Kerala State Warehousing Corporation Container has published Tender For Re-Roofing Works Of Godown At State Warehouse Pathanamthitta In Pathanamthitta District. Submission Date for this Tender is 10-08-2023. Shed Construction Tenders in pathanamthitta Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Re roofing works |
| 2 | Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 100 metres lead of :Asbestos Sheet |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) of minimum 2mm thickness including cutting, hoisting, fixing position and applying a priming coat of approved steel primer after preparing the surface by using wirebrush or emery paper, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 4 | Providing and fixing Polycarbonate sheet (2 mm thick). Sheet should have protective guard film of 25 micrones minimum to avoid scartches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling/self tapping screws with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc complete |
| 5 | Providing ridges or hips width 120 cm overall width plain Galvalume sheet of 0.50 mm thick.The sheet shall be fixed using self drilling/self tapping screws with EPDM seal, and bitumen washers complete. .The rate inclusive of cost and conveyance of material to site and necessary scaffoldings which required. |
| 6 | Providing and fixing Galvalume sheets ( Supply of Pre painted Alu- Zinc alloy coated steel sheets -55% Aluminium, 43% Zinc, 1.6% Silicons,0.5mm thick-PPGL). Sheet should be supplied in single length upto 12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling screws with corrosion resistant (SDS of brand Patta) of size (5.5 x 55mm) with EPDM seal at top of corrugation complete upto any pitch in horizontal/ vertical or curved surfaces,including providing necessary overlap not less than 200mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and providing ridges including cutting to size and shape wherever required as per direction of engineer in charge, the ridge will be paid separately.The rate inclusive of covering of existing stocks inside godown from falling of dust and covering of roof from raining with tarpauline sheet during the execution of work also the cost and conveyance of material to site and necessary scaffoldings which required.The contractor shall submit the manufacturers test certificates of the roofing sheet before commencing the work and also required to conduct the test on the randomly selected sample from the site by the Engineer-in -Charge to ensure the minimum thickness. |
| 7 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 100 metres lead as per direction of Engineer-in-Charge.In cement mortar.The rate inclusive of cost and conveyance of material to site and necessary scaffoldings which required. |
| 8 | Providing and laying cement concrete on walls,( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 20 mm nominal size).The rate inclusive of cost and conveyance of material to site and necessary scaffoldings which required. |
| 9 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.The rate inclusive of cost and conveyance of material to site and necessary scaffoldings which required. |
| 10 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required. |
| 11 | Providing silicon compoundcovering to G.I. bolts over roofincluding cost and conveyance of all materials required etc. complete |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work, painting over the existing structureafter preparing the surface by using wirebrush or emery paper,all works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
