|
| 1 | Taking down wooden chowkat with shutters of any description without taking off shutters from frame area nexc 1.50 Sqm complete all as specified and as directed. |
| 2 | Taking down wooden chowkat with shutters of any description without taking off shutters from frame area exc 1.50 Sqm but not exc 4.00 sqm complete all as specified and as directed. |
| 3 | Taking down shutter of any description nexc 1.00 Sqm each complete all as specified and as directed. |
| 4 | Taking down shutter of any description exc 1.00 Sqm but nexc 2.0 Sqm each complete all as specified and as directed. |
| 5 | S&F single leaf glass door shutter 12mm thick toughened glass of selected quality with anodised aluminum top rail of size 100x44x2mm and bottom rail of size 150x44x2.5mm fixed with round plug and screws with necessary glazing clips, rubber packing, beading screws with necessary fillings up gaps at top and bottom along with including 01xdouble action floor spring hydraulically regulated with stainless steel cover, 02 Nos of stainless steel handles with size exc 30cm but nexc 45cm complete all as specified and as directed. |
| 6 | S&F aluminium door shutter made with aluminium section of size 100 x 44 x 2 mm thick, vertical styles of shutters made with sections 65 x 44 x 2 mm thick, and top/middle/bottom rail of shutter with section 84 x 44 x 2 mm thick, including 5 mm thick tinted glass panes in upper portion and 4mm thick aluminium composite panel in lower portion in sets including necessary fixing arrangement, joining cleats, glazing clips, rubber packing aluminium anodised beading screws etc, 100mm size hinges, tower bolt 200 mm size, mortice lock 100 mm size 4 lever, 200mm size handles etc, fitted to shutters complete all as specified and as directed. |
| 7 | S&F aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 Nos.) hinge type B-21 of 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and as directed. |
| 8 | S&F aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including jointing cleats, hold fasts for fixing on walls/floors of any description and in any position complete all a specified and as directed. |
| 9 | M&L for fixing ACP in repairs (aluminium composite panel) 4.0 mm thickness to existing Aluminium frame in any colour (as approved by Engr-in-Charge) complete all as specified and as directed. |
| 10 | S&F in repair 12 mm thick toughened glass of selected quality fixed to existing frame works complete all a specified and as directed. |
| 11 | S&F in repair 5.5mm thick plain glass, ordinary quality and glazing with oil putty/aluminium glazing clips in squares n.exc 0.5 Sqm in each pane complete all a specified and as directed |
| 12 | All as per item No. 11 above but exc 0.5Sqm in each pane 5.5 mm thick sheet glass complete all a specified and as directed |
| 13 | S&F in repairs bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers only including fancy type beading with frame complete all a specified and as directed. |
| 14 | S&F in repairs stainless steel grade 303, the welded joints of the SS pipes/rectangular size and with existing MS Balusters should be finished smooth by mechanical grinding and rubbing etc as directed.Note:- The rate is deemed to be included for the dismantling of the existing wooden hand rails and making good the disturbed surface matching with the existing adjoining surface complete all as specified and directed. |
| 15 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire stapled in wooden door/windows complete all as specified and as directed. |
| 16 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire stapled in wooden door/windows complete all as specified and as directed. |
| 17 | S&F aluminium grill with mesh 75mm and aluminium bar 6mm XPM type including all accessories such as channels for fixing grill screws etc aluminium section 15 micron thick anodizing along with stainless steel wire cloth, complete all as specified and as directed. |
| 18 | S&F in repair aluminium (extruded section) door closer hydraulically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete all a specified and as directed. |
| 19 | S&F in repairs and fixed Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty floor spring for aluminum/glass door shutter of required size and making good to surface complete all as specified and directed. |
| 20 | Taking down of aluminum/Glass doors carefully and re-fixing in same opening after necessary repairing/ cleaning/ greasing and overhauling of the complete door assembly and make the same fully functional all as specified and directed. |
| 21 | Minor repair to aluminum/glass doors, windows, partitions and making good the same (i.e. Handles, hinges, rubber beadings, clips etc) complete all as specified and directed. |
| 22 | S&F in repair\"s Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed. |
| 23 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. |
| 24 | S & F stainless steel butt hinges 100mm size medium weight, complete all as specified and as directed. |
| 25 | S&F for 200 mm long anodised aluminiumbarrel tower bolt of extruded section complete all as specified and as directed. |
| 26 | S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 27 | S&F Aluminim anodised barrel tower bolt 150 mm long extruded section complete all as specified and as directed. |
| 28 | S&F Extruded aluminium alloy handle 150 mm long fabricated type anodised complete all as specified and as directed. |
| 29 | S&F aluminium Mortice lock, vertical type, size 75 mm 4 Levels complete all as specified and as directed. |
| 30 | S&F in repairs Brass/Stainless Steel Mortice lock, vertical type, size 75 mm 4 Levels complete all as specified and as directed. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 32 | Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) , complete all as specified and as directed. |
| 33 | M&L for cement concrete type B-0 (1:2:4) using 12.5mm graded aggregate as in flooring 25mm thick as in sub base floor complete all as specified and as directed. |
| 34 | M&L for non skid ceramic coloured tiles 8mmthick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile including screed bed of mortar 15 mm thick in CM (1:6) complete all as specified and as directed. |
| 35 | All as per above item No. 34 but on dado/skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 36 | M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) Dark Shade polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 37 | All as per above item No 36 but on dado/skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 38 | M&L for glazed ceramic coloured tiles (light shade) of size 450x300x7mm thick for work on vertical surface of walls set & jointed neat in cement slurry and pointed in white or coloured cement to match including 10mm thick plaster in CM (1:4) complete all as specified and as directed. |
| 39 | M&L for glazed ceramic coloured tiles (light shade) of size 300x600x7mm/300x900x7mm thick for work on vertical surfaces of walls set & jointed neat in cement slurry and pointed in white or coloured cementto match including10 mm thick plaster in CM (1:4) complete all as specified and as directed. |
| 40 | M&L for coloured rustic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floor/path set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed. |
| 41 | Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed. |
| 42 | M&L for 18 to 20 mm thick granite of any type/colour as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over Cement mortar bedding in CM (1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 43 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore including taking up or down unserviceable steel tubing complete all as specified and as directed. |
| 44 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore including taking up or down unserviceable complete all as specified and as directed. |
| 45 | Cutting chases pinning in where required to ends or edges of landings cills, sunshades, shelves, lintels, parapet walls, concealed tubing or water proofing membrane etc making good to facings where required in CM(1:3) cutting not exc 10 cm girth complete all as specified and directed. |
| 46 | Supply and fixed in repair of PVC low level flushing cistern 10 Ltr capacity ISI mark syphonic action type push buttonincluding flush pipe, ball valve, handle including brackets fixed to walls complete all as specified and directed. |
| 47 | S&F in repairs PVC connection 15 mm size with PTMT nut of length 450 mm complete all as specifiedand directed. |
| 48 | S&F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed. |
| 49 | S& F in repairs bib taps CP brass fancy type with crutch or butterfly handle screwed down screwedfor iron pipe for brass ferrule 15 mm dia complete all as specified and as directed. |
| 50 | S&F in repairs 15 mm dia bore fancy type pillar taps, cast copper alloy chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with capstan head, screwedfor iron pipes or for union and fixed, complete all as specified and as directed. |
| 51 | S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type wall mixer with provision for overhead shower with and 115mm long bend pipe for cold & hot water complete all as specified and as directed. |
| 52 | S&F in repairs 15mm dia Centre hole mixer for WHB with connections cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 53 | S&F in repair chromium plated overhead Shower dia 180 mm Round Shape single flow with and shower arm dia 20 mm & 450mm long round shape with 90 degree for wall mounted shower with flange complete all as specified and as directed. |
| 54 | S&F in repairs floor mounted coupled closet of size 800x365x650 mm, trap distance S-250 mm including dual flush fittings with soft close seat cover complete all as specified and directed. |
| 55 | S & F in repair vitreous china wall hung wash hand basin size 200x550x400mm including full Pedestal brackets, Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and fixed complete all as specified and directed. |
| 56 | S&F in repair chromium plated hand shower (health faucet), telephonic type with 8mm dia, 1 meter long CP flexible tube with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. |
| 57 | S&F in repair toilet paper holder, twin type CP fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed. |
| 58 | S&F in repairs Soap dish holder brass chromium plated fixed with rawl plug complete all as specified and directed. |
| 59 | S&F in repairs for Corner Glass shelf with bracket consisting of 5.5 mm thick sheet glass with chromium plated bracket guard complete all as specified and directed. |
| 60 | S&F in repairs 25 mm dia aluminium drapery rod with natural wooden finish and wooden ornamental attachment at both ends and matching curtains rings min 8 nos in one mtrs, complete all as specified and as directed. |
| 61 | S&F in repairs 25 mm dia Stainless Steel Curtains Rod and Stainless Steel Ornamental attachments at both ends and matching curtains rings min 8 nos in one mtrs, complete all as specified and as directed. |
| 62 | S&F in repair PVC (PTMT alloy) bath room cabinet with mirror completes all as specified and as directed. |
| 63 | S&F in repairs stainless steel Towel Rack of size 640x250mm with lower hanger with hook, fixed to wall with rawl plug complete all as specified & directed. |
| 64 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts including PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 65 | Dismantling of wrought iron or mild steel work including doors, gates but excluding frame truss etc complete all as specified and as directed. |
| 66 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed. |
| 67 | S&F framed work for ornamental and intricate design portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed. |
| 68 | S&F in repairs vitreous china wash down water closet pan (Cascade pattern) coloured, fancy type (including two Nos fixing bolts including PVC seat cover but including flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 69 | Dismantling asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 70 | M&L for 6 mm thick asbestos cement, corrugated or semi corrugated sheet in roofs, wall fixed with L- type or \"J\" or cranked hook bolts etc complete all as specified and as directed. |
| 71 | S&F asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets with \"L\" or \"J\" type or cranked hook bolt complete all as specified and as directed. |
| 72 | S&F in repairs 0.63mm thick corrugated galvanised mild steel sheeting with grade of zinc coating 275 with two corrugation side lap fixed with J hooks or self tapping in roof including dismantling all as specified and directed. |
| 73 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed. |
| 74 | S&F prepainted galvalume aluminium zinc coating GI basedplain steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as inplain sheet as in ridges, gutters , facia bd etcl, fixed with self tapping screws or \"J\" /\"L\"hooksincluding dismantling complete all as specified and as directed. . |
| 75 | Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work completeall as specified and as directed. |
| 76 | Dismantling timber scantling 40 Sqcm and over in section, in any position of unframed work completeall as specified and as directed. |
| 77 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and directed. |
| 78 | S&F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using Fe 410-W (Gde E-250 Quality- A) complete all as specified and directed. |
| 79 | S & F for suspended false ceiling using anodized GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner \"T\" size 24 mm x 24 mm x 0.3 mm thickness and cores Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board) to be placed in grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structural soffit by hanger @ 1220 mm maximum C/C.The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross \"T\" to be inter locked between main runner @ 610 mm C/C so as to form 600 mm x 600 mm grid including taking down of old existing ceilings complete all as specified and directed. |
| 80 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 81 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 82 | Taking down cement plaster including raking out joints hacking for key, scrubbing down with water, complete all as specified and as directed. |
| 83 | M&L for rendering 15mm thick plaster in CM (1:6) on brick or concrete surfaces finished even & fair, complete all as specified and as directed. |
| 84 | M&L for two coats of oil bound distemper over a coat of primer on newly plastered surfaces using roller only as per manufacturers instruction over and applying 3mm thick wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and as directed. |
| 85 | M&L for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 86 | M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed. |
| 87 | Demolition of cement concrete reinforced cut as required to facilitate demolition complete all as specified and as directed. |
| 88 | M & L for RCC 1:2:4 type B1 (Using 20mm Graded Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 89 | M&L for TMT Steel Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 90 | M&L for Form Work to soffits of suspended slab such as roof slab and similar work nexc 200 mm thick (Horizontal or Slopping) fair finished flat surface complete all as specified and directed. |
| 91 | M&L for Form Work to edges of concrete flats, treads, break in floor & roofs n.exc 20 cm wide horizontal or slopping and similar works fair finished flat surface complete all as specified and directed. |
| 92 | Schedule of Credit |
