Military Engineer Services-MES has published Tender For Repair/ Maintenance And Replacement Of Fire Pumps, Fire Pipes Lines, Fire Hydrant And Allied Works For Fire Fighting And Fire Alarm System For Tech Residential Area At Irde Under Ge (I) Rnd Dehradun. Submission Date for this Tender is 09-09-2023. Fire Alarm Systems Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-09-2023 |
| 2 | 04-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-09-2023 |
| Sl. No. | Item Description |
| 1 | Disconnecting and removing the water and electric connections carefully & Dismantling and taking out the existing electric driven MultistageSpilt casingtype pump set with 75kw/105HP, at 1500 rpm Diesel Engine (kilrloskar make) coupled with Pump having discharge at 88 mtr head model; HB60-20 from suction and delivery pipe lines transporting the pumpset to a Authoried Workshop for reconditioning of motor,Pumpand change of parts in water pump Set including fitting of mechanical seal, Replacement of flexible coupling parts and alignment of pump and motor and thorugh servicing, greasing and oiling to the pump and motor, varnishing to the motor winding including other minor work required, re-assembling the pump and Engine, transportiang the same to its orginal location, fixing in position, connecting up electrical and pipe line connection, testing and commisssionig Commissioning of pump set for satisfactory operation on its full load complete all as specified and directed. |
| 2 | Disconnecting and removing the water and electric connections carefully & dismantling and taking outthe Existing Multistage pump Spil casting set of capacity 55kw/ 75 HP, Head-88 mtr, 1500rpm from base frame including disconnection suction and delivery pipes and shifting to workshop for repair. Dismentling of pump and motor.Varnishing to the motor winding,overhaluingcomplete after through cleaning all parts of motor by kerocene oil including material and labour of replacement worn out partsit required i.e. CI implellers, CI sleeves, CI bush/bearing, MS coupling with rubber tyre/ star type CI neck ring CI center stage ring, Ball bearing DE & NDE, stud nut, bolt, washer& body packing gasketof pumpwith necessary welding machine/ grinding work if required for repair of shaft/ pump body & .re-assembling pump on base frame with proper alignment with motor including re-shifting to the same to its orginal location, fixing in position, connecting up electrical and pipe line connection, testing and commisssionig of pump set for satisfactory operation on its full load complete all as specified and directed. |
| 3 | Disconnecting and removing the water and electric connections carefully & dismantling and taking outthe ExistingMultistage pump Spil casting set of capacity 11kw/ 15 HP from base frame including disconnection suction and delivery pipes and shifting to workshop for repair. Dismentling of pump and motor.Varnishing to the motor winding,overhaluingcomplete after through cleaning all parts of motor by kerocene oil including material and labour of replacement worn out partsit required i.e. CI implellers, CI sleeves, CI bush/bearing, MS coupling with rubber tyre/ star type CI neck ring CI center stage ring, Ball bearing DE & NDE, stud nut, bolt, washer& body packing gasketof pumpwith necessary welding machine/ grinding work if required for repair of shaft/ pump body & .re-assembling pump on base frame with proper alignment with motor including re-shifting to the same to its orginal location, fixing in position, connecting up electrical and pipe line connection, testing and commisssionig of pump set for satisfactory operation on its full load complete all as specified and directed. Note: - FOR ITEM No. 1, 2 & 3 :- (i) Contractor shall take proper precautions while lifting out and removing Diesel Engine along with water pump setand acecssories from existing locationwell so as to avoid any damage .All necessary T&P and equipments required for dismental of the same arranged by the contractor at his own cost.(ii) Expendable stores like cotton waste/cleaning materials lubricants , gland packing metal filling, machinaing and transportation to and fro from site to work shop are deemed to be included in rate quoted.(iii) Minor spares Part required for repair the pump sets,motor,MS pipe,MS Nut, botls, washers ,rubber gasket joints etc and are deemed to be included in rate quoted. (vi) The rates for above items are deemed to include transportation to & fro of pumps/ motors to workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at workshop. (v)The rate quoted for the item shall include re-metaling of Pump shaft, polishing andgrinding and making standard size to match with Gun Metal Bush/Neck-ring. (vi) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers, keys for coupling, cable packing ring etc. (vii)Labour elemetns is included in unit rates. |
| 4 | Supply, installation, testing and commissioning in replacement of UNSV Single headed Stainless Steel fire hydrant landing valve type A (single head outlet)of 80mm dia landing valve with 63mm dia female outlet complete and 80mm inlet with rubber blank cap and chain as per IS 5290-1983, suitable for brigade hose of 63mm with couplings conforming to IS 903 complete all as specified and directed. |
| 5 | Supply, installation, testing and commissioning in replacement of UNSV weather proof standard fire hose box made of 16 SWG gauge MS Sheet 750mm x 600mm x 250mm with double door with 4mm thick glasses and door frame including locking arrangement by allen key, stove enamelled fire red finish with "Fire hose" marked on front and brilliant white inside yard, suitable for housing of and consisting of 2 lengths RRL hose pipe conforming to IS:636-1979 (type-II) of 63mm dia.GM instataneous male and female coupling (IS:903) and branch pipe and nozzel 12.5mm diacomplete all as specified and directed. |
| 6 | Supply, installation, testing and commissioning in replacement of UNSV 63mm nominal bore and 15m long synthetic fibre, circular woven jacketed, rubberized fabric reinforced rubber lined (RRL) fire hose pipe of approved make bearing IS : 636-1988 type A mark and having TAC and MMD approval with a pair of63 x 63 mm stainless steel instantaneous type, heavy duty delivery hose coupling (conforming to IS : 903) bound and riveted to the hose pipe with copper rivets and copper wire, complete all as specified and directed. |
| 7 | Supply, installation, testing and commissioning in replacement of UNSV Stainless steel 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS: 903).complete all as specified and directed. |
| 8 | Supply, fixing, testing and commissioning in replacement of UNSV of wall mounting swinging type First aid firehose reel with drum, hanging bracket,Thermoplastic rubber (first aid hose) as per IS 12585 20 mm dia 30 mtr length to with stand 20 kg per Sq cm working pressure fitted with gunmetal nozzle and shut off valve of any size complete all as specified. The hose reel shall be conforming to IS 884-1985 includingfor 25 mm dia MS pipe connection from riser to hose reel sockets,nipples,elbows,valve etc. Drum shall be fixed on adjoining wall through anchor fasteners/cement concrete hook or MS stand as per site requirement and the rate for fixing/hanging items in the rates quoted(for internal hydrant and one each an either side of stage)including taking down the existing one complete and depositing to MES store yard complete all as specified and directed. |
| 9 | Supply, installation, testing and commissioning in replacement of UNSV Cast Iron Butterfly Valve of size 80 mm dia ISI marked class(PN 1.6) including complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. Note :- (i) Body: Cast iron Epoxy / Powder coated as per IS: 210 Grade 220. (ii) Disc: S.G. Iron Epoxy/Power Coated as per B.S. : 2789 Grade 420/12. (iii) Seat: Nitrile rubber replaceable seat with moulded ‘O’ ring. (iv) Shaft: Carbon steel (Grade E N-8) |
| 10 | Supply, installation, testing and commissioning in replacement of UNSV Cast Iron Slim seal dual plate wafer type checkvalve of size 150 mm dia ISI marked class(PN 1.6) including cutting the existing pipe ,complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. |
| 11 | All as per Srl item No. 10 here-in-before but size 80 MM. |
| 12 | Supply, fixing, jointing and testing in replacement of Bourdon type pressure gauge with gun metal isolation cock and copper ‘U’ Tube.having calibration of 0-14 Kg/cm2 ,and 100 mm dial size complete all as specified and directed. |
| 13 | Supply, laying, jointing and testing in replacement of UNSV pressure switch PS-100 (for operation at 0-10 kg/cm2) with required fittings and accessories complete all as specified and directed. |
| 14 | Supply, installation, testing and commissioning in replacement of UNSV gun metal gate/Ball valves of size 20 mm bore with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778of following sizesincluding taking out unserviceable gate valves and depositing to MES store yard complete all as specified and as directed at site by the Engineer-in-Charge. |
| 15 | All as per Srl item No. 14 here-in-before but size 25 mm bore. |
| 16 | Supply, installed, jointing and testing in replacement of unserviceable Foot Valve of size 150 mm (6”) dia.of cast iron non return valve both ends flanged conforming to IS 4038, complete all as specified and directed. |
| 17 | Supply, installation, testing and commissioning in replacement of UNSV cast Iron Sluice Valve of 150 mm bore ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body,Confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at topcomplete all as specified and directed. Notes:- The cost of Earth work, joints & jointing materials of the sluice valveshall be deemed to be included in the quoted rates. . |
| 18 | All as per Srl item No. 17 here-in-before but size 100 MM. |
| 19 | All as per Srl item No. 17 here-in-before but size 80 MM. |
| 20 | Taking out or downdefectivesluice valve of size 150 mm borefrom main line andopening carefully old defective sluice valve of any description and in any position for and including servicing, over-hauling / greasing etc, and replacement of old unserviceable / worn out parts and reassembling the sluice valve after repair and refixing the same & testing after installation complete all as specified and directed. Note :- (i)The cost of Earth work, joints & jointing materials washers, gaskets ,necessary welding,nut,bolts ,washerand minor parts shall be deemed to be included in the quoted rates but Replacement of the defective parts i.e. stainless steel spindle of Sluice valve shall be measured and paid for separately as supply onlyunder appropriate items of Schedule ‘A’ |
| 21 | All as per Srl item No. 20 here-in-before but size 100 mm bore |
| 22 | All as per Srl item No. 21 here-in-before but size 80 mm bore |
| 23 | Supply only stainless steel spindle, heavy duty, threaded, with and including one gun metal check unit suitable for sluice valves of size 150 mm boreany descriptiondismantled/fixedunder appropriate items ofSch `A` |
| 24 | All as per Srl item No. 23 here-in-before but size100 mm bore |
| 25 | All as per Srl item No.23 here-in-before but size80 mm bore |
| 26 | Taking out or downdefective Fire hydrant valve from main line andopening carefully old defective Fire hydrant valveof any description and in any position for and including servicing, over-hauling / greasing etc, and replacement of old unserviceable / worn out parts and reassembling the Fire hydrant valve after repair and refixing the same & testing after installation complete, all as specified and directed :- (i) Spare part will be measured and paid for separately as supply onlyunder appropriate items of Schedule ‘A’ |
| 27 | Supply only Gun Metal hydrant coupling suitable for existing Fire Hydrant valve |
| 28 | Supply only Wheel suitable for existing Fire Hydrant valve |
| 29 | Supply only Gland nut of gun metal suitable for existing Fire Hydrant valve |
| 30 | Supply only Rubber packing for coupling suitable for existing Fire Hydrant valve |
| 31 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft/loose soil including forming sides and bottom surface to required levels/slops/gradients etc. complete all as specified and directed. |
| 32 | All as per item No. 32 above but hard/dense soil/PCC/Road etc, complete all as specified and directed. |
| 33 | Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and directed. |
| 34 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 meters above the starting point complete all as specified and directed. |
| 35 | M&L for sand cushioning to under ground cable provided with layer of sand 8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm complete all as specified and directed. |
| 36 | Supply and lay unreinforced pre cast concrete cable covers class LV type-1, flat, size 250 x 150 x 40 mm factory made, complete all as specified and directed. |
| 37 | Fixing / laying only old un-reinforced pre cast flat concrete/bricks cable protection cover of any description complete all as specified and directed . Note :- Oldconcrete cable protection cover retrived under item No.36 herein above shall be reused. |
| 38 | Supply, laying, jointing and testing in replacement of UNSVXLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100V grade cross section area of size 16 Sqmm 4 coreincluding making necessary connection, with busbar/MCCB/DB"s & testing complete all as specified and directed. Note :Excavation, earth work ,sand & brick will be measured & paid separately. |
| 39 | All as per Srl item No. 38 here-in-before but 25 Sqmm 3½ core |
| 40 | Supply and fixing of 4 mm plain glass along with Rubber Beating etc change in FHC complete all as specified and directed. |
| 41 | Cutting of MS pipe mains 80 mm bore at different locations for insertion ofvalve, Provided of2 Nos MS flange welded for valve cost of allincluded for Flange Packing Rubber Bolt Nut Washers. Notes:- The cost of Earth work, joints & jointing materials of the valveshall be deemed to be included in the quoted rates etc including dewatering work required for working FIREpipe lines complete all as specified and directed. |
| 42 | Material and labour for painting with two coats offsynthetic enamelled paint as per approved colour code of fire fighting Risers pipe line in fire nich ground floor to terrace pipe lines inside the shaft complete all as specified and directed. |
| 43 | Supply, installed, jointing and testing in replacement of unserviceable non return valvesofsize 150 mm bore cast iron non return valve both ends flangedcomplete all as specified and directed. Notes:- (i) The cost of Earth work, joints & jointing materials of thenon return valve shall be deemed to be included in the quoted rates. |
| 44 | All as per Srl item No. 44 here-in-before but 80 mm bore |
| 45 | Supply, fixing, testing and commissioning ofMSpipe heavy duty class "C" of size 150 mm bore as per IS: 1239 with all necessary fittings & fabrication like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required including fixing of pipe with necessary standard clamps structural steel supports as required/directed at site complete all as specified and directed. Notes:- (i) The cost of Earth workwill be measured & paid separately. |
| 46 | All as per Srl item No. 45 here-in-before but 100mm |
| 47 | All as per Srl item No. 45 here-in-before but 80mm |
| 48 | All as per Srl item No. 45 here-in-before but 25mm |
| 49 | M & L for PCC 1:2:4 type B2 with 40mm grade stone aggregate as in foundation for outstanding around pole near feeder pillar/LT panel foundation of stays, including form work, fair finishing to exposed surface complete all as specified and directed. |
| 50 | M&L for PCC 1:4:8 type D2 with 40 mm graded stone aggregate as in foundation for hard standing aroundpole& near feeder pillar/LT panel foundation of stays, including form work, fair finishing to exposed surface complete all as specified and directed. |
| 51 | M&L for PCC 1:3:6 type C2 with 40 mm grade stone aggregate for coping of poles,stays incl. form work complete all as specified and directed. |
| 52 | Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 53 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement plastering 1:4 complete all as specified and directed. |
| 54 | M&L for prepration of new plaster surfaces of wall and applying two coat of white wash complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
