Military Engineer Services-MES has published Tender For Repair And Maintenance Of Fire Fighting Equipment And Connected Works At Cvrde Avadi. Submission Date for this Tender is 21-09-2023. Fire Fighting Consumable Tenders in avadi Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Aug-2023 | Amd_1_ Critical_Dates | Date | 02-09-2023 |
| 2 | 26-Aug-2023 | Amd_2_ Critical_Dates | Date | 09-09-2023 |
| 3 | 09-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-09-2023 |
| 4 | 16-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-09-2023 |
| Sl. No. | Item Description |
| 1 | Comprehensive monthly maintenance offire fightingsystem installed at Alfa Bldg No.1Vikash Nagar Residentialarea CVRDE Avadi,.The detail scope of work consists of the following:- (i)Cleaning inspecting, checking and repairing if required all the equipments of fire detection system. (ii)100% operational of all the equipment of fire detection system should be maintained. (iii)The contractor will submit Monthly inspection report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-Charge. (iv)The maintenance shall be carried out through experienced technician. (v)Emergency visit will be carried out when called in addition to the normal monthly maintenance in case of any failure in the system due to any cause without additional cost. (vi)Spare parts required for replacement will be measured and paid separately under respective items of this schedule. |
| 2 | Comprehensive monthly maintenance offire fightingsystem installed at Alfa Bldg No.2Vikash Nagar Residentialarea CVRDE Avadi,.The detail scope of work consists of the following:- (i)Cleaning inspecting, checking and repairing if required all the equipments of fire detection system. (ii)100% operational of all the equipment of fire detection system should be maintained. (iii)The contractor will submit Monthly inspection report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-Charge. (iv)The maintenance shall be carried out through experienced technician. (v)Emergency visit will be carried out when called in addition to the normal monthly maintenance in case of any failure in the system due to any cause without additional cost. (vi)Spare parts required for replacement will be measured and paid separately under respective items of this schedule. |
| 3 | . Comprehensive monthly maintenance offire fightingsystem installed at Covetek Bldg Technical area CVRDE Avadi,.The detail scope of work consists of the following:- (i)Cleaning inspecting, checking and repairing if required all the equipments of fire detection system. (ii)100% operational of all the equipment of fire detection system should be maintained. (iii)The contractor will submit Monthly inspection report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-Charge. (iv)The maintenance shall be carried out through experienced technician. (v)Emergency visit will be carried out when called in addition to the normal monthly maintenance in case of any failure in the system due to any cause without additional cost. (vi)Spare parts required for replacement will be measured and paid separately under respective items of this schedule. |
| 4 | S&F in replacement PVC insulated FRLS type, sheathed armoured copper conductor cable of size 1.5 Sqmm2 core complete all as specified and directed. |
| 5 | Repairing, servicing and overhaulingof motor andpump 15 HP, centrifugal Pump and Squrrel Cagem indexation Motor 15 HP, 2900 RPM 3 Phase 415 Volt, 15 HHZ discharge appx 180 LPM at 17 Mtr head, multi-stageincluding disconnecting and refixing of Suction and delivery pipe, and transporting towork shop incl loading/unloading for necessary repairs such as rewinding remetaling, turning of Pump shaft, bearing case of suction & delivery and repairing/renewal of impeller, stage bush, alongwith repair/renewal of unserviceable spare parts, withnew spare parts, cast iron welding of Pump casing and making alignment, connecting to motor, testing complete, carrying back fromworkshop, re-installation of the Pump set complete with existing motor alongwith proper coupling and alignment, including satisfactory testing painting with two coats of sythentic emamil paint of colour as directed complete all as specified and directed. MAKE : Kirloskar Note : If any minor spares required for renewal such as nuts washer, small gasket, shim, rubber "O" ring and rubber gasket for filter assembly, hose pipe, all type filter element (except air filter) oil pan, gasket, fan belt,hose pipe etc clamps and cleaning materials will be incl in the cost of servicing charges |
| 6 | Taking up or down old MS pipe with all fitting from trenches in the work and removing unserviceablepipes & fittings from site a complete all as specified and directed for the following sizes :- |
| 7 | (a)100 mm dia |
| 8 | (b)80mm dia |
| 9 | Supply, laying, jointing, testing and commissioning of ISI marked MS pips class "C" duly welded the joints with and including specials etc as per IS : 1239 for under ground laying for hydrant system including transportation, provision of specials like bends, tees, reducers, flanges etc. in proper position incl all supports as directed, wrapping and coating with Pyp anticorrosion treatment as per IS : 10221 etc., providing tapping for pressure guage and other instruments, making holes/chasing in wall/ RCC slab if required, including making good to originalo surface, testing, flushing & cleaning of pipe line by water & making good the same as original for complete all as specified and directed for the following sizes:-. |
| 10 | (a)100 mm dia |
| 11 | (b)80mm dia |
| 12 | 8. M&L or spray painting after scratching and rubber for removing of old existin paint from the surface of fire fighting plant complete i.e pump , motor circulating pipe line, connetin valves, electric pannels, switches, pipe line inlet and outlet inside of pump house building etcand including applying two coats of synthetic enameled paint over one coat of red oxide primer as per colour code of system approved by Engr in charge including writing SM/MES number & marking arrow for flow of water lines inlet and outlet by white synthetic emamel colour complete all as speified and directed. |
| 13 | 9. Supply & installation, testing and comminsing in renewal of ISI marked single headed 63mm dia gunmetal landing Valve, flanged inlet with 63mm dia female intantaneous outlet confirming to IS 5290 on the fire wet riser/down comer including making 80NBpipe connection with riser fixing the landing valves in proper positions including supply nuts, bolts, gaskets, caps, chains etc. testing the hydrant and completing the work in all respect complete all as specified and directed. Make : Firex/Safex/Minimax/Newage/Kartar/GETECH |
| 14 | 10. Supply and fixing in position ISI marked cast irondouble flanged sluice valve of 100mm size rising type stainless steel spindle as per IS : 13095, suitable forpressure 15 KG/Sqcm including transporting to worksite including supply & fixing nuts, bolts, gaskets, flanges & washers etc and testing complete all as specified and directed.Make : Kirloskar/Kartar/Venus/IVC/Zaloto/Kalpana. |
| 15 | 11. Supply, fixing, testing & commisioning in renewal of 20mm bore and 30 meter long hose (Rubber lined Dunlop pipe) and hose reel drum for first aid fire fighting conforming to IS :5132, with full swing drum, fixing brackets, 5mm dia shut off gun metal nozzle, 32mm dia, hand lever operated ball valve, connecting directly from the riser through 32mm dia GI pipe with sockets, elbows, nipple etc. including providing operating instructions on a metal plate and fixing it near hose reel drum. The system shall be complete in all respects complete all as specified and directed.Make : Dunlop/Goodyear |
| 16 | 12. S&F in renewal gun metal ISI marked 63mm dia instataneous pattern short branch pipes with 16 mm dia Nozzle suitable for interconnections to hose pipe coupling complete all as specified and directed. Make : Manimax/Firex/Safex/Newage/GETECH |
| 17 | 13. S&F in renewal ISI marked RRL (IS : 636 type II) fire hose pipe 15meter long and 63mm dia with ISI marked (IS : 903) gun metal male and female coupling complete all as specified and directed. Make : Jayshree/Newage or equivalent |
| 18 | 14. Supply and fix Gun metal fire brigade in let connection for connecting to external fire hydrant ring main consisting of 4 way 63mm dia instantaneous type male coupling with built in check valves and 100mm dia, flanged outlet complete with all accessories complete all as specified and directed |
| 19 | 15 Supply & fixing in renewal of Pressure Switch complete all as specified and directed. |
| 20 | 16. Supply and fixing in renewal of weather proof standard fire hose cabinet of size 900mm x 900mm x 600mm outdoor type suitable for accommodating single headed hydrant valve made of not less than 16 SWG MSsheet having central opening glassed door of size 1mX0.3M(4mm thick clear glass) including necessary locking arrangement with two numbers MS handle of size 150mm for housing, 15 meter long fire hose pipes, branch pipe and hydrant valve as required including painting (Two coats of the fire red colour over one coat primer). The cabinet shall be mounted on brick masonry (i.e) platform (brick work with sub class "B" bricks in CM 1:4 of size 1.2M X 1M and 0.3M height, two coats of white wash over 10 mm thick rendering in CM 1:4) and supported with MS frame made of Angle iron (75X75X6 mm size) as desired. The words"FIRE HOUSE" to be painted on the box with one coat of synthetic emamel paint of red colour complete all as specified and directed. |
| 21 | 17. Supply and fixing of fire point comprising the followings complete all as specified and directed:- (a) Fire extingusher Dry Chemical powder (ABC) type 5 kg Capacity (IS : 2171/13849,14609) - One No (b)Fire extingusher CO2 type 5 Kg Capacity (IS: 2879- One No (c)Fire Axe (IS-926) - ONE No. (d)Fire extingusher Mechanical foam type, 9 capacity (IS: 10204) - 2 Nos |
| 22 | 18. Repair of Electrical panel board including replacement of U/S electrical system like CT,PT,Ammeter,selector switch etc complete all as specified and directed |
| 23 | 19. Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep in Soft / Loose soil for taking out or laying of Pipes, Cables of any size etc. complete all as specified and as directed. |
| 24 | 20. Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 25 | 21. Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 26 | Supply only Calcium hypo chlorite Granules packing size ne less than 45Kg , 65-95 concentration complete all as specifed and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
