|
| 1 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. |
| 2 | M&L for 15mm thick cement plaster with CM (1:6) on other than fare face of brick wall finsh even and smooth without using extra cement complete all as directed. |
| 3 | M&L for 20mm thick (in two layer) plastering on fair face of Brick surface with CM (1:4) mixed with WPC finish surface even and smooth with out using extra cement complete all as specified and directed. |
| 4 | Supply only Intregal water proofing compound. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 6 | M&L for coloured, glazed ceramic tiles size 450x300x 6-7mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid completed all as specified and directed. |
| 7 | M&L for 10mm thick rendering of brick wall and concrete surfacesin CM (1:4) surface finished even and fair complete all as specified and directed. |
| 8 | M&L for non skid, joint free, coloured ceramic tiles 6-7mm thick (Square/Rectunglar),Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. as in floor etc set and jointed and pointed in white or coloured cement to match the coloured joint free tiles. complete all as specified and directed. |
| 9 | M&L15mm thick cement slurrybedding layer on floor finishes in CM 1:4 complete all as spd and directed. |
| 10 | M & L for non skid (coloured) ceramic tiles, 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floor etc, of superior quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. Note: Screed bed shall be measured and paid separately |
| 11 | M&L for brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thickwallingbuiltin cement mortar 1:4complete all as specified and directed. |
| 12 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 13 | S & Fin repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg. |
| 14 | Demolation of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed |
| 15 | M&L for RCC(Nominal Mix) in type-B1 1:2:4 (20mm graded aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole covers,drains. |
| 16 | M&L for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed. |
| 17 | S&F20 mm bore (Outer dia) CPVC pipes ofSDR 11and plain CPVC SDR 11 fittingfixed on wall or floor (concealed ), ceiling or laying in floors complete all as directed by Engr-in-Charge . |
| 18 | S&F50 mm bore (Outer dia) UPVC pipes ofSCH-40 and plain UPVC SDR 11 fittingfixed on wall or floor, ceiling or laying in floors complete all as directed by Engr-in-Charge . |
| 19 | S&F20 mm bore brass elbow/Tee/MTa /Fta CPVC complete all as directed by Engr-in-Charge . |
| 20 | S&F in repairs 15mm bore CP angular valve fancy type,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed:- |
| 21 | S & F in repairs 15 mm Dia CP Bib taps,fancy typewith crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed . |
| 22 | S&F in repair vitreous china counter wash hand basin(padestal pattern), white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm diacomplete all as specified and directed. |
| 23 | S&F in repair CP Health faucet with all necessary fittings . Make : Prayag/Cera/Jaquar or equivalent Make : Prayag/Cera/Jaquar or equivalent. |
| 24 | S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 25 | S&Fin repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete complete all as specified. |
| 26 | S&F in repairsfor Powder coated aluminiumsliding windows for two track with powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size64mmX25 mmX1.55mm andshutter of section 20mm X 20mm X1.55mm including (fixing of 4.8 mm thick glass) and taking down old steel windows with necessary all fittings complete all as per manufacturer\"s instructions and all as specified and as directed by the Engr-in-Charge. |
| 27 | Supply PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe (Long bend) 32mm dia of make as approved by GE complete all as specified & directed. |
| 28 | M&L for Granite(of any type)18-20 mm thick for Kitchen slab,window cill,steps,vertical portionmachine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including moulding & polishing fixedcomplete all as spdand directed EIC. |
| 29 | M&L for Two coat of synthetic enamelled paint on old decorated wooden surface exc 10cm width or girth including preparation complete all as specified and as directed upto 8 storey bldg. |
| 30 | M&Lfor complete removal of existing treatment of old decorated wall surfaces and applying two coats of acrylic oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge |
| 31 | M&L for preparation of plastered and unplastered surfaces of New decorated walls take a twocoat of acrylic oil emulsion distemper over 1 mm thick wall care putty complete all as specified and directed. |
| 32 | M&Lfor complete removal of existing treatment of old decorated Ceiling surfaces and applying two coats of acrylic oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge |
| 33 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade as per IS:1868 with anodic coating of grade AC 15 ) of approved design / pattern, with approved standard section and fixing to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles complete all as per requiremint and direction of Engineer in charge (only weight of grill to be measured for payment) |
| 34 | Supplying, installing, Fixing, testing and commissioning of 250-300 mm dia exhaust fan of PVC body with louvers. Including all accessories as required in wash room, single phase, rpm-1200, Noise level (40-45 Db), Air delivery 800m3/hr or more complete all as per requiremint and direction of Engineer in charge . |
| 35 | Providing & fixing aluminium 10-15 micron powder coated louvered with Series-B 18mm x 40 mm x 1mm thick aluminium pipe frame work with 8\"x 8\" cut-out for exhaust-fan provision actuating bar with glass holder, locking handle 4mmfrosted glass etc complete. Exhaust-fan to be |considered centrally located at top of ventilator (8\" x 8\" cut-off).Balance ventilator portion, on right& left side of exhaust-fan, must have fixed glass of same quality. |
| 36 | M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes |
| 37 | Use and waste of formwork to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete in all respect as spd by the Engr-in-Charge. |
| 38 | S&F in repairs 15 mm bore CP pillar taps,with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure ,complete all as specified and directed. |
| 39 | M & L for Cub-boards shutters made with 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work complete all as specified and directed. |
| 40 | S & F Plywood for moduler kitchen, grade BWR, type BB, fixed with screws to timber frame work 12 mm thickincl all necessary fittings complete in all respect as specified. |
| 41 | S & F Decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete in all respect as specified. |
| 42 | S & F Brass Locks with two levers , drawer, grade I, size 50 mmincl all necessary fittings complete in all respect as specified. |
| 43 | S & F Bras Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm longincl all necessary fittingscomplete in all respect as specified. |
| 44 | S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixedcomplete in all respect as specified. |
| 45 | S & F 75 mm Butt hinges stainless steel, and fixedincl all necessary fittingscomplete in all respect as specified. |
| 46 | M&L forMachine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including over 20 mm thick screed bed in CM (1:6) all as specified and directed. |
| 47 | M&L for 25mm thick PCC 1:2:4 type \"B-0\" using 12.5 mm graded crushed stone aggregate as in sub basecomplete all as specified and directed. |
| 48 | S&F in repairsinks with drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm all as specified and directed. |
| 49 | Complete removal of existing treatmentby using electric sander machine or steel wire brushing to remove all dust and loose scale etc of wall surfaces & prepare to receive wall care putty complete all as specified & directed |
| 50 | M&L for 1mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified & as directed. |
| 51 | M&L forpreparation old decorated walls & applying two coats of acrylic oil emulsion distemper complete all as specified and directed. |
| 52 | M&L for preparation of old plastered ceiling surface & applying one coat of white wash complete all as specified and directed. |
| 53 | M&L for preparation of newly plastered wall surface two coats of oil bounddistemper over a coat of primer on complete all as specified and directed. |
| 54 | Excavating in post holes (or similar holes) each n exc 0.50cu.m gettingout returning filling in and ramming earth orbroken rubble mixed with earth around in layers not exceeding 25 cm in hard dense soil complete all as specified. |
| 55 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out soft/loose Soil |
| 56 | M&L for PCC ( 1:5:10 ) Type D -2 using 40 mm graded stone aggregate as in foundation complete all as specified. |
| 57 | M&L for 50 mm thick cement concrete type B1,1:2:4(20mm graded aggregate) as in floors finish even and smooth etc complete all as specified. |
| 58 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 59 | Removing excavated material in exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified. |
| 60 | M&L for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surfaceetc finish even and smoothwithout using extra cement complete all as directed. |
| 61 | M&L for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and directed. |
| 62 | M&L for 100 mm thick PCC (1:4:8) type D-2(40 mm graded stone agg) as in flooring, finished even and smooth with using extra cementcomplete all as specified and directed. |
| 63 | M&L for 25 mm thick sand cushion underpaver block or interlocking tiles floor including watering and consolidation complete all as specified and as directed |
| 64 | M&L for 80 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-40 Grade with grey cement and no pigment complete all as specified and as directed. |
| 65 | M&L for pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400 x 400 x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 66 | M&L for hardcore of broken stone aggregate gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed. |
| 67 | S&F for Steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss,purlins, rafter etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed. |
| 68 | S & F 11-15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed by the Engineer-in-Charge |
| 69 | S&F for Pre painted galvalume aluminium zinc coating GI based corugated steel sheet 0.50mm thick Hi-Rib colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 70 | Supply & Fixingfor Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, ficed with self tapping screws as specified as in ridges. |
| 71 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge. |
| 72 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed |
| 73 | M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surfacecomplete all as specified and as directed. |
| 74 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed andpointed in neat cement slurry in floors over 15mm thick screed bed with CM (1:6) complete all as specified and as directed by the Engr-in-Charge. |
| 75 | M&L for Rendering 10mm thick in CM (1:6) onfair face of brick work or concrete surfacesand finished the surface even and smooth without using extra cementto match the existing surface all complete in all respect as specified. |
| 76 | Sub main wiring with two single core PVC insulated unsheated FRLS flexible copper conducted cable of size 4.0 Sqmm and one single core PVC indulated unsheathed FRLS flexible copper conductor cable of size 4.00 sqmm as earth lead in and including suitable size of PVC couduit with accessories fixed on surface on walls/ceiling by means of PVC sleeves, dash fastners etc making good distrubed surface complete all as specified and directed. (Note : Two runs of 4.0 Sqmm cable, one run of 4.00 sqmm earth wire and PVC conduit all one RM lenght each shall be measured as one unit of one RM). |
| 77 | Supply and fix sheet metal enclosure single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one MCB SP 20 Amps, C type, 240 Volts complete all as specified and directed. |
| 78 | Supply and installation, commissioning of air cooledTower unit air conditioner electric driven filled with eco friendly rafrigrent , single phase of capacity 2TR, complete with all accessories.make-Voltas/Blue star/Daikin |
| 79 | Supply and install hi wall split air conditioner filled with eco friendly rafrigrent comprising of indoor and outdoor units complete with cordless remote control unit and in-built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating of capacity 1.5 TR including electrical connection and heat insulated copper refrigerant tubing from outdoor to indoor unit all as specified and as directed.Voltas/Blue star/Daikin |
| 80 | Material and labour for framed brackets of angles or tees for fixing of outdoor unit of Split air conditioner including drilling, rivetting, welding as necessary and painting with one coat of red oxide primer and two coats of synthetic enamel paint all as specified and as directed. |
| 81 | Supply and fix room window type air conditioner electric driven (single phase),filled with eco friendly rafrigrentcooling capacity 4500 K Cal per hour 1.5 TR Capacity all as specified by Engr-in- charge |
| 82 | Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified. |
| 83 | For opening size 64\"x84\" |
| 84 | For opening size 70\"x78\" |
