Fertilisers And Chemicals Travancore Limited has published Tender For Renovation Of B1 Flat Quarters- Phase Ii (B1 Flat 25 To 42) In Fact Udyogamandal Township.. Submission Date for this Tender is 18-08-2023. Building Work Tenders in udyogamandal Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Hacking of CC flooring including cleaning the surface etc. complete as per direction of the Engineer-in-Charge. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge - With cement mortar 1:4 (1 cement : 4 fine sand) |
| 5 | Providing and fixing Chlorinated Polyvinyl Chloride SDR 11 pipes of Astral or equivalent, having thermal stability for hot & cold water supply, including all CPVC fittings, fixing the pipe with clamps at 1.00 m spacing, joining pipes & fittings with CPVC solvent cement, the cost of concealed work for cutting chases and making good the same, making good the walls, testing of joints etc complete as per direction of Engineer in Charge- 20mm dia |
| 6 | Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD . |
| 7 | Supplying and fixing PVC floor trap with strainer (PVC solo grating) of approved brand 110mm size with required provision of outlets and inlets, locking tile, strainer, etc. as per manufactures specifications, cutting and making good the walls and floors, etc. complete. |
| 8 | Cleaning and applying priming coats with water thinnable cement primer of approved brand and manufacture, havingVOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface. |
| 9 | Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat |
| 10 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour,One coat - of exterior grade. |
| 11 | Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 13 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. |
| 14 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia. |
| 15 | Suppling and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete |
| 16 | Applying one coat best approved quality polyurethane clear wood finish one coat to doors, windows etc. after rubbing with sand paper and cleaning well the surfaces at all heights. |
| 17 | Transporting excess spoil earth, gravel, sand, broken stones, split stones, laterite stones, blasted rubble upto 45 DM3 size etc. by lorry to places pointed out upto a maximum distance of 5KM including loading with a lead of 50m and lift upto 1.5m at each loading point etc. complete. |
| 18 | Supplying ,threading /laying and jointing PVC pipes conforming to IS 4985-1981 class IV(6kg/cm2) for internal water lines with all required pvc specials such as tees,bends, elbows, unions,reducers, etc.with clamps including cutting and making good the walls etc. complete - 50mm or nearest OD |
| 19 | Supplying and fixing PVC pipes conforming to IS 4985-2000class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete -63mm or nearest OD . |
| 20 | Supplying and fixing at all levels FRP doors with frames & 4mm etching glass made of glass fibre conforming to IS: 11551 (As per attached technical specifications). |
| 21 | Supplying and fixing Stainless Steel Concealed Stop cock ¾ inch with adjustable wall flange "CERA/ HINDWARE or equivalent type. |
| 22 | Supplying and fixing Stainless Steel angular Stop cock with wall flange "CERA/ HINDWARE or equivalent type |
| 23 | Supplying and fixing Over Head Shower with shower arm and wall falnge with chrome finish (Hindware or similar) |
| 24 | Floor Painting with water based floor paint of approved brand and manufacture of required colour to give an even shade- 2 coat |
| 25 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms- 15 mm nominal bore. |
| 26 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :-610x460 mm bowl depth 200 mm |
| 27 | Supplying and fixing mirror of size 600x450mm and 6mm thick with ordinary plywood backing , 8nos of CPclip.and 2nos of CP hooks for fixing on wall |
| 28 | Supplying and fixingStainless steel soap tray size150X100mm |
| 29 | Providing and laying Double charge Vitrified tiles polished finish in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints of Size of Tile 600x600 mm |
| 30 | Providing and laying rectified Glazed Ceramic Antiskid floor tiles (thickness to be specified by the manufacturer),of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm excluding pointing the jointsetc., complete. |
| 31 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 32 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 34 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15 mm nominal bore. |
| 35 | Rendering skilled labour inclusive of all charges of labour and hire for tools requiredfor executing skilled work at all levelswith materials supplied from Companyin connection with civil works as per the direction from the Engineer-in-chargeinall shifts including Sundays and Holidays. |
| 36 | Rendering male coolie inclusive of all charges of labour and hire for tools required for cleaning drains, collecting and dumping unwanted materials in low lying areas as directed and transporting bricks, cement etc. from stores, lifting to various heights, mixing mortars and castables, providing scaffolding or any other works as per the instructions of the Engineer-in-chargeinall shifts including Sundays and Holidays. |
| 37 | Dismantling of walls of any thickness made out of brick, laterite or rubble in cement mortar including stacking of serviceable materials for reuse at places pointed out and disposal of debris to the low lying areas in Township within a lead of 150M as directed. |
| 38 | Chipping and removing portions of existing RCC work carefully without damaging the remaining structure and removing the debris at places pointed out within a distance of 150M. |
| 39 | Taking down shutters of doors, windows or ventilators including removal of hinges and all other fittings and stacking materials in Township office. |
| 40 | Supplying best approved quality iron screws of20mm long or nearest available size (4,5, 6 & 7guage) |
| 41 | Supplying best approved quality iron screws of 25mm longor nearest available size(5, 6, 7& 8guage) |
| 42 | Supplying stain less steel butt butt hinges 75 mm |
| 43 | Supplying stain less steel butt butt hinges 100 mm |
| 44 | Supplying best approved quality bright finished iron hooks and eyes of75mm or nearest size. |
| 45 | Supplying best approved quality Aluminium tower bolts- 200 mm long x 10mm dia. |
| 46 | Providing 3mm thick plain glass for glazing ofshutters, partition etc. with teak wood fillet, putty etc.on new work / replacing ofbroken glass panes in existing shutters etc including dismantling the broken glasses, if any. |
| 47 | Fixing fabricated / repaired, doors / windows/ ventilator shutters to existing frames with all necessary hard ware fittingsat all levels.(labour only) |
| 48 | Brick work in CM 1:5 with country burnt bricks (21x10x6.5cmor nearest size) for superstructureupto 5M heightfromthe plinth level. |
| 49 | Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level. |
| 50 | Providing form work to RCC / CC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for foundation footings, machine equipment foundations and pedastals over foundation footings, sides of trench walls, plinth beams and rafts, pile caps and mass concrete works etc.at all levels in township Area. |
| 51 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeat all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 52 | RCC or CC work 1:2:4 mix, using 20mm nominal size broken stone excluding cost of form work and reinforcement . |
| 53 | Supplying and fixing pure polyester powder coated coloured aluminium frame work of extruded sections and approved brand/manufacturer including mitring the joints, fixing the frame work with necessary screws, drilling holes in floors, walls and ceiling, providing plugs for fixing screws, finishing the sides of packing between frame work and wall/ceiling with plaster of paris, cost of timber packing if necessary, rubber lining for air tightness, providing corner cleats, etc. complete as per standard practice for glazed doors, windows, side hung as well as sliding windows, ventilators, partitionsetc. including all hinges, pivots, tower bolts, peg stays, fixtures, and pure polyesterpowder coatedaluminium approved brand beadings, handles & approved locking system at all levels.(Payment will be given for the weight of aluminium sections only) |
| 54 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With toughned glass panes of 4.0 mm thickness. |
| 55 | Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour-Two coats |
| 56 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coat- of exterior grade |
| 57 | Painting one coat with best approved quality red oxide metal primer after scraping and cleaning the surface at all heights of steel grills,bars,structures etc. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
