Office of the Director Swach Project has published Tender For Repairing Of Girls Hostel Semari District Udaipur. Submission Date for this Tender is 31-07-2023. Building Work Tenders in udaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Lime, Fly ash Stabalised soil sub-base (Construction of Sub-base using lime- fly ash admixture with granular soil, free from organic matter/deleterious material or clayey silts and low plasticity clays having PI between 5 and 20 and liqiud limit less than 25 and commercial dry lime, slaked at site or pre-slaked with Cao content not less than 50%, fly ash to conform to gradation as per clause 4.3 of IRC: 88-1984, lime + fly ash content ranging between 10 to 30% the minimum un-confined compressive strength and CBR value after 28 days curing and 4 days soaking to be 7.5 kg/sq, cm and 25% respectively, all as specified in IRC:88-1984) (PWD BSR 2022 Item No. 4.18) |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excaveted soil as directed with in lead of 50 mtr All Kind of soil (PWD BSR 2022 Page No B-1/44 Item No. 1.6) |
| 3 | Sand Filling in wells complete as per drawing and technical specifications (PWD BSR 2022 Item No. 12.21) |
| 4 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position with cement mortar 1:3 (1 Cement:3 Coarse Sand) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc as per direction of engineer-in-charge (length of finished kerb edging shall be measured for payment) (precast CC kerb stone shall be approved by engineer in charge)(PWD BSR 2022 Item No. 17(7))) |
| 5 | Painting Two Coats on New Concrete surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
| 6 | Volleyball Court Pole and Net |
| 7 | Renewing Glass panes, with putty and nails wherever necessary : 4 mm thick plain glass panes (PWD BSR 2022 Page No. B - 150, Item No. 13.4.1) |
| 8 | Providing and Fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making god etc complete (PWD BSR 2022 Page No. B - 177, Item No. 16.8) |
| 9 | Providing and fixing aluminium U shape handle of size 100 mm with SS screws etc. complete as per direction of engineer-in-charge Anodized (AC 15) aluminium (PWD BSR 2022 Page No. B - 177, Item No. 16.9.1) |
| 10 | Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap (PWD BSR 2022 Page No. B - 218, Item No. 1.9). |
| 11 | Providing & fixing Indian type white glazed vitreous China 1st quality W.C.Orissa pan (IS : 2556) with 100mm vitreous china P or S trap including cutting & Making good the wall & floor size 580 x 440mm. (PWD BSR 2022 Page No. S-1 Code no. 1.2.2) |
| 12 | P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Size 500x400mm (PWD BSR 2022 Page No. S-223 Code no. 1.45.1) |
| 13 | P & F 1st Quality WVC pedestral for wash Basin (PWD BSR 2022 Page No. S-222 Code no. 1.40) |
| 14 | P & F WVC wash basin (1st quality, I.S.: 2556 mark) of approved make with C.P. pillar cock (I.S.: 8934 mark) & 32mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 580 X450 mm(PWD BSR 2022 P No S-1/221 I N1.36.4) |
| 15 | P & F rigid PVC Pipe (IS: 4985 mark) class II/(4 Kg/Cm2) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. (PWD BSR 2022 S -247, 3.16.3) 110 mm |
| 16 | 75 mm |
| 17 | P & F GI pipes (Internal works) with GI fitting excluding Union (IS 1239 mark) and MS clamps, including cutting and Exposed on wall (PWD BSR 2022 S -229, 2.1.1, 2.1.3)15 mm dia nominal bore B class |
| 18 | 25 mm dia nominal bore B class |
| 19 | Supply of GI unions (IS) for pipe fitting(PWD BSR 2022 Pno S-237 Ino 2.32.1, 2.32.3)15 mm Dia |
| 20 | 25 mmDia |
| 21 | P & F Bib cock (IS : 8931 mark) superior quality of approved make Brass 400 grams. 15mm ( (PWD BSR 2022 Page No. S.232 Code no. 2.7.3). |
| 22 | P & F Fill way valve (IS : 778 mark or wheel valve of approved make. Gun metal 15mm. ( (PWD BSR 2022 Page No. S.233 Code no. 2.15.1) |
| 23 | P & F Flush cock /Flush Valve (IS : 9758 mark For WC of approved Quality make cp brash exposed 25 mm nominal bore( (PWD BSR 2022 Page No. S.233 Code no. 2.14.3) |
| 24 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked) (PWD BSR 2022 Page No. S.233 Code no. 2.12.1) |
| 25 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casingpipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 100 mm dia Nominal bore. |
| 26 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 100 mm Nominal bore of pipe |
| 27 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 150 mm Nominal Bore. |
| 28 | S & F tube well cover ofM.S.sheet (6mm thick) with nuts and bolts complete for casing size: 100mm dia |
| 29 | Installation of India mark II hand pump set, complete on existing plate form. |
| 30 | Constructionof 185 cm. dia platform as per approved design and drawing of UNICEF. |
| 31 | Supplyingof India mark II hand pump set completemarked with cylinder and ten connecting rods etc. IS 1239 |
| 32 | Supplying and installation of 32 mm dia G.I. pipe medium class IS 1239marked in 3m length including all accessories and fittings required for installation of hand pump. |
| 33 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
