Tamil Nadu Police Housing Corporation Limited-TNPHC has published Tender For Special Repair Works To The Mess, Admin, New And Old Barracks Building For Imparting Basic Training To The Newly Recruited Pcs At Permanent Prs Navalpattu In Trichy District For The Year 2023-2024. Submission Date for this Tender is 01-08-2023. Barrack Tenders in trichy Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt. |
| 2 | 41) Painting 2 coats - New "iron work" |
| 3 | 47) Supplying and fixing of Alu. Towel rail 75 cm long |
| 4 | 52) Supplying, laying, fixing andjointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia |
| 5 | b. 25 mm dia |
| 6 | Electrical arrangements 69) Supplying and fixing of 15 Amps3 pin Power plug socket |
| 7 | 76) Supplying and fixing of 8 SWG G.I. wire |
| 8 | 112) Supplying and fixing of Exhaust Fan 300 mm dia |
| 9 | Annexure 2.1.1) Supplying and filling the basement with gravel |
| 10 | 2.1.3) Supplying and filling in foundation and basement with Crushed stone sand |
| 11 | 3.1.1) C.C.1:5:10 using 40mm size HBSJfor Foundation & Basement using crushed stone sand |
| 12 | 3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture |
| 13 | 6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼" x 2 ¾ ") using crushed stone sand with Admixture |
| 14 | 9.6.1) Brick work in C.M. 1:6using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼" x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor |
| 15 | b. In First Floor |
| 16 | 10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement |
| 17 | 15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor |
| 18 | 22.3.5) Supplying and fixing of stainless steel Padlock Latch 3" size, 2mm thick for Cupboard shutters |
| 19 | 23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings |
| 20 | 28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture |
| 21 | 33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture |
| 22 | 38.4.3) Painting the old walls and ceiling with one coat of Oil Bound Distemperincluding thorough scrapping |
| 23 | 44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe |
| 24 | 50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand |
| 25 | 50.7) Supplying and erection of Precast RCC pillar in M20 Grade concrete of size 150x150x2400mm with necessary reinforcement, labour charges for casting, curing conveyance and erection |
| 26 | 52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTMpipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia |
| 27 | 53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16") |
| 28 | 53.5.2) Supplying and fixing of C.P waste coupling with waste hose from Wash Hand basin |
| 29 | 54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body) |
| 30 | 54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body) |
| 31 | 55.2.1) Supplying and fixing of C.P waste coupling with Waste Hose from Flat back Urinals |
| 32 | 58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type "B". a. 110 mm dia. |
| 33 | b. 75 mm dia |
| 34 | 58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type "A" for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc., |
| 35 | 60.1) Supplying and fixing of PVC Nahani trap (4way/2way) |
| 36 | 61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe |
| 37 | 64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose |
| 38 | 68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.(Open wiring) |
| 39 | 75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep |
| 40 | 75.1.3) Supplying and delivery of Fan Step Regulator 100W - 1 Module - Lower end |
| 41 | 75.1.4) Supplying and fixing of Fan condensor |
| 42 | 77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed |
| 43 | 100) Supplying and fixing of 9 watts LED Bulb |
| 44 | 101) Supplying and fixing of 25 watts LED with street light fittings |
| 45 | 101.1) Supplying of 20 feet street light pole complete set with necessary accessories such as 2" dia MS pipe of 3mm thick 10 feet height and 1½" dia MS pipe of 3mm tk 10 feet height etc., |
| 46 | 102) Supplying and fixing of 4"18 watts crystalLED tube light fittings |
| 47 | 102.1) Supplying and fixing of Cool day light 4 feet 36 watts tube light |
| 48 | 106) Supplying and fixing of 5 Amps 5 Pin Flush type wall socket |
| 49 | 107) Supplying and fixing of 5 Amps Flush type wall switch |
| 50 | 114) Supplying and delivery of followingPVC Aluminium armoured LTUG cable a) 2 core 10 Sqmm PVC Aluminium armoured LTUG cable |
| 51 | b) 4 core 10 Sqmm PVC Aluminium armoured LTUG cable |
| 52 | 115) Labour charges for laying of PVC Aluminium armoured LTUG cable below ground level |
| 53 | 116) Labour charges for laying of PVC Aluminium armoured LTUG cable above ground level |
| 54 | 120.2) Labour charges for Removing of Horizontal shaft, centrifugal pumpset (Coupled / Monoblock) Above 3 HP upto 7.5 HP in Borewell / openwell |
| 55 | 120.3) Labour charges for Removing of Submersible Pumpset in Borewell / openwell upto 5 HP |
| 56 | 120.4) Labour charges for Refixing of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) (Above 3 HP upto 7.5 HP in Borewell / openwell |
| 57 | 120.5) Labour charges for Refixing ofSubmersible Pumpset in Borewell / openwell upto 5 HP |
| 58 | 120.6) Rate for flushing of borewell of 6" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors (i) 600 Cfm ( 100 /150 PSI) |
| 59 | 120.7) Rewinding of Upto 5 HP submersible pumpsets including rewinding charges, cost for bearing and labour charges for removing and refixing etc |
| 60 | 120.8) Rewinding of Upto 7.5 HP Sewage motor pumpsets including rewinding charges, cost for bearing and labour charges for removing and refixing etc |
| 61 | 121.1) Supplying and delivery of three phase panel board of direct online starter with two level guard and auto start 2 HP |
| 62 | 121.2) Supplying and delivery ofDirect online starter with single phasing preventor 2 HP for Monoblock motor |
| 63 | 122) Supplying and fixing of following diaof the GM specials as per IS BS 5154 and related IS Specifications a) 50mm dia GM Non Return valve |
| 64 | 123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset |
| 65 | 125) Supplying, laying and fixing of following dia UPVC Pipe Below Ground level a) 50mm dia UPVC Pipe |
| 66 | 127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump |
| 67 | 145) Supplying and fixing of CP Angle cock tap |
| 68 | 148) Supplying and fixing of Brass Chromium Plated Pillar Tap 15mm dia (Heavy Type) |
| 69 | 149) Supplying and fixing of (Soap tray) Granite slab |
| 70 | 154) Supplying and fixing of TNEB Meter Board suitable for 3 Phase 100A service connection |
| 71 | 154.1) Supplying and fixing of TNEB Meter Board suitable for 3 Phase 63A service connection |
| 72 | 162) Supplying and fixing of 120W LED Street light fitting |
| 73 | 168) Supplying and fixing in position of Barbed wire 10 gauge 2 ply and four pronged including cost of all materials and labour charges |
| 74 | 169) Supplying and fixing of PVC Hylem sheet 3mm thick |
| 75 | 361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick |
| 76 | 378.2)Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tkusing crushed stone sand |
| 77 | 572) Supplying fabrication and fixing in position of mild steel angles for truss including cost of all materials and labour charges |
| 78 | 573) Construction of Inspection chamber of size 60x60x75 cm |
| 79 | 574) Supplying and fixing of 250 Amps 4 Pole MCCB |
| 80 | 575) Servicing the 1 No. of Dosing Pumpset for RO Plant and Replacing 1 No. of 1242 Vessel, 1 No. of 25 NB valve |
| 81 | 796.2) Painting the old outer walls with one coat of Exterior emulsion paint without primer including thorough scrapping |
| 82 | 800.5) Dismantling and clearing away of Floor finish and dadooing walls in cement mortar with Mosaic tiles / Glazed Tiles / Clay Tiles / Cuddapah slabs |
| 83 | 800.9) Dismantling, clearing away and carefully stacking materials useful for reuse for Doors and Windows including removal of frames, hinges and fastenings |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
