Birsa Agricultural University has published Tender For Renovation Of Professor Qrt. No B2/9 At Rvc Under Bau, Kanke, Ranchi. Submission Date for this Tender is 14-08-2023. Building Work Tenders in kanke Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 3 | Providing 12mm thick plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 5 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 6 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 7 | Providing two coats of oil bound distemper of approved shade and make over old surface including washing, cleaning and papering the walls, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 9 | Providing two coats of synthetic enamel paint over old wooden surface all complete as per direction of E/I |
| 10 | Providing two coats of synthetic enamel paint or approved shade and made over steel surfaceincluding cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I |
| 11 | Supply, fitting & fixing 35 mm thick solid core type non decorative single leaf flush shutter in doors all complete as per direction of E/I |
| 12 | Supply fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celestial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I |
| 13 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 14 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 15 | Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing excluding carriage of M.S. Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wore, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 16 | Taking down chaukhats in doors including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 17 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 18 | Taking down R.W.D. pipe carefully stacking on the ground and refixing the same in proper place after cleaning at thoroughly all complete as per direction of E/I |
| 19 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I |
| 20 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and royalty all complete as per building specification and direction and of E/I |
| 21 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 22 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110MM DIA |
| 23 | 75 mm dia |
| 24 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe 110 mm |
| 25 | 75 mm dia |
| 26 | Band 110 mm |
| 27 | Band 75 mm |
| 28 | Single tee with door 110x110x110 mm |
| 29 | Single tee with door 75x75x75 mm |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction 15 MM |
| 32 | 20 MM |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK |
| 34 | Supply, fitting and fixing vitreous white glazed earthen ware E.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. ‘p’ trap 15 liters C.I. pull and let go flushing cistern of names or other I.S.S. equivalentmake, complete with all fittings, C.I. or C.C brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenwarefootrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50gms, 15mm PVC connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc., all complete as per specification and direction of E/I (i) 510mm long with 10 litre PVC low level cistem |
| 35 | Supply, fitting & fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 36 | Providing and fixing Special type of C.P, Bathroom fittings for V.I.P building (JAL, Jaquar, Marc or equivalent mark) all complete as per specification and direction of E/ Bib cock |
| 37 | Angular stop cock |
| 38 | Concealed Stop cock |
| 39 | Wall mixture with telephonic shower arrangement |
| 40 | Supply, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I (Where materials is not supplied by the deptt.) |
| 41 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 42 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 43 | Carraige OF Material SAND LEAD 30 KM |
| 44 | STONE CHIPS LEAD 30 KM |
| 45 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions ofineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 46 | Providing and fixing 4 mm thick ACP Board as per direction of E/I. |
| 47 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. |
| 48 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 49 | Wiring for light point/fan point/call bell point ,with 1.5 sq.mm FR PVCinsulated copper conductor single core in surface/recessed PVC conduit ,with modular type switch , phenolic laminated sheet with suitable size GIBOX etc as required. Group A |
| 50 | Wiring for light point/power plug with 2X4sq.mm FR PVC Insulated coper conductor single core cable in surface / recessage PVC conduit wiring along with earth wire with the following size of FR PVCas required. |
| 51 | Wiring for circuit/submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2x2.5 sq.mm +1x2.5 sq.mm earth wire |
| 52 | 2x6.0 sq.mm +1x4.0 sq.mm earth wire |
| 53 | Supplying & fixing of following modular type switch/socket on the existing modular plateand switch box including connection etc as required. a) 5/6 Amp switch |
| 54 | b)5/6 Amp3 pin socket outlet |
| 55 | c) electronic fan regulator |
| 56 | Supplying and fixing suitable size GI/PVC box of 121mmx173mmx48 mm(6’’x8’’) on surface /recesswith suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch ,connection etc as required. |
| 57 | Supplying and fixingelectronic fmusical call bell suitable for D.C/ AC SINGLE PHASE 230 VOLTS,etc as required |
| 58 | Providing and fixing of following DP sheet metal switch disconnector fuse unit in theexisting metal board with rewireable type fuse including drilling of holes in metal board making connection etcas required. 32 amps, double pole |
| 59 | Supplying , fitting and fixing of following way single pole and neutral, sheet steel MCB DB board 240 volt without MCB / Isolator 12 way double door |
| 60 | Supplying and fixing of 9" (230mm) metal exhaust fan including connection complete as required . Make - USHA/Bajaj |
| 61 | Earthing with copper plate 600mm X 600mm X 3 mm thick including accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipe etc(with charcoal or coke and salt) as required. |
| 62 | Supplying and laying of 8 SWG copper wire at 0.50 metre below ground level for conductorearthelectrode , including soldering etc. as required. |
| 63 | Supplying and fixing following 240 volts C series, miniature circuit breaker suitable for inductive loads of following poles in existing MCBDB complete with connection as required. 6/32 amps, Single Pole |
| 64 | 40 amp SPN |
| 65 | Supplying and fixing of following LED fittings complete with connection as required. Make - havells/Bajaj/jaguar/C&Sorequivalent 20/22 watt LED BATTEN |
| 66 | Bulk head fitting with 9/10 watt CFL/LED |
| 67 | FR PVC Insulated3core4sq.mmcopperwire(forfloodlight ) |
| 68 | Labour welfare fund |
| 69 | GST @ 18 % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
