Military Engineer Services-MES has published Tender For Provision Of Arboriculture For Otm Accommodation And Special Repair Of Bldg No T2 At Ilp And Cook House Bldg No Ch30 At Age B/R Age (P) And Age E/M. Submission Date for this Tender is 22-08-2023. Building Work Tenders in Siliguri West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 2 | Surface excavation not exceeding 30cm in depth andaveraging 15 cm deep getting out in hard/dense soil. |
| 3 | Excavating post holes in hard/dense soil, each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer n exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface in hard/dense soil. |
| 4 | Excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr deep and getting out in hard dense soil for foundation etc. |
| 5 | Removing excavated material exc 250 m but not exc 500 mtr and deposting where directed at a level n exc 1.5 m above the starting point in hard dense soil after separating good soil for reuse. |
| 6 | Supply and stacking of good earth at site incld royality and carriage upto the working site(good earth measured in stacks will be reduced by 20% for payment.) |
| 7 | Supply and stacking of vermi compostmanure at site incld royality and carriage upto the working site ( Cow dung measured in stacks will be reduced by 8% for payment) |
| 8 | Supply & Planting shrubs of approve quality and variety such as golden duranda /clerodentron/neitum/tecouma in the location as directed incl preparing surfaces and mixing the manure complete all as specifid and directed. |
| 9 | Grassing with Maxican Grass with selexon no grass 1 incld preparation of the ground surfaces incl the spreading, leveling,watering the earth required for planting the grass incl mixing of the vermi compost. (Note: Vermi compost and earth will be measured and paid separately) |
| 10 | Taking up or down 15 mm boresteel water tubingand connections including clfor refixing or removal to store |
| 11 | Taking up or down 20 mm boresteel water tubingand connections including cleaning or refixing or removal to store |
| 12 | S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 13 | S & F GI tubes in 20 mm medium grade with fitting laid in trenches complete all as specified and directed. |
| 14 | S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed complete all as specified and directed. |
| 15 | Supply & Planting of Lemon Tree (Ht 3 to 4 feet) incl preparing pit of size with aproved earth and vermi compost and providing bamboo stick support according to height of tree complete all as specified and directed. |
| 16 | Supply & Planting of Bottle Palm Tree (Ht 3 to 4 feet) incl preparing pit of size with aproved earth and vermi compost and providing bamboo stick support according to height of tree complete all as specified and directed. |
| 17 | Supply & Planting of Christmas Tree (Ht 3 to 4 feet) incl preparing pit of size with aproved earth and vermi compost and providing bamboo stick support according to height of tree complete all as specified and directed. |
| 18 | Supply & Planting of Ashoka Tree (Ht 3 to 4 feet) incl preparing pit of size with aproved earth and vermi compost and providing bamboo stick support according to height of tree complete all as specified and directed. |
| 19 | Supply & Planting of Pancies Plant with one feet dia pot incl preparing pit of size with aproved earth and vermi compost and providing bamboo stick support according to height of tree complete all as specified and directed |
| 20 | Supply & Planting of Ornamental Peer Tree (Ht 3-4 feet)with one feet dia pot incl preparing pit of size with aproved earth and vermi compost and providing bamboo stick support according to height of tree complete all as specified and directed. |
| 21 | Supply only fertilizer i.e urea and DAP as approved by GE. |
| 22 | Supply and planting shrubs of approved quality and variety such as Golden Duranda/ Clerodentron in the location as directed including preparing surfaces and mixing the manure complete all as specified and as directed. |
| 23 | Regular maintenance of edges / shrubs/ plants/trees/grass, by watering deeweding loosening soil adding manure , running and spraying approved insecticide, fungicides etc complete to up keep healthy growthby deputing gardner (mali) well trained in the field 01 nos per day for 8 hrs duty all as directed. |
| 24 | S & tree guards of 0.60mdia and 1.50m height made out of vertical angle (04 Nos) horizontal flat iron along dia internally and externally (03 Nos), expanded metal wit MS Wire 0.9mm dia and n.exec 4 Kg/Sqm including painting and excavation in post holes complete all as specified and as directed. |
| 25 | Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed |
| 26 | S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete, all as specified and directed. |
| 27 | S & F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 28 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed. |
| 29 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) not exc 1.50 Sqm each including iron mongeries complete all as specified and directed. |
| 30 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed. |
| 31 | S& F for 30mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats. |
| 32 | S&F2nd class HW 30mm thick Glazed and skeleton shutters,divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats. |
| 33 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 34 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples |
| 35 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 36 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish) |
| 37 | Supply only sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 38 | Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed. |
| 39 | Supply and fix MS butt hinges medium weight, cold rolled 75mm size complete all as specified and directed. |
| 40 | Supply & fix Aluminium anodisedbarrel tower bolt 100 mm long of extruded section etc complete all as specified and directed. |
| 41 | Supply & fix Aluminium anodisedbarrel tower bolt 150 mm long of extruded section etc complete all as specified and directed. |
| 42 | Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed. |
| 43 | Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 100mm long complete all as specified and directed. |
| 44 | Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy andfixed etc complete all as specified and directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 46 | M&L for 25mm thick PCC type B-2, 1:2:4 (using 40mm graded stone agg) as in sub base, floors and pavings complete all as specified and directed. |
| 47 | M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:6 for laying floor tiles etc all as specified. |
| 48 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note: colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by GE/Engr-in-charge). |
| 49 | Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed. |
| 50 | Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to walls surface etc complete all as specified and directed. |
| 51 | Supply and fixed 4 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. |
| 52 | Material & labour for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area not exc. 3 sqcm complete all as specified and directed |
| 53 | Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq cmin section , in any position all as specified and directed. |
| 54 | M& L for cleansawn Second class hard-wood scantlings with framed work. |
| 55 | Material and labour fornewplywood and wood based materialsurfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 56 | Material and labour for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 57 | Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 58 | Material and labour for preparation of old surface of wood and wood based materials over 10 Cm width or girth and applying one coat of synthetic enamel paint as directed and specified. |
| 59 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levelr all as specified and directed. |
| 60 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 61 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 62 | Material and labour for providing cement concrete 1:3:6 type C-2 using 40mm graded aggregate ) in plinth walls or retaining walls,drain walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) |
| 63 | M&L for Cement concrete type B-2, 1:2:4 (using 40mm graded agg) as in surface channels and drains complete all as specified and directed. |
| 64 | M&L for 75mm thick PCC type C-2, 1:3:6 (using 40mm graded stone agg) as in plinth protection complete all as specified and directed. |
| 65 | M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protectionsurfacefinished even and smooth using with extra cement |
| 66 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc |
| 67 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 complete all as specified. |
| 68 | M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement |
| 69 | M&L for preparingplastered or unplasterd newly surface of any description with three coat of white wash on walls surfaces. |
| 70 | M&L for preparingplastered or unplasterd old surface of any description with two coat of white wash on walls surfaces. |
| 71 | M&L for hardcore of gauge n exc 63mm deposited, spread and levelled in layers n exc 15 cm thickwatered and rammed to a true surface (Broken stone or boulders) complete all as specified and directed. |
| 72 | M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed. |
| 73 | M&L for Providing,PCC 1:2:4 type B-1 ( 20mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed |
| 74 | M&L for machine cut kota stone slab flooring 20-25 thk over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 75 | M & L for 450 x 350 x 6 to7 mm thick glazed coloured ceramic tiles on vertical surface of wallset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany). |
| 76 | Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 77 | Mild steelTMT bars 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 78 | M&L for form work to chullah hoods,chajjas,troughs and similar items including edges with fair finish flat surfaces |
| 79 | M&L for reinforced cement concrete 1;2;4 type B1 (using 20 mm graded stone aggregate) for slabs supported on walls , beams and columns, in floors , roofs, landings and in shelves ,chhajja"s and the like complete with all necessary formwork etc all as specified and as directed. |
| 80 | Demolition of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc |
| 81 | M&L for 18 to 20 mm thick marble work (table rubbed and polished) in steps and cooking platform and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade |
| 82 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar |
| 83 | M&L for precast cement concrete1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabsin not exc10cmthick (with plain or interlocking joints as directed ) complete set in CM 1:4 |
| 84 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store. |
| 85 | S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 86 | S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified |
| 87 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 88 | S&Fvitreous china wash hand basin white flat back of size 550mmx400 mmincluding cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia |
| 89 | S&F stainless made of stainless steel 1.00 mm thickkitchen sink with plug washers, wastes;including bedding in cement mortor on dwarf wall or including fixing cantilever brackets andconnecting union to pipe overall size 495 x 420 mm with bowl size 410 x 330 x 160mm, complete. |
| 90 | Material and labour for prelaminated particle board 18/19 mm thick, exterior grade prelaminatedone side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame workas in shutters for kitchen shelves/cupboards fixed in repairs. |
| 91 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 92 | S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors |
| 93 | S&F soap dish,any type,fixed to plugs with chromium plated brass screws. |
| 94 | S&F CP towel rail,fixed with to plugs with chromium plated brass screws. |
| 95 | S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred"Hot ot Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 96 | S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 97 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 98 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 99 | Taking downsub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. |
| 100 | Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (HRFR)/(FRLS), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 101 | All as per item No. 100 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 102 | All as per item No. 100 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specifieddirected. |
| 103 | All as per item No. 100 here in before but for one 5 pin socket outlet 15 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 104 | All as per item No. 100 here in before but for one 5 pin socket outlet 15 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 4 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 105 | S&FSocket outlet 2 in 1, 3 pin, 5amp flush type |
| 106 | S&FSocket outlet 2 in 1, 3 pin, 5 and 15 amp flush type |
| 107 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 108 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm ,two to three terminals complete all as specified & directed. |
| 109 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 110 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden boardcompleteall as specified and directed. |
| 111 | S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha0.85 (min). Make- Havells/Crompton/Syska |
| 112 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. |
| 113 | S&F of new generation energy saving and environmental friendly long life LED building securitylight made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed. |
| 114 | S & F in replacement of GI brackets for fixing LED building security light fitting fabricated out of GI tubing 32 mm dia, light grade,0.9 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 30 x 4 mm -02 Nos complete for fixing on wallincluding all fixing arrangements such as fastners, bilts, nuts, bolts washers etcincluding making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 115 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 116 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbarsingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 117 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 Vcomplete all as specified and directed. |
| 118 | S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand |
| 119 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 Vcomplete all as specified and directed. |
| 120 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by EIC. |
| 121 | S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of following sizes. |
| 122 | S&F 1100 volts grade heavy dutyflat twin core cable PVC insulated with stranded aluminium conductor of size 16 sqmm and overall PVC sheathedin service connectionsincl dismentling taking down unserviceable one all as specified and directed. |
| 123 | S&F Regal Batten for LED Tube, universal batten for G 13,T8 lamps complete with all accssories internally pre wired and incl connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable including Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelight with 10% THD with very high efficiency suitable for intalltion in T8 Tubelinght with G 13 lamp holders to give glare free light with integrated electronic driver and mounting casing box 2 Nos including taking down unserviceable one complete all as specified and directed. Make: Crompton Greaves Cat Part No IGP161LT-8-16 <T8-20 or equivalent in Phillips/Bajaj/Havells |
| 124 | S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10Wincluding connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable one complete all as specified and directed.Make : Crompton Greaves - Cat Part No LBHP-10-CDL or equivalent in Philips / Bajaj / Havells |
| 125 | S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed . Make - CG/Havells/Philips/Bajaj |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
