Tender For Addition / Alteration And Up Gradation And Connected Wks Of Offers, Jcos And Ors Married Accommodation At Ambala Cantt., Ambala-Haryana

TDR : 38897145

Tender Notice
Corrigendum Details
BOQ

Expired

Ambala , Haryana

Tender Brief : Corrigendum : Tender For Addition / Alteration And Up Gradation And Connected Wks Of Offers, Jcos And Ors Married Accommodation At Ambala Cantt.

Document Fees
₹ 3000 /-

EMD
₹ 783000.0 /-

Tender Value
₹ 9.16 Crore /-

Submission Date
04-11-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	30-10-2023	CORRIGENDUM NO 6	Other	04-11-2023
2	21-10-2023	CORRIGENDUM_5 AMENDMENTS TO TENDER AND BOQ	BOQ	04-11-2023
3	21-10-2023	CORRIGENDUM_5A AMENDMENTS OF DATE	Date	04-11-2023
4	13-10-2023	CORRIGENDUM_4_BID SUBMISSION START DATE	Date	28-10-2023
5	30-09-2023	DATE CORRIGENDUM 3	Date	23-10-2023
6	15-09-2023	DATE CORRIGENDUM 2	Date	09-10-2023
7	16-08-2023	DATE CORRIGENDUM	Date	23-09-2023

Name of Work: ADDITION / ALTERATION AND UPGRADATION AND CONNECTED WKS OFOFFRS,JCOS AND ORS MARRIED ACCN AT AMBALA CANTT

Sl. No.	Item Description
1	ITEM NO. 1 : Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings etc. or cutting out defective brick work for under- pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc and rubbish not exc. 50 m from site complete all as specified and directed by Engineer-in-Charge.
2	ITEM NO. 2 : Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
3	ITEM NO.3 : Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) asin roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.
4	ITEM NO.4 : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
5	ITEM NO.5 : Demolition of Cement concreteunreinforced as in Ground Floor andpaving n. exc. 15cm thick (above or below G.L.) complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.
6	ITEM NO.6 : Demolition of Cement concrete (any type) for existing sunken portion of WC/floor trap including removing of all debris from site to cleanings distance exc 250m but n. exc 500mand deposited where directed including clearing of surface with wire brushes and water complete all asspecified and directed by Engineer-in-Charge.
7	ITEM NO.7 : Taking down chowkhats or frames n.exc 1.5 sqm each (without taking off shutter from the frame)and removing from the site including dismantling brick work for hold fasts complete, all as specified and directed by Engineer-in-Charge.
8	ITEM NO.8 : Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each(without taking off shutter from the frame)and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed by Engineer-in-Charge.
9	ITEM NO.9 : Taking down shutters of any description n exc 1 Sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge.
10	ITEM NO.10 : Taking down shutters of any descriptionexc 1 Sqm and not exc 2 Sqm each and removing from the site complete, all as specified and directed by Engineer-in-Charge.
11	ITEM NO.11 : Dismanting of stucturel steelwork including doors, gates but excluding framed truss etc complete all as specified and directed by Engineer-in-Charge.
12	ITEM NO.12 : Dismantling woodenboarding any description, fixed in any position with nails as in shelves of cup board and pelmets of any description complete all as specified and directed by Engineer-in-Charge.
13	ITEM NO.13 : Running welding in repairs to hinges of steel window/pressed steel door and making good for opening of doors/window shutters thickness of metal to be welded exc 6 mm but n.exc 9 mm complete all as specified and directed by Engineer-in-Charge.
14	ITEM NO.14 : Taking down of Eaves gutter/rain water pipe( AC rain water pipe /SWG pipe line of any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engineer-in-Charge.
15	ITEM NO.15 : Demolition and breaking up 150 mm bore drain pipes (salt glazed stone ware pipes) set in cement mortar complete all as specified and directed by Engineer-in-Charge.
16	ITEM NO.16 : Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.
17	ITEM NO.17 : Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.
18	ITEM NO.18 : Dismantling of cast iron or RCC drain pipes 100 mm bore jointed in cement mortar from floors/walls etc. and taking out from trenches if required complete all as specified and directed by Engineer-in-Charge.
19	ITEM NO.19 : Dismantling of cast iron or RCC drain pipes 75 mm bore jointed in cement mortar from floors/walls etc. and taking out from trenches if required complete all as specified and directed by Engineer-in-Charge.
20	ITEM NO.20 : Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed Conduit(TV/Tele Socket) etc., and making good, cutting not exc 10cm girth and complete, all as specified and directed by Engineer-in-Charge.
21	ITEM NO.21 : Disconnecting existing tanks of capacity 500 litre setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(cleaning repairing etc measured separately) complete all as specified and directed by Engineer-in-Charge.
22	ITEM NO.22 : Demolition of brick work built in cement mortar including all quions arches, pillar or any other description etc complete all as specified and directed by Engineer-in-Charge.
23	ITEM NO.23 Demolition of cement concrete (reinforced) of any description and in any position including cutting of reinforcementcomplete all as specified and directed by Engineer in Charge.
24	ITEM NO.24 : Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and directed by Engineer-in-Charge.
25	ITEM NO.25 : Demolition of mudroof any thickness (whether full thickness removed or part thereof ) including plastering & leaping complete, all as specified and directed by Engineer-in-Charge.
26	ITEM NO.26 :Dismantlling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in any position complete all as specified and directed by Engineer in Charge.
27	ITEM NO.27 : Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colourcylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight200 gm - 210 gms )including dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 250 ltrs & n.exc 500 Ltrs complete all as specified and directed by Engineer-in-Charge.Note :(i) Inlet, outlet & wash out pipe will be measured paid for separately. (ii) The quoted rate is inclusive ofminimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.
28	ITEM NO.28 : Broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete & all as specified.
29	ITEM NO.29 : 25 mm thick Cement concrete (1:2:4) type B-0,using 12.5 mmgraded mechanically crushed stone aggregateas in sub - floors, sub bases finished even & rough to receive the topping layer. complete all as specified and directed by Engineer-in-Charge.
30	ITEMNO. 30 : 100 mm thick, cement concrete1:4:8 type D2using 40 mm graded mechanically crushed stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified
31	ITEMNO. 31 :75 mm thick, cement concrete type C-2, 1:3:6 using 40 mm graded mechanically crushed stone aggregate, finished even & smooth without using extra cement, as in plinth protection / path complete all as specified and directed by Engineer In Charge.
32	ITEM NO. 32 : Cement concrete75 mm thick 1 :2 4 type B 2 using 40 mm graded mechanically crushedcrushedstone aggregate as in flooring,finishing cement concrete surface even andfair with outusing extra cement, to be laid in alternate panels as directed complete andall as specified
33	ITEM NO. 33 :40 mm thick cement concrete1:2:4 type B 1 (20 mm graded mechanically crushed stone aggregate) as in PCC flooring finishing concrete surface even and smooth without using extra cement complete all as specified and directed.
34	ITEM NO.34 : Plain cement concrete (1:3:6) type C-1,using 20 mm graded mechanically crushed stone aggregate as in filling of pressed steel frame /hold fast blocks etc and similarcomplete all as specified and directed by Engineer-in-Charge.
35	ITEM NO.35 : Plain cement concrete (1:4:8) type D-2,using 40 mm gradedmechnically crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
36	ITEM NO.36 : Reinforced cement concrete pipes. 150mm bore NP3 laid in trenches to any depth with and including jointing materials and testing complete all as specified and directed by Engineer-in-charge Note : Excavation and earth work and concrete forbed and haunching of pipe shall be measured and paid seperatively.
37	ITEM NO. 37: Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified and directed by Engineer in charge.
38	ITEM NO. 38 :Concrete bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified and directed by Engineer in charge.
39	ITEM NO.39 : Plain cement concrete 1:2:4 type B-0 using 12.5mm gradedmechnical crushed stone aggregate as in roof kerbs or mud stops and benching, rounded or chamfered on edges , coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be paid separately.
40	ITEM NO.40 : Plain Cement concrete1:2:4 type B-1using 20mm mechanically graded crushed stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cementincluding weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.
41	ITEM NO.41 : Plain cement concrete1:2:4 type B-1using 20mm graded mechanicallycrushed stone aggregate as, copings, and, benching including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.
42	ITEM NO.42 : Plain cement concrete1:3:6 type C-1 using 20mm gradedmechanically crushed stone aggregate as in surface channel or drain including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.
43	Item No 43 : Plain cement concrete1:2:4 type B-2 using 20mm gradedmechanically crushed stone aggregate as in surface channel or drain including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.
44	ITEM NO.44 : Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. complete all as specified and directed by Engineer-in-Charge.NOTE: Inner girthonly be measured and paid.
45	ITEM NO.45 : Reinforced Cement Concrete M-25 Design mix using 20mm gradedmechanically crushed stone aggregate as in chajjas and the like complete all as specified and directed by Engineer-in-Charge.
46	ITEM NO.46 :Reinforced Cement ConcreteM-25 Design mix using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.
47	ITEM NO.47 : Reinforced Cement Concrete M-25 Design Mix using 20mm graded mechanically crushed stone aggregate as in Beams,cantilevers, bressummers, lintels over 1.5mcomplete all as specified and directed by Engineer-in-Charge..
48	ITEM NO.48 : Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.
49	ITEM NO.49 : Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , slab over manholes similar work; not exceeding 200mm thick (Horizontal or sloping) (fair finished flat surfaces of concrete), complete, all as specified and directed by Engineer-in-Charge.
50	ITEM NO.50 : Use & waste of Formwork to sides andsoffits of flooror roof beam ,beam haunchs & girders, bressummers, lintels cantilevers , shelves including supports,overhangs etc also splays betweenfloor & beams etc forflat rough finished complete all as specified and directed by Engineer-in-Charge.
51	ITEM NO.51 : Use and waste of form work to Chullah hoods, chajjas, troughs and similar items including edges for rough finish surfaces complete all as specified and directed by Engineer-in-Charge.
52	ITEM NO.52 : Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide (fair finished surfaces of concrete), complete, all as specified and directed by Engineer-in-Charge.
53	ITEM NO.53 : TMT steel bars 10mm dia and over, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete, all as specified and directed by Engineer-in-Charge.
54	ITEM NO.54 : TMT steel bars6 to 8 mm dia,of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed by Engineer-in-Charge.
55	ITEM NO.55 : TMT steel bars 5mm dia and over upto and including 10mm dia ,of grade Fe-500D cut to length, bent to shape required, including cranking, bending stirrups spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in strirrups , spacers and binders complete all as specified and directed by Engineer-in-Charge.
56	ITEM NO.56 : First quality, Non skid ceramic, coloured, rectified i.e. straight edge ( locally known asjoint free) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm andthickness7 to 8 mm as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to matchthe shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:4) complete, all as specified and directed by Engineer-in-Charge.
57	ITEM NO.57 : First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) area of each tiles excedding 0.18 sqm but not exceeding 38 sqm and of thickness 7 to 8 mm, in verical surfaces such as skirtings, dados and risers to steps etc (by cutting the tiles to required height). overincluding 10 mm thick cement mortar (1:4) rendering, set and jointed with tile adhesive with notched trowel and pointed in grout of matching shade of tiles, complete all as specified and directed by Engineer-in-Charge.
58	ITEM NO.58 :First quality Non - skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm asin floors etc. set and jointed in neat cement mortarover and including 15 mm thick screed in cement mortar (1:6) and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge.
59	ITEM NO.59 : Glazed ceramic colouredtiles 450mm x 350mm &7mm thick onvertical surface such as skirting , dado etc. over and including 10 mm thick rendering in CM 1:4 thick set and jointed in neat cement mortar and pointed in white or colour cement to match tiles complete all as specified and directed by Engineer-in-Charge.
60	ITEM NO.60 : Vitrifiedcoloured ceramic tiles light shade 10 mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to matchthe shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:4) complete all as specified and directed by Engineer-in-Charge.
61	ITEM NO.61 : Vitrifiedcoloured ceramic tiles light shades 10 mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to matchthe shade selected quality laid over and including 10mm thick rendering layer in CM (1:3) complete, all as specified and directed by Engineer-in-Charge.
62	ITEM NO.62 : Machine cut Kota stone slab flooring 18-22 mm thick, for staircase step (treads)in single piece (of length not more than 1200 mm), laid over over & including 15 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete, includingprovn oftwo Nos 3x3mm grooves at tread of each step complete all as specified and directed by Engineer-in-Charge.
63	ITEM NO.63 : Machine Cut Kota stone slab 18-22 mm thick on vertical surfaces like riser of steps, skirting, in single piece (of length not more than 1200 mm) over & including 10 mm thick (average thickness) cement mortar (1:3) rendering and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Mirror finish), complete all as specified and directed by Engineer-in-Charge.
64	ITEM NO.64 : Machine cut Kota stone slab flooring 20-25 mm thick, laid over & including 20 mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge.
65	ITEM NO.65 : Machine cut Kota stone slab20-25 mm thick as in skirting, dado and pillars etc , laid over & including 10 mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the existing surfaces including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge.
66	ITEM NO.66 : Granite jet black shade, 15-18mm thick, (table rubbed and polished)machine cut, machine polished,bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick(average thickness) cement mortar(1:4) screed, as in cookingplatform,shelves,RCCcounters,windowcills&similarsituations,complete all as specified and directed by Engineer-in-Charge.
67	ITEM NO.67 : Baroda green marble, 15-20 mm thick, (table rubbed and polished) machine cut,laid over & including 15 mm thick (average thickness) cement mortar (1:4) screed and bedded, jointed with grey cement slurry & pointed with grout of matching shade including rubbing and polishing (Granite finish), as in cooking platformshelves , RCC counters, window cills & similar situations complete all as specified and directed by Engineer-in-Charge.NOTE: Full round nosing if ordered on exposed edges shall be paid separately under respectiveitem.
68	ITEM NO.68 : Rounding to edgesof stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations includingcutting, rubbing and polishing (mirror finish), complete all as specified and directed by Engineer-in-Charge.
69	ITEM NO. 69 :Providing and laying of300x300 mm & 10mm thick Anti-Skidvitrified pavement tile in approved colour & Shadein anti skid finishset and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4complete all as specified and directed by Engineer- in - Charge .(Note: Design/pattern shall be as approved by GE at the time of execution)
70	ITEM NO. 70 : Supply only Glass dividing strips, 3mm thick and inserted in position to conform to designwidth of strip 38mm complete all as specified and directed by Engineer In Charge.
71	ITEM NO. 71 :Supply only 4mm thick plain Asbestos cement sheet 75mm wide as in dividing strips in flooring fixed in position to conform to design all as specified and directed by Engineer In Charge.
72	ITEM NO.72 : Brick work with sub class \"B\" bricks, class designation 100, old size bricks, straight or curved on plan exceeding 6.00 metre mean radiusbuilt in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. All as per serial item No. 84 here-in-before but except bricks -ditto- All as per serial item No 72 here-in-before but except bricks-ditto-
73	ITEM NO.73 :All as per serial item No 72 here-in-before but except bricks-ditto-
74	ITEM NO.74 : Brick work with sub class \"B\" bricks, class designation 100, old size bricks, straight or curved on plan exceeding 6.00 metre mean radiusbuilt in cement mortar 1:6complete all as specified and directed by Engineer-in-Charge.
75	ITEM NO.75 : Brick work using burnt clay bricks of sub class \"B\" ,class designation 75,straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4)completeall as specified and directed by Engineer-in-Charge.
76	ITEM NO.76 : Precast PCC plain factory made tiles,ISI marked,22 mm thick of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry andfabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:3) beddingjoints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed by Engineer-in-Charge.
77	ITEM NO.77 :Forming jambs, etc to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work;built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
78	ITEM NO. 78 : Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces , trowelled to even and smooth surface without using extra cement, complete all as specified and directed by Engineer-in-Charge.
79	ITEM NO.79 : Rendering 15 mm thick in cement mortar 1:6,onfair faces of block mosonry or concrete surfaces finished even and smoth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
80	ITEM NO.80 : Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces mixed with liquid water proofing compound, trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.NOTE: Water proofing compound shall be measured and paid separately.
81	ITEM NO.81 : Rendering 15 mm thick incement mortar 1:4 on fair faces of brick work or concrete surface of wall and finfished surface even and smooth with neerufinish to plastering complete all as specified and directed by Engr-in- charge.
82	ITEM NO.82 :Rough cast finish plastering over and including 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state, the rough cast mixture consisting of crushed stone or fine gravel aggregate ( of size between 6 to 12 mm ) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed by Engineer-in-Charge.Rough cast finish plaster shall be applied asspecified in clause 14.22 of SSR Part-I .
83	ITEM NO 83 Supply only liquid water proofing compound ISI Marked complete all as specified and directed.
84	ITEM NO.84 : Rendering 5 mm thick in cement mortar 1:3as in soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth without using extra cement etccomplete all as specified and directed by Engineer-in-Charge.
85	ITEM NO.85 : Dubbing out average 10mm thick on irregular surfacesofsoffits of slabs/Chajja/ Sunshades etc. in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
86	ITEM No 86. Preparation of exposed brick wall surfaceby cleaning the surface B102with wire brushto remove all dirt / loose materials from the bricks and from the joints between the bricks.Prepared surface should be then washed with diluted HCL acid (Dilution ratio of 1:50) three times ina day for two days.After acid wash surface should be allowed to be air dried for one day.Carrying out efflorescence treatment to exposed and prepared wall surfacein the following sequence :–(a) Prime the prepared surface with one of the following product mixed with cement in 1:1ratio as bonding agent :–(i)Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied \"BY HAND\" while the primer is tacky.PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer\"s instructions :–(i) Pidicrete URP of M/S Pidilite (ii)Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(c) PMM surface should be allowed to dry for one day.After that it should be painted with two coats of one of the following compounds mixed with cement only in ratio of one part of selected compound and one point five part of cement :–(i) Pidicrete URP of M/S Pidilite (ii)Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC Contd...
87	(d)Now apply two coats of one of the following compound over the surface.These compounds are to be used as per manufacturer instructions :–(i) Pidifin 2K of M/S Pidilite (ii)Brush Coat of M/s Sika(iii) Brush Bond of M/s FOSROCNote : Both coats should be perpendicular to each other and gap of application between two coats shall be minimum 6 hours.(e) Sprinkle loose coarse sand after second coat while surface is tacky.Note: (i) Item will be executed by authorised applicator of the selected /approved company only. (ii) Every stage of work will be approved by GE, then only next layer will be executed by contractor
88	ITEM NO.87 : Preparation of new plastered or unplasteredsurfaces of wallsrough cast plaster and applyingtwo coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge. (Note:-For Measurment purpose only flat surface shall be measured)
89	ITEM NO.88 : Complete removal of existing treatment from walls and applying two coats of cement base paintover one coat of alkali resistant primerincluding preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
90	ITEM NO.89 : Preparation of new plastered surfaces of wall and applyingtwo coats of oil bound distemper over a coat ofchalk whiting primer complete all as specified and directed by Engineer-in-Charge.
91	ITEM NO.90 : Providing one layer of guiniting of thickness not exceeding 50 mm provided steel reinforcement and chicken wire mesh if required by means of tinned tracks or welded to existing reinforcement in CM 1:3 for top & bottom of roof slabs, beams, columns and staircase etc as directed including scaffolding at any height all as directed including mild steelchicken wire mesh of weight exceeding 0.25 kg/sqm and but not exc. 4kg/sqm complete all as specified and directed by Engineer-in-Charge.
92	ITEM NO.91 : Preparation of old Plastered or un-plastered surfacesof walls cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on walls/ old decorated surfacescomplete all as specified and directed by Engineer-in-Charge.
93	ITEM NO.92 : Preparation of old Plastered or un-plastered surfacesof ceilings etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on ceilings/ old decorated surfacescomplete all as specified and directed by Engineer-in-Charge.
94	ITEM NO.93 : Preparation ofplastered or unplastered new surfaces of ceilingsand applyingthree coats of white wash including preparation of surface complete all as specified and directed by Engineer-in-Charge.
95	ITEM NO.94 : Preparation ofplastered or unplastered new surfaces of wallsand applyingthree coats of white wash including preparation of surface complete all as specified and directed by Engineer-in-Charge.
96	ITEM NO. 95 :Preparation of plastered or unplastered new surfaces and applyingtwo coats of cement base paint complete all as specified and directed.
97	ITEM NO. 96 :Complete removal of existing treatment and applying two coats of oil bound distemper on walls over a coat primer of chalk whiteningincluding preparation of surfacecomplete all as specified and directed.
98	ITEM NO.97 : Factory made Pressed steel frames, confirming to IS, having profile125 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and fixing only 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge.Note:Butt hinges shall be measured and paid separately as supply only under relevant item.
99	ITEM NO.98 : Factory made Pressed steel frames, confirming to IS, having profile105 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and fixing only 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge.Note: Butt hinges shall be measured and paid separately as supply only under relevant item.
100	ITEM NO.99 : Plain, solid, straight 2nd class Hard wood chowkhats and frames, wrought, framed rebated on solid, rounded or chamferred, put together with glue pinned at joints supplied and fixed complete all as specified and directed by Engineer-in-Charge.
101	ITEM NO. 100 : Factory made solidPVC moulded doorshutters 28 to 30mm thick (stiles)with2:4 or 6 raised panel design with 2mm thick , prelam pvc sheet front face 2mm plain colour pvc sheeton back face with particleBoard core supplying & fixing in frame at site as per specification & drawing (Wood colour) complete all as specification and directed.
102	ITEM NO.101 : 35 mm thick factory made glazed & Skeleton shutters of 2nd class HardWood open rebated & prepared to receive glass or gauze etc (without sash bar)open rebated with edge of framing , chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc sizes of members of shutters as specified in sec 8 clause 8.24 (a) of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge.
103	ITEM NO.102 : Solid PVC door frames of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, and edges will be painted to match with printed sheet, supply & fixing in opening as per specification & drawing complete, all as specified and directed by Engineer-in-Charge.
104	ITEM NO.103: Factory madebox type steel windows with pressed steel frame complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with or without glazing barsdovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge.Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4(ii)Mode of measurement Unit will be in Kilogram for the complete window except Glass / wire Gauge but incl fittings, ISI marked iron mongery and Grill/ Guard bar complete as per TD. The weight of windows will be finalized by the BOO to be convened by CWE before installation. The weight shall not include PCC back filling of the chowkhat.(iii) The PCC back filling in chowkhat of window, Sheet glass and wire gauge will be measured and paid separately against respective items.(iv) opening for AC provision is also included in quoted unitrate.
105	ITEM No. 104Factory made box type steel windows with pressed steel frame complete included mild steel ascessories like lugs, door stopper, holdfasts, pintol hinges, handles (minimumOne for each shutter), and ISI marked tower bolt 150 mm size (minimum 2 for each shutter)etc. with or without glazing bars dovetailed or welded with one shop coat of zinc chromate primer , complete all as shown on drawing no. TD-276 (R) SH 1/4 to 2/4 , 3/4, 4 (R) /4 Note :(i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4(ii)Mode of measurement Unit will be in Kilogram for the complete window except Glass / wire Gauge but incl fittings, ISI marked iron mongery and Grill/ Guard bar complete as per TD. The weight of windows will be finalized by the BOO to be convened by CWE before installation. The weight shall not include PCC back filling of the chowkhat.(iii) The PCC back filling in chowkhat of window, Sheet glass and wire gauge will be measured and paid separately against respective items.
106	ITEM NO.105 : Factory made steel window/ ventlatorfixed type (fabricated from P-tube sectionas shown on drawings) including necessary mild steel acessories etc. with glazing barsdovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-220R Sheet3/3.
107	ITEM NO.106 :Supply only stainless steel butt hinges 100 mm long medium, weightcomplete all as specified and directed by Engineer-in-Charge.
108	ITEM NO.107 :Aluminiumanodised of extruded fabricated type handle of size 100 mm long complete all as specified and directed by Engineer-in-Charge.
109	ITEM NO.108 : Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm longand fixingclips of sheet cast or extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
110	ITEM NO.109 :150 mm long Aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed by Engineer-in-Charge.
111	ITEM NO.110 :200 mm long Aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed by Engineer-in-Charge.
112	ITEM NO. 111 :Aluminium anodised extuded type , handle 150 mm long complete , all as specified and directed.
113	ITEM NO.112 : Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and conforming to Fe-410-W(Gde E-250 quality B)complete all as specified and directed by Engineer-in-Charge.
114	ITEM NO.113 : Mild Steel Framed work as in guard bars/grills, gratings, etc.. with ends of bars shouldered/welded and/or riveted, or forged into spikes; framed guard bars barred iron doorsframed balu sters,walkways ,railings frame work of water tanks and similar workladders, conforming to Fe-290 E-165 complete all as specified and directed by Engineer-in-Charge.
115	ITEM NO.114 : Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mmfixed with stainless steel wire staplescomplete all as specified and directed by Engineer-in-Charge.
116	ITEM NO.115 : Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clipsusing Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.
117	ITEM NO.116 : 4 mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm each and using Silicon for fixing of glass in addition to glazing putty complete all as specified and directed by Engineer-in-Charge.
118	ITEM NO.117 : Preparation of new or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applyingtwo coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.
119	ITEM NO.118 :Preparation of newly primed surfaces and applying two of synthetic enamel paint oversteel and iron surfaces of any description, not otherwise described, over 10 cm in width or girth, complete all as specified and directed by Engineer-in-Charge.
120	ITEM NO.119 : Preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
121	ITEM NO.120 : Preparation of new steel surfaces and applying two coatof syntheticenamel paint over a coat of primer (red oxide) of any description n. exe 10 cm in width or girth complete all as specified and directed by Engineer-in-Charge.
122	ITEM NO.121 :300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
123	ITEM NO.122 : Supply only 50 mm long cold rolled mild steel butt hinges medium weightcomplete all as specified and directed by Engineer-in-Charge.
124	ITEM NO.123 :25mm dia stainless steel fancy type drapery rodof wall thickness 1.6 mm fixed with including stain less steel decorativebrackets two Nos for each rodat both ends etc as in repairscomplete all as specified and directed by Engineer-in-Charge.
125	ITEM NO . 124 : Mild steel works as bands, straps supports or stays for rain water ventilating pipesincluding bothif required. hook (stay), heavy for large& staples, chainshand made sliding bolts,clamps, hold fast, wall ties hooks for hanging fans plain angle cleat for securing purlins to wood truss orrafter , knee pieces inserts two way and three ways strap, plate , washers andsimilar articles confirming to Fe 290 Gde E-165 completeall as specified and directed by Engineer-in-Charge. .
126	ITEM NO.125 : Factory made mild steel door shutter with frame, fabricated from of 1 mm thickMS sheetincluding provision of steel handle & locking arrangement by providing 04 lever lock with duplicate keys (of make Godrej, Link or Harrison)& handle etc, all as per Godrej pattern including spray painting over a coat of red oxide primer and fixing the same on existing cupboard nitchMS fasteners with cement & sand mortar, complete all as specified \"shown on drawing no. FD-1032Sheet 1/1 dated 25-09-1993 and directed by Engineer-in-Charge.Note : The shutter area only should be measued for payment.
127	ITEM NO. 12640mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides andcomplete all as specified.
128	ITEM NO.127 : Rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to aviod entry of insects,dust etc complete all as specified and directed by Engineer-in-Charge.
129	ITEM NO.128 : LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engineer–in–Charge
130	ITEM NO.129 : LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum)and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed by Engineer-in-Charge.
131	ITEM NO.130 : 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed byEngineer-in-Charge.
132	ITEM NO.131 : Stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete all as specified and directed by Engineer–in–Charge. Make : HETTICH, KAFE , GLEN, HARRISON AND GODREJ
133	ITEM NO.132 : Stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed by Engineer–in–Charge. Make HETTICH, KAFE , GLEN, HARRISON AND GODREJ
134	ITEM NO.133 :Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed by Engr–in–Charge. Make HETTICH, KAFE , GLEN, HARRISON AND GODREJ
135	ITEM NO.134 : ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finishedcomplete all as specified and directed by Engineer–in–Charge. Make HETTICH, KAFE , GLEN, HARRISON AND GODREJ
136	ITEM NO.135 : Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engineer–in–Charge. Make HETTICH, KAFE , GLEN, HARRISON AND GODREJ
137	ITEM NO.136 : Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops,cleats and the like of 2nd class Hardwood, including all necessary\" labours; articles n exc 200 cu. cm each complete all as specified and directed by Engineer-in-Charge.HWTTICH, KAFE , GLEN, HARRISON AND GODREJ
138	ITEM NO.137 : Steel water tubing, galvanised, medium grade, ISI marked, 15 mm bore with and including all fittings , cutting, threading and fixed to walls or fixing in concealed wallsor laid in floors and making good the surfaces to match the existing ones complete all as specified and directed by Engineer-in-Charge.
139	ITEM NO.138 : Steel water tubing, galvanised, medium grade, ISI marked, 20 mm bore with and including all fittings , cutting, threading and fixed to walls or fixing in concealed walls and making good the surface to matchthe existing ones or laid in floors complete all as specified and directed by Engineer-in-Charge.
140	ITEM NO.139 : Refixing old GI tubing 15mm bore galvanised with all fittings as in walls,ceilings or floors etc complete all as specified and directed by Engineer-in-Charge.
141	ITEM NO.140 : Refixing old GI tubing 20mm bore galvanised with all fittings as in walls,ceilings or floors etc complete all as specified and directed by Engineer-in-Charge.
142	ITEM NO.141 : Supplying and fixingin repairsVitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), P or S trap, complete all as specified and directed by Engineer-in-Charge.
143	ITEM NO.142 : PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.
144	ITEM NO.143: Supplying and fixingin repairs Vitreous China squatting pan of “Orissa Pattern” of size 580x440mm colouredwith integral footrest completeincluding making goods floor all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include provision of \"P\" Cast Iron trap.
145	ITEM NO.145 : 10 ltr capacity PVC valveless, syphonic action dual flush type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe in repairs complete all as specified and directed by Engineer-in-Charge.
146	ITEM NO.145 : Supply & fireing in repairshealth faucet ABS bodyincluding 1.00 m long easy flex tube in chrome withfinishes and wall hookcomplete all as specified and directed by Engineer-in-Charge\".
147	ITEM NO.146 : Supplying and fixingin repairs JET fighter spraywidth flexible arm , (suitable for European seat) complete all as specified and directed by Engineer-in-Charge.
148	ITEM NO.147 : Supplying and fixingin repair CP toilet paper holder with flap model complete all as specified and directed by Engineer-in-Charge.
149	ITEM NO.148 : Supplying and fixingin repairs pillars taps fancy typechromium plated, screwed down high pressure, with or without lettered \"Hot\"or cold with cast copper alloy with capston head long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore and fixed complete all as specified and directed by Engineer-in-Charge.
150	ITEM NO.149 : Supplying and fixingin repairs vitreous china wash hand basin white flat back of size 550x440mm including CI brackets ,chromium plated waste coupling, waste pipe etc., (including all waste fittings) complete all as specified and directed by Engineer-in-Charge.
151	ITEM NO 150 Supplying & fixing vitreous chinawash hand basin while Hat back of size 550 x 440 mm including CI brackets, chromium plated waste coupling, waste pipe etc (including all waste fittings) complete all as specificed and directed
152	ITEM NO.151 : Brass chromium plated WHB Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.
153	ITEM No. 152 Supply & fixing in repairs brass chromium plated WHB Mixer valve formixing hot and cold water screwed down for 15mm dia iron pipe compelte all specified and directed by Engr -in- charge.
154	ITEM NO.153 : Supplying and fixingin repairs 15 mmchromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipeor unioncomplete all as specified and directed by Engineer-in-Charge.
155	ITEM NO.154 :Supply & fixingBib tap, cast copper alloy, chromium plated, fancy type,Long bodyscrewed down, high pressure,with crutch or butter fly handle suitable for 15 mm bore pipe or union, complete all as specified and directed by Engineer-in-Charge.
156	ITEM NO.155 : Supplying and fixingin repairs stainless steel gratingopenable 100mm sizewith/without hole including fixing with white cement complete all as specified and directed by Engineer-in-Charge.
157	ITEM NO.156 : Supplying and fixingin repairs 15mm bore angle cock cast copperalloy chromium platedfancy type screwed down high pressure with crutch or butterfly handlecomplete all as specified and directed by Engineer-in-Charge.
158	ITEM NO.157 : Supply & fixed 15mm bore angle cock cast copperalloy chromium plated fancy plate screwed down high pressure with crutch or butterfly handlecomplete all as specified.
159	ITEM NO.158: Supplying and fixing stop valves (concealed type),cast copper alloy, fancy type chromium platedscrewed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions,long shank and cup of 15 mm bore complete all as specified and directed by Engineer-in-Charge.
160	ITEM NO.159 : Supply and fixing in repairschromium plated stop valve (Concealed type) cast copper alloyscrewed down long shank and cup of 15mm bore high pressure with crutch or butterfly handle screwed both endsforiron pipe or unions complete all as specified and directed by Engr-in-Charge.
161	ITEM NO.160 : Supplying and fixingin repairs 20 mm chromium plated stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.
162	ITEM NO.161 : Supplying and fixing fancy type shower rose 125mm dia sizeof Rim and 30cm long CP brass pipe with swivel jointincluding fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.
163	ITEM NO.162Supplying and fixingin repairs Fancy type shower rose125mm dia sizeof Rim and 30cm long CP brass pipe with swiwel joint in complete all as specified and directed by Engineer in Charge.
164	ITEM NO.163 : Supplying and fixingChromium plated hand showerwith 1.50 m long flexible tube complete all as specified and directed by Engineer-in-Charge.
165	ITEM NO 164 : Supply and fixing in repairs CP wall mixer telephonic type for mixing hot and cold water screwed down for 15 mm dia iron pipe complete all as specified and directed byEngineer-in-Charge.
166	ITEM NO.165 : CP wall mixer telephonic type for mixing hot and cold water screwed down for 15 mm dia iron pipecomplete all as specified and directed by Engineer-in-Charge.
167	ITEM NO.166 : Supplying and fixingCorner glass shelf with CP stand complete all as specified and directed by Engineer-in-Charge.
168	ITEM NO.167 : Supplying and fixing Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge.
169	TEM NO.168 : Supplying and fixing in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge.
170	ITEM NO.169 : Supply & Fixing in repair chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.
171	ITEM NO.170 Supply and fixing chromium plated soap dish , fixed to plugs with chromium plated brass screws complete all as specifiedand directed by Engr-in-Charge.
172	ITEM NO.171 : Supply and fixed in repair brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.
173	ITEM NO.172 : Supply and fixed brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.
174	ITEM NO.173 :PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.
175	ITEM NO.174:PVC connections 15mm size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed by Engineer-in-Charge.
176	ITEM NO.175Stainless steel plate rack of standard size 1000mmx750mm mm complete and fixing with rawl plug and steel screws of weight not less than 8kg each complete all as specified and directed by Engineer in Charge.
177	ITEM NO.176 : Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings iechromium plated waste coupling, waste pipe complete all as specified and directed by Engineer-in-Charge.
178	ITEM NO. 177 : Sink without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, waste pipe complete all as specified and directed by Engineer in Charge.
179	ITEM NO.178 : Supply and fixed 600x450mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, chromium plated screws, cup and washers complete all as specified and directed by Engineer-in-Charge.
180	ITEM NO.179 :Supply and fixing in repair PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed by Engineer-in-Charge.
181	ITEM NO.180 : 75mm bore cast iron bends any radius with oval access door and diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.
182	ITEM NO.181 : 75mm bore Cast Iron sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete
183	ITEM NO.182 : 75mm borecast iron soil waste and vent pipe in any length with or without ears with cement joints fixed to wall complete all as specified and directed by Engineer-in-Charge.
184	ITEM NO.183 : 100 mm bore cast iron soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or floor complete all as specified and directed by Engineer-in-Charge.
185	ITEM NO.184 : 100 mm bore cast iron soil waste and vent pipe in any length with or without ears with cement joints fixed to walls complete all as specified and directed by Engineer-in-Charge.
186	ITEM NO. 185: Stack clamps made of 50mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts & nuts and securing ends of stays to wall or roof for 75 mm bore CI Pipe complete all as specified and directed by Engineer in Charge.
187	ITEM NO. 186: Stack clamps made of 50mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts & nuts and securing ends of stays to wall or roof for 100 mm bore CI Pipe complete all as specified and directed by Engineer in Charge.
188	ITEM NO. 187 :Cast iron P or S trap 100 mm bore complete all as specified and directed by Engineer in Charge.
189	ITEM NO.188 : 100mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed by Engineer-in-Charge.
190	ITEM NO.189 : CI 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.
191	ITEM NO.190: CI 100 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.
192	ITEM NO.191 : CI 100mm bore branch piece double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.
193	ITEM NO.192 : Cast Iron 100mmsocket (double collars), complete all as specified and directed by Engineer-in-Charge.
194	ITEM NO.193 : CI floor traps complete 75 mm bore outlet including jointing to waste pipe fixed in cement concrete type1:2:4 type B 1 complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include embedding the floor trap in PCC block of size 300 mm x 300 mm x 250 mm block of PCC 1:2:4 type B-1
195	ITEM NO.194 : Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 100 mm bore pipe include for hacking out cement joints or burning out lead joints and collecting useful materials and removing them to stores/credit complete all as specified and directed by Engineer-in-Charge.
196	ITEM NO.195 : Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 75 mm bore pipe include for hacking out cement joints or burning out lead joints and collecting useful materials and removing them to stores/credit complete all as specified and directed by Engineer-in-Charge.
197	ITEM NO 196 : 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.
198	ITEM NO.197 : 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.
199	ITEM NO.198 : PVC(SWR)bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.
200	ITEM NO.199 : Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tank capacity n exc 500 Ltr complete including disconnecting and refixing after cleaning the tank all as specified and directed by Engineer-in-Charge.
201	ITEM NO.200 : Salt-glazed stoneware (SGSW) gully traps,150x150 square or round mouthed, type \"P\" setting and jointing to drains with cement mortar 1:1 complete all as specified and directed by Engineer-in-Charge.
202	ITEM NO.201 Cast Iron vent cowl 100 mm bore size, complete all as specified and directed by Engineer in Charge.
203	ITEM NO.202 : Wire brushing and cleaning the top surfaces of tiles, lime terracing or cement concrete, roof surfacesetc. with water including flashings and junction of parapets etc. complete all as specified and directed by Engineer-in-Charge.
204	ITEM NO.203 : APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.0 Kg/Sqmblack finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or abutangas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface complete all as specified and directed. Note :- The water proofing treatment shall be got carried out by the manufactarer or their authorised applictor\"s duly approved by GE in writing.
205	ITEM NO.204 : Heat resisting painting to surfaces of any description wood, steel, iron, concrete, brick, stone, APP surface, etc., exceeding 10cm in width or girth incl preparation of APP surfaces complete all as specified and directed by Engr-in-charge
206	ITEM NO.205 : Rolled mild steel as in roof truss (framed) trussed purlins crane gantries, rails and fastening and heavybracket framing (beam, tee angle channel or flat section) including distance pieces, cleat etc conforming to Fe-410 W (Gde E-250 ) quality \"A\" complete all as specifed and directedby Engineer-in-Charge.
207	ITEM NO.206 : Rolled Mild steel work as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment for covering to steel doors, gates including necessary welding, confirming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.
208	ITEM NO.207 : Supply and fixinginrepairs Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directedby Engr-in-charge.
209	ITEM NO.208 : Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directedby Engr-in-charge.
210	ITEM NO. 209 :Cutting into existing manholes for connecting new drains, making good to pipe and rendering,cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and as directed by Engineer in Charge.
211	ITEM NO. 210 : Material and labour for carrying out water proofing treatment of sunken floor complete all as specified under :-- (i) The concrete / wall surface shall be cleared thoroughly of all laitance,loose particles ,dust,grease etc and any friable and unsound area which shall be chipped,cleaned and thereafter pre-wetted to a saturated surface dried condition(ii) In case of pot holes/superficial cracks,the same shall be repaired with polymer modified mortar using URP as admixture @ 10% of cement content (iii) The polymer modified mortar using URP as admixture @ 10% of cement content shall also be applied on vertical surfaces after removing of plaster upto 60 cm height (iv) The surface thus prepared shall be coated by applying 2 coats of Dr Fixit Hydrochem Super in the sunken areas and extending it upto 150 mm above the finished floor level.This includes layer of a 150 mm wide strip of an open woven glass fiber mesh over the PCC benching (Gole) on the 1st coat while it is still wet(v) Rendering 10 mm in CM 1:4 admixed with integral water proofing compound LW+ @ 200 ml per bag of cement complete all as specified and as directed by the Engineer-in-Charge.
212	ITEM NO. 211 : Material and labour for Precast Cement concrete Type B1, 1:2:4using 20 mm graded crushed stone aggregates as in coping knee , apex stone, curbe stone, column, fencing post, door cills deck, slab, precast slub etc and like, set in cement mortar1:4complete all as specified and directed by the Engineer-in-Charge.
213	ITEM NO. 212 : Material and labour for Cement concrete (1:5:10), type E-2, using 40 mm gradedmechanically crushed stone aggregates as infilling in sunken floor,rounded or chamfered on edges complete all as specified and directed by the Engineer-in-Charge.
214	ITEM NO. 213 : supply & fixing in repairs Galvanised irontubes, `medium grade\",40 mm bore, withas in spoutcomplete all as specified and directed by the Engineer-in-Charge.
215	ITEM NO.214 :Cutting holes n. exc 150 Sq. cm into or through brick walls built in cement mortar and making good in cement concrete 1:2:4 type B-1 as required complete all as specified and directed by Engr-in-Charge of depth .
216	ITEM NO.215 : Material & labourfor applying Two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt restance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over newsurfaces complete as all spfd and directed by EIC
217	ITEM NO.216 : Complete removal of existing treatment of wall and applying Two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt restance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/10 Sqm over oldsurfaces complete as all spfd and directed by EIC
218	ITEM NO 217: Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth completeall specifiedand directed by Engr-in-Charge
219	ITEM NO. 218 :Material & Labour for preparationof new plastered surface and applying two coats or more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete , as per manufacturer\"s specification. complete as specified and directed.
220	ITEM NO. 219 : Complete removal of existing treatment of oldwall surface and applying Twoor more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete , as per manufacturer\"s specification. complete as specified and directed.
221	ITEM NO. 220 :Material & Labour for post anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by theEngr-in-charge.
222	ITEM NO. 221 : Material & Labour for post anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed by theEngr-in-charge.
223	ITEM NO. 222 : Material & Labour for post anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by the Engr-in-charge.
224	ITEM NO. 223 : Baroda Green marble, 15-18 mm thick,machine cut, laid over & including 15 mm bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick(average thickness) cement mortar(1:4) screed, as in tread of Stair casecomplete , allas specified and directed by Engr- in- Charge.
225	ITEM NO. 224 : Supply & Fixing 150 mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor completeall specifiedand directed by Engr-in-charge.
226	ITEM NO. 225 : Supply & Fixing CP Water purifier RO Connecting piece for Water Bib Tap for inlet of RO etc completeand directed by Engr-in-charge.
227	ITEM NO.226 :Supply & Fixingtwo way bib Tap chromium plated brass fancy type of 15 mm bore completeall as specified and directed by Engr-in-charge. Make JAQUAR continental series Cat no:-CQT23041.
228	ITEM NO.227 :Supply & Fixingtwo way angle valve cock chromium plated brass fancy type box complete all as specified anddirected by Engr-in-charge. Make L & K cut part No - 0327 or equivalent
229	ITEM NO.228 : Supply & Fixing in repair Towel ring square with round flange complete all as specified and directed. Make JAQUAR or Equivalent.
230	ITEM NO. 229 :Supply & Fixing Towel ring square with round flange complete all as specified and directedMake JAQUAR or Equivalent.
231	ITEM NO. 230 :Supply & Fixing for CI Bends (as radius) with duck \"s foot or heel rest 75 mm complete all as specified anddirectedby Engr-in-Charge.
232	ITEM NO. 231 :Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep as in soft /loose soil for foundation etc or for shaft walls,cesspit, manhole etc n.exc 10 sqm on plan complete and directedby Engr-in-Charge.
233	ITEM NO. 232 :Returing, filling spreading,levelling and well ramming in layers not excedding 25 cm in each layer as in soft /loose soilcomplete and directedby Engr-in-Charge.
234	ITEM NO. 233 :Removing excavated material and debries obtained from demolistion to a distance exc 250 m but n exc 500 m and depositing where directed at a level n exc 1.50 m above the starting pointcomplete and directedby Engr-in-Charge.
235	ITEM NO. 234 :Cleaning of sludge from the manholes by taking out loose sediment sand,girt, ash, sludge water, rags,fibres or vegetation from manholes including removal of sludge/ debris to a distance exceeding 250 m but not exceeding 500m and buried under ground c complete and directedby Engr-in-Charge.
236	ITEM NO. 235 :Demolition of cement concrete unreinforced of any description and in position not otherwise specifically provided forcomplete and directedby Engr-in-Charge.
237	ITEM NO. 236 :Removing building materials etc (other than spoil payable under items 03028 to 03031 in section 3- Earthwork) to a distance of 5 KM or under beyond the lead included in the rates including loading, unloading and stacking at the destination complete and directedby Engr-in-Charge.
238	ITEM NO. 237 :Excavation in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50m and making good surface complete and directed by Engr-in-Charge.
239	ITEM NO. 238:Material & labour for cement conc 1:3:6 type C-2 (40 mm graded Mechanically crushed aggregate) as in post/strut foundation complete and directed by Engr-in-Charge.
240	ITEM NO. 239 :Surface dressing not exc 15 cm deep in soft/loose soil complete and all as specified.
241	ITEM NO. 240 :Surface excavation n.exc 30 cm deep and averaging 1.5 cm deep and gettingout in soft loose soil complete and all as specified
242	ITEM NO. 241 : Removing excarated soil exc 1.5 Km but n. exc 5 Km and deposited where directed by Engr -in-charge.
243	ITEM NO. 242 : Material and labour for sand filling under floor or in foundation including watering and consolidation complete and directed by Engr -in-charge.
244	ITEM NO. 243 : Material and labour for 60 mm thick coloured Machine pressed ofconcrete inter locking paver block any shape and size confirmming to IS-15658 -2006 of 60mm thickness M-35 grade with grey cement and no pigment to match complete all as specified anddirected by Engr -in-charge.
245	ITEM NO. 244 : Material and labour for 80 mm thick coloured Machine pressed precast concrete inter locking paver block any shape and size confirmming to IS-15658 -2006 of 80mm thickness M-40 grade with grey cement and no pigment to match complete all as specified anddirected by Engr -in-charge.
246	ITEM NO. 245 :Dismanling of RCC posts or struts(wood, steel or RCC) in any section in fencing including taking out embedded portions and making good disturbed ground complete all as specified anddirected by Engr -in-charge. Note : Post embedded in natural ground.
247	ITEM NO.246 : All as per item No 245 above but posts embedded in concreted brick masonryetc complete all as specified anddirected by Engineer-in-Charge.Note : The shutter area only should be measued for payment.
248	ITEM NO. 247 : Taking down existing barbed wirewith fencing of any description and removing the unservicable wire from site complete all as specifed and directed by Engr -in-charge.
249	ITEM NO. 248 : Mild steel work conforming to Fe-290 or Gde E-165 as in Fencing posts and struts including cutting bending top to shape asdirected drilling holes matching forbarbed wire, including fillet on backside of fencing post and all necessary drililngwork complete all as specified and directed by Engr -in-charge.
250	ITEM NO. 249 : Supply only chain link fencing using 3.15 mm to 4 mm dia GI wire 75x 75 /100x 100 mm mesh including line wires andy mesh, size and type to any type of standards, nail , straining bolts etc including provision of binding wirecomplete all as specifed and directed by Engr -in-charge.
251	ITEM NO. 250 : Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards , straining bolts etc including provision binding wire complete all as specified and directed by Engr -in-charge.
252	ITEM NO. 251 : Supply & fixing flat iron of size as directed as in fixing clamps or supportto chain link fencing & struts etc fixed with nut and bolts making necessary hole & complete all as specified and directed by Engr -in-charge.
253	ITEM NO. 252 : Mild steel round bars 10 mm dia and over, cut tolength, bent to shape required including cranking bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Gde- IIS - 432 (part-I) complete and all as specified
254	ITEM NO. 253 : Mild steel screw bolts (Machine made) 5 to 10 mm dia of shank with hexagonal or square heads at one end and screwed the other each screw end to be fitted with washers and one hexagonal or Square nut exc 5 cm but n. exc 10 cm long complete and all as specified
255	ITEM NO. 254 : Demolition of PCC in any position not otherwise specifically provided for assurface channel,drains, manholes capings and removing debries outside MD land complete all as specified and directed by Engr-in-charge
256	ITEM NO. 255 : Demolition of RCC Manhole cover including RCC stab set in cement mortar complete all as specified anddirected by Engr-in-charge
257	ITEM NO. 256 : Preparing of new steel surfaces and applying two coat of sunthetic enamel paint over a coat of primer (red oxide) surfaces of any description n.exc 10 cm in width or girth complete all as specifed and directed by Engr-in-charge
258	ITEM NO.257 : Taking down Copper/Aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such asswitches, ceiling roses , pendats, regulator, sockets removing to material to store for keeping in safe custody for taking credit(credit for above items should be made as per condition seperately) and making good distrubed surface of walls, floors etc complete all as specified and directed by Engineer-in-Charge.Note :-- Rate for cutting /chasing in walls and making good deemed to be included in quoted rate.
259	ITEM NO.258 : Taking down ceiling fan any size or any type and deposited to concered AGE E/M store yard complete all as specired and directed by Engineer-in-Charge.
260	ITEM NO.259 : Taking down old exhaust fan any sizeor any typeanddepositedto concernedAGE E/M store yard complete all as specified anddirected by Engineer-in-Charge.
261	ITEM NO.260 : Taking down old unserviceable /serviceable single or three phase electric meterand old Meter shall be depositedto concernedAGE E/M store yard complete all as specified anddirected by Engineer-in-Charge.
262	ITEM NO.261 : Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface complete all as specified anddirected by Engineer-in-Charge.Note :-- Rates for cutting/chases in walls and making good disturbed area deemed to be included in the quoted rate
263	ITEM NO.262 : Taking up old unserviceable earthing of any type complete all as specified anddirected by Engineer-in-Charge.
264	ITEM NO.263 : Taking up old unserviceable cable any type/any size complete all as specified anddirected by Engineer-in-Charge.
265	ITEM NO.264 : Taking down old and unverservicable MCB DB TPN/SPN /metal clad socket and making good the distributed surface specified and directed by Engineer-in-Charge.
266	ITEM NO.265: Taking down old and unverservicable MCB any size any type all as directed specified and directed.
267	ITEM NO. 266 Taking down of water heater any typesize / capacity with all accessories after removing of old connection and deposited to concerned AGE E/M store yard for repairs complete all as specified and directed by Engr - in- Charge.
268	ITEM NO.267 :Point wiring using approved colour coding as per IS with stranded copper conductor 1.5 sqmm (Nominal area) , single core, flameretardant low smoke and low halogen (FRLSH) PVC insulated and unsheathed cabel 1100 volts grade ISI 694 marked multi stranded copperconductor including heavy duty pvc concealed conduit and its fitting ISI marked PVC junction boxes, mild steel sunken boxes (terminal boxes) with earth dolly, duly painted internally & externally with two coats of anti corrosive paint over a coat of redoxide primer covered with 3 mm thickhylam sheet including flame retardant low smoke and low halogen (FRLHS ) PVC insulated unsheathed stranded copper conductor 1.5 sq mm (Nominal area) single core cable as earth dolly complete all as specified for the following :-Note : cutting /chasing of wall etc deemed to be included in the quoted rate of this item.
269	ITEM NO. 267 :(a) one light point controlled by one switch or one (celling/wall/Exhaust) fan point controlled by one switch and regulator.
270	ITEM NO. 267:(b) one 3 pin 5 Amps socket outlet on independent board
271	ITEM NO. 267 :(c) One 3 pin 5 Amps socket outlet on same board with other switches
272	ITEM NO. 267 :(d) One light point controlled by two, two way switches.
273	ITEM NO 268 All as per srl item no above but for one socket point 15 Amp with 2.5 Sq mm PVC unsheathed. FRLSH 1100 volt grade ISI markedwith multistranded copper conductor alongwith 2.5 Sqmm green colour FRLSH 1100 volt grade ISI marked copperwire as earth continuity conductor connected to common earth dolly complete all as specified as directed by Engineer -in -charge.
274	ITEM NO .269 All as per srl item no above but for one socket point 15 Amp with 4.00 Sq mm PVC unsheathed. FRLSH 1100 volt grade ISI markedwith multistranded copper conductor alongwith 4.0 Sqmmcolour FRLSH 1100 volt grade ISI marked copperwire as earth continuity conductor connected to common earth dolly complete all as specified as directed by Engineer -in -charge.
275	ITEM NO. 270 : Modular Switch one way 16 Amps one module complete all as specified and directed.
276	ITEM NO. 271: Modular Switch one way 16 Amps one module complete all as specified and directed.
277	ITEM NO. 272 : Modular socket 6 Amps 5 pinsone module complete all as specified and directed.
278	ITEM NO. 273: Modular Socket 6/16 Amps 6 Pins 2 module complete all as specified and directed.
279	ITEM NO. 274 :Modular fan regulator step type 2 module complete all as specified and directed.
280	ITEM NO. 275 :Celling rose surface type back 65 x 20 mm size three terminal complete all as specified and directed
281	ITEM NO. 276 :Electric AC ding dong bell type 230 volt single pole complete all as specified and directed.
282	ITEM NO. 277 :Lamp holder suitable for batton fitting insulated body with back plate completeall as specifed and directed by Engr -in- Charge
283	ITEM NO. 278 :Indoor decorative LED tube light fitting box type with opal diffuser , high efficient PVC housing body suiable for and including LED tube high efficient AC - 220-240 Volts 50 HZ and including 18/20 LED tuberod (luminaries) environment friendly TB with aluminum extrusion heat sink connecting with copper conductor flexible cable from rose to connector of light complete all as specified and directed.
284	ITEM NO. 279 :supply and fixing LED surface mounted bulk head luminaries 8-10 W with min 800 lumen industrial model IP 65, Aluminum housing, surge protection including driver & LED etc complete all accessories connecting with copper conductor flexible cable from ceiling rose to connector of the light incomplete all as specified and directed.
285	ITEM NO.280 : Surface mounted wall mirror LED light compact & study 10 Watt LED decorative fixture with anti glare polycarbonate diffuser , multi purpose lighting solution & application. all accessories & fixture , internally prewired and connecting by providing copper flexiblewire 23/0076 mm twin core upto fittingcomplete all as specified and directed.
286	ITEM NO.281 : LED light fitting 9/12 watt wall mounting fixture (Sketch type) in woodern housing, suitable for retorfit LED Lamp compact and engery efficient epoxy power coated light luminaire including disconnecting and taking down existing unservicable light fittings of any description complete all as specifed and as directed by the Engineer in charge
287	ITEM NO.282 :LED Bldg Security Light fittings of capacity 35-40 watt made up of die cast aluminum housing with balck expoxy powder coatingwith cover heat resistance glass safety input voltage 170 to 270 Volts with IP-66 protection and other connected accessories including service bracket of MS pipe 25/32 mm boreof length 0.9 m with MS clamps, bolts, nuts and washers and suitable reducer for connecting to MS pipe as required at site and making electrical connection completeall as specified and directed.
288	ITEM NO. 283 : Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as specified and directed
289	ITEM NO.284 :MCB DB 4 way TPN Double door powder coated completealongwith 200 Amp , 415 Volts rated bus bar IP 43 protection , suitable for MCB 4 Pole 63 Amp as incommer. complete all as specified and directed Note :Thimble/lugs of rating of MCB TPN should be used with wire for fixing in the MCB .
290	ITEM NO.285 : Supply and fix MCB TPN 63 Amps 440 volts 10 KA C Curve complete all as specified and directed.
291	ITEM NO.286 : Fixing only MCB DB verticle type 4 way TPN, double door . Complete all as specified and directed Note :Thimble/lugs of rating of MCB TPN should be used with wire for fixing in the MCB
292	ITEM NO. 287 :Sheet metal MCB DBs 12 way with 200 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block, including copper lugs, thimbles duly crimped for connection complete all as specified and directed.
293	ITEM NO. 288 :Sheet metal enclosers MCB DBs 240 volts, 4 way, double door type grouting in wall in cement mortar making good of disturbed surfaces and matching with existing and electric connection complete allas specified and directed.
294	ITEM NO. 289 : Fixing only MCB DB SPN 8 way double door complete all as specified and directed Note :Thimble / Lugs of rating of MCBTPN should be used with wire for fixing in the MCB.
295	ITEM NO. 290 :MCB SP 6-40 Amps, 240 Volts 10 KA \"C\" Curve including removing old unservicable MCB complete all as specified and dierected.
296	ITEM NO. 291 :Fixing only MCB SP 6.32 Amps complete all as specified and directedNote : Thimble /lugs of rating of MCB should be used with wire for fixing in the MCB
297	ITEM NO. 292 :Fixing only MCB SPN 6-40 Amps complete all as specified and directedNote : Thimble lugs of rating of MCB should be used with wire for fixing in the MCB
298	ITEM NO. 293 :MCB SPN 6-32 Amps, 240 Volts 10 KA \"c\" curve complete all asspecified and dierected.
299	ITEM NO. 294 :MCB SPN 40-63Amps, 240 Volts ,10 KA C Curve complete all asspecified and dierected.
300	ITEM NO.295 :Hanging only ceiling fan after cleaning/painting in any model/size etc and making all connectingusing three core copper conductor flexible cable in size 1.5 sqmm including drawn throughPVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed
301	ITEM NO.296 : Fixing only exhaust fan after repair in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed.
302	ITEM NO.297 : Exhaust fan , steel body , AC single Phase 230 V of size 300mmwith bladesframe and louvers complete all as specified.
303	ITEM NO.298 : Supplyand fix ceiling fans AC , single Phase 230 volt50 Hz copper wounded of 1200 mm sweep with BLDC technology max power input uptoto 35 watt copper wire induction motor with 5 star BEE ratings including remote and set of batteries complete alongwith canopy cover down road U clamp 03 core PVC flexible cable 1 sqmm for making connection of fan and hanging the fan in clamp connecting the existing electricalconnection all as specified and as directed by Engr in charge. Note : MES No shall be written by the contractor with parmanent marker over ceiling fan of specified size and colour and quoted rate shall be deemed to be included of this element.
304	ITEM NO.299 : Refixing of water heater any type and any size/capacity with all assessories such as nut bolt washer PVC pipe etc with making all connection using three core copper conductor flexible cable drawn through in PVC flexible conduit pipe including painting with two coats of super enamelled paint of existing shadecomplete all as specified and directed.
305	ITEM NO.300 : Water heater storage type electric of capacity 25 ltr having BEE rating suitable for 230 Volt , 50 HZ single phase AC supply complete all as specified and directed.
306	ITEM NO.301: Refixing of servicable electronic energy meter 5 to 30 Amps capacity complete all as specified and directed.
307	ITEM NO.302 :Sub main wiring with tworun four core, 10 sqmm PVC insulated , unsheathed cable FRLS-H 1100 volt grade ISI marked with multi stranded copper conductor with one run of 10 sqmm PVC insulated , un sheathed cable FRLS-H 1100 volt grade ISI marked multistrunded copper conductor connected to common earth dolly including capping & casing or concealed on wall/ceiling in PVC conduit medium grade not less than 25 mm dia ISI marked of adequate size of housing the wires complete all as specified. Note (i) Thimble/lugs of rating of MCB should be used with wire of fixing in the MCB (ii) Three run of 10 sqmm cable will be measured as one unit.
308	ITEM NO.303 :Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with stranded copper conductor of 4 sqmm drawing in & excluding PVC concelaed conduit ISI marked with all assesoroies on walls and making good of distrubed surface including all conduit fittingsclamps, gutties etc and one addition wire of 4.0 Sqmm but green in colour for earth DB and boxes with proper thimbles all as specified and directed.Note :(1)Thimble/lugs of rating of MCB should be used with wire of fixing in the MCB (ii) Three run of 4 Smm cable will be measurewd as one unit.
309	ITEM NO.304 :PVC conduit 15 mm dia with 1 run of 1.5 sqmm copper wire drawn through including cutting and chasing in wall and accessories such as bend , T socket etc for invertor circuitcomplete all as specifed and directed.
310	ITEM NO.305: Supply and fixingheavy duty wall mouting fan 400 mm sweepwithcorrosion resistant PVC body minimum noise, operation and maintance free designtotally enclosed highly efficient heavy duty motorwith pressure die cast aluminumrotor mounted on two ball bearings aerody namically contoured blades rigid frame ,1400 RPM PVC blades and testingcomplete all as specified and as directed by Engineer in Charge.
311	ITEM NO.310 : GI tubing light grade with connected fittings laid in trenches/wall/Pole for protectionto under ground of cable complete all as specified and directed .
312	ITEM NO.306:Protection of cablewith one layer of new bricks laid flat butting to each other in such a way that the per length of the bricks is at right angle to the central axis of the cable using oldsizesub class B bricks complete all as specified and directed.
313	ITEM NO.307 : PCC (1:3:6) type C-1 using 20mm gradedmechnically crushed stone aggregate as in coping,road cutting/hard standing width not more than 0.30 m and depth 0.15 including necessary form work etccomplete all as specified and directed.
314	ITEM NO.308 : Supply and fixingLED lamp 9 watt suitable battern holder complete allas specified and directed.
315	ITEM NO.309 :MCCB DB 6 way TPN double door powder coatedcomplete alongwith 200 Amp & 415 volts rated bus bar IP 54 Proptection , suitable for MCCB 4 pole 125 Amp as incommer. Complete all as specified and directed.Note : Thimble/lugs of rating of MCB TPN should be used with wire for fixing in the mCB.
316	ITEM NO.310 :MCCB 4 Pole 415 volts fixed type 125 Amps suitable for VTPN DB with breaking capacity 16 KA complete all as specified and directed.
317	ITEM NO.311 : Modular TV socket complete all as specified and directed.
318	ITEM NO.312 : PVC conduit 15 mm dia with 1 run of coaxial cable suitablefor TV connection copper wire drawn through including cutting and chasing in wall and accessories such a bend, T, Socket etc for cable TV complete as as specified and directed.
319	ITEM NO.313: Submain wiring with two single core FRLSH PVC insulated and unsheathed cable with stranded copper conductor of 2.50 sqmm drawing inand exculding PVC conduit conduct ISI marked with all accessories on walland making good of disturbedsurfaces including all conduit fitings, clamps gutties etc and one addiitional wire of 2.50 Sqmm but green in colour for earth DB5 and boxes with proper thimble complete and all as specified and directed by Engineer-in-Charge. Note (i) Thimblelugs of rating of MCB should be used with wire for fixing in the MCB.(ii) 3 run of 2.50 Sqm cable will be measured one unit.
320	ITEM NO.314 : Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with stranded copper conductor of 6.00 Sqmm drawing in & excluding PVC concealed conduit ISI marked with all accessories on walls and making goods of disturbed surfaces including all conduit fittings , clamps gutties etc and one addtional wireof 6.00 sqmm but green in colour for earth DBS and boxes with proper thimbles all as specified and directedNote: Thimbles/lugs of rating of MCB should be used with wire for fixing in the MCB (ii) Three run of 6.00 sqmm cable, wall be measured as one unit.
321	ITEM NO.315 : Sheet metal enclosure vertical distribution board VTPN (MCCB DB ) 4 way , double door 415 Volts with 200 Amps rated bus bar IP-43 protection with shroutedneutral bus bar and insulated busbar & earth link, with and including adjustable thermal setting MCCB 4 pole 125 Amps, 25 KA as incomer and MCBs as outgoing complete with making suitable size of MS cabinet 2mmthick duly grouted on the wall (Flush) with opening arrangement including and making connection with suitable size of lugs and making good the disturbed surfacematching with existingsurface all as specifiedand directed.
322	ITEM NO.316 :SPN distribution board 8 way double door IP 43 as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing , reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles completeall as specified and directed.
323	ITEM NO.317 :MCB SP 240 Volts, 50 HZ breaking capacity 40-63 Amps, ISI marked complete all as specified and directed.
324	ITEM NO.318 :MCCB 160 Amps 4 Pole 36 KA 415 volts, 50 Hz complete all as specified and directed.
325	ITEM NO.319 :Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (medium grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as shown on drawings and as specified and directed by Engineer-in-Charge.Note : The unit rate includes for protecton pipe 15mm and GI earth wire 4mm dia from top of earth plate upto 7.50 metre above ground level.
326	ITEM NO.320 : XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (1100 volt) cross sectional area 50 sqmm, 3.5 core,stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, 1100 volts grade, ISI marked,laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified.
327	ITEM NO.321: XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (110 volts) cross sectional area 16 sqmm, 2 core,stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified.
328	ITEM NO.322 : Excavation/cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 30 cm in width for passing of cable through GI pipe, returning filling & removal spoil materials making good existing surfaces complete and directed by Engr-in-charge
329	ITEM NO.323 : Clean dry sand laid in frenches /duts for beddin andto cable 8 cm in depth before laying the cable and 15 cm often laying the cableincluding spreading levelling and consolidation complete all as specified anddirected .Note : consolidated /panned sand shall be measured for payment purpose.
330	Note: For the purpose of arriving at contract amount, the amount of credit Rs 1660190.25shall be deducted from the total amount arrived.
331	TotalRs.

Also Visit

Tenders

Haryana Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Addition / Alteration And Up Gradation And Connected Wks Of Offers, Jcos And Ors Married Accommodation At Ambala Cantt., Ambala-Haryana

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Addition / Alteration And Up Gradation And Connected Wks Of Offers, Jcos And Ors Married Accommodation At Ambala Cantt., Ambala-Haryana

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us