Military Engineer Services-MES has published Tender For Addition/ Alteration At Lakshya Hangar For Construction Of Spurt Workshop And Storage Compartment At Ins Dega, Visakhapatnam. Submission Date for this Tender is 11-09-2023. Shed Construction Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Aug-2023 | OTHER CORRIGENDUM | Other | 26-08-2023 |
| 2 | 19-Aug-2023 | BOQ CORRIGENDUM | BOQ | 26-08-2023 |
| 3 | 26-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-09-2023 |
| 4 | 02-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-09-2023 |
| 5 | 07-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-09-2023 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in Soft / Loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5m wide and and depth exceeding 1.5m but not exceeding 3m and getting out in Soft / Loose soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 4 | Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed. |
| 5 | M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding15 cm thick watered and rolled with power road roller of 8 to 12 ton capacity and consolidated to required gradient and camber complete all as specified. |
| 6 | M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. |
| 7 | M & L for RCC M–30 Design Mix, using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc. complete all as specified. |
| 8 | M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc. complete all as specified. |
| 9 | M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels etc. complete all as specified. |
| 10 | M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. |
| 11 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed. sides of concrete |
| 12 | Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed. |
| 13 | Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels,cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for fair finished surfaces of concrete complete all as specified and as directed. |
| 14 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 15 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 16 | S & F Rolled Mild Steel work confirming to Fe 410-W, Grade-E- 250, Quality-Aas in Compound Girders and Stanchions, Lattice Girders, Aerial Masts, Staging for Water Tanks and the like including Caps, Bases, Splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed. |
| 17 | S & F Rolled Mild Steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in Roof Trusses [framed], trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing [Beam, tee, angle, channel or flat sections] including distance pieces, cleats etc complete all as specified and as directed. |
| 18 | S & F Mild Steel work as in Tubular Trusses, Posts etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS - 1161, Grade YST - 240,Medium Grade of any diacomplete all as specified and as directed. |
| 19 | S & F Rolled Mild Steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in Plates [plain & chequered], Channels, Angles, square cut or notched [ordinary or counter sunk] forming holes without any attachment complete all as specified and as directed. |
| 20 | S & F MS screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square nut, length exceeding 30 cm but not exceeding 45 cm long, dia of neck exceeding 16 mm but not exceeding 20 mm complete all as specified and as directed. |
| 21 | S & F Steel rolling shutters, thickness of laths of 1.25 mm, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, pull push type, complete all as specified and as directed. |
| 22 | M & L forPowder Coated Aluminium Sections [Minimum 50 Micron thick] of approved colour as in Door, Window, Ventilator Frames, Partitions with one or more rebates and Door Shutters, Aluminium section including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws complete all as specified and as directed. Note: [a] The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I. [b] Panel inserts of Glass / Particleboard / Gauze / Grills will be measured and paid separately at supply only rates. [c] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, Hinges and fixing only of panel inserts ofGlass / Particleboard / Gauze / Grills etc. |
| 23 | Supply only 5mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 24 | Supply only 12mm thick, Prelaminated Particle Board, One Side Decorative Choice Lamination and other side Balancing White, Medium Density, Interior Grade complete all as specified and as directed. |
| 25 | S & F pre-painted Galvalume steel sheets of Trapezoidal profile having pitch 190mm, depth 29mm or Tiled Profile and thickness 0.50mm [Galvalume base-PPGL trapezoidal profile sheets], having tensile strength of 550 Mpa, fixed with aluminium self tapping screws, neoprene and EPDM washers of suitable size in roof covering complete all as specified and as directed. Note: Overlap shall be provided as specified by the manufacturer. |
| 26 | S & F False Ceiling consisting of 16mm thick Mineral Fibre Board of size 600 X 600 X 16mm of make Armstrong [Model No. DUNE RH99], Premium sand textured finish, having humidity resistance of RH99, with Anodised Aluminium snap grid frame work suitable for 600 X 600 mm panel with Aluminium "T" section of size 38 X 25 X 1.50 mm thick for Main Runners, 25 X 25 X 1.5 mm thick for Cross Runners and Angle of size 25 X 25 X 1.50 mm thick along the Walls suspended with and including 4 mm dia, Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position including fixing Mineral Fibre Board to ceiling section with 25 mm dry wall screws at 230 mm centres and complete all as specified. |
| 27 | M & L for 150 mm thick, PCC 1:2:4, Type B-2, using 40mm graded stone aggregate as in Floors/ Hard standing etc, surface finished even and smooth with out using extra cement and spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified and as directed. |
| 28 | M & L for Forming Contraction Joint [Dummy], 65mm deep X 10mm wide, filled with sealing compound and sealed with Sealing Compound Grade "A" for 150mm thick flooring complete all as specified and directed. |
| 29 | M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M & L for rendering to brick / concrete surfaces, 5 mm thick in Cement Mortar 1:4, mixed with water proofing compound as per manufacturers instructions over a backing coat of 10mm thick rendering in Cement Mortar 1:6 and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compoundwill be measured and paid separately. |
| 31 | Supply only integral water proofing compound [ISI marked] of approved make. |
| 32 | M & L for preparing newly plastered Wall surfaces by using vaccume based sanding machineandapplying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surfacecomplete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 33 | M & L for preparing newly plastered Wall surfaces by using vaccume based sanding machineandapplying two coats of premium interior Acrylic emulsion by using auto roller/airless sprayer, over a coat of alkali resistant primer over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surfacecomplete all as specified and as directed. Note:- The contractor shall carryout acrylic emulsion painting & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 34 | M & L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of Acrylic Washable Distemper on wall surfaces by using auto roller/ airless sprayer complete all as specified and as directed. Note:- The contractor shall carryout Distempering works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 35 | M & L for Two coats of Weather proof exterior acrylic emulsion paint over a coat of Alkali Resistant Primer by using auto roller/ airless sprayer on newly plastered Walls/ ceilings, pillasters, bands, borders, soffits of chajjas and projections including necessary preparation of surfaces by using vaccume based sanding machine complete all as specified and as directed. Note:- The contractor shall carryout Weather proof exterior acrylic emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof exterior acrylic emulsion Painting through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 36 | M & L for One coat of Weather proof exterior acrylic emulsion paint by using auto roller/ airless sprayer on old painted Walls/ ceilings, pillasters, bands, borders, soffits of chajjas and projections including necessary preparation of surfaces complete all as specified and as directed. Note:- The contractor shall carryout Weather proof exterior acrylic emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof exterior acrylic emulsion Painting through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 37 | M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 38 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance exceeding 1.5 KM but not exceeding 5 KM complete all as specified and as directed. |
| 39 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One light/ fan/ bell point controlled by one switch on Independent Board including cutting chasing for concealed wiring as required and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 40 | All as per Serial Item No. 39 above but One 3 Pin Socket Outlet 5/6 Amps on Independent Board complete all as specified and as directed. |
| 41 | All as per Serial Item No. 39 above but one 15/16 Amps power point on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor. |
| 42 | S & F Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 43 | S & F Switch Modular type, one module, Single pole, One way, 16 Amps, 230 Volts complete all as specified and as directed. |
| 44 | S & F Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts, complete all as specified and as directed. |
| 45 | S & F Socket Outlet, 3 pin, 16 Amps and 3 pin, 5 Amps, Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed. |
| 46 | S & F Ceiling Rose, PVC body, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. |
| 47 | S & F Square recess mounted Flat Panel LED Light suitable for fixing in 2" X 2" Grid False Ceiling of not less than 3600 Lumens output, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 48 | S & F Energy efficient Sleek LED Mirror Light Fitting of not less than 900 Lumens, 2 feet long Surface & Wallmounted with Acrylic / PMMA diffuser for soft glare free light with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 49 | S & F MCCB DB, VTPN, 4 Way, 415 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs/MCCBs, flush mounted with wall complete all as specified and as directed. |
| 50 | S & F MCCB, FP, 100 Amps, 16 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed. |
| 51 | S & F MCB DB, TPN, 6 Way, 415 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs, flush mounted with wall complete all as specified and as directed. |
| 52 | S & F MCB DB, SPN, 12 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs, flush mounted with wall complete all as specified and as directed. |
| 53 | S & F RCCB, Two Pole, 30mA, 40 Amps for Earth Leakage, Overload & Short- Circuit Protection 230 Volts, 50 Hz complete all as specified and as directed. |
| 54 | S & F MCB, TPN, 100 Amps, 10 KA, "C" Curve, AC, 415 Volts, 50 Hz complete all as specified and as directed. |
| 55 | S & F MCB, TP, 63 Amps, 10 KA, "C" Curve, AC, 415 Volts, 50 Hz complete all as specified and as directed. |
| 56 | S & F MCB, SPN, 40-63 Amps, 10 KA, "C" Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. |
| 57 | S & F MCB, SP, 6 - 32 Amps, 10 KA, "C" Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. |
| 58 | S & F TP&N Enclosure with 3 Pole and Earth Metal Plug & Socket, with andincluding One MCB, TP, 32 Amps, 415 Volts complete all as specified and as directed. |
| 59 | M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLSH Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLSH Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 4 Sq.mm PVC insulated coper conductor cable& one run of 25 mm dia PVC Conduit will be measured as one unit |
| 60 | M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLSH Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLSH Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 6 Sq.mm PVC insulated coper conductor cable& one run of 25 mm dia PVC Conduit will be measured as one unit |
| 61 | M & L for Sub main wiring with 4 runs of single core 10 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLSH Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 32 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLSH Grade earth continuity conductor complete all as specified and as directed. Note: 5 runs of 10 Sq.mm PVC insulated coper conductor cable& one run of 32 mm dia PVC Conduit will be measured as one unit |
| 62 | Supplying, installing, testing and commissioning of 5 Star rated Hi-Wall Split Units Indoor / Outdoor with Cordless Remote Control Unit and with in-built advanced Air Ioniser and Plasma Filters for better indoor air quality with latest Inverter technology, having Eco friendly Refrigerant Gas, Copper Condenser Coil, EER 3.2 of Capacity 1.5 TR, Summer Cool, Dual Rotor Inverter Compressor, Automatic 4D Swing Copper Condenser, BLDC Motor, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable complete all as specified and as directed. Make: Blue Star / Hitachi / Daikin / Carrier / Voltas Note: The rate quoted by the contractor is deemed to include for Powder Coated Mild Steel Fixing Brackets for Outdoor and Indoor Units at any height and Copper tube of suitable size and length, Drain Pipe made of High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm of 25mm dia upto 5m length and making hole in wall for passing of indoor /outdoor cable through core cutting machine. |
| 63 | S & F Electronic wall mounted time delay Voltage stabilizer of 4 KVA Capacity, Automatic Operation, for input variation of 170 Volts to 250 Volts with stabilised voltage of 230 Volts with accuracy of ± 2.5% complete all as specified. Make: V Guard/ Servo/ Kee Line |
| 64 | S & F SP&N Enclosure, Modular type, with 2 Pole and Earth Metal Plug & Socket, with andincluding One MCB, SP&N/ DP, 20 Amps, "C" Curve, 240 Volts, flush mounted with wall complete all as specified and as directed. |
| 65 | Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and as directed. |
| 66 | Supplying, installing/ erecting, testing and commissioning of indoor type heavy duty Class-II Single Box Girder Hand Operated Overhead Travelling [HOT] Crane with chain pulley block and capable to handle main hoist way of 1.0 Tonne load, floor operated by means of hand operation on both sides with all necessary steel supporting structure, crab, shafting including all components/ accessories/ equipment and finished with two coats of synthetic enamel paint, complete all as per manufacturer"s specifications, as directed and as per data given below: |
| 67 | TYPE: Single Box Girder HOT Crane as per IS: 807 & IS:3177 (Latest version) CRANE OPERATION: From floor by chain & pulley for all motions CONTROL : From floor by chain DUTY CLASS : Indoor, Class II , Heavy duty, IS 3177 LIFTING CAPACITY (SAFE WORKING LOAD):1.0 MT (SWL) CLEAR SPAN LENGTH : 7-8 Metres BAY LENGTH :10Metres (Approx) HEIGHT OF LIFT/HOOK HEIGHT :4-5 Metres from floor HOOK CLEARANCE FROM WALL:0.50 Metre on both sides LT Wheel Rail Track Size : on same rail of 50 mm sq bar provided for EOT crane CT Wheel Rail Track Size : 50x50 mm sq.bar |
| 68 | Note 1:- (a) The crane shall be tested stage wise for 25%, 50%, 75%, 100% (full load) and 25% overloadis to be carried out. All materials and manpower required for the testing arrangements is deemed to be included in the quoted rate and nothing extra is admissible. (b) Guard shall be provided all along the length with approach ladders on both sides of crane with hand rail on both the sides of ladder at a suitable level and the ladders should have landing platforms at every 4 to 5m or less (c) Clear span and bay length specified and shown on building are only indicative. The tenderer shall visit the site and as certain exact span and bay length before quoting the rates. (d) Gantry rail made up to 50 mm square bar duly welded to ISMC beam longitudinally painting with 2 coats of epoxy paint over red oxide primer all as specified deemed to be included in quoted rate. (e) Dimensions, capacities/sizes of equipments / accessories mentioned on drawing are minimum to be provided. Prior approval of Accepting Officer shall be obtained for the detailed construction drg of HOT crane and the rates quoted above shall deemed to included such provisions and its accessories before execution of work. (f) The crane should be manufactured as per latest IS standard and safety factors. The final drawing and design of the crane shall be got approved from IIT/NIT and shall be submitted to Accepting Officer before manufacturing of the crane. (g) Guards will be provided with approach ladder on both sides of Long travel at a suitable level and ladders should have landing platforms at both end with guards and side railing. (h) Mechanical stopper will be provided on both side of Main Girder as per manufacturer recommendation. (i) If Any work not specified above, but considered necessary for efficient installation, working and performance of HOT crane shall be deemed to be included in quoted rate. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
