including fixing and installation of the equipment in C.C. M-15 blocks as directed by Engineer in charge. The sample of the equipment shall be got approved from the Executive Engineer before bringing it to the site. |
| 7 | Providing and installing four seater family swing of overall size 2.5x2.7mDiameter with height of 0.60m, made up of 3mm Thick FRP seat, side handle of 15mm NB pipe, main frame of 20mm NB pipe and bearing of reputed ISO standardized manufacturer with virgin galvanised steel confirming IS:1239 pipes, with FRP Seat and FRP should be made up of top quality polyster resin of reputed brand, virgin quality standard glass fibre should be made up of reputed brand only, Top surface of FRP should be finished with NPG UV stabilized gel coat, Bearing of MGR should be of reputed make and press fitted for smooth rotation, all nuts and bolts should be electro galvanized/ nickel chorme of reputed make, fabrication work, welded parts to be joined with electric welding and all joints should be properly grounded and coated with epoxy sealent for rust resistance. all sharp edges and corners should be properly grounded before painting. All sheet metal parts to be galvanized for rust resistance. Painted with PU paints in 2 to 3 coats after proper surface treatment on galvanized surface with suitable primar for long last and attractive looks of equipment including necessary transportaion with all leads and lifts, including fixing and installation of the equipment in C.C. M-15 blocks as directed by Engineer in charge. The sample of the equipment shall be got approved from the Executive Engineer before bringing it to the site. |
| 8 | Providing And Fixing Air Walker With minimum height of 1.2 m and as per M S Steel framework approved by Engineer In Charge Providing adequate space for user feet to stand (minimum 250 mm in Length and125 mm in width ) painted in 3 coats Quality as per approval from Engineer In Charge.Installation To be Done in CC M15 on site as per details by Engineer In Charge.Transporting the equipment to the site and installation included.Overall Sample to be approved before bringing it to the site. |
| 9 | Providing And Fixing Chest Cum Seated Puller With minimum height of 1.2 m and as per M S Steel framework approved by Engineer In Charge Providing adequate space for user to seat (minimum 250 mm in Length and250 mm in width ) and adequate grabbing holding support painted in 3 coats Quality as per approval from Engineer In Charge.Installation To be Done in CC M15 on site as per details by Engineer In Charge.Transporting the equipment to the site and installation included.Overall Sample to be approved before bringing it to the site. |
| 10 | Providing And Fixing Shoulder builderWith minimum radius of 0.75m and as per M S Steel framework approved by Engineer In Charge Providing adequate grabbing holding support painted in 3 coats Quality as per approval from Engineer In Charge.Installation To be Done in CC M15 on site as per details by Engineer In Charge.Transporting the equipment to the site and installation included.Overall Sample to be approved before bringing it to the site. |
| 11 | Providing And Fixing Sit up BoardWith minimumheight of 0.75 m and as per M S Steel framework approved by Engineer In Charge Providing adequate grabbing holding and seating supportwith minimum length of 1200 mm and minimum width of 300 mm painted in 3 coats Quality as per approval from Engineer In Charge.Installation To be Done in CC M15 on site as per details by Engineer In Charge.Transporting the equipment to the site and installation included.Overall Sample to be approved before bringing it to the site. |
| 12 | Providing And Fixing SurfBoardWith minimumheight of 1.0 m and as per M S Steel framework approved by Engineer In Charge Providing adequate grabbing holding and standing supportwith minimum length of 250 mm and minimum width of 200 mm painted in 3 coats Quality as per approval from Engineer In Charge.Installation To be Done in CC M15 on site as per details by Engineer In Charge.Transporting the equipment to the site and installation included.Overall Sample to be approved before bringing it to the sit |
