Procurement Of Molygraph Make Special Purpose Lubricant For Boiler Of 1X500mw Unit Sgtps Mppgcl Birsinghpur , Moly Graph Itc Bond ( 500 Ml ) Material: Moly Disulphide ( Mos2 ) , Operating Temp:-185°C To 500°C, Density @27°C:0.97±0.02 Gms / Cc, Coating Thickness:8 Micron, Propellent: Non Cfc Bin: 71304763006-01 , Moly Graph Crg-100 Appearance :Smooth Textured, Base Oil Viscosity@40°C:460Cst Flash Point ( Min ) :270°C, Worked Penetration:420-450 Mm, Oxidation Stability, Loss In 100 Hrs.:5 Psig Max, Copper Strip Corrosion:1A, Operating Temp:0 To 140° C Bin: 71304761473-03 , Moly Graph Kopal-1000 Appearance: Smooth Paste, Base Oil: Synthetic, Spec. Gravity:1.23Gms / Cc, Nlgi Grade:2 / 1, Worked Penetration:290-310 Mm Surface Area Coverage 40 M² / Kg, Water Washout@ 80°C, Wt. Loss:?5%, Four Ball Weld Load:4000 N, Coefficient Of Friction:0.06-0.07, Copper Strip Corrosion Test1a Rating, Solid Lubricant: Copper / Graphite, Operating Temp Range: For Base Oil#-40 To180°C & For Solid Lubricants # -40 To 1100 °C Bin: 71324570574-03 , Moly Graph Easylube ( 500 Ml ) Density@27°C:0.83±0.02 Gms / Cc, Film Type Thin Oily, Avg Film Thickness:2-4?, Salt Sprat Corrosion Test ( Passes ) :›=, Propellant: Non Cfc100 Bin: 71324570552-04 , Moly Graph Lsg 44 ( M ) Appearance: Soft, Smooth, Base ( Thickener ) :Lithium, Base Oil:Special Silicon, Nlgi Grade#2, Worked Penetration:265-295 Mm Dropping Point:215°C, Oil Separation?3%, Operating Temp:-73 To180°C Bin: 71304763005-01 , Moly Graph Sg 1000 Appearance: Smooth, Base ( Thickener ) :Lithium-Calcium, Base Oil: Mineral, Base Oil Viscosity@40 °C:900-1100 Cst, Nlgi Grade#2, Worked Penetration After 60 / 60 Strokes:265-295 Mm, Aftere100000 Strokes?5% Change, Dropping Point:180°C, Water Washout@ 80°C, Wt Loss: ?=2%, Four Ball Weld Load:5000 N, Four Ball Wear Scar:0.4 Mm, Copper Strip Corrosion Test:1A Rating, Operating Temp:-30 To 150 °C Bin:71324260069-03
