Military Engineer Services-MES has published Tender For Special Repair / Renovation Of Block A, B And C Special Repair Of Flooring By Kota Stone And Addl / Altn Of Chequered Tiles At Assembly Area And Mathematical Garden Of School Building In Kendriya Vidyalaya No-03 Under Ge (West) Jalandhar C. Submission Date for this Tender is 07-08-2023. Building Work Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete. |
| 2 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any morter complete. |
| 3 | M & L for 75mm thick Cement concreteas in sub base of floor type E2 1:5:10 (using 40 mm graded crushed stone aggregate) complete. |
| 4 | M & L for Machine cutkota stone slab flooring 20-25mm thick, size not less than 550mm x 550mm machine cut over and including 15mm thick screedbed in cement mortor 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing to give high gloss finish by machine complete as specified by the Engr in Charge |
| 5 | All as per serial item No 04 above but in skirting portion over & including 15mm thick backing plaster in CM 1:3. |
| 6 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete. |
| 7 | M & L for applying neat cement slurry @ 3.0kg of cement per sq. metre complete |
| 8 | M & L for coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layer in CM 1:6 complete. |
| 9 | All as per serial item No 08 but in skirting portion with 10mm thick backing plaster in cement mortor 1:4. |
| 10 | M & L for Acid resistant tiles 15mm thick vitreousceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors and dado at lab counters. |
| 11 | Taking down chowkats or frames with shutters (with out taking off shutter from the frame) of any description alongwith fittings exc 1.5sqm but n.exc 4 sqm each complete. |
| 12 | Taking down Shutters of any descriptionexc 1 sq. m and n exc 2 sq. m each complete. |
| 13 | Taking down shutters of any descriptionexc 1 Sqm and not exc 2 sqm each and refixing in same opening after necessary repairing complete. |
| 14 | S&F pressed steeldoor framewith one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm complete. |
| 15 | M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in filling of pressed steel frame, hold fasts and similars articles complete. |
| 16 | Cutting holes in brick walls incement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required built in cement motar in brick wall depth of embedded portion of holdfast exc half brick but n exc one brick complete. |
| 17 | S&F2nd class hardwood factoy made plain,framed,panelled shutters (two panel) 35mm thick, with lock rails and panel of 9mm B. W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS : 1003 (Part-I), kiln seasoned and chamically pressure treated. |
| 18 | S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm in each pane incl hacking out old broken glass complete. |
| 19 | M&L mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guardbars, grills bolts etc and similar conforming to Fe-290 Gde -E- 165 complete. |
| 20 | S&F Butt hinges, medium weight cold rolled 100 mm size complete. |
| 21 | S&F aluminium anodised barrel tower bolts of extruded section 200mm long all as specified |
| 22 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete. |
| 23 | S&F aluminium alloy anodised sliding door bolts 250mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified. |
| 24 | M & L for preparation of old plastered surfaces of wall and applying one coat ofPlastic emulsion paint, over surfaced of any description over 10cm girth or width, not otherwise described complete. |
| 25 | M & L for preparation of old plastered surfaces of wall and applying two coat ofPlastic emulsion paint, over surfaces of any description over 10cm girth or width, not otherwise described incl complete removal of existing treatment. |
| 26 | M&L for preparation of new painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces complete. |
| 27 | M & L for applying one coat of synthetic enamelled paintincluding preparation of old decoratedsteel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge |
| 28 | M & L for applying two coats of synthetic enamelled paint over one coat of pink primer including preparation of new wooded surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge |
| 29 | M & L for applying one coat of synthetic enamelled paintincluding preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge |
| 30 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft or loose soil complete. |
| 31 | Removing excavated soils to a distance exceeding 50 M and not exceeding 100 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete. |
| 32 | M&L 75mm thick plain cement conncrete 1:4:8 type D2 (using 40mm graded stone aggr ) as in sub base complete all as specified and directed. |
| 33 | M & L for 25mm thick Sand filling under floors or in foundations including watering and consolidation |
| 34 | M & L for 60 mm thick, M 35 grade, Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS-15658- 2006 with grey cement and no pigment complete. |
| 35 | M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm gradedstone aggregate) cast in situ inkerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work. |
| 36 | S & F forcoloured chequered cement concrete tiles with pigment of size 20cm x 20cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors over& including screed bed or bedding layer of mortar 20mm thick in cement mortor (1:6) complete. |
| 37 | M&L for repairing of R.C.C projections, chajjias, roofs, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation. Scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforced with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 75mmncluding necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge. (Note: Cost of form work and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
