|
| 1 | Demolition of brick work built in cement mortar. |
| 2 | Dismantling of structural steel work. |
| 3 | Demolition of cement concrete n exc. 15cm thick (unreinforced). |
| 4 | Dismantling of AC sheet (corrugated or semicorrugated) in roof coverings.. |
| 5 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m for foundation in Hard/Dense soil. |
| 6 | M/L Hardcore of gauge n.exc. 63mm deposited, spread and levelled n.exc. 15 cm thick of broken bricks. |
| 7 | M/L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar. |
| 8 | Taking down of cement plaster on brick wall including taking out joints, hacking for key, scrubbing down with water etc. alongwith brushing with neat cement slurry @ 3 Kg of cement per Sqm and Rendering 15mm thick on fair faces of brick work or concrete surfaces with 1:4 cement plaster and surface to be finished even and smooth (without using extra cement) |
| 9 | Brushing neat cement slurry with 3.0 kg per. Sqm and rendering 15 mm thick plaster on brick or concrete surface and surface to be finished even and smooth without using extra cement with 1:4 cement mortar on new surface. |
| 10 | Providing PCC 1:1.5:3 type A-1 (20mm graded aggregate) |
| 11 | Deformed or twisted mild steel bars 10mm dia and over, cut to length, bent to shape and binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 12 | Providing form work for slab & surface to be fair finished. |
| 13 | Providing RCC in slabs type M-20, 1:1.5:3 (20mm graded aggregate). |
| 14 | S&F of factory made single extruded WPC(wood polymer composite) solid color/window/ceosttory windows & other frames/chowkhat of size 50 X100 mm comprising of virgin PVC polymer of k value 58-60 (Suspension grade, calcium carbonate and natural fibres(wood powder/rice/husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star heades SS screws having minimum frame desnity of 750kg/cum, screw withdrawal strength of 2200 N (face) & 1100 n(edge), minimum compressive strength of 58 N/sqm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ SS dash fasteners of required dia. and length complete as per direction of EIC. Make- Sintex, rajshree, Dura Plast, Durian door, Ecocell. |
| 15 | S&F of factory made single extruded WPC(wood polymer compsoite) solid decorative type flush door shutter of size 30mm thick comprising of virgin PVC polymer of k value 58-60 (Suspension grade, calcium carbonate and natural fibres(wood powder/rice/husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimumdesnity of 650kg/cum, screw withdrawal strength of 1800 N (face) & 900 n(edge), minimum compressive strength of 50 N/sqm, modulus of elasticity 850 N/sqm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws as per direction of EIC. Make- Sintex, rajshree, Dura Plast, Durian door, Ecocell. |
| 16 | S/F of brass sliding door bolt of 250 mm |
| 17 | S/F of 200mm extruded handle of brass |
| 18 | M/L of 125mm size butt hinges, heavy weight, cold rolled mild steel. |
| 19 | S/F of 140 mm floor door stopper of brass body and tongue, andoised,with hard drawn steel spring, fixed in floor |
| 20 | S/F sheet glass ordinary quality and glazing in squareexc. 0.5 sqmin each pane of 5.5 mm thick. |
| 21 | Preparation of old painted steel surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss). |
| 22 | Preparation of old painted wooden surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss). |
| 23 | Applying 3mm thick wall care putty on wall surfaces with making completesmooth surface.Make:Birla /J.K.Wall Putty as directed by EIC. |
| 24 | Preparation of old painted surfaces and two coat of 1stquality premium Acrylic emulsion painton Wall and ceilingsurfaces over one coat of primer. Make: Asian (Tractor Acrylic emulsion)/ Berger (Silk Luxury emulsion) as directed by EIC. |
| 25 | Preparation of old painted surfaces and applying two coat of exterioremulsion paint on wall surfaces as approved over one coat of primer. Make: Asian (Apex Ultima)/ Berger (Weather coat all guard) as directed by EIC. |
| 26 | M & L for screed bed or bedding layer of mortar 15 mm thick cement mortar 1:4 for laying finish. |
| 27 | M & L for laying vitrified ceramictiles 10 mm thick (square/rectangular), area of each tiles n exc 0.36 Sqm in floors, skirting etc. in light colours & shades , including grouting the joints with white or coloured cement to match. Make: Johnson/ Kajaria (stainfree) as directed by EIC |
| 28 | S/F Non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floors etc. set & jointed in neat cementslurry and pointed incoloured cement and joint free. Make: Johnson/ Kajaria as approved by EIC. |
| 29 | M/L Glazed coloured ceramic digital tiles in vertical surface 350x250x7/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement. Make: Johnson/ Kajaria as approved by EIC. |
| 30 | S/F 20mm thick granite work in jambs fixing with 1:4 cement plaster including pigment. |
| 31 | M/L of Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments. |
| 32 | M/L of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes coforming to IS 1161-1979 grade St.-240. |
| 33 | S/F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of minimum 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. Make- Tata/ JSW. Color shall be approved by EIC. |
| 34 | Taking down old doors including shutter exc 1.5 sqm but n.exc.4sqm and refixing. |
| 35 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification. (Make-Sintex/Rajshree) as directed by EIC |
| 36 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail,lock rail& bottom rail; Panelling wire gauzed i.e. panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly with all fittings i.e. hinges, T bolt, handles, aldrop. (Make-Sintex/Rajshree) as directed by EIC |
| 37 | Cutting chases, pinning in and making good in 1:3 cement mortar on brick wall n.exc. 10cm girth. |
| 38 | Cutting holes in brick wall built in cement mortar exc. half brick but not exc. one brick and making good . |
| 39 | Taking down old G.I. Pipe of 15 mm dia. |
| 40 | Taking down old G.I. Pipe of 20 mm dia. |
| 41 | Taking down old G.I. Pipe of 25 mm dia. |
| 42 | S/F of cPVC 15mm dia tube medium grade with all fittings fixed complete to wall and ceiling or laid on floor. Make: supreme/finolex |
| 43 | S/Fof cPVC 20 mm dia tube medium grade with all fittings fixed to wall & ceiling or laid on floor. Make:supreme/finolex |
| 44 | S/F of cPVC Water tube medium grade with fitting fixed complete to wall and ceiling or floor of 25 mm dia.Make:supreme/finolex |
| 45 | S/Fstop valve cast copper alloy of 15 mm dia. Make- Plumber/Jaquar as approved by EIC. |
| 46 | S/F chromium plated bib tap 15mm, fancy type. Make- Plumber/Jaquar as approved by EIC. |
| 47 | S/F of Bottle Trap \" SLIM with 150mm and 250mm Discharge pipe and AdaptorMake Plumber-USB-1702 or Equivalent make and model as approved by EIC. |
| 48 | S/F of mixture divertor cast copper alloy with capstan head, chromium plated, screwed down high pressure and fixed to 15 mmdia pipe fancy type. Make- Plumber/Jaquar as approved by EIC. |
| 49 | S/F Pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure and fixed to 15 mmdia pipe fancy type. Make- Plumber/Jaquar as approved by EIC. |
| 50 | S/F Gun metal globe or gate valves with iron wheel head, screwed both end fixed to pipe of 15 mm dia. |
| 51 | S/F Gun metal globe or gate valves with iron wheel head, screwed both end fixed to pipe of 20 mm dia. |
| 52 | S & F Door closer aluminium body hydraulically regulated, designation no.3, universal type suitable for door shutters of 851 to 1000mm width & weight between 61 to 80 kg. Make Godrej/Harrison. |
| 53 | S&Ftwo way bib cock cast copper alloy fancy type chromium plated .Make :Hindware , Model: Flora or equivalent as approved by EIC. |
| 54 | S/F vitreous china table top wash basin, includingwaste pipe and all fittings and fastenings. Make Hindware, Model: Magna (10079) or equivalent make and model as approved by EIC. |
| 55 | S&F Paper holderMake: Matrix, Model: Boxeror equivalent make and model as approved by EIC. |
| 56 | S&F bathroom set (Towel rail, towel rod, towel ring, soap dish & hook) chromium plated. Make: Matrix , Model : Oscar or equivalentmake and model as approved by EIC. |
| 57 | S/F of bevelled edge mirror of selected quality glass, fancy type. |
| 58 | S&F Vitreous China commode (one piece closet) with cistern pedestal patternincludingseat coverwith all fittings. Make: Hindware, Model: Waveor equivalent make and model as directed by EIC . |
| 59 | S&F health faucet chromium plated. Make : Hindware, Model No F-160013 or equivalent make and model as approved by EIC. |
| 60 | Rotational moulded polyethylene water storage tank of 1000 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position all asspecified Make Sintex/Polyplast as approved by EIC. |
| 61 | PVC (SWR) 110 MM bore pipe single socketed with rubber ring joints fixed to wall, floor etc. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 62 | S/F PVC (SWR) bends any radius of 110 mm.Make: Supreme/Jindal as directed by EIC. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 63 | S/F PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches or in floor of 75mm dia. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 64 | S/F 110 mm dia PVC (SWR) ‘T’ single junction. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 65 | S/F stack clamps out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe. |
| 66 | S/F of Grating doom 125mm dia with waste hole of PTMT. (Minimum weight 40gms). Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 67 | S/F of PVC connections 15mm size with PTMT nuts of length 450mm. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 68 | S&F of boring 120 feet. Boring shall be done upto 140 feet depth (approx.) & will be provided with PVC pipe of 04” Bore dia and 140 feet length (Make-Supreme/Prince). Providing CPVC Column pipe 01” bore dia with 90 feet length (Make-Supreme/Prince). Providing 1.5 HP Submersible Pump set (Make-Kirlosakar/KSB). Providing Electric Panel for 1.5 HP Motor single phase (Make- Kirlosakar/BCH). Providing 35 Mtr. Cable for Submersible Motor of 2.5 Sq mm (Make- Finolex/Texmo). Providing 35 Mtr. Plastic rope for motor. Providing nipple, valve, clamp-04” of 1.5 feet, elbow, well cover etc as required. Making cement concrete/brick chamber of suitable size at boring. Providing shed for protection of panel from rain or water and sunlight as required. |
