|
| 1 | Lump sum price worked out by the contractor for \"BUILDING WORKS\"as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 27(R) |
| 2 | Lump sum price worked out by the contractor for \"SITE CLEARANCE, EXCAVATION & EARTH WORK\"as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 29 |
| 3 | Lump sum price worked out by the contractor for \"INTERNAL WATER SUPPLY \"as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 30(R) |
| 4 | Lump sum price worked out by the contractor for \"INTERNAL ELECTRIFICATION\"as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 34 |
| 5 | Lump sum price worked out by the contractor for \"ROAD, PATH AND HARDSTANDING\" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 36 |
| 6 | Lump sum price worked out by the contractor for \"SEWAGE DISPOSAL\"as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 38 |
| 7 | Lump sum price worked out by the contractor for \"AREA DRAINAGE\"as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES B/F from Sl page No. 39 |
| 8 | Lump sum price worked out by the contractor for \"RETAINING WALL\"as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 40 |
| 9 | Lump sum price worked out by the contractor for \"EXTERNAL WATER SUPPLY\"as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 41 |
| 10 | Lump sum price worked out by the contractor for \"EXTERNAL ELECTRIFICATION\"as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 42 |
| 11 | Lump sum price worked out by the contractor for \"FIRE FIGHTING SYSTEM\"as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 44 |
| 12 | Lump sum price worked out by the contractor for \"SOLAR WATER HEATER, WATER COOLER & RO\"as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 46 |
| 13 | Sch \"A\" PART-XIII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as \"Rs 0.00\" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule. |
| 14 | INTERNAL WATER SUPPLYS&F 15 mm bore, fancy type, CP brass bib cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make -Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx \"C\". |
| 15 | S&F 15 mm bore, fancy type, CP brass angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make -Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx \"C\". |
| 16 | S&F of CP wall mixer 3 in 1 system including 1.5 m long tele shower and overhead shower of size 150x150 mm with wall flange ISI marked complete all as specified and directed.Make -Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx \"C\". |
| 17 | S& F overhead shower 150x150 mm of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed.Make -Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx \"C\". |
| 18 | S&F health foucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed.Make -Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx \"C\". |
| 19 | INTERNAL ELECTRIFICATIONS & F modular type 25/32 A SP MCB, conforming to IS 60898- 1: 2002 complete all as specified in IS 732: 2019 and directed. |
| 20 | S & F modular type 3 pin 25/32 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed. |
| 21 | S&F 20 W surface / wall mounteddecorative type LED batten capable of delivering 2000 lumen, having PC diffuser, luminous efficacy of > 120 lumen/W, CRI = 75, PF > 0.9, CCT 6500K, free of glare independent isolated SMPS based constant current electronic LED driver with THD < 15%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 120- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 22 | S&F 10 W 3-star (EEL) T-shape lamp capable delivering 1000 lumen having luminous efficacy of > 120 lm/W, starting time < 0.5 s, CRI = 75, CCT 6500K, PF >0.9, input voltage range 120- 270 V, input frequency 50- 60 Hz and B22 socket complete all as specified and directed. |
| 23 | S&F 10 W surface / wall mounteddecorative type LED batten capable of delivering 1000 lumen, having PC diffuser, luminous efficacy of > 120 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, free of glare independent isolated SMPS based constant current electronic LED driver with THD < 15%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 120- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 24 | S&F 12 W surface mounted round shape LED downlight, aluminium housing and high translucent frosted plastic diffuser, capable of delivering 1200 lumen. having minimum luminous efficiency > 120 lumen/W, CCT 3500K, CRI = 75, high quality polycarbonate diffuser, input voltage range 120- 270 V, input frequency 50- 60 Hz, including electrical connection complete all as specified and directed. |
| 25 | S&F 25 W street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of = 120 lumen/W, integral SMPS based constant current electronic LED driver with THD < 15%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficacy polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. |
| 26 | S&F 6.5 W bulk head LED capable of delivering 700 lumen, LED efficacy of = 120 lumen/W,CCT 6500K, CRI =75, high quality polycarbonate diffuser, input voltage range 120- 270 V, input frequency 50- 60 Hz, including electrical connection complete all as specified and directed. |
| 27 | ROAD & FOOT PATHM&L for 150 mm thick WMM (Wet Mix Macadam) (compacted thickness) laid in two layers of 75mm thick each conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted sub grade surface of soling as specified in clause 406 3.5 of MORTH specification and necessary lateral support and formwork if required complete all as specified and directed. |
| 28 | M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows tec. and the like n. exc. 15 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with 20% glass beds (intermixed) spread and laid by automatic mechanical machine engine at approximate temprature 160 dfegree celcius with special applicator machine as per manufacturers instruction complete all as specified and directed. |
| 29 | SEWAGE DISPOSALProviding lowering, laying, aligning & fixing in position and joining at all level/depths full round HDPE DWC Pipes (Double Wall corrugated) of 200mm dia bore with reqd jointing accessories of SN-8 grade as per IS-16098 (Part-2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings complete all as specified and directed. |
| 30 | S&F Conventional type Septic tank designed for 100 users to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter as per TD No. CEAA/TD/78Sheet No. 1/2 & 2/2. Note:- (1) Effluent from septic tank to bedisposed off in soakage pits. (2) Septage from septic tank is to be pumped out once in a year and disposed off safely in nearby STP / Oxidation pond / Sludge drying beds. |
| 31 | S&F for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 3 M effective depth. |
| 32 | EXTERNAL WATER SUPPLYSupply and lay pipe ductile iron both ends flanged and drilled, ISI marked, S/S including specials, class \"K-7\"\", with internal cement mortar lining in nominal bore dia of bore 100 mm dia complete all as specified and directed. |
| 33 | Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ringon both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 100 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed. |
| 34 | Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ringon both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 80 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed. |
| 35 | M&l for DI fittings such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \"Y\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs for 100mm to 150 mm bore pipe complete all as specified & directed |
| 36 | M&L for Construction of new brick Masonary valve chamber of size 900 X 900 X 900 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 230 mm thick brick walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed. |
| 37 | EXTERNAL ELECTRIFICATIONSSupply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl suitable size required steel glands and carry out internal connection with suitable copper bus bar all as specified and direced by Engineer-In-Charge, the panel board shall be comprising of the following :- |
| 38 | (a) Aluminium bus barcap 200 Amp-04(b) MCCB four pole with thermal magnetic release adjustable type with breaking capacity25 KA 100 Amp- 01.(c) MCCB four pole with thermal magnetic release adjustable type with breaking capacity25 KA 40 Amp- 01.(d) MCCB four pole with thermal magnetic release adjustable type with breaking capacity25 KA 63 Amp- 01.(e) MCB TPN 16 to 32 Amps(f) Digital Voltmeter96 mm X 96 mm flush secure Panel mounting type 0-500 Volt with selector switch - 01(g) Digital Amp meter96 mm X 96 mm flush secure Panel mounting type 0-400 Amps with selector switchwith CT - 01(h) RYB neonindicatinglamp setof three- 01Notes:- (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel.(ii) MCCB shall be fixed in suitable sheet metal enclouser.(iii) Danger notice plate (02 Nos) LT size 20cmx 15cm shall be fixed on the panel.(iv) Contractor provided power coated finish paint on panel. |
| 39 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I with connected to earth test point & to main switch board with & including adequate quantity of charcoal and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe fpr suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mess including necessary earth work and PCC (1:3:6) type C1 for earth pit and 40mm thick precastRCC cover in cement concrete 1:2:4 type B1, with 3 Nos 8mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and directed NOTE: Item includes the cost of earth lead and GI protection pipe up to 7.5 m.GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately. |
| 40 | M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by meansof nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GIprotection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 41 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I with connected to earth test point & to main switch board with & including adequate quantity of charcoal and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe fpr suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mess including necessary earth work and PCC (1:3:6) type C1 for earth pit and 40mm thick precastRCC cover in cement concrete 1:2:4 type B1, with 3 Nos 8mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and directed NOTE: Item includes the cost of earth lead and GI protection pipe up to 7.5 m.GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately. |
| 42 | Supply, fixing installing and commissioning of octagonal Galvanized street light pole 8 mtr long, Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm and base plate dimensions 200x200x16mm, foundation bolt 4x M20 X 600mm, single arm bracket, 1100 volts grade, including cost of nuts and bolts and all accessories as supplied by the foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement, terminal plate consisting of 02 Nos 10 A, 4 pole natural links including connecting atc with suitable connecting arrangement for 2 Nos, cost of RCC 1:1.5:3 for foundation of size 0.7m x0.7m x 1.8m with minimum 8 Nos 12 mm dia longitudinal MS reinforcement rods with rings of8mm dia not more than 200mm cement concrete for fixing the pole with labour and material required to complete the job complete all as specified and directed. |
| 43 | Note: - Earth work, foundation, connected bolts and nuts, single arm bracket and connected accessories deemed to be included in the quoted rate.(a) Excavation in post holes in any types of soil, returning filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mts from the starting point.(b) PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in foundation including form work.(c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work.(d) PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in base.(e) Painting of poles with one coat of primer and two weather proof paint including oil enamel paint for strip marking up 1.5 mtr height in the pole all as specified. |
| 44 | S&F 1100 volts grade heavy duty single core cable PVC insulated sheathed with stranded copper cable conductor wire FRLS of size 3x2.5 sqmm complete all as specified and directed. |
| 45 | S&F MCCB of curent rating 100 Amps with thermal release 4 pole 415 V 25 KA repturing capacity including and fitted in LT metal enclosure of size 400x400x400 mm floor mounted outdoor CPRI approved factory fabricated dust and vermin proof made out of CRCA sheet 3.15 mm thick and with angle iron 40x40x6 mm and 4 Nos legs on angle iron with front openable shutter on front side with locking arrangement and legs grouted in PCC 1:2:4 type B-1 (20 mm graded stone aggregate complete all as specified and directed. |
| 46 | SOLAR WATER HEATERSupply, installation, testingand commissioning of Solar Water Heating System indirect type with heat exchange provision of capacity 500 litre with electric backup heater of 3KW capacityper day at temprature 60 degree centigrade to 80 degree centigrade as per manufacturer\"s design suitable flat plate collectors having insulation of rock wool/mineral wool 50mm thickness at bottom and 25mm thickness on sides with toughened/tempered glass of 4mm thick and cladding with aluminium sheet 26 SWG, Insulated stainless steel Hot water storage tanknon pressure capacity as per manufacturer\"s design of suitable gauge thick stainless steel plate ( having insulation of rock wool/mineral wool 100 mm thick and cladding with alum sheet 24 SWG),Provisions of electrical back up with minimum 3 KW heating element , Heat exchanger shall be cage type and made of stainless steel tube, and Rotational moulded polyethylene Cold water storage tank of same capacity (cylindrical vertical with closed top) tripple layer wall construction hoisted and fixed in position with ball valve of suitable size alongwith stands for collectors, staging of suitable height (for easy flow of water) for cold water tank made out of 50x50x6mm angle iron with PCC (1:2:4) as required complete with temprature gauge 0 to 100 degree centigrade, brass gate valve for hot and cold water pipes, horizontal type strainer on incoming water line, complete all as specified and directed. |
| 47 | REVERSE OSMOSIS (RO)Supply, installtion, testing and commissioning for RO 150 LPH of raw water pump, sediment cattridge filter, high pressure pump, antoscallant cartridge systems (01 set), Reverse Osmosis system with FRP housing incl pressure gauge, flow indicator and pressure switch connected complete all as specified and directed. |
| 48 | WATER COOLERS&F voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 140 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA complete all as specified and as directed. |
| 49 | FIRE FIGHTING SYSTEMSupply, installation, testing and commissioning of electric driven Booster Pump to deliver 450 LPM flowrate at 30 mWC head and suitable for automatic operation and consisting of following complete with accessories all as specified and directed:- |
| 50 | [i] Horizontal type, centrifugal, split-casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal, etc. conforming to IS 12469: 2019, suitable to deliver 450 LPM flowrate at 30 MWC head.[ii] Suitable HP squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, having IE3 efficiency and suitable for operation on 3- Ph, 415 V, 50 Hz AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class \"F\" insulation, conforming to IS 12615: 2018.[iii] MS fabricated common base-plate, coupling, coupling guard, foundation bolts, etc. complete with accessories as required.[iv] Suitable cement concrete foundation duly plastered with anti vibration pads. |
| 51 | NOTES:- [i] The pump shall be capable of furnishing not less than 150% rated capacity at a head of not less than 65% of the rated head.[ii] The shut-off head shall not exceed 120% of rated head.[iii] The coupling guard shall be of zero access type.[iv] The quoted rate shall include providing and fixing of vibration pad, common base plate, foundation bolts, grouting etc. [v] Pump sets shall be as per NFPA-20[vi] Pump sets shall be installed as per IS 15301: 2003 |
| 52 | Supply, installation, testing, and commissioning of Fully automatic DOL starter, suitable for the booster pump, complete with contactors, push button, LED type indicators, auto/manual selector switch, overload protection, current sensing type single phase preventer complete with all accessories and wiring etc.with ncomplete all as specified and directed. |
| 53 | M&L for 1.1 kV grade copper conductor, 6 sqmm 3 core, XLPE insulated armoured cable conforming to IS 7098-1: 1988, having stranded aluminium compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed. |
| 54 | S&F of CL#150 rated three-piece design 25 mm NB Cast iron (CI) Straight pattern ball valve, conforming to IS 9890: 1981 and tested as per BS 6755-1, having Cast iron body, Stainless steel AISI 304 ball, renewable PTFE seat & gland packing, CS fastners & lever having screwed / socket weld end connection with accessories complete all as specified and directed. |
